Connect to Server via SMB does not work under 10.5
Hi- I have a feeling that my account has to be reset server-side, but I'd enjoy some feedback. I still use a dual (1gHz) Quicksilver G4 which is solid as a rock and still adequate to my needs. Apart from an overall seeming sluggishness, I have a very serious problem: I am one of 7 Macs on a much larger Windows network and connecting to the various servers and directly to my Windows desktop using SMB has always worked great. Up until yesterday. After upgrading to 10.5 from 10.4.10, I couldn't get on to any of the servers, I checked the network setting and noted that they reverted to AFP. I enabled SMB and still can't get onto any of our network servers. I am, however, able to get into the Mac Public\Drop Box from the WIndows computer, but not vice-versa. I have already verified and repaired permissions, etc. Solutions, suggestions? Patch forthcoming?
Same problem with my Nokia 6650d, also after Ovi upgrade. Any hints?
Similar Messages
-
Hello to all, there are two confliting articles about this topic:
1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
Regards, EEOC.Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?
Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using. -
Flash player does not work under one user account.
Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FSAny update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts??? -
Nautilus-open-terminal does NOT work under x86_64
I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menushaohao wrote:I found the latest nautilus-open-terminal v0.9-1
http://aur.archlinux.org/packages.php?ID=5224
does NOT work under x86_64!
There was no open-terminal menu item in the context menu
I've recompiled almost 40 days ago and i've had no problem at all.
Have you tried logging out before trying? -
JCombox does not work under linux (fedora) could you help me???
Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
private JPanel OutputSimSet;
private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
public Test()
super();
//initializeComponent();
contentPane = (JPanel)this.getContentPane();
jTabbedPane1 = new JTabbedPane();
Main = new JPanel();
OutputSimSet = new JPanel();
Test = new JPanel();
ScriptGenTab = new JPanel();
ResultTab = new JPanel();
SimResult = new JPanel();
jComboBox1 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
jComboBox2 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
// jTabbedPane1
jTabbedPane1.addTab("Main", Main);
jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
jTabbedPane1.addTab("Simulation Result", ResultTab);
jTabbedPane1.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent e)
jTabbedPane1_stateChanged(e);
// contentPane
contentPane.setLayout(new BorderLayout(0, 0));
contentPane.add(jTabbedPane1, BorderLayout.CENTER);
// Main
//Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Main.setLayout(new BorderLayout(0, 0));
Main.add(OutputSimSet,BorderLayout.NORTH);
OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
OutputSimSet.add(Test, 0);
Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Test.add(jComboBox1,0);
//ResultTab
ResultTab.setLayout(new BorderLayout(0, 0));
ResultTab.setBorder(new TitledBorder(""));
ResultTab.add(SimResult, BorderLayout.NORTH);
SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
SimResult.add(jComboBox2,0);
// Test
this.setTitle("Test");
this.setLocation(new Point(0, 0));
this.setSize(new Dimension(600, 500));
this.setVisible(true);
public void initializeComponent()
/** Add Component Without a Layout Manager (Absolute Positioning) */
private void addComponent(Container container,Component c,int x,int y,int width,int height)
c.setBounds(x,y,width,height);
container.add(c);
// TODO: Add any appropriate code in the following Event Handling Methods
private void jTabbedPane1_stateChanged(ChangeEvent e)
System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
// TODO: Add any handling code here
// TODO: Add any method code to meet your needs in the following area
// TODO: Add any appropriate code in the following Event Handling Methods
private void jComboBox1_actionPerformed(ActionEvent e)
System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
Object o = jComboBox1.getSelectedItem();
System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
// TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
super();
//initializeComponent();
contentPane = (JPanel)this.getContentPane();
jTabbedPane1 = new JTabbedPane();
Main = new JPanel();
ScriptGenTab = new JPanel();
ResultTab = new JPanel();
// OutputSimSet = new JPanel();
// Test = new JPanel();
// SimResult = new JPanel();
jComboBox1 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
jComboBox2 = new JComboBox(
new String[]{"Item 1","Item 2", "Item 3"});
jComboBox2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
System.out.println("Yeah");
// Main
//Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
Main.add(jComboBox1);
//ResultTab -----
ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
ResultTab.add(jComboBox2);
// jTabbedPane1
jTabbedPane1.addTab("Main", Main);
jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
jTabbedPane1.addTab("Simulation Result", ResultTab);
jTabbedPane1.addChangeListener(new ChangeListener() {
public void stateChanged(ChangeEvent e)
jTabbedPane1_stateChanged(e);
// contentPane
contentPane.setLayout(new BorderLayout(0, 0));
contentPane.add(jTabbedPane1, BorderLayout.CENTER);
// Test
this.setTitle("Test");
this.setLocation(new Point(0, 0));
this.setSize(new Dimension(600, 500));
this.setVisible(true);
public void initializeComponent()
// /** Add Component Without a Layout Manager (Absolute Positioning) */
// private void addComponent(Container container,Component c,int x,int y,int width,int height)
// c.setBounds(x,y,width,height);
// container.add(c);
// TODO: Add any appropriate code in the following Event Handling Methods
private void jTabbedPane1_stateChanged(ChangeEvent e)
System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
// TODO: Add any handling code here
// TODO: Add any method code to meet your needs in the following area
// TODO: Add any appropriate code in the following Event Handling Methods
// private void jComboBox1_actionPerformed(ActionEvent e)
// System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
// Object o = jComboBox1.getSelectedItem();
// System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
// // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc... -
[svn:cairngorm3:] 21174: Landmark does not work under complex situations
Revision: 21174
Revision: 21174
Author: [email protected]
Date: 2011-04-29 11:21:00 -0700 (Fri, 29 Apr 2011)
Log Message:
Landmark does not work under complex situations
https://bugs.adobe.com/jira/browse/CGM-39
Ticket Links:
http://bugs.adobe.com/jira/browse/CGM-39
Modified Paths:
cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/core/EnterAndExi tInvoker.as
cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/waypoint/Waypoin tHandler.asHi John,
1) I like that the new model adds parameterization. It's cleaner than pulling in parameters from pre-set variables. However, the given example didn't actually make much use of it. The only non-constant parameter multiply-used in the example is the "table" variable. Seems like a lot of work for not a lot of gain, at least in this case?
2) I am cautious that this new template/model condenses the paradigm sooo much, that it is no longer clear where XPath is involved vs straight constant tag names. Yes, Adobe's example is overly-expanded but that's common in code meant to be a demonstration.
3) I also am cautious that the example intermingles direct node creation into the XPath search/processing chain. I've learned to be VERY careful with this. It only can work when the changes made do not interfere with the rule processing. In my model, I simply avoid it completely (by not making node-position or node-add/remove/move changes until after tree parsing is complete.) This will always be a safe model.
Bottom line: while I very much appreciate the parameterization and lintability (is that a word? Sure makes sense to me )... I think I would still define each rule separately rather than bring them all together as an inline array in the rule processing call. To me it seems sooo condensed that the XPath meaning can become lost. (Would someone recognize that //para/section-head is actually an XPath statement that could (in another situation) be //para/* or //para/following-siblings::* ... while some of the other strings are exact-match tag names?)
I realize this is all a matter of style... my preference: clarity for the future reader, particularly when the future reader is me a year later who forgot what all those parameters and embedded methods were all about ...
Blessings,
Pete -
SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials
Hi all
I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
and everything works except the "Connect via Console" function.
When I try to connect to a VM I get the following message:
Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
provided do not have the necessary privilege to connect (0x0003, 0x0300)
It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
Thx
J0feBeing new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
I elected to use Credential Manager to resolve this issue.
In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
Cheers,
Lain
Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks! -
WRT54G2 connects IM clients but browser does not work.
Hi,
I purchased this router last week and it had been working perfectly. All of a sudden today y lost my VPN connection and all that was connected was the msn and skype, nothing else works. None of the computers work either wired or wireless.
When i connect the PC directly to the cable modem works perfectly. When i connect the router back, does not work.... Any ideas??Does the connection from router work without VPN...?
Does Modem work with VPN or without VPN...?
Make the connection (M-R-Comp) again and power cycle the complete network and check. -
SQL-Server detection/discovery does not work in win 10 build 10041
Hello,
I'm using the default .NET-function to detect SQL-server-instances in the network. It works fine in win xp, win7, win8 up to win 2012r2. It also works in earlier win 10 builds, but it's broken in build 10041.
It's reproduceable with the powershell-call
[System.Data.Sql.SqlDataSourceEnumerator]::Instance.GetDataSources()
On other systems the function call takes about 10 to 15 seconds before returning a list of SQL instances in the network. Under win 10 build 10041 it returns immedeately without any results.
Please fix this problem before the final build!Share: The abiltity to place a link to the feedback-"post" somewhere else ... facebook, twitter, or this forum here.
I've only a virtual machine with windows 10 installed. So it's really annoying, that I have to log on on to check the state or the "me too" count of my feedback-post. Would be great if this post is reachable through the web from other (pre windows
10) machines.
Answer: The ability to reply to the feedback-"post". like "it's solved now", "it does not work with build xxxxx", "i can't reproduce", "we're working on a bugfix" -
TableView : sort = "SERVER" ...does not work for "TIME"
Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
BindiyaWelcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja -
Having start up problems, keyboard light and loudness adjustment via keyboard does not work
Often if I start my MacBookPro 13" with Lion it starts up and is than blocked. I can not open the finder nor starting any programm. The turning wheel never stops and I have to restart the book by pressing the on/off button for a long time. Sometimes I need to do that several times till it runs stable.
During this week I experienced in addition that the keyboard light is not working anymore and also the loudspeaker adjustment does not work via keybaord. Only via menu bar.
Any idea what's going on with my book?Read these two links from the Apple support files:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379
Good luck.
Ciao. -
EPSON BX320FW does not work under OSX 10.9 via WIFI
Hi
after my upgrade to 10.9 the printer started to does not work.
I could see the printer, but the status is waiting.
When I try to print, I see the message "Finding a printer", and it failed.
Any idea?I have a BX535WD and the same problem. Can't even add the printer with 10.9 in normal condition.
Removing printer once you manage to install it works, but after that it can not be re-installed unless you switch off/on the printer. Then you can re-install it and print and scan until you log off from your Mac system.
After that it cannot be found or used until you repeat this procedure.
This is very anoying ... -
Capturing video via Firewire does not work on CS6
I recently installed 64 bits Windows 7.
The capture function in Premiere CS6 does not work with my panasonic camcorder NV-GS500
Windows recognizes the camcorder, but I cannot do anything with it in the Capture window.
This not an Premiere-specific problem , because also wit Nero I have the same problem.
I expect that the Windows7 driver for my camera needs to be upodated, but Panasonic cannot help me.
Is there anybody out in the Premiere community who knows a solution?Windows 7 Changed the standard 1394 driver from XP which allows Win 7 to Throttle bandwidth on Firewire devices. This is why Ann mentioned the legacy driver which is basically the old XP driver. The bandwidth throttling causes allot of issues with certain cameras during the Handshake process which is why you often have deck control but no preview or primary video stream. If you follow the instructions in the link above or the paste below to set the Legacy driver for the 1394 controller , that will often resolve these issues. However some firmware on different manufacturers Firewire controllers include these C-State Bandwidth throttling sets so it still may not work. In that case you want to get a Firewire card with a TI chipset. The firmware on TI chips are clean and dont include the C-State changes.
Solution 6: Use the Legacy FireWire driver (Windows 7 x64)
Click the Windows Start button; type "device manager" into the Search box and select Device Manager
Swivel open the "IEEE 1394 Bus host controllers" item
Right-click on your listed 1394 controller; select "Update Driver Software"
Click the "Browse my computer for driver software" button, followed by the "Let me pick from a list" button
Select the option that has "(Legacy)" at the end of the name; click Next and let Windows install the driver
Make sure you restart the system after you make the change to legacy. Also do not have the Firewire device plugged in when changing the driver to Legacy.
Close out of dialogs and retry capture'
Eric
ADK -
Lync 2013 - Silent install via .msp does not work
The thread listed below is marked as "answered" and indeed the answer given is correct and should work. . . but recently it seems to have stopped working for many.
(EDIT: Site will not allow me to post the link I was planning to post, "until it verifies my account." So, I can only refer you to the thread named "Lync 2013 Client - Silent Installation")
Specifically, it should be possible to do a silent install of Lync 2013 by following the instructions given in the link above to use setup.exe /admin and create an .msp to put in the "updates" folder for the silent install.
The problem is, recently (September 2014-ish) this appears to have stopped working. The thread quoted above has several people replying, all during September 2014, that this method does not work. I am among them. Lync 2013 runs through
the setup, but only Office Tools ever appears as installed in the Start menu. However, if you go to Control Panel, Uninstall Programs, and look for Lync 2013, it is listed there. You can then tell it to "repair" the Lync installation,
and it reinstalls properly. This, of course, defeats the whole purpose of trying to do a silent install, however.
Since it appears that the .msp silent install method used to work, but now does not -- what changed? And what kind of workaround can be used?Hi,
Did the Lync Package to be the latest version from Microsoft Website?
As the issue have been met by several users, you can feedback the issue on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support
Maybe you are looking for
-
Passing 2 or more Items values in an APEX URL
Hi all- I found many threads with a similar title but no one was exactly what I am looking to do. so here is the deal : I have two items on page 3 called P2_X , P2_Y . In page 2 I want to click on a button that will go to page 3 and set the values of
-
File Adapter sync reading error
I am getting the following error trying to read a pdf file using file adapter <assign name="Assign2"> <copy> <from variable="receiveInput_process_InputVariable" part="filename"/> <to variable="file"/> </copy> <copy> <from variable="receiveInput_proce
-
do not have details. can you help or not!
-
How can I use a ButtonBar for a TabNavigator?
Don't ask me why they want <Previous><Next> navigation for a Tabbed view, but it is what it is. I need a <Previous><Next> ButtonBar on each of the inner tabs (and obviously a <Next> and <Previous> ButtonBar for the first and last tabs respectively) t
-
Warning: ocilogon() [function.ocilogon]: OCIEnvNlsCreate() failed.
Right now I am getting the following error when I try to connect to any of my Oracle databases: Warning: ocilogon() [function.ocilogon]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that ORACLE_HOME is set and po