Connect to the computer a sound system 7,1 with one jack ??

hello everybody, i want to buy?the speakers system T7900, but i have only one jack slot on my computer. i have read that i can connect a system 7,1 with this slot, but i don't understand how is possible? to connect a 7,1 with jack slot. For information, i have a fujitsu siemens m3438g 75005 thank you to answer me

I think there's no problem in connecting a 7.1 system with one jack (if so always with the green one)But you have a cheap solution that allows you to have sound on all speakers:Buy two of these http://img.mercadolivre.com.br/jm/im...65_670.jpg&v=P
And in one of them insert the yellow and black jack and this adaptor will insert in one of the holes of the other adaptor along with the green jack having something like this.yellow/black | | adaptor/green | | adaptor | sound card
But, although it woks you won't have the same surround sound that you could have if you connected the speakers with the 3 jacks to a sound card (without adaptors). Hope you understand, and sorry for the bad english, I'm portuguese
Message Edited by grimreaper9 on 08-07-2007 03:03 AM

Similar Messages

My phone wont start up at all, even when it is connected to the computer or dock. what's wrong with it?

Please help.

Even if it's plugged into the wall charger, it can take 15-20 minutes of charging before the iphone may turn on. So if ti dosen't turn on after the reset brad suggested, then I would suggest leaving it plugged in for 20 minutes and trying the reset again.

My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling

Touchscreen not working: error message code 45, says "device is not connected to the computer"

My subject message basically says it all. My touchschreen is not working at all. I went into device manager and found error message code 45, which states that the "device is not connected to the computer."
I have tried updating drivers, uninstalling and reinstalling the device, and other things, but nothing working.
All advice appreciated.

Hi @Jim9 ,
Welcome to the HP Forums!
I saw your post regarding the error code 45. From what you have described this sounds like it is a hardware issue. The only real troubleshooting I can recommend (that you haven't already done), is going a full System Recovery to restore it back to factory defaults. If the issue still occurs then we know it is a hardware problem.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

My wireless scanner wont work, no connection to the computer OFFICEJET 7500 E910

my wireless scanner wont work, no connection to the computer>OFFICEJET 7500 E910

My issue keeps happening about once every month and what I've been doing is to re boot the system, both printer and computer and this seems to work for me.
Sorry I cant offer you more than this.
Regards
Al

Why is my itunes trying to update my iphone and its not connected to the computer?

This would be more for the technical side of the house, but why would the system try to update my iPhone and its not connected to the computer? is there a bug in the system?

Update or sync?
As of iOS 5 updates and sync can be done wirelessly, over Wi-Fi.

Ipad is connected to the computer however doesn't show up in the menu, I'm trying to restore it but am concerned that it will restore the iphone and not the ipad. any suggestions?

ipad is connected to the computer however doesn't show up in the menu, I'm trying to restore it but am concerned that it will restore the iphone and not the ipad. any suggestions?

Hi vanover7,
It sounds as if when you connect your iPad to your computer it does not show up in iTunes, is that correct?
Please use the steps in this article to troubleshoot the issue -
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

My iPod is dead and won't charge or connect to the computer. How can I fix this?

My iPod is dead and won't charge or connect to the computer. How can I fix this? Before it died, it said I had a full battery whenever I charged it, but as soon as it came off of the charger, the battery level was always under ten per cent.

Sounds like the battery needs to be replaced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

My iPod is connected to my computer. The iPod registers that it is connected to the computer, but iTunes and my computer do not register that my iPod is connected. I have tried to update and re-install but nothing is working. Can anyone help me out please

So I am trying to connect my ipod to my itunes So I can transfer music from CDS I have on to my ipod...The ipod says it's connected to the computer,But itunes and my conputer do not register my ipod is connected...I have trierd to update and reintalinng it and still not working...Anyone wanna help me please

tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Why can't I use the Column Browser for my iPod when connected to the computer?

In iTunes 11, I can use the Column Browser while viewing my music library on the computer. But it's inexplicably not available for viewing the music on my iPod when it's connected to the computer to sync.
The Column Browser is the simplest, easiest, most elegant way for me to review what's on my iPod, and create Playlists from my music and CD books. It was available in 10.7 and is available on the computer, why not the iPod????!!!???
Why mess around changing something that isn't broken - after all these years why can't that option still be available? It doesn't have to be the default, just be available. Will I have to downgrade to 10.7 yet again????
And you don't even have a relevant category for me to choose from below!! It makes sense to me that you provide a general "Using iTunes" category.

Thanks for your reply, but I've already done that and the Column Browser options are completely grayed out. I've taken a screen shot and hope I can paste it in here. You'll see I have the sidebar open. That's the way I prefer to deal with iTunes.
This happened after I updated to iTunes 11.0.4. Perhaps that changed the setting options. I think I had the Column Browser option prior to that, but I just got a new iPod and I was busy loading stuff, so not completely sure if it worked before the update. But I think I would have noticed, because it bugs me so much not to have the option.

My ipod touch is connected to the computer but itunes is not recognizing it. help please !

My ipod touch is connected to the computer but itunes is not recognizing it. I need help please. I've tried restarting both my ipod & the computer and also unistalling itunes and loading it again, nothing is working.

Assuming you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

My ipod is not charging or connecting to the computer. .

my ipod is not charging or conecting to the computer. i reset the ipod and network settings and it still wont charge no matter what. it wont even connect to the computer. HELP

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also
See
iOS: Device not recognized in iTunes for Windows

My iphone 4s will not connect to the computer or charge when on

Ok, so this one is kind of strange. I've had this problem for about a 10 days, and it's driving me nuts. The gist of it is that when I connect the USB cable to the phone and to either the computer or the electricity plug, nothing will happen. The phone will not charge in either, and when connected to the computer, neither iphoto nor itunes will connect to the phone (so no syncing podcasts or photos, grrr).
For a while I thought that it was a hardware problem- it started first by not recognizing the electricity plug, and i could only charge it with the computer (i think since i upgraded it to iOS6 first, about a month and a half ago). At that time, itunes and iphoto were working, so i didn't mind. Then, it started to get picky and i had to plug it a dozen times before it would work. I was very afraid that I wouldn't be able to charge my phone at all- but I discovered that if the phone was turned off while plugged, then it would charge perfectly. If I plugged it in while it was turned off, it would start up and not charge nor connect to itunes / iphoto- so the phone is getting the charge and it knows when it's being connected, but only as long as it's in a coma .
Here are the specs of what I'm using:
iphone 4s
iOS 6, latest version as of today
Macbook 4.1 Intel Core 2 Duo 2,4 GHz
running OSX 10.6.8
and iTunes 10.7 (21)
And here's a bunch of things I've tried:
- different cables
- different computers (macbook pro running 10.8.1)
- push start + off buttons simultaneoulsy for 30 seconds
- connect via wifi (since I need to start with the cable, it doesn't work)
Obviously nothing worked, and I would hate losing the pictures and videos in my phone that haven't been synced. Any ideas?

You must use Apples iTunes in order to place ringtones or music of your own on the phone. You don't have an android phone which uses a sd card and can load via the usb cable.
If you need info on how to get songs and ringtones and photos on your phone read the manual on your phone or read up at http://www.apple.com

Connect to the computer a sound system 7,1 with one jack ??

Similar Messages

Maybe you are looking for