Connect to TT6.0.3 from a 5.1.24 client

I get this when I connect to a 64bit TT6.0.3 from a 5.1.24 client
S1000: Protocol mismatch; client protocol: 27, server protocol: 28
The command failed.
All the setup in sys.odb.ini looks correct and I am using the correct driver under that section
[My_Dsn]
TTC_Server=MyServer
TTC_Server_DSN=DSN_on_Server
DRIVER=/opt/TimesTen/TT32_603Client/lib/libttclient.so
TTC_Timeout=500
I have a need to connect to both 5.1.x and 6.0.x servers from the same client is this supported?
Thanks

You will need a 5.1.24 on the server to make this work.
If you are a licensed TimesTen customer, please file a MetaLink ticket and one of the TimesTen support engineers will assist you.
-scheung

Similar Messages

I cannot connect to Windows 7 professional from the IOS Remote Desktop client

The error message is <o:p></o:p>
"Reading 17162 bytes of data at offset 3 in a buffer of total size 106"
However I make connection with the I Pad connected
to the same network as the PC (but on a different network segment) the, connection is successful. I only get the above error when I try and make a connection to my PC with a public IP address.
<o:p>I have the log files from the IOS client.</o:p>
<o:p></o:p>
<o:p></o:p>

Hi,
Please provide us the un-edited log file after issue occurs from the client side for research.
Thanks.
Jeremy Wu
TechNet Community Support

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

How do I use camera connection kit to transfer photos from iphone 4 with ios 7 to ipad 2 with ios t?

How do I use the camera connection kit to transfer photos from iPhone 4 with ios 7.0.2 to iPad 2 with ios 7.0.2?

<http://support.apple.com/kb/HT4101>
"In addition to supporting digital cameras and SD cards, you can import photos and videos from your iPhone, iPod touch, iPad, and iPod nano (5th generation) using the Camera Connector."

Remote Desktop Connection to Windows 8 PC from other computers crashing

Hi all.
Was hoping someone would be able to help me with an issue I'm having.
I'm trying to get a LAN remote desktop connection established to my Windows 8 laptop. It's an HP ENVY 17t-2100 CTO 3D Edition Notebook PC. Note that I'm running Windows 8 Pro only - not 8.1 as HP haven't released 8.1 graphics drivers for this laptop and probably
never will. The computer has a single user profile that has full administrator rights.
I have followed numerous web tutorials on how to turn on Remote Desktop. I've gone into Advanced System Settings > System Properties > Remote > checked "Allow Remote connections to this computer". All seems ok to me.
The problem comes when I try to establish a connection. When the connection is made, it almost instantaneously crashes the session on the computer or device trying to connect. The RDP client on my Windows 7 laptop, Mac OSX or Mac running Windows 8.1 Pro just
crashes, while the RDP iPhone or iPad app simply flickers for a few seconds then goes back to the main screen. Meanwhile, the HP ENVY loads the lock screen and displays a message saying XXX device is connected remotely and it won't let me log back in to kill
the connection or do anything. I have to restart the computer from then to be able to use it again.
I'm convinced there's not a problem with my local network as the HP ENVY can RDP into the Windows 7 laptop or Mac running Windows 8.1 without any problems. All computers are connected via Ethernet to a Linksys/Cisco wireless ADSL modem router which supports
Gigabit. The iPhone and iPad of course connect to the wifi network from the Cisco/Linksys modem router
I've also had a brief look at the RDP local connection logs. From what I can make out, they confirm that a user has successfully logged in, but they don't provide a crash log or a log of the user ever disconnecting, probably because I have to restart the computer
to continue using it. Dead end there, it seems.
The HP ENVY is connected to 3 external HP LED monitors. I've disconnected them and tried all devices with no luck. I've also played round with the RDP client settings to not mount drives or printers and the HP ENVY has no printers connected anyway, though I've
done all I can to remove any printer drivers as I've read elsewhere that they are what could cause the problem, but I've had no luck.
If anyone can suggest anything more that I can try, I would be unbelievably grateful! I'm more than happy to provide screenshots or videos of what happens when I try connecting. I'm not sure what you experts would find immediately helpful so just ask away if
you think I can provide anything.
Thanks in advance!
rugbyreff

The first thing that I would try is to uncheck all of the boxes for local resources on computer running the RDP client. It is possible that a device, such as a printer or other redirected device, is causing the crash. You can also look under Event Viewer
in the event logs of both systems and see if anything unusual appears when you attempt the remote connection.
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet
Hi Brandon
Many thanks for your suggestions. There's nothing in the logs that I could find, like I said in the original post. I've also tried connecting with bare minimum settings on all devices (FYI the iPad and iPhone version don't support the use of printers) and
this still hasn't helped.
If you have any other ideas I'd be very glad to hear them!
rrugbyreff
"If it's worth doing, it's worth overdoing" -- MythBusters

What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)

I feel like I should know the answer to this. I can't believe it is a hard question.
What is the direct connect method for transfering photos from my macbook pro to my iphone without using iTunes syncronization? (iow: a simple photo copy from mac to iphone?)
Easy? Right?
Just plug my iphone in to a mac and copy a photo from the mac to my iphone.
I don't have internet access - I can't email it, or mobileme it, or dropbox it.

iTunes. Other than that there is no direct method. However, do try the iPhone forums.

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
So only one imac, only one ipad..and so on simultain.
More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
I need to disconnect one device to have internet on the second one from the same type!
Could somebody help me?
Many Thnaks,
dan

If your network configuration is:
Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Modem/Router Power ReCycling
- Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
Perform a "hard" reset of the AEBS.
- (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

Error -While create a connection to Microsoft SQL Sever from Oracle SQL Dev

Dear All,
While I am trying to create a connection to Microsoft SQL Sever from Oracle SQL Developer. The following error: "Cannot connect to Microsoft SQL Server on localhost" has been occurred.
Can anyone please guide me to solve this..
Thanks in advance,
Rider

Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

I cannot connect to the itunes store from my PC

For some reason, starting about 2 months ago, I can no longer connect to the iTunes store from my PC. Does anyone have any idea why this would occur?
Obviously all my internet connections are fine and it is not a firewall or filter issue.

Could you walk us through what happens (when you try to connect to the Store) in some more detail, please?

I have tried everything to connect to the itune store from in itune, I have tried everything from apple support team, no help. I am able to get everything up on my iphone just not from my PC, Anyone else having this problem

last month I begin having problem connecting to the itune store.from my PC, Have had apple support help but that did no good. Itune will not connect. Tried everything from the troubleshooter page but it did not help. It have been 4 month now. Anyone else have any ideals?

many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Why can't I connect to Apple TV(2) from my MacBookPro when I can easily do it from my iPad?

Why can't I connect to Apple TV(2) from my MacBookPro, when I can easily do it from my iPad? I want to be able to watch a movie from my MacBookPro desktop on my TV using Apple TV.

Hello, anita l.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Cheers,
Jason H.

How do I connect to a DB2 database from Oracle 10G on linux?

Hi
I have tryed to connect to a DB2 database from oracle 10 G on linux.
I have installed unixODBC and a db2 odbc driver. I can connect to the db2 using isql, but oracle comes with this error:
select * from testtable@acc_spc_gr2
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'
ORA-02063: preceding 3 lines from ACC_SPC_GR2
What am I doing wrong? Any one have a guide to do this?
- Jesper

this is my complete configuration
Database_
-bash-3.2$ export ORACLE_SID=XE
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mié Jul 7 10:04:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Platform_
Linux srvpdf 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux
*/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/initDB2DATABASE.init*
#This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
#HS_FDS_CONNECT_INFO = ODBC_DSN
HS_FDS_CONNECT_INFO = prueba
HS_FDS_TRACE_FILE_NAME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/DB2DATABASE.log
HS_FDS_CONNECT_INFO = DB2DATABASE
#HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
# ODBC specific environment variables
set ODBCINI=/etc/odbc.ini
# Environment variables required for the non-Oracle system
set DB2INSTANCE=is400
listener.ora_
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = DB2DATABASE)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM =hsodbc)
(ENVS = LD_LIBRARY_PATH = /opt/ibm/iSeriesAccess/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.32)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.31)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora_
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvpdf)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
DB2DATABASE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost )(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = DB2DATABASE)
(HS=OK)
odbc.ini_
[prueba]
Description = iSeries Access ODBC Driver
Driver = iSeries Access ODBC Driver
System = xxx.xx.3.2
UserID = xxxxxx
Password = xxxxxx
Naming = 0
DefaultLibraries = QGPL
Database = CHERRYWEB
ConnectionType = 0
CommitMode = 2
ExtendedDynamic = 0
DefaultPkgLibrary = QGPL
DefaultPackage = A/DEFAULT(IBM),2,0,1,0,512
AllowDataCompression = 0
MaxFieldLength = 32
BlockFetch = 1
BlockSizeKB = 128
ExtendedColInfo = 0
LibraryView = 0
AllowUnsupportedChar = 0
ForceTranslation = 0
Trace = 0
odbcinst.ini_
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[iSeries Access ODBC Driver]
Description = iSeries Access for Linux ODBC Driver
Driver = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
Driver64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbc.so
Setup = /opt/ibm/iSeriesAccess/lib/libcwbodbcs.so
Setup64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbcs.so
UsageCount = 1
CPTimeout =
CPReuse =
System = 172.18.3.2
User = inf5mito
Password = lonco3pue
NOTE1 = If using unixODBC 2.2.11 or later and you want the 32 and 64-bit ODBC drivers to share DSN's,
NOTE2 = the following Driver64/Setup64 keywords will provide that support.
Threading = 2
DontDLClose = 1
ODBC Driver_
-bash-3.2$ cd /opt/ibm/iSeriesAccess/lib
-bash-3.2$ ls -ltr
total 2260
-r-xr-xr-x 1 root root 443939 Apr 5 2008 libcwbxda.so
-r-xr-xr-x 1 root root 94504 Apr 5 2008 libcwbrc.so
-r-xr-xr-x 1 root root 16636 Apr 5 2008 libcwbodbcs.so
-r-xr-xr-x 1 root root 729572 Apr 5 2008 libcwbodbc.so
-r-xr-xr-x 1 root root 998060 Apr 5 2008 libcwbcore.so
and this is my error.
SQL> /
select from display@db2database*
ERROR en línea 1:
ORA-28500: la conexión de ORACLE a un sistema no Oracle ha devuelto este
mensaje:
*[Generic Connectivity Using ODBC][C077] Could not find symbol 'SQLAllocConnect'*
in dynamic library
*[C079] Failed to load dynamic library*
*'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'*
ORA-02063: 3 lines precediendo a DB2DATABASE
Edited by: user6669081 on 07-jul-2010 6:31

How do you access files from an external harddrive connected to TC through USB from iPad or windows computer?

How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?

Filebrowser for the iPad does this very well.
FileBrowser - Access files on remote computers for iPhone, iPod ...
Cannot help on Windows, but another PC guy might be able to answer. Some possible clues here:
http://support.apple.com/kb/HT1331

Connect to TT6.0.3 from a 5.1.24 client

Similar Messages

Maybe you are looking for