Connect to TV as external display

I have been using VGA cable to a samsung digital. I used to set up using Fn F7 and then FnSpacebar to switch between screens. Now FnF7 changes my resolution and external display screen reads "Mode Not Supported" Any ideas?

Needed 1024X68 res but do not remember ever having to do that.

Similar Messages

Connecting MacBook Pro to external display

Hi,
I have an external display which has dvi & displayport outputs. I currently connect it to my desktop using the displayport however my MacBook Pro (late 13) only has the thunderbolt / mini displayport & HDMI. Bearing in mind that my monitor is 2560 x 1440, what would be the best way to connect my MacBook to it?
Thanks in advance,
-James

It sounds like you're already using the best way. The Thunderbolt port is also a Mini DisplayPort, so you're connecting it DisplayPort to DisplayPort. The reason that is the best way is most other cables, including HDMI in my experience, will not reach the 2560x1440 resolution. (HDMI will probably drive that monitor at 1080p, or only 1920x1080.)
If DVI were to be used, it would have to be the expensive Dual-Link DVI because regular old Single Link DVI isn't capable of 2560x1440. It's a good thing the MacBook has Mini DisplayPort on it instead of DVI (like the older Apple laptops did) because DisplayPort cables are far cheaper than Dual-Link DVI adapters.
You can't do better than the connection you're already using.

How do I connect MacBook Air to external display?

What methods are available to connect a MacBook Air to an external display?

The MiniDisplayPort/Thunderbolt Port on your Air would be used as the the physical connection. It's just a matter of buying the corresponding adapter to the type of connection you want to use, being either HDMI, DVI or VGA.
Here's an example of the VGA adapter Apple sells.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
The DVI:
http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
HDMI:
http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support

Connecting mac book to external display

Hi all i want to try to connect my macbook to an external display. now i think it is possible if i get a connector however i went to the apple store and there seemed to be two different cables available and im not sure which one i need...
i have tried to find a picture on the internet of the particular connection but i cant find one. where the cable leaves the monitor it is connected to a port labelled VGA... but from reading a few other comments it seems like you need to know whether it is male or female and i have no idea!
thanks

what's the connection on the display? usually, the VGA port is blue, the DVI is white.
VGA connector: http://store.apple.com/us/product/M9320G/A
DVI connector: http://store.apple.com/us/product/M9321G/B

Imac 21.5" mid 2011 performance when connecting a 27" 2560x1440 external display

Im about to pull the trigger and buy the 27" apple cinema display. But I have concerns about the performance I will experience when connecting it to my base model imac 21.5". Can my 21.5" imac (2.5 GHz Intel Core i5 / AMD 6750M 512 MB / 12GB of RAM) run a 2560x1440 external display smoothly? Or is that too much for my graphics card? Any help is greatly appreciated. I have searched everywhere for clarification but still nothing. Thanks!

Hello,
Looks good to go...
2nd Display Support:
Dual/Mirroring
2nd Max. Resolution:
2560x1600
Details:
Apple reports that this model simultaneously supports the native resolution of the built-in display and up-to a 30-inch external display (2560x1600).
http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.5-21-inch-alumin um-mid-2011-thunderbolt-specs.html

Connect X250 to 3 external displays?

Hi, Is it possible to have the X250 drive 3 external displays using the dock? Can I just connect all three of the external monitors directly to the dock or do I have to daisy chain the monitors using display port?I do not intend to use the laptop lcd while the machine is docked. Thanks

Hello, I wonder if HDMI isn't the problem?
It's supposed to...
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.9-27-inch-alumin um-late-2012-specs.html
Do the monitors have anything besides HDMI?

Can I connect two non-TB external displays to a new MBP?

Looking to pick up a new MBP and I would like to connect two non-Thunderbolt monitors, they are nice but WAY too expensive, and I'm wondering if this is possible. I know I can use Matrox Head2Go line of products, but I would like to avoid shelling out another 2-300 on other hardware if I can avoid it.
So any other ways to drive two monitors? I'm surprised there is no Thunderbolt -> DVI adapter or something. Heck maybe there is, but I haven't seen it yet.
Thanks

here is the adapter your were looking for http://store.apple.com/us/product/MB570Z/A
you'll also need to consider getting something that supports usb to dvi which will make your third monitor connnected via a usb port. This uses DisplayLink Drivers which let you connect a monitor via usb. Warning, it does not have full support for Lion yet.
I'm using the arkview usb display adapter. there are other on the market, they all use DisplayLink. And since I'm on Lion I'm waiting for DisplayLink to fix their drivers to work on it (it's been a struggle).
If you're on Snow Leopard it will do you well to stay on it. .
you could get on Thunderbolt display and then connect a monitor to that with the dongle I showed you. Then you will have no issues with Lion and your three displays.
Thunderbolt tech is new and new adapters will be coming out for it, especially something that handles mutliple screens. but you'll have to wait for this technology to be made.

Connecting MacBook to an External Display

I have a mini dvi adaptor and DVI cable to connect my macbook to my LCD TV.
What I want to do is watch movies (either in iDVD or not), downloaded video and anything else that is possible (extended desktop etc)
So far, after connecting all the cables, all I can see on my LCD TV is my desktop picture from my MacBook.
What else do I need to do?
Cheers

Apart from what Howard Chernin already explained, there are a couple other things you could do:
- Hit the F7 key on the MB's keyboard. This will toggle from extended desktop mode to mirror mode. In that case you will see the same thing on the TV as on the MB's screen. Or you can...
- Close the lid on the MB so it goes to sleep. Plug in the MB's power adapter if it isn't already. Plug in a USB mouse to the MB. This should cause it to wake up and the TV will now be the only active screen. Once the TV comes on as the main screen, you can open the MB's lid if you like and the MB screen will remain off.

Connect iPad Air to external display

Can I connect an iPad Air to an LCD projector? Can I connect it with an HDMI cable?

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

MacBook Pro's Color LCD "shifts" when connected to external display?

I have a 2010 MacBook Pro with the hi-res anti-glare screen. I just noticed that the internal color LCD "shifts" its colors when I connect it to an external display (a Dell 2408 WFP). If I disconnect the external display, the colors internal color LCD go back to "normal".
I have two images to show what I mean:
This is what it looks like with the external display disconnected i.e. the MacBook Pro on its own: <http://www.flickr.com/photos/vazexqi/4558641163/sizes/l/>
This is what it looks like with the external display connected: <http://www.flickr.com/photos/vazexqi/4559271260/sizes/l/>
The wallpaper is from pixelgirlpresents.com. I didn't notice this problem before with my older 2006 Core Duo MacBook Pro (OS X 10.5.7).
My guess is that with the external display connected, somehow the color LCD decides to use the external display's profile as well (instead of its own).
Any ideas on why this is happening? And, more importantly, any ideas on how to fix this?
Thanks.
Nick
Message was edited by: Nicholas Chen

@Stefan: Thanks for the tip. I tried it but unfortunately it didn't solve the issue. The color is still off.
Incidentally, just out of curiosity, I tried these two things:
1) I tried the "Mirror Displays" option in the Displays Preference Pane. With this option enabled, both displays actually displayed the right colors (right with respect to how each display is calibrated).
2) I opened the same desktop wallpaper in Preview. Whenever I drag the Preview window so that it spans/crosses both displays (external and Color LCD), there is a light flicker in the wallpaper in the Preview Window. For that brief moment, I can see that the color is right before it changes to the shifted color on the Color LCD.
I found a possibly related thread on a different forum <http://arstechnica.com/civis/viewtopic.php?f=19&t=37841>. That doesn't seem to help when both displays are connected.
Now, I am just wondering if this is considered normal - wonky color shifts between the desktop/different windows happen when you have two displays connected....
Nick
PS: Note that I am not a graphics designer so my definition of right/wrong is just based on my experience looking at the wallpaper and remembering what it should look like on each display by itself.

My external display does not work

i've got a macbook pro and a Medion extra display.
i bought a adapter and all, It worked. but now after I unplugged it for teh 5th time or so, the mac stopped reacting on the display and conversely.
can somebody help? thanks

Hello Kaloka Kaloka,
Thanks for using Apple Support Communities.
From what I understand you're unable to connect to a specific external display, but your TV does function as an external display. Please follow the relevant instructions in the following article to troubleshoot this issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Take care,
Alex H.

External display flashes and shows 'snow'. (Video of behaviour included)

Since yesterday, my Macbook Pro is acting strange. When I connect it to an external monitor, it usually works. Everything goes well for 10 to 30 minutes, and at some point the display starts tearing, showing snow, and flashing. These flashes get worse and worse, up till the point where I have to reboot. Rebooting seems to help a little. Whenever the laptop hasn't been used for a few minutes it works correctly again, for a short while. (This makes me conclude it's some sort of heat-related issue)
The issue is present on multiple monitors using different DVI cables. I only have one mini-displayport to dvi adapter, so the problem could be there too.
This problem does not affect the internal display of the macbook in any way.
Here is a short video showing the behaviour:
http://www.youtube.com/watch?v=4BotUqHb3dM
What should I do? Try to figure out wether it's the mbp or the connector or just bring it in for a repair. (It's less than a year old)

I have had similar issues with my 15" MBP. Occasionally my external monitor will go 1980s and display what looks like crappy tv reception.
Also, connecting or disconnecting an external display (via the single link mini display port to dvi adapter) has a tendency to lock up the entire machine (both displays black, won't respond to keyboard or mouse) until the power is cycled.
Also, my built in monitor has a habit of flickering/glitching lines.
These problems seem to happen regardless of which graphics card is active.

External display blinking on Macbook Pro Late 2008.

Hello,
Firstly, computer specs:
Macbook Pro, 15-inch, Late 2008
GPU: GeForce 9400M / 9600M GT
8 GB RAM
320 GB Hard Drive
On Mavericks v10.9.3
I want to connect my computer to my TV via a mini displayport to HDMI adapter, for gaming purposes. As such, I want to use the 9600M GT as my GPU. However, when I am in High Performance mode (which uses that GPU), the TV screen blinks on and off every couple of seconds. I have tried resetting my PRAM, which failed. I know it is not the adapter, because it functions when used on another laptop. I know it isn't my port because it works when in Battery Saving (using 9400M GPU). Can anyone help?
In short:
Late 2008 15-inch Macbook Pro, GeForce 9400M / 9600M GT
Mini displayport to HDMI functions when on Battery Saving (GPU = GeForce 9400M)
However, external display blinks on and off when on High Performance (GPU = GeForce 9600M GT)

Hi mjbecker2,
Welcome to Apple Support Communities!
The article linked below has some tips that may help you resolve the flickering issue that you are seeing on your TV.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
No video or no signal, image distortion, "snow," or flickering
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Cheers!
-Jason

Display issue coming out of sleep (w/ external display)

Hey everyone,
I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp).
I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent it to sleep and the integrated display's brightness was turned all the way down. Basically, the MacBook's integrated display won't light up. I then need to hold down the power button until the machine powers off, and start it up again. Only then will the display come on, and the machine start normally.
I've been observing this with both an external Thunderbolt Display, and a TV connected through the HDMI port. I don't think this is a Mac OS issue, as I've seen similar behavior on this same machine, running Windows, under Bootcamp.
An example scenario: I'll be using the Thunderbolt Display, or watching a movie on my TV, with the integrated display's brightness turned all the way down, and then, while the display is still connected, I will close the lid - The machine will go to sleep. I will then come the next day, and while the computer is asleep, disconnect the external display, and open the lid. The MacBook's integrated display will not light up, the brightness keys will not respond, and I will need to force-shutdown the machine, and start it again - it will then start up, and usually fall back to the lowest display resolution setting (even though I always use much higher resolutions on both the integrated and external displays).
I'm guessing this is happening because the computer is expecting the external display that was connected to it, during its last operation, to still be available, and when it's not - it panics!
Also, I had times where this happened, and a force-shutdown would not do the trick. I had to actually connect back to the external display, wait for the machine to start normally, take the integrated display's brightness back up, and disconnect the external display. The machine would then resume normal operation, and I would be able to disconnect the external display and work on the integrated display.
Has anyone else experienced this, or anything similar?

There we go. Here's the complete Console report, up until the reboot, which fixed things. I can't make anything out of this, but perhaps someone else can.
13/10/12 8:37:29.010 AM loginwindow[535]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
13/10/12 8:37:29.041 AM com.apple.launchd[1]: (com.apple.emond.aslmanager[2845]) Exited with code: 255
13/10/12 8:37:29.468 AM hidd[540]: MultitouchHID: device bootloaded
13/10/12 8:37:29.000 AM kernel[0]: Wake reason: EC.LidOpen EHC1 (User)
13/10/12 8:37:29.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
13/10/12 8:37:29.000 AM kernel[0]: RTC: PowerByCalendarDate setting ignored
13/10/12 8:37:29.000 AM kernel[0]: Previous Sleep Cause: 5
13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: TBT W (2): 0x0100 [x]
13/10/12 8:37:29.000 AM kernel[0]: The USB device BRCM20702 Hub (Port 1 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x1d181000) may have caused a wake by issuing a remote wakeup (3)
13/10/12 8:37:29.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
13/10/12 8:37:30.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:37:30.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
13/10/12 8:37:30.000 AM kernel[0]: AirPort: Link Up on en0
13/10/12 8:37:30.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
13/10/12 8:37:30.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:37:31.000 AM kernel[0]: AirPort: RSN handshake complete on en0
13/10/12 8:37:31.982 AM airportd[2838]: _doAutoJoin: Already associated to “w00***”. Bailing on auto-join.
13/10/12 8:37:32.459 AM configd[17]: network changed: v4(en0+:192.168.1.104) DNS+ Proxy+ SMB
13/10/12 8:37:32.498 AM UserEventAgent[11]: Captive: en0: Not probing 'w00***' (protected network)
13/10/12 8:37:32.514 AM configd[17]: network changed: v4(en0!:192.168.1.104) DNS Proxy SMB
13/10/12 8:37:35.780 AM com.apple.usbmuxd[518]: SCEDeviceSocketCallback USBMuxRecvWithTimeout failed for 0x10020cb90-iTunes/com.apple.iTunes:0->0x3d-192.168.1.101:0:0: 54 - Connection reset by peer
13/10/12 8:37:35.781 AM iTunes[2272]: _receive_message (thread 0x117992000): Could not securely receive message size: SSL_ERROR_SYSCALL (Early EOF reached)
13/10/12 8:37:36.284 AM iTunes[2272]: _send_message (thread 0x117992000): Could not securely send message size 406: SSL_ERROR_SYSCALL errno (Broken pipe).
13/10/12 8:37:36.286 AM iTunes[2272]: AMDeviceStopSession (thread 0x117992000): Could not stop session with device 61: kAMDSendMessageError
13/10/12 8:37:57.165 AM com.apple.usbmuxd[518]: _handle_timer heartbeat detected detach for device 0x3d-192.168.1.101:0!
13/10/12 8:38:14.000 AM kernel[0]: NVDA::setPowerState(0xffffff8026183800, 0 -> 2) timed out after 45406 ms
13/10/12 8:39:25.000 AM bootlog[0]: BOOT_TIME 1350110365 0
13/10/12 8:39:30.000 AM kernel[0]: PMAP: PCID enabled
13/10/12 8:39:30.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
13/10/12 8:39:30.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
13/10/12 8:39:30.000 AM kernel[0]: vm_page_bootstrap: 4043614 free pages and 117922 wired pages
13/10/12 8:39:30.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
13/10/12 8:39:30.000 AM kernel[0]: zone leak detection enabled
13/10/12 8:39:30.000 AM kernel[0]: standard timeslicing quantum is 10000 us
13/10/12 8:39:30.000 AM kernel[0]: standard background quantum is 2500 us
13/10/12 8:39:30.000 AM kernel[0]: mig_table_max_displ = 74
13/10/12 8:39:30.000 AM kernel[0]: TSC Deadline Timer supported and enabled
13/10/12 8:39:30.000 AM kernel[0]: corecrypto kext started!
13/10/12 8:39:30.000 AM kernel[0]: Running kernel space in FIPS MODE
13/10/12 8:39:30.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/12 8:39:30.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Sandbox
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Quarantine
13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
13/10/12 8:39:30.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
13/10/12 8:39:30.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
13/10/12 8:39:30.000 AM kernel[0]: MAC Framework successfully initialized
13/10/12 8:39:30.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
13/10/12 8:39:30.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
13/10/12 8:39:30.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
13/10/12 8:39:30.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration begin ]
13/10/12 8:39:30.000 AM kernel[0]: Sleep failure code 0x00000002 0x27006c00
13/10/12 8:39:30.000 AM kernel[0]: console relocated to 0xfd0020000
13/10/12 8:39:30.000 AM kernel[0]: PCI configuration changed (bridge=17 device=5 cardbus=0)
13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
13/10/12 8:39:30.000 AM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
13/10/12 8:39:30.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
13/10/12 8:39:30.000 AM kernel[0]: rooting via boot-uuid from /chosen: D6807041-7128-30C2-9A2D-BFEEC3331CEE
13/10/12 8:39:30.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
13/10/12 8:39:30.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM768E Media/IOGUIDPartitionScheme/Customer@2
13/10/12 8:39:30.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 3
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 4020736 to: 10443264 (joffset 0x12ada000)
13/10/12 8:39:30.000 AM kernel[0]: BTCOEXIST off
13/10/12 8:39:30.000 AM kernel[0]: BRCM tunables:
13/10/12 8:39:30.000 AM kernel[0]: pullmode[1] txringsize[ 256] reapmin[   32] reapcount[ 128]
13/10/12 8:39:30.000 AM kernel[0]: highWaterMark: VO[ 192] VI[ 192] BE[ 192] BK[ 192]
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: examining extra transactions starting @ 10443264 / 0x9f5a00
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: Extra txn replay stopped @ 11364864 / 0xad6a00
13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
13/10/12 8:39:30.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
13/10/12 8:39:30.000 AM kernel[0]: Kernel is LP64
13/10/12 8:39:30.000 AM kernel[0]: hfs: Removed 27 orphaned / unlinked files and 2233 directories
13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
13/10/12 8:39:30.783 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
13/10/12 8:39:31.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:48:ea:41
13/10/12 8:39:31.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13/10/12 8:39:31.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
13/10/12 8:39:32.037 AM airportd[25]: _processDLILEvent: en0 attached (down)
13/10/12 8:39:32.000 AM kernel[0]: createVirtIf(): ifRole = 1
13/10/12 8:39:32.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802247e400
13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
13/10/12 8:39:32.000 AM kernel[0]: Created virtif 0xffffff802247e400 p2p0
13/10/12 8:39:32.080 AM com.apple.SecurityServer[15]: Session 100000 created
13/10/12 8:39:32.000 AM kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).
13/10/12 8:39:32.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:39:32.101 AM configd[17]: network changed.
13/10/12 8:39:32.103 AM configd[17]: setting hostname to "w00fa.local"
13/10/12 8:39:32.112 AM com.apple.SecurityServer[15]: Entering service
13/10/12 8:39:32.193 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
13/10/12 8:39:32.000 AM kernel[0]: Previous Shutdown Cause: 3
13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe
13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0097
13/10/12 8:39:32.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
13/10/12 8:39:32.000 AM kernel[0]: AGC: 3.2.11, HW version=3.2.19 [3.2.8], flags:0, features:20600
13/10/12 8:39:32.000 AM kernel[0]: NVDAGK100HAL loaded and registered.
13/10/12 8:39:32.586 AM fseventsd[144]: event logs in /.fseventsd out of sync with volume. destroying old logs. (87566 7 87588)
13/10/12 8:39:32.586 AM fseventsd[144]: log dir: /.fseventsd getting new uuid: A93F6A97-D1D4-4728-9B86-3AB73E58340C
13/10/12 8:39:32.599 AM mDNSResponder[146]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
13/10/12 8:39:32.645 AM systemkeychain[148]: done file: /var/run/systemkeychaincheck.done
13/10/12 8:39:32.652 AM configd[17]: network changed: DNS*
13/10/12 8:39:32.654 AM mDNSResponder[146]: D2D_IPC: Loaded
13/10/12 8:39:32.654 AM mDNSResponder[146]: D2DInitialize succeeded
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Mounted /dev/rdisk0s4 (Read-Write, label "BOOTCAMP", NTFS 3.1)
13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,adaptiveuid,adaptivegid
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,allow_other,no nempty,relatime,fsname=/dev/disk0s4,volname=BOOTCAMP
13/10/12 8:39:33.000 AM kernel[0]: DSMOS has arrived
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
13/10/12 8:39:33.000 AM kernel[0]: Universal Audio Apollo - 4.0.0.13440 (x86_64) Mar 12 2012 20:19:07
13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
13/10/12 8:39:33.000 AM kernel[0]: TUFS: starting (version 2012.4.17, x86_64 (10.6+), built Apr 17 2012, 11:40:41)
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: License: Valid.
13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Ownership and permissions disabled, configuration type 1
13/10/12 8:39:33.301 AM fseventsd[144]: check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x10ee45528)
13/10/12 8:39:33.301 AM fseventsd[144]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: C0009105-8F61-43E9-8563-1BB388632E71
13/10/12 8:39:33.393 AM hidd[540]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
13/10/12 8:39:33.409 AM kdc[538]: label: default
13/10/12 8:39:33.409 AM kdc[538]:           dbname: od:/Local/Default
13/10/12 8:39:33.409 AM kdc[538]:           mkey_file: /var/db/krb5kdc/m-key
13/10/12 8:39:33.409 AM kdc[538]:           acl_file: /var/db/krb5kdc/kadmind.acl
13/10/12 8:39:33.432 AM appleeventsd[545]: main: Starting up
13/10/12 8:39:33.435 AM kdc[538]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
13/10/12 8:39:33.451 AM com.apple.usbmuxd[518]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13/10/12 8:39:33.507 AM loginwindow[535]: Login Window Application Started
13/10/12 8:39:33.508 AM kdc[538]: KDC started
13/10/12 8:39:33.510 AM awacsd[549]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
13/10/12 8:39:33.512 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.513 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.000 AM kernel[0]: macx_swapon SUCCESS
13/10/12 8:39:33.513 AM awacsd[549]: InnerStore CopyAllZones: no info in Dynamic Store
13/10/12 8:39:33.520 AM aosnotifyd[552]: bootstrap_look_up failed (44e)
13/10/12 8:39:33.539 AM locationd[536]: NOTICE,Location icon should now be in state 0
13/10/12 8:39:33.539 AM locationd[536]: locationd was started after an unclean shutdown
13/10/12 8:39:33.611 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
13/10/12 8:39:33.613 AM coreservicesd[27]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
13/10/12 8:39:33.615 AM mds[532]: (Normal) FMW: FMW 0 0
13/10/12 8:39:33.619 AM WindowServer[567]: Server is starting up
13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 retained (2 references)
13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 released (1 references)
13/10/12 8:39:33.635 AM WindowServer[567]: Session 256 retained (2 references)
13/10/12 8:39:33.636 AM WindowServer[567]: init_page_flip: page flip mode is on
13/10/12 8:39:33.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
13/10/12 8:39:33.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13/10/12 8:39:33.898 AM fseventsd[144]: Logging disabled completely for device:1: /Volumes/Recovery HD
13/10/12 8:39:34.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1350110375
13/10/12 8:39:34.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:39:34.831 AM WindowServer[567]: mux_initialize: Mode is dynamic
13/10/12 8:39:34.847 AM WindowServer[567]: GLCompositor enabled for tile size [256 x 256]
13/10/12 8:39:34.847 AM WindowServer[567]: CGXGLInitMipMap: mip map mode is on
13/10/12 8:39:34.933 AM WindowServer[567]: WSMachineUsesNewStyleMirroring: true
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x5 for display 0x042803c0
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x6 for display 0x003f003f
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x7 for display 0x003f003e
13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x8 for display 0x003f003d
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (1864, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (1865, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (1866, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
13/10/12 8:39:34.936 AM WindowServer[567]: CGXPerformInitialDisplayConfiguration
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[840 x 525], Rotation 0, Resolution 2
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1864,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1865,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1866,0)[1 x 1], Rotation 0, Resolution 1
13/10/12 8:39:34.936 AM WindowServer[567]: CGXMuxBoot: Boot normal
13/10/12 8:39:34.998 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x00004733, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004d23, unit 4, caps QEX|QGL|MIPMAP, vram 580 MB
13/10/12 8:39:35.003 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
13/10/12 8:39:35.006 AM loginwindow[535]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13/10/12 8:39:35.014 AM hidd[540]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
13/10/12 8:39:35.050 AM WindowServer[567]: Unable to open IOHIDSystem (e00002bd)
13/10/12 8:39:35.092 AM WindowServer[567]: Created shield window 0x9 for display 0x042803c0
13/10/12 8:39:35.092 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:35.108 AM launchctl[585]: com.apple.findmymacmessenger: Already loaded
13/10/12 8:39:35.124 AM com.apple.SecurityServer[15]: Session 100005 created
13/10/12 8:39:35.146 AM hidd[540]: CGSShutdownServerConnections: Detaching application from window server
13/10/12 8:39:35.146 AM hidd[540]: CGSDisplayServerShutdown: Detaching display subsystem from window server
13/10/12 8:39:35.163 AM loginwindow[535]: Login Window Started Security Agent
13/10/12 8:39:35.223 AM SecurityAgent[594]: This is the first run
13/10/12 8:39:35.223 AM SecurityAgent[594]: MacBuddy was run = 0
13/10/12 8:39:35.249 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320 isBackBuffered: 1 numComp: 3 numDisp: 3
13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.280987 AM [AirPlay] Started browsing for _airplay._tcp.
13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.281405 AM [AirPlay] Started browsing for _raop._tcp.
13/10/12 8:39:35.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
13/10/12 8:39:35.965 AM UserEventAgent[587]: cannot find useragent 1102
13/10/12 8:39:36.935 AM WindowServer[567]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
13/10/12 8:39:36.955 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:36.965 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
13/10/12 8:39:37.000 AM kernel[0]: directed SSID scan fail
13/10/12 8:39:39.274 AM SecurityAgent[594]: User info context values set for w00fa
13/10/12 8:39:39.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96 MAC AUTH succeeded
13/10/12 8:39:39.432 AM SecurityAgent[594]: Login Window login proceeding
13/10/12 8:39:39.618 AM loginwindow[535]: Login Window - Returned from Security Agent
13/10/12 8:39:39.631 AM loginwindow[535]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
13/10/12 8:39:39.657 AM loginwindow[535]: USER_PROCESS: 535 console
13/10/12 8:39:39.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
13/10/12 8:39:39.000 AM kernel[0]: AirPort: Link Up on en0
13/10/12 8:39:39.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
13/10/12 8:39:39.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: UserName
13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: GroupName
13/10/12 8:39:39.708 AM com.apple.launchd.peruser.501[610]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/10/12 8:39:39.712 AM loginwindow[535]: Connection with distnoted server was invalidated
13/10/12 8:39:39.717 AM distnoted[615]: # distnote server agent absolute time: 15.385943220   civil time: Sat Oct 13 08:39:39 2012   pid: 615 uid: 501 root: no
13/10/12 8:39:39.000 AM kernel[0]: AirPort: RSN handshake complete on en0
13/10/12 8:39:39.967 AM WindowServer[567]: Received display connect changed for display 0x42803c0
13/10/12 8:39:39.998 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320 isBackBuffered: 1 numComp: 3 numDisp: 3
Thanks!
-w00f

External displays - browser window position when disconnected display

I'm using a laptop, connecting one or two external displays, - one using the HDMI port, second using an USB "dock station" (Toshiba standalone). Second screen normally to the right, third screen (usb) above the laptop screen.
Often when I have disconnected the USB external display, my Firefox browser window are still "on the third display" - position as if this display was still active.
Even if I quit Firefox and restarts ( or even restarts windows ) the same position window is retained. The only way to fix it (when the USB connected display is not available), is to change the window position of the second (HDMI) display to cover the area of the USB one, then move Firefox window to my main laptop display, and then reposition the second screen back to the normal.
Normally, I expect applications to automatically reposition the windows to the available display(s) under the conditions that an extra display is removed. However, this seems not to happen with Firefox. It's inconvinient, but possible to fix with the second screen available, but I'm lost when I am not able to connect an external display ...
Is there any solution to this? Is it possible to change (reset) window positions directly in RegEdit ??

Dear varkgirl:
Thank you very much for your help and valuable suggestion.
I've tried your suggestion but ran into some problems. The links I am trying to open in another window are actually PDF files that the viewer can download from my website.
Since I was having problems I decided to try something else. After publishing the website to my desktop I then opened the pages where the links are in Dreamweaver. The layout view is great and displayed the image just the way it appears on the browser's window. I first selected the "link button" to the file and then in the inspector windows (bottom of the page) I chose under target the "_blank" option. This tells the software that the linked page or file is to be opened in a new blank browser window. I then saved the page (re-saved it over the existing file) to incorporate the changes. After this I proceeded to navigate through the website and everything works great.
Thank you for your help and suggestions. I just thought I would post this here in case it may be of help to you as well as others.
Best regards,
Joseph Chamberlain

Connect to TV as external display

Similar Messages

Maybe you are looking for