Connect to tv screen

I bought a mini display port to hdmi adaptortoday bin the Apple store
however, it is too small. How can I connect my Macbook to LG Tv screen?
Thanks

Hi
First of all the M50 is an oldie and not Win 7 pretested.
I didnt find any software for Win 7 for this Equium m50 and therefore I think this is the reason why the Fn buttons dont work.
You can try to install some Win 7 tools released for other notebook series,
You need VAP (value added package) and Flash Card Support Utility.
This is necessary to get FN buttons working.
In my opinion it seems like the TV has been set as an primary monitor... this would explain the black screen on internal notebook screen.
However, usually if you have connected an external monitor/TV or an projector to the notebook then you should be able to toggle between the screens using WINDOW button (win sign) + P
Check this!

Similar Messages

Froze upgrading ios 6 on connect to itunes screen not recognized by itunes and wont charge no power with usb

The guy at the Apple store said "Now thats a Brick" "I've never seen or heard of one this bad!"
I bought the phone with little to no info on it. I was told that it froze after several failed attempts at loading IOS 6.
Now... It will only turn on if plugged into wall, it will show black, then apple, then "connect to itunes" screen and thats it. As soon as I unplug, it dies. If I try power off, it turns back on and freezes in same place. Reset, same. And unabale to Factory restore cuz I cant unplug from wall. Im asuming its in dfu, nothing works.
When connected to USB,no power, no response from pc (win xp) or Itunes. Although... I swear I heard pc beap once as though it "found new hardware" but on inspection, Nothing.
My theories: 1) Battery is hooped. ( but I was told it worked fine a month ago) The longest I have had it charging is 4hrs and i died as soon as removed.
                    2) VCC conductor. Would explain USB issue.
                    3) The phone was "jailbroke" and IOS6 did not like that. Isnt there programs to reverse this?
                    4) IOS6 interupted, then phone got factory restored. Is it possible there is No "OS" on it?
I never touched an Iphone untill 2 days ago, and I have read and tried every troubshooting solution I could find. If I can fix this I'll be an expert!
Any help appreciated.

Hello, chipperp.
Thank you for visiting Apple Support Communities.
Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue persists, try the troubleshooting steps in the first article below. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

How to connect two DVI screens to Thunderbolt Display's Thunderbolt Port?

Hi everyone,
I have a new MBP and an external Thunderbolt Display. The Thunderbolt Display itself has a Thunderbolt port, and I was wondering if there is anyway to connect to DVI screens to that. My goal is to have the Thunderbolt Display and 2 x 24" Samsung DVI screens connected to my MBP.
Alternatively, has anyone had success using a third party device like the Matrox 2 go to drive multiple monitors from the usb port?
Thanks,
Dave.

You could try a TB>DVI adapter (here's one from Monoprice) but I don't know that it will work - I'm thinking that you could have at least one of your Samsung displays use it. You may also want to see if you can find a HDMI>DVI adapter for your second Samsung display - something like this?
I know that I've seen three monitor set-ups on YouTube - but I'm not sure what was connected to what. Easy enough to daisy-chain ATDs but it gets a bit tougher when utilizing HDMI ports, etc., and I'm not sure about the GPUs ability to drive all three displays.
Oops - sorry - strike that second paragraph - I thought that you were running a Retina display MBP...
Clinton
Message was edited by: clintonfrombirmingham

How do i connect my iMac Screen to Apple TV?

I have read i can connect my iMac Screen to my Apple TV via Airplay.
How do i do that?
I have Mac OS X Version 10.7.4
I have the OS X Lion ready to download and install, but can't back up my computer (no where to back it up to :/)

Welcome to the Apple Community.
OSX 10.7.4 is Lion
Lion doesn't support AirPlay of the Macs screen to the Apple TV.

How to connect a DELL screen (DVI-D) to MacAir via Thunderbolt

Hello,
can one connect a DELL screen (DVI-D) (eg Ultraslim S2230MX) to a MacAir via the Thunderbolt outlet using a
Mini DisplayPort to-DVI-Adapter ? Does anyone have experience with such a combination?
Many thanks, Werner

The Thunderbolt to DVI adapter does not discrimate what monitor is connected to it via DVI.
So yes, you can connect your Dell monitor to your MBA using the adapter.

Trying to update my iPhoneWhile 4 to iOs6 it froze on the connect to itunes screen and i needed to do a restore. But it restored my phone to january 2011 even though i just backed my phone up 2 weeks ago.

While trying to update my iPhone 4 to iOs6 it froze on the connect to itunes screen and i needed to do a restore. But it restored my phone to january 2011 even though i just backed my phone to my laptop up 2 weeks ago. I still have all my contacts but i lost a lot of apps and text messages. Is there any way to make it restore to my most recent back up?

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

Phone stuck on connect to itunes screen after update attempt

Hi, hope someone can help me. I connected my iPhone to my computer to transfer my photos from the phone to the PC. I have automatic syncing turned off.
When I connected, I was prompted to update the iTunes version, which I did. It's now version 9. Then I attempted to update the iPhone version. I got a message saying I had to transfer my purchases first, which I did. Then I tried the update again. The update seemed to take awhile, then I got a message saying it failed. There was a "More Information" button which just prompted me to send info to Apple, which I did. Unfortunately I didn't save the info.
At that point all my iPhone info no longer showed in iTunes, and the only active option is Restore. It does say "Your iPhone software is up to date," which would seem to indicate that the update did work...I tried disconnecting and reconnecting my phone. When I do this, I get the message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
I would rather not Restore the phone unless I have no other options, since I have 600 pics, contacts, etc on the phone...Of course not backed up since this is the first time I've tried to transfer data.
So I tried a few things:
- I disconnected and reconnected the phone several times.
- I restarted the computer several times.
- I went to the Apple site and tried the troubleshooting steps for "stuck on connect to itunes screen" (which is what my phone is currently doing).
- I ran the diagnostic checks in iTunes (output below - I ran this while the phone was plugged in yet it says it's not found).
- I held down the Home and the Sleep/Wake button until I see the Apple icon.
- I went to My Computer > Manage and tried to update drivers, but the phone doesn't show in the device manager.
- I tried a different USB port and there are no other devices connected to the machine.
Nothing worked, my phone is stuck on the connect to iTunes screen and I get the error message every time I plug it in. I haven't tried another computer bc I don't have one and I'm not sure how to create/use another user account on this machine.
I wouldn't mind calling support but my phone doesn't work...Any help is much appreciated. Thanks in advance.
============
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
ASUSTeK Computer INC. 1005HA
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
Current user is an administrator.
The current local date and time is 2010-03-31 02:42:39.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 945 Express Chipset Family
Mobile Intel(R) 945 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-03-31 02:22:42.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.3
iPhone 3G running firmware version 3.0
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
Message was edited by: gobblygook
Message was edited by: gobblygook

Your only choice at this point is to restore your iphone. Since it appears from your post that you have never synced to this computer, you of course will not have a backup to restore from. That means your only choice is to restore as a new device & re-sync your itunes content. Unfortunately, all of your contacts, calendars, pics in your camera roll, etc., will be lost. Its not a good idea to use the iphone or any phone for that matter as a storage device, as things like this can & do happen. You should be syncing on a regular basis. The first thing done when you do sync is an iphone backup. You should also transfer pics in your camera roll to a supported application on your computer on a regular basis, much like any digital camera. You can always sync pics back to your phone, but if the only copies are on the phone, you run the risk of losing them.
See if you can force the phone into recovery mode:
Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

HT201263 My iPhone 4 is stuck on the "Connect to iTunes screen" after trying to update to iOS 7.0.4! Help!

I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
I have:
-Restarted my computer
-Updated iTunes to most current version
-Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
-Turned on, turned on and held home button (nothing happens)
-My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?

I was able to restore my phone!!!
I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
Solution:
After trying EVERYTHING this is the ONLY thing that worked-
I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!)

Ipod touch 4G is stuck in "connect to itunes" screen.

I just got my brand new Ipod Touch 4G (iOS 4.3.5), I connected it to my PC and put some music on it, I was using itunes 10.4.
I update to itunes 10.5.0 and it wouldn't recognize my ipod. I searched online for solutions with no luck.
Itunes says: "itunes was not properly install....."
In My Computer my ipod showed as Camera Device, wouldn't let me copy videos or pictures to the folder.
In Device Manager, Apple Mobile Device (Recovery Mode) has the yellow warning triangle
I don't have a CD with the ipod software -it didn't come with it- but I downloaded iOS 4.3.4, iOS 4.3.5 and iOS 5 in case I need them.
I updated to itunes 10.5.1 and it recogized my ipod, it said a new iOS 5 was available, so I click to update to it.
Everything was going right, until my ipod got stuck in the "connect to itunes" screen, and it didn't restore. (error 1604)
Some times (with no reason at all) itunes would recognize my ipod and say "itunes has detected an ipod in recovery mode. you must restore this ipod before it can be used with itunes" I click OK, Restore and Update, it takes some time and then, "error 1604"
I've been searching online, but nothing works, I've tried these:
-Putting the ipod in DFU mode, it would restart the ipod but the same screen will come up.
-I uninstall, verified and reinstall itunes and its components (itunes, QT, Apple Software Update, AMDS, Bonjour, Apple Application Support)
-Restart a million times my pc after installing.
-downloaded fixrecovery.exe but it won't even start because zlib1.dll was not found.
-downloaded RecBoot and it says "I must install the following .NET framework: v4.0.30319" -How do I know what framework I have???
inside the RecBoot folder was the program iPHUCWIN32.exe, I started it and it says "this application has failed to start because iTunesMobileDevice.dll was not found".
*Note:
My HP Pavilion G60-235DX Notebook won't let me install updates from the Windows Update software (error 80096001). for a while now.
The DVD/CD drive dissapeared from my computer (about 2 months ago), haven't found a solution for it yet (can't afford to take it to a repair shop or send to HP) that's why I'm trying myself.
I want a solution for the IPOD problem, the rest will come later.
Seriously guys, can some one help me with this? I'm desperated...
Any good software to restore my ipod ? (I don't care about erasing all the content -I want it to work like it supposed to).

I connected my ipod to another pc with windows vista also, with itunes ver. 10.4.1.10 but error 3194 came out, so now I'm going to try this:
Exit iTunes
Locate your hosts file:
In Mac OS X /etc/hosts
In Windows c:\windows\system32\drivers\etc\hosts
Open the hosts file with Administrator privileges using Notepad.
Add the following lines to the very bottom of the hosts file:
#74.208.105.171 gs.apple.com
Connect your device to the computer
Launch iTunes
Put device into DFU Mode by turning your device off and then holding down the sleep and power button for 10 seconds, then release the power button but hold onto the home button until iTunes tells you that the device is now in recover mode
Use the iTunes Restore feature as usual with the iOS device
Once your iOS update is finished, remove the “#74.208.105.171 gs.apple.com” line from your hosts file again so that iTunes can properly update as usual.
<Links Edited by Host>

My iPod touch is disabled and has a passcode but it won't let me type in the passcode it's stuck on connect to iTunes screen help!!!!!

My iPod touch 8th 3rd gen is stuck on the connect to iTunes screen and won't let me do anything and iTunes won't restore it or do anything because there is a password on it and I can't type it in on the touch since it's stuck on this screen help please I've tried doin the power and menu button to restart it and it goes right back to connect to iTunes someone please helpme

Try again placing the iPod in recovery mode. It can be tricky. The computer should say it discovered an iPod in recovery mode. Recovery mode bypasses the passcode (and erases the iPod). If not successful, try placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

IPod Touch is stuck in "connect to iTunes" screen. It is not recognized by iTunes or by my Windows (64-bit) computer.

I recently purchased a new laptop after my old one ceased to function. Therefore, I had lost ,my old iTunes, and my iPod is no longer authorized by a functioning computer. I downloaded the latest version of iTunes, plugged my iPod in, and tried to install the new iPod Touch software update. I got the error message that the installation had failed, and iTunes automatically ejected my iPod, leaving it in the "connect to iTunes" screen, in which it has been stuck ever since (about 9 days now). I have uninstalled and re-installed iTunes, have rebooted my computer numerous times, I have tried various holdings of the power button and home button as recommended on several help forums, etc. to no avail. I am using a Windows 7 (64-bit) system on a brand new HP Pavilion dm4 laptop with plenty of space and the newest version of iTunes installed. My iPod Touch (3G) is not being recognized by iTunes or by my laptop. I would like to, if possible, restore my iPod to original factory settings so that it can be authorized on my new laptop and will sync approrpiately. Any help anyone can provide will be immensely appreciated. Thank you.
Also, the iTunes is the version for a 64-bit Windows OS.

- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

HT1212 got an ipod from a friend and tryed to start it up and it is stuck in the connect to itunes screen and it will not pop up on itunes all in all it says i have to enter my password but i cant because its in the connet to itunes screen. help please!!!

i got an ipod from a friend and i tryed to start it up and it is stuck on the connect to itunes screen, it wont even pop up on itunes it says i have to put in my password to continue but i cant because it is stuck please help me!!!!!!!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT201263 My phone is stuck on the connect to itunes screen and i cant go into DFU mode, what do i do now?

What do i do now? i tried everything, when i plug my iphone cable into my com, it shows me the connect to itunes screen, when i unplug it it turns off and when i turn it back on it stays the same. help pls

You should not need DFU mode - you phone is already in recovery mode - you just need to restore it in itunes. If you unable to restore you need to try another computer - preferably other network as well. If it is still not restored - it is a hardware problem.

Ipod touch 1st gen stuck at connect to itunes screen and wont restore

So can someone help i came home yesterday and i was looking for my ipod well when i found it. It was off when it usually stays on for ever after i charge it i try to cut it on and it goes to the connect to itunes screen so i try to restore it and it give me a error message saying unknown error (1) occured. I dont know what to do please help

Try on another computer with another USB cable.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT201210 restoring ipod and it say's can't find software and use a cd-rom if necessary. what am i supposed to do? my ipod is stuck on the connect to itunes screen and wont do anything.

Restoring ipod and it say's can't find software and use a cd-rom if necessary. My ipod is stuck on the connect to itunes screen and wont do anything. What am i supposed to do?
Please help, i will be very grateful

you can do is go to ijailbreak.com then select downloads section.......scroll down and see the latest version of ipod touch second generation is available for download.....when it gets downloaded connect your iPod to itunes or keep it connected then hold option and click restore (mac) search the software by writing in search "iPod" a thing with white cube will show up if it is the file you just downloaded click it and wait for itunes to do its work......you can ask more if you are on windows

Connect to tv screen

Similar Messages

Maybe you are looking for