Connect & transfer data from SQL Server Database

Hi all,
I would like to connect to MS SQL Server Database and transfer data from the data stored in the SQL Server Database tables into Oracle Tables.
How should I go about doing this ?
P.S.: I am using Oracle 11g and SQL Server 2005
Message was edited by:
Monk

What operating system is your Oracle database running on?
If you're running Oracle on Windows, you can use Heterogeneous Services and Generic Connectivity along with the Microsoft SQL Server ODBC driver to create a database link from Oracle to SQL Server. If you're running Oracle on something other than Windows, you can do the same thing, but you would generally need to license either a third party ODBC driver or one of the Oracle Transparent Gateway products.
Justin

Similar Messages

Exporting data from SQL Server database to Oracle database

Hello All,
We need to replicate a table's data of SQL Server database to Oracle database.
Can this task be accomplished using Import/Export wizard or Linked servers?
Can help me regarding which Oracle data access components should i download to do this?
I am using SQL Server 2012.
And i have Oracle 11g release 2 client installed in my system.
Thanks in Advance.
Thanks and Regards, Readers please vote for my posts if the questions i asked are helpful.

Yes you can definitely transfer data from SQL server to Oracle Have a look at below links
Export SQL server data to Oracle Using SSIS
Use OLEDB data provider to transfer data from SQL server to Oracle
Using Import Export Wizard
Similar thread
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Retrieving Data from SQL Server Database

Hi All,
I am working with a program in which i have a requirement to connect to SQL Server Database
and extract the data from the SQL Server Database. I am able to connect to the SQL Database but i am facing problem with the Select Statement. I have the Select Statement
Select PARTNRID from GBA_SI.TRACKING and REFERENCEID3 from HEADER where TRANSTYPE = "INVOIC" and WICOMPLETEDDATETIME is within the date range specified in selection screen (Join on TRANSID).
Can any one tell me how to write the Select Statement in ABAP for retrieving the data from the SQL Server Database.
Regards,
Sudhir

hi check this..
data: begin of itab occurs 0,
       PARTNRID like GBA_SI-PARTNRID,
      end of itab .
data: begin of itab1 occurs 0,
        TRANSID like header-TRANSID,
        TRANSTYPE like header-TRANSTYPE ,
        REFERENCEID3 like header-REFERENCEID3,
        end of itab1 .
select-options:s_PARTNRID for GBA_SI-PARTNRID ,
                     s_date for sy-datum.
Select PARTNRID
    from GBA_SI
         into table itab
where PARTNRID in s_PARTNRID.
select TRANSID
         TRANSTYPE
REFERENCEID3 from HEADER
into table itab1
for all entries in itab
where TRANSID = itab-PARTNRID
     and TRANSTYPE = "INVOIC"
and WICOMPLETEDDATETIME in s_date .
regards,
venkat appikonda

Transfer data from SQL Server 7.0 to Oracle 7.3.3

Hi there,
We need to transfer some of the data (not whole database) from
a SQL Server 7.0 database to an Oracle 7.3.3 database. Are there
any tools that we can use? Which tool do you recommend?
Thanks in advance.
Catherine
null

hi Catherine,
Download the Oracle Migration Workbench for SQL Server 7.0 from
this site. It is located under the Software section of the Oracle
Migration Workbench page.
Regards
John
Catherine (guest) wrote:
: Hi there,
: We need to transfer some of the data (not whole database) from
: a SQL Server 7.0 database to an Oracle 7.3.3 database. Are
there
: any tools that we can use? Which tool do you recommend?
: Thanks in advance.
: Catherine
Oracle Technology Network
http://technet.oracle.com
null

Read image data from SQL Server database and display it in a JSP web page

Hi experts,
I am doing a project in which I have to upload images to the database via JSP/servlets. I am able to do this.
Now I want users to view and dowload these images which are stored in the database.
Please help me of how can I read the images from the database and display it on jsp webpage and also can be downloaded by users via jsp pages on client side.
Please help!

Hi you may go through the below post to find what could be a better way to do that.
http://forum.java.sun.com/thread.jspa?threadID=5163829
REGARDS,
RaHuL

Error while reversing data from SQL Server to ODI

hi,
I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022.
And now, I am getting the below error while reversing the data from SQL Server database.
0 : 08001 : java.sql.SQLException: No suitable driver
Looking for the assistance on the same.
Thanks,
Abhay

If everything is fine the reversing should be fine. I would say check again if the Technology of the Model and the also the dataserver is created under the right Technology in topology too.
also if this doesn't help , Please tell us the steps you have carried so far . Also can you try selective reverse is it showing the tables.

Junk arabic details while transfer arabic data from sql server 2000 to orac

We are facing problems to view arabic details in oracle which is transfered from sql server 2000 .
In oracle database we are using charecterset is UTF8.
NLS_CHARACTERSET :UTF8 and NLS_NCHAR_CHARACTERSET:UTF8
Sqlr server collation is SQL_Latin1_General_CP1256_CI_AS.
we are using stored procedure for transfering data from sql server 2000 to oracle.
And i am able to view some arbic details which is not transfered from sql server 2000.
I thing some configuration i need to change in sql server.
Can any one help me out from this issue?

I know that this is not the correct forum to ask this question.
If someone knows this issue please help me.
We were using to import from another intermediate sqlserver and it was successfull.
And more over i cannot change anything in oracle database which is live.
The issue is we are using one intermediate sqlserver for transfering the data to oracle apart from main sqlserver.
now we want to stop the intermediate and need to transfer from main sqlserver to oracle Db.
i guess , i need to change some configuration in main sql server.
Main sql server and intermediate have the same collation.
Could you please help me out from this problem?

How to select data from Sql server 2005 database tableinto oracle database table

Hi,
I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
Thanks a lot in advance.
rk
OS: Windows 7 professional

Hi,
you can use export/import wizard and specify sql server as a source and oracle as destination.
I hope this is helpful.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Loading data from SQL server to Oracle database

i want to create one table in oracle db from table in sql server. Table is huge it got 97,456,789 records.
I created db link (HS) in oracle database which is pointing to sql server. i can select that table from oracle thru db link.
select * from "dbo"."t1@dblink;
i fired below create table.
create table t2 nologging parallel (degree=3) as select * from "dbo"."t1@dblink;
and its taking long time.... but its running...
is there any alternate method to do this and and populate table in oracle db faster.
Please advise. thanks.

vhiware wrote:
create table t2 nologging parallel (degree=3) as select * from "dbo"."t1@dblink;
and its taking long time.... but its running...I doubt that parallel processing will be used as this is unique to Oracle (using rowid ranges typically) and not SQL-Server.
is there any alternate method to do this and and populate table in oracle db faster.Part of the performance overhead is pulling that data from SQL-Server to Oracle across the network link between them. This can be sped up by compressing the data first - and then transferring that across the network.
For example: using +bcp+ to export the data on the SQL-Server box to a CSV file, compress/zip the file, scp/sftp the file to Oracle, and then unzipping it there. Parallel and direct load processing can now be done using SQL*Loader to load the CSV into Oracle.
If this is a Linux/Unix base system, then the unzip/decompress process can be run in parallel with the SQL*Loader process by creating a pipe between the two - where the unzip process writes uncompressed data into the pipe and SQL*Loader reads and loads data as it becomes available via the pipe.
Alternatively, you can do you own PQ processing. Let's say the data is date ranged. You can create a procedure on Oracle that looks something like this:
{code}
create or replace procedure CopyDay( day date ) is
begin
insert /*+ append */ into local_tab select * from remote_tab@remotedb where col_day = day;
-- add logging info, commit, etc.
end;
{code}
You can now start 10 or more of these for different days and run it in the background using DBMS_JOB.

Copying database objects and data from one server database to another server database in AG group

Hi,
I am still trying to wrap my head around sql clusters and AGs and I have a project that requires I take a vendor's database and restore it weekly so its available on the production server which is clustered.
The vendor's database on the cluster is in an AG group and encrypted.
Right now, I plan to restore the database on a sql staging server and use the SSIS Transfer SQL Server Objects Task to copy the table structure and data from Stage to the Production database of same name and I would first drop the objects in production
database using the same task.
I am concerned that this might cause issues with the passive cluster due to "logging" from active to passive. The database is about 260 MBs and I am not sure how many tables.
Has anyone run into this type of scenario before or have a better solution?
Thanks
Sue

IF I understand anything about clustered sql and logging, the sql server should take the log file and recreate the same scenario on the passive side of the cluster.
Is that correct?
Hi Sue,
Yes, for AlwaysOn Availability Group, the transaction log is basically replayed from the primary to all of the secondary's.
Besides, from my point of view, as we cannot directly restore a database that is part of an Availability Group, it is a good way using SSIS task to drop and recreate all tables then transfer data from the restored database to the primary replica. Schema changes
and data changes will also happen on the secondary replica.
There are some similar links for your reference.
http://dba.stackexchange.com/questions/21404/do-schema-changes-break-sql-server-2012-alwayson-or-are-they-handled-transpare
http://blogs.msdn.com/b/sqlgardner/archive/2012/08/28/sql-2012-alwayson-and-backups-part-3-restore.aspx
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Extract the data from SQL Server and Import into Oracle

Hi,
I would like to run a daily job that will export the table data from SQL server table (it will be only one or two table) and Import back into Oracle table (it might one or two table tables).
Could you please guide me that how can i do this using either sql server or oracle?
We have oracle 9.2 and sql server 2005.
Normally i do from flat file which is generated by source destination nand i dump into oracle using sql*loader but this time I have to directly extract/export the data from MS Sql server and load into Oracle table, mostly it will reload so i might doing any massaging data during the load.
If you show me the detail approach, it will be really appreciated.
I have access to Sql server but i don't how to use sql server to do this or using oracle as a daily job even becuase have to schedule the job for this as it will be a daily job.
Thanks,
poratips

Unless you can find an open source ODBC driver for SQL Server that runs on Solaris (and I wouldn't be overly hopeful there) Heterogeneous Services would require that you license something-- a third party ODBC driver, a new Oracle instance, or an Oracle Transparent Gateway.
As I stated below, you could certainly use SQL Server's ETL tool, DTS. Oracle's ETL tools would require additional licensing since you're just on 9.2. You could also write a small application (Java or otherwise) that connected to both databases and transferred the data. If you're particularly enterprising, you could load the SQL Server Type 4 JDBC driver into Oracle's JVM and write a Java stored procedure that connected to the SQL Server database via JDBC, but that's a pretty convoluted approach.
Justin

Using Oracle Forms Importing Data From SQL Server into Oracle Tables.

Dear All,
We are using Oracle Forms 10g in windows XP and having OAS 10g and Oracle database 9i.
How can we import data from SQL Server 2005 into Oracle tables using Oracle Forms?
Thanks & Regards
Eidy

I have no idea what "Oracle Hetrogenius Services" is, so I can't help you with that, sorry.
SQL Developer might also assist you. SQL Developer can connect to SQL Server as well as Oracle and has some tools for migration. See the documentation for details:
http://download.oracle.com/docs/cd/E12151_01/doc.150/e12156/toc.htm
For additional help on using SQL Developer for this task, please consult Support or the SQL Developer forum: SQL Developer
Hope this helps,
Jacob

Fetch the data from sql server table to array

In the following script i am fetching the servers details from text file. Please anyone help me to get the same information from sql server database table. with using this query
"SELECT DISTINCT [server_name]
FROM
Servers] where
Status='1'"
$ServerName =Get-Content "c:\servers\servers.txt"
foreach ($Server in $ServerName) {
     if (test-Connection -ComputerName $Server -Count 4 -Delay 2 -Quiet ) {
       write-output "$Server is alive and Pinging `n"
       } else {
Write-output "TXUE $Server seems dead not pinging"

i have tested it is not working..
=@"
SELECT DISTINCT [server_name] FROM Servers] where Status='1'
$connection
=new-objectsystem.data.sqlclient.sqlconnection(
"Data Source=xxx;Initial Catalog=xxx;Integrated Security=SSPI;”)
$adapter
=new-objectsystem.data.sqlclient.sqldataadapter($query,
$connection)
$table
=new-objectsystem.data.datatable
$adapter
.Fill($table)
| out-null
$compArray
=@($table)
##### Script Starts Here ######
foreach($Serverin$ServerName)
if(test-Connection-ComputerName$Server-Count4
-Delay2
-Quiet)
write-output"$Server
is alive and Pinging `n"
else{
$query

Reg. Migrating data from SQL Server 2000 to Oracle

Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathap

hi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R

Loading data from SQL server 2000 to Oracle using OWB 10.2

Hi All,
I have to move data from SQL server to Oracle using OWB. Any idea how to connect to SQL Server thru the OWB design centre console. There is no detail available in the documentation. OWB cocumentation says that "OWB Integrator for Oracle DB & Apps 3.0" is available to connect to Non-Oracle Database (including Sybase, Informix, ODBC).

Hi,
yes, you can use ODBC and configure HSODBC on the database server to create a database link to the sql-server. If your oracle server is microsoft based you are ready, otherwise you have to buy an odbc-driver for linux, unix or whatever you use.
Ciao Stephan

Connect & transfer data from SQL Server Database

Similar Messages

Maybe you are looking for