Connect two Macs to one Thunderbolt Display?

I am using a MacBook Pro and Thunderbolt Display. I own also a Mac Mini without Thunderbolt port but HDMI and wonder if I can connect this Mac mini to my Display as well using the second Thunderbolt port on the Display and a HDMI/Thunderbolt adapter? I have been searching for a HDMI/Thunderbolt switch but without success. Any other thoughts?

TB display will only work using TB port.  There is no adapter that I know of to connect to any other type of port.

Similar Messages

  • How to connect two DVI screens to Thunderbolt Display's Thunderbolt Port?

    Hi everyone,
    I have a new MBP and an external Thunderbolt Display. The Thunderbolt Display itself has a Thunderbolt port, and I was wondering if there is anyway to connect to DVI screens to that. My goal is to have the Thunderbolt Display and 2 x 24" Samsung DVI screens connected to my MBP.
    Alternatively, has anyone had success using a third party device like the Matrox 2 go to drive multiple monitors from the usb port?
    Thanks,
    Dave.

    You could try a TB>DVI adapter (here's one from Monoprice) but I don't know that it will work - I'm thinking that you could have at least one of your Samsung displays use it. You may also want to see if you can find a HDMI>DVI adapter for your second Samsung display - something like this?
    I know that I've seen three monitor set-ups on YouTube - but I'm not sure what was connected to what. Easy enough to daisy-chain ATDs but it gets a bit tougher when utilizing HDMI ports, etc., and I'm not sure about the GPUs ability to drive all three displays.
    Oops - sorry - strike that second paragraph - I thought that you were running a Retina display MBP...
    Clinton
    Message was edited by: clintonfrombirmingham

  • Connecting two Macs to one router

    I just ordered a new iMac and would like to connect it and my old computer (eMac) to one router so that they share the same network.  Is this possible?  If so,
    Could you explain how to do this.  

    Yes it should be easy if all devices have wifi. The iMac will have, hopefully the router has, but does the eMac? Do eMac's have wifi built in?
    If the router is wifi it'll have a wifi password, normally WPA, WPA/2 or WEP, either on the documentation or on a sticker on the bottom of the router. Turn wifi on on the Macs and they should see the network, type the password when prompted and they should connect.
    If the eMac doesn't have wifi you could connect to the router via an ethernet cable and it should be seen on the network.

  • Can you connect more then one external screen to a mac with one mini display point?

    Does any one know if you can connect more then one external screen to a mac, with one mini display point?

    This company has a dual monitor solution for DisplayPort;
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • Will my Mac automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

    Will my 2012 Macbook pro retina  automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

    Depends.
    If you go in System Preferences / Network, you will see a list of all the network interfaces your current configuration has. If you click on the gear icon next to the minus sign, the drop menu will offer "Set Service Order...". There you can prioritize the order of use: Ethernet above Wi-Fi and wireless will be ignored if Ethernet is available.
    Note that the Wi-Fi card will remain active and associated with an access point nonetheless. It just won't be used for communications by the OS and apps.

  • Can I connect two macs with thunder bolt ?

    can i connect two macs with thunderbolt like I do with firewire and IP? I don't want to transfer files by using the control "T" at startup . I want use VNC to control one mac from the other and use thunderbolt vs ethernet.
    thanks for any help

    You can connect the two.  Whether you can use VNC, I have no idea.
    http://store.apple.com/us/product/MC913ZM/A
    Ciao.

  • Is it possible to connect two Macs via USB ?

    Is it possible to connect two Macs via USB just like Firewire back in the day via Target mode or is there something similar? I am asking this because about 2-3 years ago I would normally image Macs via Target Mode. I used to have a regular Macbook running 10.6 along with a customized-ready-to-go .dmg image saved on the Desktop. Whenever I needed to put that image into any Mac I would simply connect the two Macs via Firewire, I would then press "T" at startup which will get me in Target Mode, I would then see the disk appear in the desktop of the Mac I had the image. I would then copy that image to the T mode macbook using super duper. Can this still be done through USB with new models and if so will I also need to press T at startup ?

    No, USB connection does not qualify for this, only firewire and thunderbolt, as I read (but cannot test, for the time being I have only one such mac around).
    This is why the short series of alu MBs (2008) are not qualified for target mode either.
    p.s. What ‘new models’ do you refer to?

  • Sharing between two macs with one user account?

    Is it possible to connect two macs to share documents and music if they are both logged into the same user account?
    I recently bought a Mac Mini and when setting it up, I transferred everything from my Macbook Pro to it, including my user profile which I now also use on the Mini.
    Since setting up the Mini, I've been using both machines so the content on both is no longer identical. There have been occassions where I have wanted to transfer something from the MBP to the Mini or vice-versa over wi-fi and have encountered problems. I suspect this is because I am using the same user account and they get confused.
    I don't need the two macs to be identical in their content, however there are times when I want to share or quickly transfer music, documents or Garageband files from one to another. Would I be better off setting up different profiles for the Mini and the MBP to achieve this? Is there a better way to do what I'm trying to do?

    There have been occassions where I have wanted to transfer something from the MBP to the Mini or vice-versa over wi-fi and have encountered problems. I suspect this is because I am using the same user account and they get confused.
    Could you please explain, what kind of problems exactly you encountered? Error messages? Corrupted files? And why do you think the problem is caused by the same user profiles?
    Like markwmsn I have no problem with sharing using the same account name on all my macs. Only since upgrading to Mt. Lion I usually use AirDrop to send single files. That saves the trouble to copy the files to a public folder.
    Do both your macs support Air Drop?
    OS X Lion: Share your files with others near you
    and the requirements:  HT5444
    Regards
    Léonie

  • Booting two Macs from one external drive: 10.8 and App Store?

    I boot two Macs from one external harddrive. Does this mean that when 10.8 is sold exclusively via the App Store and thereby linked to a unique hardware identifier, I am going to have issues with activation/authentification each time I switch machines? I have avoided the App Store since I discovered that an app I bought there, and which I really needed to open automatically on log-in, had to be manually re-activated with my Apple ID after every switch (so that I eventually deleted it and reverted to an earlier, non-App Store version).

    Welcome to the forum!
      There are a couple of "solutions" to your problem.  The easiest, and possibly the best for you (although it is a bit slower) is to copy your catalog onto the external drive as well.
    Then when you plug in the drive, you will always have your latest catalog for access.
    The other way is to keep a local copy of your catalog, and copy it onto the local drive as a way to transfer it from one computer to the other.
    This has the problem of possibly not being in sync, that is, you forgot to copy it over once and did some editing.  Then you would end up with essentually two different catalogs, instead of one in two places.
      You can copy the catalog either with your OS, or you can "export as catalog" and specify the external drive as the destination.  Then, on your other computer, "import from catalog" and only take the meta-data settings (it's on the import dialog box).
    Personally, when I'm traveling, I have my catalog on my external drive as well.  It just makes life easier, and I don't have to worry about it being out of sync, or losing it (and not the images).
    So, I would go with the first method, at least to start.  To get your catalog over there, you can either export as catalog or copy it, either one will work.
    You can find the location of your catalog file (if you don't know where it is) in the catalog settings menu prompt.  Both the location and the name will be displayed.
    Cheers!

  • Can connect two Macs with USB2 cable?

    Can connect two Macs with USB2 cable?

    You can connect two Macs with an ethernet wire, or conect two Macs using Firewire if one is placed in target disk mode, but that is it.

  • Two mac laptops, one iPhone and an iPod touch. Sync apps?

    Hi there, between my wife and I, we have two Mac laptops, one iPhone and an iPod touch.  The iPod touch is new- is it possible to get the apps that have already been purchased for the iPhone, onto the iTouch?

    schmjorgen wrote:
    but can i then only ever use both the iphone and itouch with that particular mac?
    you can use home sharing to transfer media files (incl. apps) between the two Macs. if you and your wife use separate Apple ID's to purchase content, authorize the wife's machine for yours and yours for hers.
    is there a way to make both portable devices work with both macs?
    by design, iOS devices sync with only one library at a time.
    i am hoping the "home sharing" feature will be the answer but so far i have not been able to make it work.
    these links may prove helpful:
    Setting up Home Sharing on your computer
    Troubleshooting Home Sharing

  • Directly Connect Two Macs Via Ethernet

    This has certainly been answered before, but a quick search didn't give any results. So here goes ...
    I wanted to connect two macs via ethernet. I use the mount tool in finder "connect to server" all the time with machines on a network, but I've never done with with two macs directly connected.
    So I connect them and my first instinct is to check the IP address of the machine I want to connect to. I then go to "connect to server" and type it in using the AFP protocol, but it doesn't work.
    At this point I'm stumped and not sure what to do. I don't use the "network" item in the finder sidebar very often but I clicked it, and sure enough the machine I want to connect to was listed, and I was able to connect / mount.
    So here's my question ... if I wanted to use "connect to server" tool, or even mount it manually with the mount command, how would I do it? Is it using AFP still to mount and the IP address is just bogus? Something else going on?

    But I'm telling you I tried using the IP address ... here, let me try again ...
    I find this address on the machine I want to connect to: 169.254.177.122
    I put this into "connect to server" on the machine I want to connect from: afp://169.254.177.122
    It spins for a while, then says it can't connect. Strangely, if I do a cmd-i on the machine in the network sidebar, it says: nfs:// automount ... into /Network
    So are you sure putting in the ip should work? If so what am I doing wrong?
    Okay ... plot thickens. When I cmd-i after I connect, it indeed says it is an AFP connect, but it gives the "local" name, say powerbook.local. But then, if I "ping powerbook.local" if gives me back the same IP I tried in connect to server. Huh?
    mbp:~ rjcarr$ ping powerbook.local
    PING powerbook.local (169.254.177.122): 56 data bytes
    Weird. It isn't that big of a deal ... I just like to know what is going on.

  • Connect two macs wirelessly

    How to connect two mac wirelessly?
    I tried creating a network, but after that, I can't connect the internet.

    If each Mac can get on the Internet, without re-wiring, your network is already in place.
    Do not create a Network. If you did, you will need to tear that down before proceeding.
    Enable File Sharing on each Mac, NOT Internet Sharing.
    Mac 101: File Sharing

  • Can I backup two macs onto one external time machine?

    Can I backup two macs onto one external time machine drive? I am trying to do this over Wi-Fi.

    Yes, the external drive has to be formatted correctly to HFS+ and shared to the network.
    It doesn't matter how the second machine logs into the network but wireless back will be extremely slow as it will involve double hop wireless, I presume to a wifi router somewhere. For incremental backups this is no biggie but do the initial backup with the drive plugged into that particular computer or over ethernet.. gigabit for preference.
    Pondini has some instructions as he has for most things.
    http://pondini.org/TM/4.html
    Also look at Q33 where he lists using a shared drive on another Mac.
    If you are planning using something other than wifi router give clear information about the network layout you have and hope to use.

  • Can I connect two computers to one device?

    Can I connect two computers to one device? I am trying to have them control different aspects of the experiment that I'm running.

    That depends upon the device. If it's GPIB, you could
    use the E-NET card to convert it to LAN. That would
    allow control by many computers. The only problem with
    that might be sychronization. That is, Computer 1 does
    its setup. Then Computer 2 does a reset. Compuer 1's
    setup is now gone.
    As another poster suggested, you could always network
    between the two computers.
    [email protected]

Maybe you are looking for