Connect two systems (CTS) after independent upgrade

Hello
I've installed two Netweavers with the same types and component.
After that
1) I configured a transport route between the two system.
2) I imported 100s of notes in the first NW
3) I transported the notes in the 2nd NW
Then I updated the two systems INDEPENDENTLY (in parallel):
1st NW: SPAM, SAINT, SPAM
2nd NW. SAINT, SPAM
At the end both systems have exactly the same Support Packages.
Question: What should I check now to be sure that, if in the future a transport changes from the 1st NW to the 2nd, ther will be no trouble?
Thank you and Regards,
Tommaso

Hi,
If the configuration/versions (OS, DB and SAP version along with SPS) of both the systems is same then you need not worry.
Regards,
Nirmal.K

Similar Messages

My camera connection kit stopped working after I upgraded to ios5

My camera connection kit stopped working after I upgraded to ios5. If I plug it in to my iphone I get a message saying it is not recognised, but when I plug it into the ipad it does nothing at all. I've tried resetting it, but that makes no difference.
I have an ipad 1 which I bought because it had lots of storage. I'm going on holiday soon, and I want to be able to upload my holiday photos to my ipad while I'm away.
Any suggestions?

Actually this sounds the same problem I have on my iPad2.
I use a cheap copy of the CCK which I got off eBay.
It worked great when fitted with a 16gb SD card, but since I upgraded to 5.01 it has stopped working.
Sorry, no solution at this point but it worked on 4.3.3 but not on 5.01.
I'll keep on looking, was considering a proper CCK thinking the cheapmversion may be drawing too much current, but it sounds like that might not work either.

HT1688 I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?

I upgraded my Iphone 4s with the new operating system. After the upgrade was performed all my contacts were lost. How do I recover my phone contacts?

Synch them back from whatever contact manager or cloud service you stored them in.

Poor System performance after EHP4 upgrade

Hello Experts,
We have just finished our Upgrade to EHP4 for ECC6 system. After the upgrade we are noticing awfully slow system response time.
My SGEN is currently executing and it's showing another 45 hours before it is finished. Are there specific post Upgrade activities that I am missing? Once I try to perform some action it takes ages to compile the program. I undesratand that since SGEN is not run yet so it will need some time to compile and generate load for the application but still the response is takinng agaes before I see the actual Application/Program active in GUI.
Please suggest what I can do to boost up my system performance.
Thanks,
M

Hi Sunny,
Another Update
I looked at SAP Note 146289 - Parameter Recommendations for 64-Bit SAP Kernel
Following is the recommnedation:
Implement the SAP profile parameters as follows:
em/initial_size_MB 1024 up to 1TB (note 835474)
em/blocksize_KB 2048, 4096 or 8192 (note 835474)
ztta/roll_first 1
ztta/roll_area 6500000
The deafult value of the following parameters is 2000000000 (2GB).
They can be changed depending on the HW (RAM) and the configured
SWAP Space:
ztta/roll_extension 2000000000 (2GB)
abap/heap_area_dia 2000000000 (2GB)
abap/heap_area_nondia 2000000000 (2GB)
abap/heap_area_total 2000000000 (2GB)
But same SAP Note refers for windows:
For Windows 64Bit recommendations see note 88416:
As per this note recommendations are as follows:
Standard values for zero administration memory management
[HS] = size of the physical main memory
[PM] = value of the profile parameter PHYS_MEMSIZE (standard value=[HS])
[BE] = maximum possible number of users (calculated from [PM])
Profile parameter
Standard 32-bit
Standard 64-bit
Unit
em/initial_size_MB
    [PM]
    [PM]
Mbyte
---    em/max_size_MB
---    20000
---   100000
Mbyte
em/address_space_MB
    512
   4096
Mbyte
ztta/roll_first
    1
    1
Byte
---    ztta/roll_area
--- 2000000
--- 3000000
Byte
ztta/roll_extension
2000000000
2000000000
Byte
abap/heap_area_dia
2000000000
2000000000
Byte
abap/heap_area_nondia
2000000000
0
Byte
abap/heap_area_total
2000000000
[PM]*1048576
Byte
-    rdisp/ROLL_MAXFS
[BE] * 100
[BE] * 100
8KB Block
---    rdisp/ROLL_SHM
[BE] * 100
[BE] * 100
8KB Block
---    rdisp/PG_MAXFS
---    32768
---                          32768
8KB Block
    rdisp/PG_SHM
[BE] * 50
BE] * 50
8KB Block
PLease note that ours is a 64Bit kernel for WIndows 2003
x86_64
So is it ok to change the value of abap/heap_area_nondia ?
Thanks,
M

Why can NOT my apple TV connect to itune store after I upgraded it to ios 5.1(5201)?

I am in Singapore, and own this apple tv for a few days and everything were alway ok.
Today, I upgraded the ios to version 5.1(5201). After the upgrade process was done, the apple tv can not login to itune store.
I am a software engineer. I confirm that the network setting are fine and the username and password are correct, so I doubt it is server's problem.
Even when I "reset all setting", I can not activate my Apple TV.
Even more, I try to click "update software", and it said "it is unsuccessful ...". I remembered that it should inform me "the version is newest" before I "reset all setting".
So, I doubt it is because before the server serving Singapore has some problem now.
However, now I can not choose location to US or others, because after I upgraded, the location selection box is empty.
So, I have no idea.........

I check the internet connection status of my Apple TV, and got the result as
192.168.2.101     118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   17.154.66.38         TCP     www     Accepted
192.168.2.101   118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   17.154.66.38             TCP     www     Accepted
192.168.2.101   118.214.190.18     TCP     www     Accepted
192.168.2.101   118.214.190.17     TCP     www     Accepted
192.168.2.101   118.214.191.77     TCP     www     Accepted
192.168.2.101   118.214.191.54     TCP     www     Accepted
, where 192.168.2.101 is my Apple TV's ip.
And I also set up a DNS server and check which domains Apple TV queries, and found that
    ax.init.itunes.apple.com(118.214.190.17 118.214.190.18 118.214.191.54 118.214.191.77 all in Singapore)
    iphonesubmissions.apple.com(17.171.60.16)
    phobos.apple.com(17.154.66.38)
    mesu.apple.com(118.214.190.152)
And ip of ax.init.itunes.apple.com are all in Singapore.
I am doubt the iOS 6.0 (TV software 5.1(5201) ) has not been deploy to Singapore. Last time, I select location as US, so it informed me to update to iOS 6.0.

Issues connecting to License Server after ServerTools upgrade 8.8

Hi
To run a preUpgrade Check I needed to upgrade the ServerTools from 2007 to 8.8.
Since this upgrade I can not connect to the License Server anymore.
Does somebody have an idea what could be wrong? I removed and reinstalled it twice and I do have a new license file.
The upgrader also shows me the COMMON grayed out and I con not run the Check either. I assume this is for the same reason.
Thanks
Franz

Hi Franz,
After upgrading the server tools with the Upgrade Wizard, the License Server is not started automatically. This issue is documented in a SAP Note [1488839|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1488839]. In order to resolve this issue please start License Manager after the upgrade.
The 2nd issue (The upgrader also shows me the COMMON grayed out) is described in SAP Note [1433019|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1433019].
In order to resolve this issue please upgrade your environment either to 8.8 PL10 or to 8.8 PL12.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Color calibrate on two VDU's after lion upgrade

Hi,
I have just upgraded my Mac Pro from Snow Lepeord to Lion. All seems to have gone well after the 33min upgrade process completed.
Just noticed that my two identical BenQ HDMI attached monitors are showing different colours (colors) / apprearance. I have tried to change the setting in Display parameters, but although two calibrate windows appear, the right (primary desktop) screen is the only one affected by any changes, even if I try to change the left screen options box.
If I create a new calibration profile, no matter whether I select it on the left or the right screen, you can not independantly select a profile for an individual screen.
Seems to be a problem that has just come with Lion. Has anybody else seen similiar issues, and know a fix or work around?
Just ran the ColorSync application and it reports an error with the dfault BenQ profile
When I Verify:
Checking 60 profiles...
/Library/ColorSync/Profiles/Displays/BenQ V2400Eco-000009D1-0000-7D02-0000-544500000000.icc
   Tag 'cprt': Text tag has an incorrect length.
Verify done - found 1 bad profile.
When I Repair:
Searching for profiles...
Checking 60 profiles...
/Library/ColorSync/Profiles/Displays/BenQ V2400Eco-000009D1-0000-7D02-0000-544500000000.icc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.
Repair done - 0 out of 1 profiles fixed.
Dave

Doug, I have I Samsung SyncMaster 940BW that has been working fine on Lion until I moved the system. Now I Have four files that are non-repairable in the Color Sync Utility. I wish your file would repair my issue.
/Library/ColorSync/Profiles/Displays/Display-00004C2D-0000-0226-4841-31390000000 0.icc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.
/Library/ColorSync/Profiles/Displays/Display-756E6B6E-7669-7274-0000-000041DC9D0 1.icc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.
/Library/ColorSync/Profiles/Displays/SyncMaster-00004C2D-0000-0226-4841-31390000 0000.icc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.
/Library/ColorSync/Profiles/Displays/SyncMaster Calibrated.icc
   Tag 'cprt': Text tag has an incorrect length.
   The file is locked. Could not be fixed.
I have performed Disk Repair Permissions Numerous Times.
Chris

Imaps connections no longer working after ios5 upgrade

Hi
I upgraded my ipad to IOS5 today. After this, connections to our imaps mail server is failing:
Oct 12 18:39:14 umdgrb dovecot: imap-login: Disconnected (no auth attempts): rip=xxx.xx.xx.xx, lip=xxx.x.xx.x, TLS handshaking: SSL_accept() failed: error:1408F119:SSL routines:SSL3_GET_RECORD:decryption failed or bad record mac
Server runs debian 5.0.8 (dovecot v 1:1.2.15-7)
and ios 4.x device is still working fine.
Anyone have any ideas?

This is resolved. The dovecot SSL certs were a little old and generated with an
older openssl lib. We've regenerated and distributed new certificates and things are working
again. Seems support for some older SSL/x509 format has been dropped but the latest
version of openssl tools on the box generates updated formats by default.

Zone Base Forewall for VPN connections does not work after IOS upgrade

Hi all,
We use cisco router 2911 as corporate gateway - there is Zone Based Firewall implemented - I upgraded IOS to last version (15.2(2)T1) - originaly version 15.1(4)M1 - to solve issue with Anyconnect connections (bug CSCtx38806) but I found that after upgrade the VPN users are not able to communicate with sources in other zones.
More specific
WebVPN use this virtual template interface
interface Virtual-Template100
description Template for SSLVPN
ip unnumbered GigabitEthernet0/1.100
zone-member security INSIDE
There are other zones VOICE, LAB, ...
In the policy any connection is allowed (used inspection of icmp, tcp and udp) from INSIDE zone to VOICE or LAB zone
After VPN connection I am able to reach resources in INSIDE zone (which is the most important), but not in other zones. Before upgrade it worked.
Once I changed zone in Virtual-Template interface to VOICE, I was able to reach sources in VOICE zone but not in any other. I searched more and found the stateful firewall is not working for connections from VPN as ping is blocked by policy on returning way - it means by policy VOICE->INSIDE, once I allowed communication from "destination" zone to INSIDE zone - the connections started to work, but of cause it is not something I want to setup.
Does anybody has the same experiance?
Regards
Pavel

It seems to me I should add one importatant note - if client is connected directly in INSIDE zone, he can reach resources in other zones without any issue - so the problem is only when the client is connected by VPN - not in ZBF policy setup.
Pavel

I cannot connect to the Internet after Lion upgrade

I'm having a similar problem to some other threads. After upgrading to Lion I cannot access the Internet wirelessly through my Airport base station. All other Macs in the house are working fine. Per the other threads:
- I do not have Avast installed
- I have tried trashing the System Configuration in Preferences
- I have tried creating new locations
- I tried enabling "Auto Proxy Discovery" and "Automatic Proxy Configuration" in Network Preferences.
None of this has worked. Here is the message I get in Safari:
"The operation couldn't be completed. Operation not permitted." (NSPOSIXErrorDomain:1)
I previously was getting a kernel panic after startup when I did the upgrade. But I was able to narrow it down to Intego Content Barrier which I deleted. I then reinstalled Lion and the system seems stable. Just can't get the Internet to work.
Any other ideas or thoughts on this?
Thanks!
David

Don't think Airport is around in Lion
Select Advanced, pictures are in wrong order and I was tired of fighting with it.

"Connect to Server" SLOOOOW after Lion upgrade?

As the title says, since my Lion update it now takes up to 30 seconds to mount/connect to my local server (no changes to the server), whereas when my machines were running Tiger (2004 G5) and Snow Leopard (2011 MacBook Pro), it was a near instananeous connection.
What gives? Any tips??
Thanks!

I don't know what the ISP would have to do with it...
1. The initial connection lag was with local network access.
and
2, The problem only surfaced the minute I upgraded to Lion OS. Two different earlier OS's were fine. And a third user, likely running Snow Leopard reported no problems accessing the server over the internet (from a different ISP).
Seems pretty clear it's a Lion issue to me... somehow requiring IPv6 to do it's thang.
PS. I didn't mention this before, and I don't know what it has do with anything, but the server is an old G4 unit running Leopard.
At any rate, I woke up the computer this morning and was able to connect to the server instantly. So far so good...

Firefox will not load any internet pages on my Linux operating system computer after I upgraded firefox. Any suggestions?

I have a Linux operating system. I attempted to upgrade or update firefox and my mozilla will not load any internet pages. I am positive that I have the wireless connection connected. Any solution to help me get back on the internet?

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Check and tell if its working.

IPhoto won't connect to my cameras after Lion upgrade

After upgrading to Lion and iPhoto 11, none of my cameras are recognized by iPhoto and don't automatically open when connected. Need help!

No.
The problem seems that the cameras are not recognized on the USB port at all. I have three cameras that worked immediately before I upgraded to Lion and now none work -- meaning when I plug them into the USB port iPhoto does not recognize them.

HPC8180 Printer wont connect to wireless network, after firmware upgrade to Wireless Router

My HPC8180 has been connecting wirelessly since I bought it sometime ago. I recently had to upgrade the firmware on my Netcom NB9W wireless router and since then my HP wont resolve to the wireless network.
I run the Wireless Network wizzard on the printer, select the correct SSID and enter the WEP key as per instructions.
It then will not connect.
The summary I print out says it passes everything except:
No Filtering = Fail
Connected = Not Run
Signal Strength = Very Low (which is strange because it's about 10ft from Wireless Router).
Other networks detected matching your network name (SSID) = No
Summary says:
Network Name (SSID) altnet (correct)
IP Address = Not applicable
Configuration Source = Not applicable
Communication Mode = Infrastructure
Authentication Type = Open System
Encryption = 64-bit WEP
I have NOT turned on mac address filtering
Any ideas??
This question was solved.
View Solution.

Your router appears to be a DSL modem router. Those can be tricky to connect to. Also, WEP can be problematic and is no longer a good security measure. WEP can be broken in about 10 minutes with freeware from the internet.
Let's do three things:
1. Change to WPA or WPA2 encryption. You can make up your own password. Make it 13 or more characters, numbers and letters, upper and lower case.
2. Reset the Network Defaults in your printer (Setup > Network area).
3. Attach to the router in this way:
Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the device (Wireless Setup WIzard)
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank
- Finally, plug in the phone line, reboot the router and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Mac mini cannot connect Onkyo TX-SR806 after Lion upgrade

Hi,
I've bought the Mini in 2011 and connect via HDMI to an Onkyo TX-SR806. The Onkyo receiver does the connection to the TV. Everything was working fine until the Lion upgrade. Then the Monitor setting for the Onkyo vanished (sound is also dead). I can connect to my Samsung TV, but the sound is poor this way. I wrote an automator script to force the System settings check, but this makes the monitor flicker and go blank again. The recent Lion upgrade with the HDMI didn't improve the situation. Does anyone know about the problem?
Ciao, Gerald

Ive got a similar issue however i can connect but can't download on AppStore and iTunes i can connect but my download screen is frozen and its forcing me to download certain titles I've already downloaded!!!!!
useless

Connect two systems (CTS) after independent upgrade

Similar Messages

Maybe you are looking for