Connect via audio receiver

i am trying to hook up my apple tv 2 to my yamaha audio receiver via the HDMI jack so i can have the movies and audio play surround sound. has anyone done this and know how to get tv to find the source?

You would connect AppleTV to the Yamaha via HDMI then HDMI out from Yamaha to TV.
Alternativel connect AppleTV direct to TV with HDMI and use separate optical cable to Yamaha for audio.
AC

Similar Messages

Ipad Air unable to connect via Citrix Receiver

Hello,
Has anyone been having issues since the beginning of the week with regards to connecting via the Citrix Receiver App? I just get cannot connect, it does launch the applications briefly but then bombs out.
Tried factory reset and upgrading to 8.1 but still same issue.
Did notice Citrix updated their app on Monday.
Thanks,

usb is a digital serial bus it does not carry analog audio to be able to do what you wish a program would have to run on both devices and I doubt that 3th party programs can get access to the usb port in ios
your best bet is to connect the minijack audio out connector of the ios device to a minijack analog input port like line or mic in on the mac
if a such does not exist then you can get usb audio cards for the computer which would have a 3.5mm minijack line in

I have a 6thgen Nano, and all the recent songs I've purchased from iTunes wont play at normal volume when connected via audio cable. Can anyone help me figure out why?

This is a semi-new problem, ongoing for several months. I've purchased songs from iTunes before and they play just fine on my Nano when connected to an audio jack cable, but for some reason, anything downloaded in the last few months plays at an insanely low volume. Normally, if I hit the advance button on the Nano to skip to the next song I'll hear a split second of the song at normal volume, but that's it.
I've restored both the iPod and my iTunes (using a Dell laptop, Windows 7) multiple times but to no avail. The songs play fine in iTunes itself, but I've even noticed a decrease in volume when listening to the songs on headphones. I'm beyond frustrated with this as I can't find any support online in the Apple archives, and I can't listen to any of my new music without burning to disc. Any help would be greatly appreciated!!

I have, a couple different pairs, unfortunately, and still no change. TBH, the headphones don't bug me nearly as bad as the fact that I can't plug my iPod into a radio or speaker with an audio cable and hear my latest purchases. Drives me crazy that I can't listen to my tunes!

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

I receive a not connected to the internet message several times daily on my iMac connected via airport to a time capsule which accesses the internet via cable modem.. When I input my password to enter network preferences, the connection re-establishes.

I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

I am aware that iMacs do not support Blu-ray. However could I use am a Blu-ray player connected via the audio/optical digital in port to watch Blu-ray on my iMac screen ?

I am aware that iMacs donot support Blu-ray. However, could I use a blu-ray player connected via the audio/optical digital in port to watch blu-ray on my iMac screen ?

You could connect a FireWire Blu-Ray drive and use non-Apple player software.
<http://eshop.macsales.com/search/external+blu+ray>
<http://www.macblurayplayer.com>
<http://www.macblurayplayer.com/download.htm>
<http://www.mcetech.com/blu-ray/>

Why can't I use my mac as a WiFi extender if it is receiving it's internet connection via WiFi?

Now I'm not the most tech savvy person, but why is it I can't use my mac as a WiFi extender if it is getting its internet signal via WiFi? Would it mess up the original signal it's receiving?

You can do it.. but we do not recommend the use of a computer to do a task that a cheap router can handle better..
But what you need is a second wifi card. In a Mac there are a number of ways to achieve that.. without card slots .. USB wireless sticks that are Mac compatible is one way.
You set up the computer with ICS (internet connection sharing) just look it up.
You receive signal on whichever network you have .. Ethernet being hugely superior of course.. and then the computer can act as router/bridge to duplicate that connection via any other network connection it has.. on a Mac with thunderbolt.. you could use a second ethernet via adapter.. or wifi with USB stick etc.
However.. a cheap second hand Apple router will work far better doing the same wireless extend.. without requiring your computer to be on 24/7 for any other client to use.

My iphone 5s is connected via bluetooth with mercedes benz e class. I can make the calls and receive the calls but music of my phone can't be play via car music system so pleaase help.

My iphone 5 s is connected via bluetooth system with my car mercedes benz e class. I can make calls & receive calls but my phone music can't be play via car music system. The car muisc system can't find external devise if it is connected with i phone 5 s via bluetooth or via cable.

Hello parthivfromahmedabad,
Thanks for using Apple Support Communities.
To troubleshoot issues with car stereo bluetooth connections please follow the steps in the article below.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Take care,
Alex H.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

Does Time Capsule receive Wifi signal? or it must via connected via cable to a router?

Hi everyone,
I would like to know if the new Time Capsule 2TB receives wifi signal or if it must be connected via a cable to our router.
Thank you so much,
Regards

The recommended connection method would be to connect to your modem or router as Apple illustrates in the Time Capsule Setup Guide
However, if you already have another Apple router providing a wireless network, the Time Capsule can connect using wireless, and also "extend" the wireless signal from the main Apple router.

Hello, no audio if I connect via Thunderbolt via a cable to HDMI.

Hello,
I don't hear audio if I connect via Thunderbolt via a cable to HDMI interface. Does anyone encountered the same problem?
Thanks Henk Truijen:
[email protected]

Check the setting in the "Output" tab of "Sound" system preference.

Failing to connect via HDMI port on Marantz sr7002 AV receiver.

I tested the HDMI ports with other equipment and they work fine. The Apple TV works fine when connected directly to the TV, but I need the HDMI port on the TV to connect the AV receiver. I do get the sound from the automated voice ("please connect keyboard...., etc.) through the sound system, but no signal is reaching the TV when I connect the Apple TV to the AV receiver. I tried different HDMI ports, different cables, etc. Any suggestions would be greatly appreciated.

Hi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards

Can't connect apptv to my TV via Onkyo receiver

Hi guys ,
Here my problem
Case 1 : I connected my apptv to my Sony Tivi > everything work normaly
Case 2 : I connected my applv to Onkyo receiver , then from receiver to Tivi . And nothing happened , my tivi doesn't show anything
Case 3 : I connected my laptop to Onkyo receiver , then from receiver to Tivi , it look like working normal
have a problem with my connection from applv to receiver , anyone know , help me plz !
I'm trying to setting "menu assign" on my receiver but it not work . My appletv connect to receiver at HDMI 1 and i've assigned HDMI 1 in my receiver
P/S : Sorry about my bad English , i'm Vietnamese and i'm not good at English

What model receiver?
I have an Onkyo TX-SR313 and have the HDMI from the Apple TV going to one of the HDMi ports on the receiver and the HDMI out from the receiver to the TV and it all works OK. In addition I have a DVD player and a ROKU stick connected to two other HDMI ports on the receiver and they all work as expected.
How do you have the laptop connected to the receiver?

Restart after Audio Receiver is shut off

Every time I shut off my Audio Receiver (Apple TV is connected to it via HDMI) I have to rest Apple TV the next time I turn it on. Any suggestions

http://discussions.apple.com/thread.jspa?threadID=2215648&tstart=0

Connect via audio receiver

Similar Messages

Maybe you are looking for