Connect via RDP option is not enabled for some VM's on the same Hyper-V Host

Hi. I have many virtual machines on a Hyper-V host being managed via System Center Virtual Machine Manager 2012.  When you right click on a virtual machine - Connect or View - Connect via Console is enabled, but Connect via RDP is not enabled for
most but not all of the machines.  Is there a setting on the Hyper-V host that I need to modify to enable Connect via RDP for all of my VM's?  All of the virtual machines have the same configuration meaning that Remote Desktop is enabled for all
of them on the OS itself.

Hi Debabrata,
In App Controller the console access is provided by an ActiveX control and this requires the client (web browser) to connect directly to the Hyper-V server. As you note, for this to work over the internet would require the Hyper-V host to be accessible from
the internet, and this is not a recommended security practice. 
Publishing App Controller as a Remote App avoids needing to make the Hyper-V host accessible to the internet. I'm not an expert in setting up Remote App and don't have an answer about how to avoid doing 2 lots of authentication. The
Remote Desktop Services forum is likely to be a better place to ask a question on setting up Remote Apps.
Let me know what you need help with for the Remote Console in Windows Azure Pack option. There is also a forum for
Azure Pack and two of our MVPs who do have console connect working have both written articles that describe their experience.
http://kristiannese.blogspot.com/2014/02/configuring-remote-console-for-windows.html
http://www.hyper-v.nu/archives/mvaneijk/2014/01/windows-azure-pack-remote-console-with-the-rd-gateway-in-a-dmz/
Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

  • The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.   I'm looking for a possibility to use the iPad for photography while traveling, without

    the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
    I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
    Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
    my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
    any suggestions?

    Check out pogo plug device, it allows you to upload camera roll via wifi.

  • Azure VM does not connect via RDP after restart

    I have restarted my VM running Windows Server 2012 from Windows Azure Portal. After restart it is unable to connect via RDP, although I can connect to it via FTP I had created already. I have ticketed the issue at Windows Azure Support but no reply in past
    2 hours.
    Any help please?

    Hi,
    What is the error message you are getting ?
    Please check this
    document that might help which talks about How to troubleshoot common RDP issues for Windows Virtual Machines in Azure .
    Regards,
    Shirisha Paderu

  • The stack sub menu does not enable for stacked photos in elements organizer 13 on windows 8.1

    The stack sub menu does not enable for stacked photos in elements organizer 13 on windows 8.1.
    Has anyone else experienced this?
    I stacked some photos, now I cannot expand them or unstack them in the organizer.
    This is for both auto and manual stacking.

    Please press Ctrl+D to move to the older grid and now the stack option should be enabled.
    Thanks,
    Anwesha

  • Calendaring not enabled for all users

    OK, I am sure I have overlooked something, but why do some of my user have Calendaring enabled when I look at End User Information on the CUPS Server and some do not? All users are setup with the same profiles. But I can't find where to enable it for the other users.
    Thanks in advance,
    Doug

    Calendaring is enabled by the end user-
    In CUPC
    File>Preserences>Status>Show me as "in a Meeting"
    In CCMUSER Options
    https://CUPSSERVER:8443/ccmuser/showHome.do
    User Options>Preferences>Calendar Settings
    I'm not sure if there is a way to do it from the Admin side....

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • If for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar.  My question is, I do not have this option. How do I get the sync to stop

    "if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
    I do not have the option box to "show status in menu bar"
    I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
    Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical  pop-up every 2 hours. I cannot find how to stop it.
    Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
    Can anyone out there help me please. 

    "if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
    I do not have the option box to "show status in menu bar"
    I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
    Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical  pop-up every 2 hours. I cannot find how to stop it.
    Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
    Can anyone out there help me please. 

  • Why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?

    Hi All,
    Does anyone know why SLFM is not enabled for Macbook 13" Aluminum late 2008 model?
    I just found this out after I installed bootcamp and Windows 7 on my Macbook 13" with P8600 2.4Ghz CPU 2GB RAM and 250G HDD after more than a year of using it.
    After I installed the CPU monitoring widget on Windows 7 and CPUZ, I noticed that the lowest Freq that my Macbook operates even with <5% CPU load is only 1.5Ghz and VID @1.0V.
    I installed Coolbook on OSX to confirm what I saw on Windows. I was surprised that SLFM is not visible in Coolbook which is the same result I got from Windows 7 CPU monitoring widget and CPUZ.
    I checked with our local Mac support and they got the same results for all of Macbook 13" Aluminums late 2008 model. SLFM is not visible on Coolbook which means, it is not enabled.
    I tried to install Coolbook on my wife's Macbook Pro 13" 2010, which has the same spec, P8600 2.4Ghz CPU and 250G HDD. The only difference is the memory which is 4GB RAM. There, SLFM is enabled and works just fine, running at 798Mhz @0.875V.
    Can anyone please help confirm if this is really the case for Macbook 13" late 2008 model?
    Because I checked the Intel P8600 Datasheet and SLFM should always be enabled. Otherwise, it will affect battery life as well as long term reliability of the CPU.
    I would appreciate if the Macbook and Macbook Pro owners in this forum can help confirm using Coolbook the status of SLFM in your own Macbooks. You may use any other tool in checking the SLFM and share it with us if you believe it is more reliable and better than Coolbook. Thanks.
    Message was edited by: jespada

    BTW, Here is what I got from Coolbook for comparison. As you can see the late 2008 Macbook has no SLFM info.
    Legend:
    SLFM - Super Low Freq Mode
    LFM - Low Freq Mode
    HFM GV - High Freq Mode (Geyserville/Speedstep)
    HFM - High Freq Mode
    Macbook 13" Aluminum late 2008 P8600 2.4Ghz 2GB RAM 250GB HDD
    Freq VID
    SLFM -- --
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Macbook Pro 13" Aluminum 2010 P8600 2.4Ghz 4GB RAM 250GB HDD
    Freq VID
    SLFM 798Mhz 0.8750V
    LFM 1596Mhz 1.0000V
    HFM GV2 1862Mhz 1.0500V
    HFM GV1 2128Mhz 1.1000V
    HFM 2394Mhz 1.1375V
    Message was edited by: jespada
    Message was edited by: jespada

  • ACL is not enabled for this user  OSX 10.5

    I am running OS X 10.5 on a Mini Mac.
    It was a clean install, everything went smoothly except for configuring the mail server.
    I created my users as I normally do using Workgroup manager.
    However 2 out of 3 of users I created can not log into the IMAP server.
    You get the error message ACL is not enabled for this user.
    What is the ACL and how do I enable it ?
    Thanks
    Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22607]: badlogin from: [192.168.15.101]. plaintext user: friverr. service ACL is not enabled for this user
    Nov 9 18:38:12 ns1-2 imap[22604]: badlogin from: [192.168.15.101]. plaintext user: herbs. service ACL is not enabled for this user

    Hi there
    I had the same problem and I found this post which fixed it:
    http://discussions.apple.com/thread.jspa?threadID=1244694&tstart=0
    Hope it works for you too!
    Chris

  • BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

  • Icq on Blackberry "Service not enabled for this handheld"

    Every time I try to login to icq on my blackberry it gives me an error that says "Service not enabled for this handheld".  I called Sprint whom my service is through and they told me that everything is enabled for messaging programs on my account.  Does anyone know how I can get this working?  My blackberry is an 8830 world edition.
    Message Edited by harley9 on 03-03-2009 03:31 PM

    Reminder to remain courteous and on topic. Thanks

  • Thousands of "mail is not enabled for this user"

    Someone is sending my domain email to thousands of non existent mail accounts. It's like they are combining every possible prefix to my domain they know of. It's been going on for weeks. The Mail service, however, is not being brought down by this at all. So I don't know what kind of attack this is or how to stop it.
    Can someone help me? Below is a minute section of my System log:
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    Dec 31 15:08:55 nameserver lmtpunix[19165]: warning: unable to post message for user: [email protected], mail is not enabled for this user
    ------------------

    Two possibilities - both fall under the heading 'reconaissance by e-mail'. A spammer or hacker will try 1000's of common names, then look at which ones didn't bounce to determine which ones have accounts on your system.
    They then have a comprehensive list of account names on your server, and can proceed to attempt likely passwords for each, or send endless spam to your users. Either one is a Bad Thing, doubly so if you've got any accounts that you created just to test things, and have weak passwords, but you've always counted on nobody knowing they exist.
    At one point, I actually had a 'testuser' account that had 'testuser' as the password - I just hadn't remembered to delete it after I was done testing. It's very common for a system to have a couple of these hanging around. I didn't have trouble with it, but looking for and getting rid of these is critical.
    Either way, the immdiate solution is to go Server Admin->Mail->Settings->Relay, and add the IP address(es) of the senders to the 'Refuse all messages from these hosts or networks' section. Mail attempts will still show up in your SMTP log, but they'll look like this one I got this morning (one of dozens):
    Jan 3 11:07:33 miniserver postfix/smtpd[1440]: NOQUEUE: reject: RCPT from unknown[66.180.115.17]: 554 <unknown[66.180.115.17]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<xptwfs.gov>
    Next is to take a look at your password policies - if you've got strong password policies (must include characters and numbers, must be 7 characters or longer, etc., you're probably OK, but if anyone has weak passwords, or god forbid, uses their userid as their password, you're pretty vulnerable.
    It's also worth noting that someone with a full list of your users has a fair number of tools for improved odds of phishing, or spear-phishing, where they create finely targeted mails that say things like 'Bob Smith told me to contact you for your password', and look very real. A warning mail to your users to remind them that they need to keep passwords secret, and be cautious about mail, even if it appears to know something about them, would be good. I wouldn't specify that you've been recon'd, just a general 'New Year Security Reminder' or some such.
    Hope this helps!

  • Service not enabled for this handheld.

    I have downloaded yahoo messenger for my BB curve 8310, but when I go to log in it says that the service is not enabled for this handheld.  How do I enable it?
    thanks!!

    Please check with your carrier whether your carrier or your region supports yahoo access.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

    This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
    I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

    I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

  • HT3529 the MMs option is not enabled... I am unable to click on that option...

    the MMs option is not enabled... I am unable to click on that option...

    Who is your carrier?  Your carrier may not support this.

Maybe you are looking for

  • How to connect apple tv to my iPad

    Can some one help me to connect my iPad to my apple TV?

  • DBMS_XMLGEN, Carriage Returns XSLT to HTML

    Hi, I am facing an issue using the DBMS_XMLGEN. I have written a function (see under) that receive A SYS_REFCURSOR and return as a CLOB the XML with eventually transformed using a CLOB containing the passed XSLT code. The goal is to reuse several tim

  • Unable to create index ..can anyone help me

    Dan, I have created the following table and the values are as following, create table zonetemp( name varchar2(15), SHAPE MDSYS.SDO_GEOMETRY) insert into zonetemp values('Raju', MDSYS.SDO_GEOMETRY(2003,null,null, MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3), M

  • HDMI input from camera to computer

    Hi, Is there a laptop or laptop card that takes the HDMI video / audio from a camcorder (Sony HXR-MC2000U) to stream using FMLE?  Will this be an HD signal?  Pointy haired boss insists we equip laptop to stream live HD video, audio through our stream

  • VM doesnt boot after expanding VHD

    Hi, I am running Win2008 R2 HyperV and i was running a VM with a VHD. I expanded 50 GB disk to 80 GB after expanding the VM boots into repair mode and when i click command prompt it goes to x: drive but i can't see C: drive. what are the options to r