Connect Window Appears While Running Report From Forms 6i
Hi.
I have a problem ie. Using Oracle Server 8.0.5 In the parameter file when I use RESOURCE_LIMIT=TRUE Then
Every time When report runs from Forms 6 It displays conection Window. But When RESOURCE_LIMIT=FALSE It does not appears.
How to Control this while Using RESOURCE_LIMIT=TRUE
Thans In advance.
Shahzad
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by the oracle reports team:
hello,
there are no known issues with reports and this setting. did you check your database ? maybe there is a problem on the database side or you have defined limits that would cause call to report to initiate a new session.
i would suggest you open a TAR with oracle support services in this matter.
regards,
the oracle reports team<HR></BLOCKQUOTE>
Though I'm not aware that I use this setting, I also have a similar problem with Reports6.0. Randomly, while running a report from a Form using the RUN PRODUCT built-in, I see the database logon Form! Would looding my connection while the report was running cause this same thing?
Similar Messages
-
FRM-92101 error while running report from form
HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arifhi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN -
Error while running report from Form. i am using Forms 10g.
dear all,
here is a problem when running the report from a fom. gives the pollowing error.
REP-110: Unable to open file 'f:\oracle\accano\gl\coa_list.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'f:\oracle\accano\gl\coa_list.rdf'.
i am using Forms 10g.
thanks
Muhammad NadeemSee metalink doc id 215469.1
The purpose of this document is to:
- provide information on how to resolve the REP-110 error.
- give hints on how to troubleshoot problem.
- include a comprehensive summary of various scenarios which may
result in a REP-110 error -
hi,
I am having problems in running report from form.
I am using oracle 9i on windows 2000 server and no 9iAS at the moment. On client side, i have windows xp and 9iDS installed. I want to run report from forms in 9iDS testing environment.
my forms are running ok but now i need to run report. so what i have done is that i have created a report object in form and following are enteries present in it at the moment.
Name REPORT7
FileName D:\Projects\IBMR\forms\soil_water_quality_data.rdf
Execution Mode Batch
Communication Mode Synchronous
Destination Type Cache
Report Server 9irep
and in when_button_pressed trigger
DECLARE
Report_Id REPORT_OBJECT;
Report_Job_Id VARCHAR2(20);
Report_Status VARCHAR2(80);
Report_Svr VARCHAR2(20);
BEGIN
Report_Id := FIND_REPORT_OBJECT('REPORT7');
Report_Svr := '9irep';
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_FILENAME, '\projects\ibmr\forms\soil_water_quality_data.rdf');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_OTHER, 'paramform=no');
Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
WHILE Report_Status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
END LOOP;
IF Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(Report_job_id,instr(Report_Job_Id,'_',-1)+1)||'?'||'server=9irep','_blank');
else
message ('report server failed with error message '||report_status);
END IF;
END;
i have installed report server with following command
rwserver -install 9irep
i have changed entry in rwservlet.properties like
SINGLESIGNON=NO and i have removed the following entire block of 9irep.conf, which i have read from some documentation
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</security-->
i get the following error message when i run my form
frm-41214 Unable to run report
and then next message is
frm-41217 unable to get report job status
i debugged the report id and it is
9irep_0
returned by Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
When I checked the Report Queue Manager
it is showing status like
(9irep)Terminated with error
and detail it shows is
Unable to connect to the specified database.
Now I am wondering what to do next.
any suggestions???????Hello,
From your description, it seems like the report is faling due to a database authentication problem. When you run your report from Forms, Forms internally passes the its database connection information to Reports automatically. So ensure that you are connected to a valid database in Forms, before the report is called.
Please verify whether a simple report which does not require a database connection, for example, a report containing only a boilerplate text object, is running correctly. Also, in the trigger code that you have specified, you should add the following:
SET_REPORT_OBJECT_PROPERTY(Report_Id, REPORT_DESTYPE, CACHE);
so that the report output gets generated to the server cache, and can be retrieved using rwservlet/getjobid.
Thanks,
The Oracle Reports Team. -
hi all,
i have tried to run report from forms using below codig(got from online help)
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
v_host varchar2(100):= 'localhost';
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
repid := find_report_object('REPORT27');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
copy_report_object_output(v_rep,'E:/Rep/local1.pdf');
-- host('MOZILLA E:/Rep/local.pdf');
-- WEB.SHOW_DOCUMENT('http://192.168.0.160:1521/reports/rwservlet/getjobid'||
-- substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
else
message('Error when running report.');
end if;
-- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
v_port := '8889';
ELSE
v_port := '8889';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=repserver';
v_parameter_string := v_parameter_string||'&report= E:\AGE_NoELIGIBLEReport.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
REP-110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
but i hav report in e:\ then why its getting?Hi,
I suggest you not to use the "E:\" directory letter, but the REPORTS_PATH instead.
<p>
from the Online Help
</p>
<p>
On Windows, edit environment variables through the Registry Editor (Start > Run > Regedit).
</p>
<p>
On UNIX, edit environment variables by revising and running the shell script that defines the initial default values (reports.sh). If you do this, be sure to keep a backup of the original, unaltered reports.sh file.
</p>
<p>
Regards
JeanYves
</p> -
Running reports from forms on the web
On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null -
When run report from form(6i) on the web,error FRM-921000
While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
nullI am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null -
hi all,
I am working in oracle forms 6i and i am trying to run report from
form while press one of the push-button. works fine upto 2nd line from the
begin key-word.After that its showing error like " FRM-40738:Argument 1 to builtin
REPORT_OBJECT_STATUS cannot be null.". Can any-one help me of how to solve this and
wat would be the problem.........?
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Please help asup!
regards,
jamehi rosario,
Thanks for ur reply. My requirement is, I want to generate pdf file from the report output. so i wrote the following code which is taken from d2k documentation. Problem area has been highlighted in bold.
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Report is running but while coming to report_object_status. complior shows error like "FRM-40738:Argument 1 to builtin REPORT_OBJECT_STATUS cannot be null". Parameter for report_object_status is null, i dont know y it is null because report is running. If report is running means,then there must be some values in run_rep.
why complior doesnt find the values from run_rep.......???
regards,
jame -
Parameter form display while calling reports from form
Dear All,
I am running reports from form using run_report_object. I do not want to see parameter form while running the report. How do I do that.
Thanks in Advance
Gaurav ShahHi, try to set paramform=NO in your parameter list
Daniel -
I want to run report from FORM
I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6iDECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END; -
OAS in Unix: URL not found when run report from Form???? please help
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
nullplease check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null -
I've interview tomorrow , still do not know how to run report from forms
hi all ,
i asked before about running report from forms 10g rel2 , but vainly , because i could not configure the reports server ,
and no one told me .
now i've an interview tomorrow , and sure it will be included in the task which i have to do .
i am in a bad need for your step by step help
thanks in advanceExcuse me for being lazy and not searching your previous threads containing questions about configuring your reports server. As I don't know their content I don't know the links posted, the advices given and what you did, and as this is a new thread I'll go ahead and ask what you tried, where you failed and what exactly did not work out for you.
i am in a bad need for your step by step help Fine, here is an easy one:
Step 1: go to http://tahiti.oracle.com
Step 2: click on "Oracle Application Server, 10g Release 2 (10.1.2)"
Step 3: click in the searchbox, type "Configuring Reports Server"
Step 4: click "search"
Step 5: You will be redirected to some links, the very fist of them is this:http://docs.oracle.com/cd/B14099_19/bi.1012/b14048/pbr_conf.htm
This is as step-by-step as it gets, if you want detailed help ask detailed questions.
cheers -
How to run report from forms 6i
i want to run report from forms 6i.
can anyone help me in this regard.
asif iqbal
karachi.hi
try something like this.
parameter_list_id := CREATE_PARAMETER_LIST('temp_data');
mywhere:='where 1=1';
if :RESULT_VALUE is not null then
mywhere:=mywhere || ' and diagnosis like ''%'||:RESULT_VALUE||'%''';
end if;
if :HISTORY is not null then
mywhere:=mywhere || ' and histodesc like ''%'||:HISTORY||'%''';
end if;
if :RCOMMENTS is not null then
mywhere:=mywhere || ' and scomments like ''%'||:RCOMMENTS||'%''';
end if;
if :PATHOLOGIST is not null then
mywhere:=mywhere || ' and PATHOLOGISTS like ''%'||:PATHOLOGIST||'%''';
end if;
mywhere:=TRANSLATE(mywhere,' ','~');
ADD_PARAMETER(parameter_list_id,'MYWHERE',TEXT_PARAMETER,mywhere);
RUN_PRODUCT(REPORTS,'C:\SearchResult.RDF',SYNCHRONOUS,RUNTIME,FILESYSTEM,parameter_list_id,NULL);
ADD_PARAMETER(parameter_list_id,'PARAMFORM',TEXT_PARAMETER,'NO');
DESTROY_PARAMETER_LIST(parameter_list_id);and also u can try the following code please modify it with u r requirements.
declare
v_plist_id paramlist;
pl_name varchar2(50) := 'rep_params';
begin
v_plist_id := get_parameter_list(pl_name);
check_param_list (pl_name); --Check availability of paramlist and
destroy is present
--When the parameter list already exists it needs to be distroyed first
if not id_null(v_plist_id) then
destroy_parameter_list(v_plist_id);
end if;
v_plist_id := create_parameter_list(pl_name);
add_parameter(v_plist_id, 'P_1', text_parameter, :block_name.item);
-- input parameter
add_parameter(v_plist_id, 'PARAMFORM', text_parameter, 'NO'); --
suppress the display of the Reports p-form
add_parameter(v_plist_id, 'DESTYPE', text_parameter,
:control.dest_type); -- set file destination type
add_parameter(v_plist_id, 'DESNAME', text_parameter,
:control.dest_name); -- set file destination name
add_parameter(v_plist_id, 'DESFORMAT', text_parameter,
:control.dest_format); -- set file destination format
-- call reports
run_product(reports, 'reports_file', asynchronous, runtime,
filesystem, v_plist_id, null);
end;sarah -
Oracle 10g Developer suite
using OC4J
hi experts
can you please share some code here to run report from form with and without passing parameters.
regardsTry This
Declare
v_connect VARCHAR2 (200) := 'userid=nisadmin/nisadmin@abc';
v_report_name VARCHAR2(100) := 'Voucher.rdf';
v_format VARCHAR2(12) :='Htmlcss';
Begin
Web.Show_Document('http://hoitvoltes5:9002/reports/rwservlet?'||v_connect||'&server=ReportsServer_HOITVOLTES5_asin&destype=cache&report='||v_report_name||'&desformat='||v_format||'&companyid='||:voucher.companyid||'&vouno='||:voucher.vouno,'_blank');
End; -
FRM-92101 error while running report from a button or menu
Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
ArifHello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif
Maybe you are looking for
-
Report generation fails with below error
Hi Friends, This is an extarct from "ccat /var/opt/SUNWsymon/PRM/log/prm.log" Report generation fails for individual host but succeeds for all hosts. prmlog September 13, 2010 12:52:14 PM Thread-287: Begin loading files prmlog September 13, 2010 12:5
-
I have a canon 70d. My CS4 photoshop will not read the camera raw file. Help!!
-
How do you filter out moving objects in a movie?
Hello! I'v searched the internet for solutions to this but I cann't find any. Im prittie new and I need to make a house on fire while two guys (one is me) will be walking away from it, towards the camera. I want to filter out these two guys and only
-
User Exit/ Enahancement/BADI in the sales order creation process
Hi, We have an EDI process for creating a sales order, we want to change one of the partners on some of the lines according to the document type, We know how to do it using the MV45AFZZ user exits but we want to do it using a BADI or an Enhancement,
-
Help please! music gone!
so i open itunes and there is nothing there. nada. idk what happened but all my music and apps and videos disappeared. so i went into my itunes folder and it has 2 files. "itunes library" (which is now like 200 kb cuz its empty), and "itunes library