Connect wirelessly the playbook to a printer

Hello
Is it possible to connect wirelessly the playbook to a wireless printer (HP for example)?
thanks
Mya
Solved!
Go to Solution.

There is a free app in App World called print tool. u copy and paste. Other than that no. hopefully a 3rd party developer will create one.
Be a Shepard and not an iSheep.

Similar Messages

I just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!

Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right.

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers

I have a new lion server and 4 lion laptops. The laptops loose connection to the shared documents and printers from the server after roughly 1 hour. By disconnecting and re-connecting wireless the connection is regained to shares and printers. We can still surf the web when it goes down.

Ok 1st one. The warning restriction message relates to this line in main.cf:
smtpd_helo_restrictions = permit_sasl_authenticated permit_mynetworks check_helo_access hash:/etc/postfix/helo_access reject_non_fqdn_hostname reject_invalid_hostname permit reject_invalid_helo_hostname
The last reject occurs after the single word "permit" and is ignored.
However, that's not the problem.
I'm not exactly sure what's happening, but this might be a clue.
It would appear that either postfix is not being able to create the socket for private/policy or it's somehow created with the wrong permissions. You might need to ramp up the debug level to get a better idea.
You could check if it's being created by "netstat -a | grep private/policy" in terminal.
My guess is that it's not being created because there is no setup statement in your master.cf file, but I don't understand why postfix would be looking for it if it isn't set up. Private/policy I think relates to grey listing. Maybe gives you a hint.

Connecting wirelessly to a office copier/ printer

I am trying to connect wirelessly to the multifunction copier/ printer at work. I would like to be able to send files to my mailbox that is stored on the printer side of the machine. I am connected to my job's staff wireless internet. However, I have no idea where to even start... Please help!

Hi!
A couple of things to figure out...
1.) Is the printer you're trying to access on the same network you're currently connected to in the office? Reason I ask, some offices have one subnet for WiFi and another subnet for Ethernet (for security reasons).
2.) If so, what type of printer is it? You may require printer drivers for that specific unit to be installed onto your computer.
3.) If so, what is the IP address of the printer? Does it support Bonjour network services?
You can connect to a printer over a network, typically by adding it via the default browser. The default browser is accessible via the "Add a Printer" dialog box which is selected within "Print & Fax" via System Preferences.

8900 froze while connecting to the Playbook

I was setting up the Playbook bridge when my 8900 was looking to connect it locked up.
I did the soft boot which took me to the BB logo with the progress meter which stops about 75%. I pulled the battery and replaced it after 5 minutes but it did the same.
I pulled the battery and connected the BB to my laptop but it can't connect and only shows the no battery logo on the 8900.
Obviously the Bridge software has corrupted the OS. How do you reset the OS?
thanks

Hello GarryDodman and welcome to the BlackBerry Support Community Forums.
To reinstall your BlackBerry device software, go to your mobile carrier's download site (click here) and install it to your computer. Follow the steps in KB11320 to reinstall it. Try to back up your device first before going through the reload process.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

New router unable to connect wirelessly to C4380 that had printed wirelessly with prior router.

My Verizon router was replaced. Have not been able to re-establish the wireless printing connection with C4380(DED3F7). Frustrated! BBlaine

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

I have Uverse 5031NV and am trying to connect wireless HP 4620 printer.

I have the UVerse 5031NV router. When I follow the setup instructions to set up HP 4620 printer, it can either set up by push button, or PIN. I don't know where the WPS button is on the router, nor how to input the given PIN from the printer. Or is there another way to connect wirelessly the printer to router?

Hi IKnowIndigo,
There are a few possible causes of the error. Generally speaking, you want to confirm that the network IP Address settings, Send Function Setting Tool activation, and Send-to-Email settings are all configured properly.
Please note that if in an office setting, we recommend that your IT Department/Network Administrator setup your scanning to email feature because we will not know information like your port numbers and so on.
However, whether your laser product is an office setting or setup on a personal network of your own, it is recommended to contact our technical support group to isolate the cause. At that time, it will be helpful to have initial information such as your operating system and version; if you have an on site e-mail server such as an MS Exchange server or a Domino server; or, if you are using an off-site email server such as Yahoo or Gmail.
Please feel free to contact us and we will be glad to help.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Blackberry desktop software cannot communicate with the connected device for the playbook

Hey whats up..... I'm new to the playbook and I'm having serious problems trying to connect my playbook with the blackberry desktop software. when i tried connecting it, a small windows popped up, saying "blackberry desktop software cannot communicate with the connected device.............. and if error to update". So i did. I'd already backed up the playbook the day before so it was ok when the small windows said, "all data would be remove and playbook would return to factory settings". I did all the procedures and the blackberry desktop software still wont connect to the playbook. I tried uninstalling the blackberry desktop software and re-installing it, but the same thing keep on showing up. So i cant access my playbook.
Can someone plz help me????????
PS... My Playbook is on OS 2.1.0.1088 and is 16GB
I tried the updating method 5 times now and uninstalling and reinstalling the blackberry desktop software 7 twice. I dont know what else to do, and also Is there another way i cant access the playbook?
Solved!
Go to Solution.

Try this:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB26904&sliceId=2&cmd=displayKC&d...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

HT4061 Got new router my samsung galaxy will connect to my printer and eprint but Ipad won't connect keep saying connect to the same network this ipad connected before but now it won't

I had upgrade of new router my samsung galaxy can connect to my printer and eprint but my ipad won't it says connect to the same network my printer is hp deskjet 3550A printer my ipad connected to my last router

Hi Pvclayton,
If you are having issues with AirPrint on your iPad, you may find the following article helpful:
Apple Support: AirPrint Basics
http://support.apple.com/kb/HT4356
Regards,
- Brenden

No connection with the internet

Since two or three weeks i have no connection to the internet. The app works with mobile internet but doesn't work with w lan. I have uninstall und reinstall the app, but it doesn't fixed the problem.Phone: htc one Android Version: 5.0.2 Spotify Version: 3.3.0.988

gv wrote: You should open a command prompt window on the laptop while it is connected to the router and can print but cannot access the internet. Enter "ipconfig /all". Also enter "netstat -rn". Post the full output into your next post.
It took a while before I found the time to go to my neighbours and check this but here are the results:
IPConfig - Netstat
Sorry that these are in Dutch, you guys probably know these settings anyway, if not let me know and I'll translate.
castor wrote: Connect the computer directly to router. Open routers set up page.
I plugged a cable from the laptop to the router. Normally it is wireless so basically I wired it. However, I was not able to access the routers admin section this way (or any internet pages for that matter). When I plug the internet cable that leads into the router (the one the ISPs signal comes in on) I can access the internet AND the router. I guess that I can access the router wireless, because there's no cabled connection in this situation..
Click status check the Ip address under internet …..if got a valid public Ip try going online .
When I access the status panel this way, I get an empty IP, gateway etc (0.0.0.0), probably because the router doesn't have the internet cable plugged in (that one's in the laptop).
if not click on set up...look for “mac address clone”….enable the service & click clone….click save settings....Do power cycle & see whether it is working or not....
This didn't really do much in this case. I presume "do power cycle" means pulling the power out and plugging the power back in?
If it helps any more, the laptop says it has a perfect wireless signal. But I'm fairly sure that that's always the case and it just goes wrong in the router itself. I hope this helps, if there's any more, let me know.

No connection to the internet with WRT54GL

Hi,
I have recently succesfully installed a WRT54GL router for my neighbours. Everything worked fine, however recently they asked me to install a small print server (Conceptronic > here), which I installed as well. Funny thing is that a few days later I received a call saying that their internet wasn't working anymore. I went to investigate and everything in the router seemed like it was set the way it should.
If I print from a wireless connected laptop to the printer (via the router and print server) it actually prints the page. But if I try to open a webpage, it simply wont load. If I plug the internet cable directly into the laptop instead of the router, the internet works, so it's not a problem with their ISP. I guess it's somewhere in the router being influenced by that printserver thing, or maybe something just got screwed up because of said print server.
Does anyone have any idea what I could try to do to fix this?
Cheers,
-DeV

gv wrote: You should open a command prompt window on the laptop while it is connected to the router and can print but cannot access the internet. Enter "ipconfig /all". Also enter "netstat -rn". Post the full output into your next post.
It took a while before I found the time to go to my neighbours and check this but here are the results:
IPConfig - Netstat
Sorry that these are in Dutch, you guys probably know these settings anyway, if not let me know and I'll translate.
castor wrote: Connect the computer directly to router. Open routers set up page.
I plugged a cable from the laptop to the router. Normally it is wireless so basically I wired it. However, I was not able to access the routers admin section this way (or any internet pages for that matter). When I plug the internet cable that leads into the router (the one the ISPs signal comes in on) I can access the internet AND the router. I guess that I can access the router wireless, because there's no cabled connection in this situation..
Click status check the Ip address under internet …..if got a valid public Ip try going online .
When I access the status panel this way, I get an empty IP, gateway etc (0.0.0.0), probably because the router doesn't have the internet cable plugged in (that one's in the laptop).
if not click on set up...look for “mac address clone”….enable the service & click clone….click save settings....Do power cycle & see whether it is working or not....
This didn't really do much in this case. I presume "do power cycle" means pulling the power out and plugging the power back in?
If it helps any more, the laptop says it has a perfect wireless signal. But I'm fairly sure that that's always the case and it just goes wrong in the router itself. I hope this helps, if there's any more, let me know.

Getting POP3 Accounts to Connect to Native Playbook Email.

My e-mail accounts which are hosted at namespro.ca will not connect with the Playbook Native e-mail client.
I have setup my Gmail account and it works fine.
The Namespro accounts need port 110 no SSL for incoming and port 2525 no SSL for outgoing. It also needs to have Outgoing Authentication = ON but the Playbook doesn't offer this option and Secure Logon = Off but the Playbook doesn't offer this option either.
Strange thing is it has downloaded some messages but then it keeps getting 'Can not connect with server" messages. Now it gets the error message all the time.
I also don't see an Option to tell the Playbook to leave the e-mail on the server. Some say they do have that option. Is that option available?
Dan

DrDan18 wrote:
I also don't see an Option to tell the Playbook to leave the e-mail on the server. Some say they do have that option. Is that option available?
Dan
Playbook email app synchronises with web mail, think of it as a remote webmail access app. That means if you delete a mail in playbook it deletes it in webmail.
Any option to "Leave on server" when POP mail is accessed my an email client is usually an option in the webmail account. There is no option in Playbook for that.
Can't help with the namespro.ca problem.
EDIT: Have you tried the second more secure option described at
http://www.namespro.ca/KB-how-do-i-access-my-mailbox-using-an-e-mail-client.asp
or the IMAP options at
http://www.namespro.ca/KnowledgeBaseArticle.asp?artid=2007&sID=FC50EC2E444540E78CABCBF23352E290

Photo Smart D110a cant connect to the server

Unable to connect to the server to E print to the printer I get the following message on my printer Server Connection Error there was a problem connecting to the server Press retry to connect again or ok to exit. Think this is involved with the change of servers from e print to e connect. checked no firmware available and can't connect with my printer anyhow. Any help appreciated.

If you are trying to setup ePrint but the printer displays unable to connect to server, follow these instructions in this link on how to set a static IP address in your Photosmart printer. The server connection is often related to the DNS and by setting it to Google's DNS (which is defined in my link) you should be able to connect then. Let me know if this helps!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Tethering from BB style to the Playbook

hi
can anyone help me Tether from a Boostmobile BB Style to my (recently bought) playbook please?

Here is the information on Blackberry Bridge:
http://docs.blackberry.com/en/smartphone_users/deliverables/27018/About_Bridge_1266476_11.jsp
You can have multiple blackberries setup to connect to the playbook.
You can only have one blackberry ID for the playbook.
This is fine because in app world, the playbook will only display playbook compatible apps.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

My Complaints To The Playbook Design Team

Bought Playbook 3 days ago, now I kind of regret it.... i dunno. The interface is fast and smooth unlike android tablets, and the web browser is pretty good, got flash and all those good stuff. Here is a list of my complaints:
1. Extremely laggy apps: App World, Bing Map (unusable and closes itself sometimes)
    (the app world is so frustrating to use. theres 1 category with only 1 app!! Are you serious?)
    (Some app icons in the app world made it so ugly)
    (Bing maps is garbage. I'm sorry.)
2. Browser randomly crashes and closes. (was typing this on my PB and it closed on me)
3. No mail client (just some web links. Lazy.)
4. App world is messed up... no apps, poor presentation, poor quality
5. Settings menu lag?? why?????!!! Its just a menu.................... just make it smooth please. don't you guys know how to make a MENU???
6. MSN and skype would have been nice.
7. Half-baked youtube app (at least give us channel support, right now im watching videos in browser (which is perfectly fine but the app looks better))
8. Unable to connect to mac in usb mode
9. Can't you guys speed up the app startup animation?? It can get annoying. If you can make all those cool transations why cant you make the settings menu smooth????
10. I still do not understand why tegra 2 cant handle a system menu. What were the QA people doing? What were the programmers doing???????????????? No amount of question and exclaimation marks can express my anger and frustration. It needs to be reworked immedietly, and an update should be released by the end of next Friday. Fix that app world too. The brownish red color combined with lags and ugly icons are just too depressing, too much to handle.
So now I am stuck with this tablet because the place where I purchased it won't accept returns with opened packages.... I spent 60 more for the leather case too!!!! I like RIM because its founded in Waterloo and I am a student at UW, but PB currently SUCK comparing to other tablets on the market. Please fix asap or I have to sell this on Ebay

Seeing as this is a support forum...
1. Extremely laggy apps: App World, Bing Map (unusable and closes itself sometimes)
    (the app world is so frustrating to use. theres 1 category with only 1 app!! Are you serious?)
    (Some app icons in the app world made it so ugly)
    (Bing maps is garbage. I'm sorry.)
Weird, I've just used Bing maps and noticed that it's been cleaned up a little and looking much better.
You have1 app in one category in App World? Sounds like you might need to reset the cache. Bring up the keyboard and type in 'rst'.
RIM have very little control over what icons developers give their applications.
If by lag you're referring to the slightly jerky scrolling - I believe that App World was written in Flash instead of native code, so it appears slower than, say, the home screen which is super smooth. Hopefully RIM will optimise it down the line, but it's a relatively minor issue on the scheme of things.
2. Browser randomly crashes and closes. (was typing this on my PB and it closed on me)
Fair play, this has happened to me a little lately. I have noticed that there's a memory leak somewhere, but it doesn't happen all the time. All I can suggest is restarting the PlayBook if you notice the memory get low.
3. No mail client (just some web links. Lazy.)
There's a mail client coming in the summer. Web links aren't ideal, I agree. And if ou don't have a BlackBerry phone I appreciate that this can be annoying.
4. App world is messed up... no apps, poor presentation, poor quality
See my answer to point 1
5. Settings menu lag?? why?????!!! Its just a menu.................... just make it smooth please. don't you guys know how to make a MENU???
Works perfectly smoothly on my PlayBook. Have you restarted the PlayBook since you first used it? You might be getting the memory problem that I described in point 2.
6. MSN and skype would have been nice.
Yes, they would have . MSN is likely to come since RIM and Microsoft are now apparently best buds. And seeing as Microsoft have just bought Skype... Who knows?
7. Half-baked youtube app (at least give us channel support, right now im watching videos in browser (which is perfectly fine but the app looks better))
Viva la difference! If the browser fits your needs better, use that. Maybe they will add bells and whistles to the YouTube app, but I'm happy to have it simple like it is. However, that's not to say that it couldn't do with some improvements down the line. You might want to throw that suggestion in the "Things We'd Like to see RIM improve topic".
8. Unable to connect to mac in usb mode
I honestly can't help you here. I run Linux and I can't connect to the PlayBook AT ALL through USB. Luckily networking sharing over Wifi keeps everything working nicely.
9. Can't you guys speed up the app startup animation?? It can get annoying. If you can make all those cool transations why cant you make the settings menu smooth????
Point 5?
10. I still do not understand why tegra 2 cant handle a system menu. What were the QA people doing? What were the programmers doing???????????????? No amount of question and exclaimation marks can express my anger and frustration. It needs to be reworked immedietly, and an update should be released by the end of next Friday. Fix that app world too. The brownish red color combined with lags and ugly icons are just too depressing, too much to handle.
Point 5 again? Seriously, I get no lag on mine. And if a reboot doesn't work you might want to use your technical support contact that gets emailed to you when you start using the PlayBook. I'm not sure why you take such offense to the App World colour.
Please fix asap or I have to sell this on Ebay
Make sure that you keep it in good condition for a better price on sale.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!

Connect wirelessly the playbook to a printer

Similar Messages

Maybe you are looking for