Connect with Exchange server

We are using Coldfusion 9 and Exchange Server 2010.
I installed the certificate in CF 9.
The Exchange server is configured for using OWA.
With the follwing code:
<cfexchangeConnection
    action="open"
    username="<username>"
    password="<password>"
    server="<ip-address>"
    protocol="https"
    connection="testconn1">
I get following error:
Unable to connect to the Exchange server using HTTP/HTTPS protocol.
HTTP response code : 302
Anybody any ideas how to cennect with CF 9 to Exchange 2010?
regards
Feike

I seem to remember something about Exchange 2010 dropping WebDav which CF requires or something, and basically it won't work until CF10. Unless there's been some kind of update or someone knows more than I do about it.
Certainly tried it myself and just hit a brick wall.

Similar Messages

Outlook 2013 not connect with Exchange server 2013 in internal network

Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
Parvez

Hi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support

E71 cant connect with exchange server

I have tried to connect with our exchange server 2003 at work to sync my business e-mail but I am unable to connect. There should be a learn how feature on this topic on the nokia website.
Solved!
Go to Solution.

In my pionion, very minimal inputs are needed to get the connection for MFE.
Exchange server
Secure connection
Use default port
(For these you might need to contact the IT support team of your company)
Access point
(Based on the data plan you are subscribing)
User name
Password
Domain
(This I think you will be aware of)
Rest of the settings are more towards configuring and personalising the set up, and does not involve connectivity.
Hope this info helps.
Regards,
BK76

Losing connection with Exchange Server (2003)

The cause of losing the connection is me disabling the Users Accounts in our MS Domain for Maintenance on the Network.
I assume there must be a certain amount of time where the iPhone trys to connect to the exchange server and then time's out or something like that.
Too get the connection back is usually a restart, turn off on on wifi or airplane mode or reenter the account password.
Any ideas on how I can still disable the user accounts and not have the iPhone's lose their connection or time out?

I don't think this is possible. I use Exchange server at work, so I can tell you what it will do:
- You can do "over the air" IMAP e-mail to your exchange server (if your IT dept supports it)
- You can desktop sync your appointments and edit the from the phone (Edit from phone means view notes, times, etc -- you cannot change attendees, etc.)

I have problems to connect iCal 6.0 (Mountain Lion) with Exchange Server 2007

I used ICal with Exchange Server 2007 without problems with Lion. After I adopted Mountain it has been impossible to use ICal and I have obliged to use Outlook because It was not possible to connect ICal with Server.
I reinstalled Mountain and rebuilt Outlook data base, canceled cache and so on but without results. How cn I do?

I was having problems with this too. I remember it working okay in iOS 7 and then it breaking in iOS 8.
Fortunately, I'm now on the iOS 8.1 beta, and can confirm it's working fine for me. Just how it used to. - I guess that's one of the bugs that Apple's new software will bust. We'll just have to wait it out.

HT1414 Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.

Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again.

All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010

Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Outlook connection to exchange server problem

We have a new domain and an existing exchange server. The problem is if i log in with a local computer account i can autodiscover and connect in cached mode to exchange no problem. If i then login with a domain user account the same computer (tried on other
workstations) will fail to auto discover, fail to connect to exchange even with manual settings. I cant find anything obvious in Group policy.
The server is setup with the latest 2013 Group policy templates with office 2013 templates
Users not logged in with the new AD server can connect to exchange
Users not logged into the domain can access exchange server
My feeling is its a local setting that is missing or needs to be changed in Group Policy but i am at a loss as to what it could be
I have disabled roaming profiles too and it makes no difference.
Any help would be greatly appreciated.
Steve

Hi,
Sorry for my delay. According to your description, I summarize your issue to the following points:
1. No problem when the user logs in Outlook with a local computer account in Cached mode.
2. Can’t connect to Exchange from an cache mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
3. Can connect to Exchange from an online mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
It is right? If I misunderstand, please feel free to point it out. Additionally, I noticed that the server is setup with the latest 2013 Group policy templates with office 2013 templates. Please confirm
if the Outlook cache mode is disabled by OTC or GPO. If there is following registry key applied on the machine:
Software\Microsoft\Office\15.0\Outlook\Cached Mode
Meanwhile, please try to install an Outlook 2013 with a fresh ISO file(Don’t use any template such as OCT template), see if the Cached mode Outlook can connect to Exchange server.
Waiting for your updates.
Regards,
Winnie Liang
TechNet Community Support

Problems using Outlook 2013 with Exchange Server Small Business Server 2003

Hello,
We have just upgraded our Office suite from Office 2007 Pro to Office 2013 Pro. When I try to configure Outlook 2013 to connect to Exchange Server 6.5 (SMS 2003) I get an error "Outlook 2013 being blocked by current version of Exchange Server".
Outlook 2013 at present is not communicating with Exchange server 6.5
Are there any fixes I have to install on our SMS 2003 server to allow Outlook 2013 to work with SMS 2003 Exchange Server?
Any configuration changes I need to make? Any help is appreciated.
Thx
John G.
John Grace

Hi
Outlook 2013 is not supported with exchange 2003:
http://technet.microsoft.com/en-us/library/ee624351.aspx#section10
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Cannot connect to Exchange server (Small Business Server 2008) using Windows 8.1 and Outlook 2013

I am at my wits end. I have got a new PC running Windows 8.1 and Outlook 2013 simply WILL NOT connect to my work Exchange server. The REALLY annoying thing is that the Windows Mail client inbuilt to Windows 8.1 works perfectly! But I have to have Outlook
for the functionality. The issue appears to be that in Outlook 2013 on Windows 8.1, it tries to be clever and auto-detect the settings whereas Windows Mail allows you to input the server and domain names.
I have tried all the suggestions already on some of the boards - manual setup, etc - nothing works! Is it a compatibilityissue with SBS 2008 and Outlook 2013? Any help appreciated!

I am at my wits end. I have got a new PC running Windows 8.1 and Outlook 2013 simply WILL NOT connect to my work Exchange server.................... it tries to be clever and auto-detect the settings.
I have tried all the suggestions already on some of the boards - manual setup, etc - nothing works! Is it a compatibilityissue with SBS 2008 and Outlook 2013? Any help appreciated!
There's no issue with O'2013 connecting with Ex '2007. Also not clear about comments of "auto-detect" versus "....have tried all the suggestions ............ manual setup....". On the one hand your stating that only "auto-detect" is available and on the
other that you've tried "manual settings" (which definitely is an option in O'2013 for EX accounts).
This may have more to do with the fact that you're using a new computer trying to connect to the server which it may not be configured for - something your admin will need to address.
Given that your question is in reference to Exchange - you are likely to get a better/faster answer in the following forum which deals with Exchange server related questions:
Exchange Previous Versions - Outlook, OWA, POP, and IMAP Clients
http://social.technet.microsoft.com/Forums/en-US/exchangesvrclientslegacy/threads
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

Problem in connecting to exchange server

I have generated a certificate as specified in the link http://www.dylanbeattie.net/docs/openssl_iis_ssl_howto.html. It generates an X.509 certificate. I installed this certificate on pop3 server on Microsoft exchange server. I also installed the certificate on client m/c. On client m/c, a Java application is running, which tries to read mails from exchange server using SSL. But this exception occurs when I run my java application:
javax.mail.MessagingException: Connect failed;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:106)
at javax.mail.Service.connect(Service.java:234)
at ci.cryopull.core.PullAction.execute(Unknown Source)
at ci.cryopull.core.PullAgent.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
It seems I am unable to connect to exchange server using this certificate. While I also tried a free trial certificate from thawte, that worked fine. Could u help resolving my problem?
Thanks

Peddard, you will have to be more specific on your settings. It's important to note that the iPhone's host name entry must resolve both internally and externally if it's going to work correctly. So, on your internal DNS server, you must make a mail entry with the same name as what you are publishing externally. In my case, mail.domainname.com is registered on our external DNS server with a public IP address. On the internal DNS server, mail.domainname.com registers to a 192.168.x.x address.
However, you can find in another post that in my situation, the iPhone would not work correctly on our LAN. It worked everywhere else but the issue seems to be that when on the Edge network and the LAN, there is conflicting DNS resolution. This was intermittent and unreliable at best.
Our workaround was to create a second network, simply wirelessly with a couple of Airport Extreme Base stations on a separate external IP address. Now, DNS resolved to the external address and it works like a charm. Not a fix, but a workaround.
JD

Does anyone know how to get apple mail in Lion to connect with Exchange 2007?

Does anyone know how to get apple mail in Lion 10.7.2 to connect with Exchange 2007? It worked perfectly with Snow Leopard... upgraded to lion and it won't work. We use Exchange 2007 with SP 3 and Rollup 4. Won't connect... and I can't get Apple to give me any direction.

We finally got it to work today. We had to call and pay for the microsoft support service, but the issue was on the server end. We had to go into the iis manager... went to sites... when to default website...and changed the SSL settings for Auto Discover, EWS Exadmin, echange, exchweb, owa... and the rest..
Change the settings to ignore client certificates.
Problem solved. Can finally send and receive.

SAP PI Connection Microsoft Exchange Server (Scenario Mail -- SAP PI -- File)

Hi experts,
we want to connect Microsoft Exchange Server to SAP PI. POP3 and IMAP4 is not allowed on mail server side.
But the standard mail adapter in SAP PI (configured as sender communication channel) only works with POP3 and IMAP4.
Can anyone help me to solve this problem
Thank you for your help.
Mario

Hi Priyadshini,
The way that you have developed your java program can be different that the way that SAP did it. With pop3 in PI, as far as i know, it is no possible to change the read/delete properties that the mail server has by default, as Amit and Ilya mentioned you should try with the imap solution or to talk to the mail server administrators.
Are you sure that the messages is being deleted?, have you checked other mail folders in the user account?, may be the message is being moved.
Regards.

Mac performance with Exchange Server 2010 SP1

Hi All,
I have some issue with Mac OS X 10.7.2 performance with when setting up new email connection Microsoft Exchange Server.
1) Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover. Note how long it takes. In my case, it takes almost two full minutes or more until it comes back and is fully set up (and starts synchronizing the server folders).
2) Now use Apple mail create a new EMAIL account MANUALLY -- just don't fill in the password... keep hitting Continue until it shows the POP setting. Select EXCHANGE and then fill in the appropriate details (mail.mydmain.com, check SSL enabled, etc.). Setting up an account this way takes only a few seconds.
3) Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover. it takes few second to completed.
I can summarize that:
- Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover: Slow
- Use Apple mail create a new EMAIL account MANUALLY: Normal
- Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover: Normal
In any case, do you have any solution to fix this issue.

Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu

Writing client app to connect to Exchange Server 2013 and set OOF for users on vacation

I am coding an C# app that should connect to Exchange Server 2013 on-premise (Servers Location is not in our Company). I`ve got an account (User and Pass) with readonly admin-rights for now and want to read and set OutOfOffice Objects for other users. I
decide to use EWS Managed API over Autodiscovery but I am bit confuse how
I tried to connect with "service.UseDefaultCredentials = true" and read contacts -> this code works:
try
            ExchangeService _service
= new ExchangeService(ExchangeVersion.Exchange2013_SP1);
            _service.Credentials
= new WebCredentials("service.exchange",
"1234", "domain");
            _service.TraceEnabled
= true;
            _service.TraceFlags
= TraceFlags.All; _service.UseDefaultCredentials
= true;
            _service.AutodiscoverUrl("[email protected]",
RedirectionUrlValidationCallback);
            foreach
(Contact contact in _service.FindItems(WellKnownFolderName.Contacts,
new ItemView(2)))
var test = contact;
        catch
(Exception exception)
            Console.WriteLine(exception);
After that I tried the same with _service.UseDefaultCredentials = false; got error -> "The Autodiscover service couldn't be located." I am not shure if this "direct log on" is the right way, On msdn I've read about "delegate access"
and "Impersonation" (NTLM and Basic Authentication) I'am a bit confused. Can anybody help me?

hi,
when you set a credential, you don't have to set the UseDefaultCredentials property (it is already updated).
For autodiscover, you should try to set the property EnableScpLookup to True if you are in the Exchange domain or it is known by the current domain.
Autodiscover uses a domain query (through Active Directory) and/or a dns query (this requires a DNS register for autodiscover.domain.net) to determine the access to the autodiscover service URI.
Regards,
Désiré GOVIN Refresh IT Solutions

Connect with Exchange server

Similar Messages

Maybe you are looking for