Connect with Timesten remotely through TimesTen Client on other machine
hi!
my question is that i have two machines which have linux 4 and oracle database 10g installed.
further....
Machine 1 has Timesten database installed
Machine 2 has Timesten Client installed
now i want to connect Machine 2 to Machine 1 by using Timesten client...........
plz help......................
Muh.Usman
On Machine 2:
1. Create a logical server definition for machine 1 in sys.ttconnect.ini
2. Create a client DSN definition in sys.odbc.ini
3. Connect to the client DSN from an application linked with the client driver (such as ttIsqlCS).
This is all covered in the documentation...
Chris
Similar Messages
-
Could not connect to DB remotely through Toad using instantclient
Hi All,
Please, i am facing urgent issue while trying to connect to DB remotely through Toad.. Already searched a lot and followed all suggested solutions but without any success..
"instantclient" already downloaded and configured as below :
dll files like "oci.dll,... etc" are here : C:\Oracle\instantclient\instantclient_11_2
Created both tnsnames.ora & listener.ora are here : C:\Oracle\instantclient\network\admin
And did the below in user/system variables :
User Variables :
=========
TNS_ADMIN with value "C:\Oracle\instantclient\network\admin"
System Variables :
===========
TNS_ADMIN with value "C:\Oracle\instantclient\network\admin"
ORACLE_HOME with value "C:\Oracle\instantclient"
Path edited and added this value "C:\Oracle\instantclient\instantclient_11_2"
But i am still facing the below error :
ORA-12541: TNS:no listener
Really, appreciate your help !
Thanks & regards
MohammedMohammed ... wrote:
Thanks all your help and support..
I reconfigured the instant client following below link :
[http://www.dbatoolz.com/t/installing-oracle-instantclient-basic-and-instantclient-sqlplus-on-win32.html]
and followed your advises as well and i can now connect to database though any user
But unfortunately, i cannot connect as sys user, it gave me below error :
C:\Users\mohammed>sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Tue May 7 17:29:56 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Users\mohammed>
Could you please advise..
Regards,
MohammedIf the client is on the same machine as the database, then you don't have ORACLE_SID set.
More likely the database is on a different server, you have to specify 'sqlplus sys/pswd@dbname'.
And your db will need to be configured to allow remote sysdba authorization, which is not a good idea from a security perspective. -
VPN Issue: Could not Negotiate a connection with the remote PPP server
Hello Folks,
I setup VPN on Windows Server 2003 Enterprise R2. I am successfully able to connect to VPN via laptop internally and externally. However, on my iPhone I am not able to connect and receiving the following error "Could not Negotiate a connection with the remote PPP server".
There doesnt seem to be a lot of documentation regarding this on Apple and or throughout the web.
Anyone resolve this issue?
Peace
Phil C.I am not entirely sure my full setup. I had a friend help me set it up. Now for some reason when on WIFI on my own network I am able to connect to VPN ( I wasnt able to before), but when I switch to edge there is still no response for the PPP server. I even messed around with the PPP options still no response. Unfortunately I am not extremely server literate so my troubleshooting is limited. However it is now working via my own WIFI and will try it on another WIFI network tomorrow. I am wondering though if it connecting had to do with any updates from microsoft. Since this is a newly installed server 2003 it has been running updates. Some food for thought.
Peace
Phil -
TS1741 I lost my Apple TV remote and can't connect with my remote app. What do I do?
I lost my Apple TV remote and can't connect with my remote app. What do I do?
Buy a new remote or borrow one and make remote app work
-
Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?
You could try updating your apple TV and then restarting it. Bit of a guess.
-
XIO: fatal IO error connection with a remote socket was reset by socket
dear all ,
i have ebs running on aix 6 server
oracle db : 11.1.0.7.0 - 64bit
ebs version : 12.1.1
the problem is i have report running on cuncurent schedule , but the result with status complete error ,
when i view log , it shawn error below this
Enter Password:
XIO: fatal IO error 73 (A connection with a remote socket was reset by that socket.) on X server "localhost:0.0"
after 498 requests (469 known processed) with 4267 events remaining.
Report Builder: Release 10.1.2.3.0 - Production on Mon Sep 24 20:04:26 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 30072710.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 30072710 on node SMJKT-PRFN02 at 25-SEP-2012 00:05:51.
Post-processing of request 30072710 completed at 25-SEP-2012 00:05:55.
any suggest to solve this error ?
thanks
Imron S
Edited by: Imron Siagian on Sep 24, 2012 8:57 PM
Edited by: Imron Siagian on Sep 25, 2012 2:57 AMHi;
XIO: fatal IO error 73 (A connection with a remote socket was reset by that socket.) on X server "localhost:0.0"after 498 requests (469 known processed) with 4267 events remaining
Similar issue mention at below note.Please review:
What Happens When an NMS User Kills Their Exceed onDemand or Exceed Session Via Windows Task Manager [ID 1072528.1]
Regard
Helios -
i have an iphone 5, 2 months old. i am having trouble connecting with any device through bluetooth
can not find any other device .like my car CD or other bluetooth audio device even my laptop.
i will be grateful fi some one can help
best regards
samAnd I forgot to mention I have just changed email addresses so with the old email it was all working then with the new email I'm only functioning one direction.
-
Not able to connect with Oracle server through VBScript without DSN
Hi
I have both Oracle9i and Oracle10g clients installed with local system.
I am able to connect to Oracle Database 11g Enterprise edition server though sqlplus through command prompt and also through AQT without any error.
As the server has lots of database ,whenever I connect to a particular database through sqlplus from command prompt,I connect as below
C:>sqlplus username/password@service_name
and it gets connected without any error.
When I am trying to connect the same database through VB Script,I am getting ORA-12560 TNS:Protocol Adaptor Error.
Below is the connection string I am using:
Database_String = "SERVER=xxxx.vvvn.Com;Driver={Oracle in OraHome92};DATABASE=service_name;user id=userid; password=passowrd"
I have installed a Oracle10g server in my local system and tried to connect the same way and I was successfully ,but its not working when the server is running remotely.
Does it make any difference with the version of driver being used ?Should I need to modify my connection string anyway.
Please help me as to identify the issue.Thank you very much in advance.
Regards
Sahinacheck the listener status in server end,
lsnrctl status
lsnrctl servicesif not start
lsnrctl startThanks -
Very slow connection with db2 ver 9.1 client on win2000
I have been having difficulty in diagnosing why when after installing db2 9.1 fp5 client on our wind2000 box which has Crystal Embedded 10 RAS ( service pack 6 ) running, the reports that i am invoking using the Java SDK ( we have an online J2ee web application ) are very slow. I have narrowed the problem area down to where the java sdk is trying to set the table location.
Using the db2 7.1 client since 2005, we have not had this issue. We must upgrade to ver 9.1 db2 since this is being done at an enterprise level. I upgraded our test server to 9.1 and noticed this slowness. With the 7.1 db2 client and the same RAS server, the reports take about 2 or 3 seconds but with the 9.1 client the reports take about 40+ seconds each and this is always as the setTableLocation method. Once is goes through this, the rest runs fine.
I have tested this with a local db2 datbase on windows, a remote db2 database 3000 miles away ( same as with what the 71 client runs against) and it is consistently the same response time.
I did notice that if I ran my java online on the same server as the RAS server, the response time is great. This only seems to be happenning when the java app is not on the same server as the RAS server.
I also have a java stub that does not run in a web container. in this case, with the same code and the same databases, whether i am local or remote from the crystal server, the response time is 40+ seconds to connect.
The .rpt files are developed via Crystal Reports 10 and we develop on a local database and we modify the database credentials throught the SDK as we deploy upto production. I have also tried this with the same database we developed with and the same 40+ seconds connect time.
All of these scenarios work fine with the 7.1 client.
so it seems there is some connection issue with the 9.1 client only.
Need help urgently.I have exactly the same issue.
-
IPhone connection with B1i Server through internet
Dear All,
iPhone is successfully connected with my B1i server through intranet (wifi connection).
But When i am trying to connect my B1i server through internet, I am getting the following issue.
I am getting an error as follows when i try to browse the tomcat homepage in IE
XCL198 HTTP-access currently not allowed from remote clients, as B1iP runs in local-mode or safe-mode.
I followed the solution given in B1iC troubleshooting Guide.
I am using SAP 8.81 patch level 6.
Maintenance->CFG Runtime parameters as
B1i Http port :8080
B1i Https port : 8443
B1i Server : My server ip
Please help me to resolve this problem.Ken, George, Dear all,
in given context of problems running the mobile solution, please do NOT change B1i server Xcellerator properties at all.
Quite frequently there are ideas to change the default settings of WebDAV and remote settings of B1i server. This is simply a waste of time and definitely not required for troubleshooting or making the mobile
solution working.
Simply check the documentation 'Administrator's Guide for the Integration Component' for the purpose, the default settings, and further info about these properties you instruct to change:
a) About xcl.http.localOnly
Administrative Web access is limited to the local machine only. After installation, it is possible to manually allow access by remote machines by changing the particular setting in the operating system configuration file
(Xcellerator.cfg).
For additional documentation, choose Start → All Programs → Integration solution for SAP Business One → Integration framework, and then choose Help → Ref 04 – Operations, chapter 6.2.
b) About WebDAV-based access
WebDAV-based access to BizStore content is disabled. SAP does not recommend enabling this kind of access for productive systems, as this is typically needed for development systems only.
For additional documentation, choose Start → All Programs → Integration solution for SAP Business One → Integration framework, then go to Help → Ref 01 – Dev Environment, chapter 3.
For checking the connectivity from mobile to server / excluding network issues, B1iP can definitely run in local mode. When calling the server from mobile, B1iP would give you a fully sufficient, proper
response:
SAP B1iP detected an error: Emitted HTTP-Code 403 - Forbidden
Internal Reason XCL198 HTTP-access currently not allowed from remote clients, as B1iP runs in local-mode or safe-mode.
- This is exactely the alleged 'error', Tamizharasi mentioned at the beginning. Behind the internet connection issue from iPhone to his B1i server (which was unfortunately not described at all) must have been a quite different root cause - changing xcellerator properties is unfortunately a wrong recommendation here in order to clear such general iPhone issue.
I am concerned here from security side, such settings may not be amended lightly, and lead the problem-solving in the wrong direction - beside your additional efforts.
We do recommend to keep the default values and undo such configuration changes again, if not needed.
For troubleshooting the mobile solution please check SAP note 1602674.
Best regards, peter -
I cannot establish VPN connection with rv120w to shrew soft client
1. I bought 2 rv120w router and install one direct to WAN and one behind router-hub.
2. one behind router is set DMZ, and each are conneted Site to Site vpn
3. I need to connect each site with my mobile devices(1 notebook, 2 Win8 tablets, 2 android devices )
4. i use wibro mobile router, win8 devices're behind router, and their fort is fowarded(DMZ)
5. I'll take care of Android devices later, here now, my trouble is Win8 devices
6. i installed cisco QuickVPN software. frankly,that software is shit. i don't know why but it even cannot reach router, no log generated on rv120w. and i dont want PPTP connection. sorry for criticism but I'm sure many of QuickVPN users(and people who fail to be a user) agree with me. it's 2014. not 1998.
Cisco should be shamed for that software. it looks like a second grade collage student's 2nd semester project(Many of them're batter nowadays.) and doesn't work.
more amazing fact is that's only software that RV series provides officialy. What the...so in conclusion, Cisco does not provide any IPSec client connection tool at all. does that makes any sense?
7. i tried 10 or more hours to make IPSec client connection with many vpn client soft ware, this is my closest shot.
RV120W log :
2014-10-02 15:03:05: [rv120w][IKE] INFO: Configuration found for 175.xxx.xxx.xxx[500].
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received request for new phase 1 negotiation: 11x.xxx.xxx.xxx[500]<=>175.xxx.xxx.xxx[500]
2014-10-02 15:03:05: [rv120w][IKE] INFO: Beginning Aggressive mode.
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received Vendor ID: draft-ietf-ipsra-isakmp-xauth-06.txt
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received Vendor ID: RFC 3947
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received Vendor ID: DPD
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received Vendor ID: DPD
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received Vendor ID: CISCO-UNITY
2014-10-02 15:03:05: [rv120w][IKE] INFO: Received unknown Vendor ID
2014-10-02 15:03:05: [rv120w][IKE] INFO: For 175.xxx.xxx.xxx[500], Selected NAT-T version: RFC 39472014-10-02 15:03:06: [rv120w][IKE] INFO: Floating ports for NAT-T with peer 175.xxx.xxx.xxx[4500]
2014-10-02 15:03:06: [rv120w][IKE] INFO: NAT-D payload does not match for 11x.xxx.xxx.xxx[4500]
2014-10-02 15:03:06: [rv120w][IKE] INFO: NAT-D payload does not match for 175.xxx.xxx.xxx[4500]
2014-10-02 15:03:06: [rv120w][IKE] INFO: NAT detected: Local is behind a NAT device. and alsoPeer is behind a NAT device
2014-10-02 15:03:06: [rv120w][IKE] INFO: Sending Xauth request to 175.xxx.xxx.xxx[4500]
2014-10-02 15:03:06: [rv120w][IKE] INFO: ISAKMP-SA established for 11x.xxx.xxx.xxx[4500]-175.xxx.xxx.xxx[4500] with spi:90dd9f6bf4d51d95:70f7c62456edef9e
2014-10-02 15:03:06: [rv120w][IKE] INFO: Received attribute type "ISAKMP_CFG_REPLY" from 175.xxx.xxx.xxx[4500]
2014-10-02 15:03:06: [rv120w][IKE] INFO: Login succeeded for user "fxxxxxxxxX1"
2014-10-02 15:03:06: [rv120w][IKE] INFO: Received attribute type "ISAKMP_CFG_REQUEST" from 175.xxx.xxx.xxx[4500]
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] WARNING: Ignored attribute 5
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] WARNING: Ignored attribute 28678
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] ERROR: Local configuration for 175.xxx.xxx.xxx[4500] does not have mode config
2014-10-02 15:03:06: [rv120w][IKE] INFO: Purged ISAKMP-SA with proto_id=ISAKMP and spi=90dd9f6bf4d51d95:70f7c62456edef9e.
2014-10-02 15:03:07: [rv120w][IKE] INFO: ISAKMP-SA deleted for 11x.xxx.xxx.xxx[4500]-175.xxx.xxx.xxx[4500] with spi:90dd9f6bf4d51d95:70f7c62456edef9e
Phase 1 Setting
Selected IKE Policy View
General
Policy Name
FDCStD
Direction / Type
Responder
Exchange Mode
Aggresive
Enable XAUTH Client
Local Identification
Identifier Type
Local Wan IP
FQDN
112.167.xxx.xxx
Peer IKE Identification
Identifier Type
Remote Wan IP
FQDN
175.xxx.xxx.xxx
IKE SA Parameters
Encryption Algorithm
3DES
Authentication Algorithm
SHA-1
Authentication Method
Pre-Shared Key
Pre-Shared Key
qpwoeiruty
Diffie-Hellman (DH) Group
Group 2 (1024bit )
SA-Lifetime
28800 Seconds
Phase2 setting
Add / Edit VPN Policy Configuration
Policy Name
Policy Type
Auto Policy Manual Policy
Remote Endpoint
IP Address FQDN
NETBIOS
Enable
Local Traffic Selection
Local IP
Any Single Range Subnet
Start Address
End Address
Subnet Mask
Remote Traffic Selection
Remote IP
Any Single Range Subnet
This field is not editable, because netbios is selected.
Start Address
End Address
Subnet Mask
Split DNS
Split DNS
Enable
Domain Name Server 1
Domain Name Server 2
(Optional)
Domain Name 1
Domain Name 2
(Optional)
Manual Policy Parameters
SPI-Incoming
SPI-Outgoing
Encryption Algorithm
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Key-In
Key-Out
Integrity Algorithm
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
Key-In
Key-Out
Auto Policy Parameters
SA-Lifetime
Seconds KBytes
Encryption Algorithm
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Integrity Algorithm
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
PFS Key Group
Enable
DH-Group 1 (768 bit) DH-Group 2 (1024 bit) DH-Group 5 (1536 bit)
Select IKE Policy
FDCStSFKS FDCStD
Shres client setting
Phase 1 Setting
Selected IKE Policy View
General
Policy Name
FDCStD
Direction / Type
Responder
Exchange Mode
Aggresive
Enable XAUTH Client
Local Identification
Identifier Type
Local Wan IP
FQDN
112.167.xxx.xxx
Peer IKE Identification
Identifier Type
Remote Wan IP
FQDN
175.xxx.xxx.xxx
IKE SA Parameters
Encryption Algorithm
3DES
Authentication Algorithm
SHA-1
Authentication Method
Pre-Shared Key
Pre-Shared Key
qpwoeiruty
Diffie-Hellman (DH) Group
Group 2 (1024bit )
SA-Lifetime
28800 Seconds
Phase2 setting
Add / Edit VPN Policy Configuration
Policy Name
Policy Type
Auto Policy Manual Policy
Remote Endpoint
IP Address FQDN
NETBIOS
Enable
Local Traffic Selection
Local IP
Any Single Range Subnet
Start Address
End Address
Subnet Mask
Remote Traffic Selection
Remote IP
Any Single Range Subnet
This field is not editable, because netbios is selected.
Start Address
End Address
Subnet Mask
Split DNS
Split DNS
Enable
Domain Name Server 1
Domain Name Server 2
(Optional)
Domain Name 1
Domain Name 2
(Optional)
Manual Policy Parameters
SPI-Incoming
SPI-Outgoing
Encryption Algorithm
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Key-In
Key-Out
Integrity Algorithm
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
Key-In
Key-Out
Auto Policy Parameters
SA-Lifetime
Seconds KBytes
Encryption Algorithm
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Integrity Algorithm
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
PFS Key Group
Enable
DH-Group 1 (768 bit) DH-Group 2 (1024 bit) DH-Group 5 (1536 bit)
Select IKE Policy
FDCStSFKS FDCStD
Shres client setting
8. in rv120w setting for advanced seup> Policy Type>
there's two option FQDN and IP Adress
when I'm in none static IP Adress environment, how should I set that field?
RV120w do not support none static IP Adress?Hi kastwf001,
My name is Mehdi from Cisco Technical Support, just want to inform you regarding QuickVPN is an light software using IPsec service of windows, so here it depend of windows and firewall ... IPsec setting on windows, encryption ...
anyhow for RV120W it's open for 3rd party software as ShrewVPN , TheGreenBow ... and working as expected since those software are using their ip sec services ..
Please follow configuration steps on RV120W and ShrewVPN (screenshots taken from you post) :
Please let me know if you have any question
Please rate the post or mark as answered to help other Cisco Customers
Regards
Mehdi -
Connection with a remote cache
Hi,
I have an option to connect to cohernace clustre by
1) Connect as an Extends node
2) Connect as a non storage node
out of the 2 options which one is better and why ?
I think conncetion as a non storage node is a better option, I have to connect to a remote cache, so I am tempted to use Extend node connectvity, so I am interested to know the limitation of Extnds node over non storage node (if any) .
ThanksHi,
Every option will be better or not depending on your requirements.
If the client application that you are going to connect to the Coherence cluster is written in Java then you have the option of connect as storage-disabled node. This is what you would likely do for a long-running, web-based application that is collocated with the data grid.
If your application will probably be getting connected and disconnected from the Coherence cluster several times (i.e. many times a day) then even if it's storage disabled it may result in some overhead, as cluster membership information needs to be maintained. This could be aggravated if your client access the cluster across an unreliable, high-latency WAN link. For this kinds of clients, Coherence*Extend allows you to keep cluster membership as stable as possible, and the amount of network traffic caused by repartitioning to a minimum.
Also, consider that Coherence*Extend is your only option when you need to access the Coherence cluster from a non-Java application, such as .NET or C++ clients.
Regarding limitations of extend nodes, the "Best practices for coherence Extend" document could be useful for you. it is available at http://coherence.oracle.com/display/COH35UG/Best+Practices+for+Coherence+Extend
-Cris -
Airport Express connectivity with a remote server
I have gone to our ISP already with this question, but they cannot assist me. I am hoping someone here will be able to assist me in solving this problem. My boss wishes to connect to our server at our company from his home using an Airport Express. The company's server is housed on our work site and connected to an internal network. This network is in turn connected to our ISP via a DSL modem. We opened the ports needed in order to connect with the server in house and redirected incoming traffic to the server's internal ip address. We had our boss test connecting to the server from his home. He could not do so. We were asked to have him try connecting directly to his DSL (also from the same ISP as what our company has). He will be doing that this evening. However, this does not help the fact that this diminishes the whole idea of him having wireless capability in his home or when he is traveling. We had our ISP test accessing our server remotely using Telnet, and it was successful. They were connected directly, however, not using a wireless network.
Is there something that we are missing here involving some sort of setting? Or is this something I need our ISP to dig into further? Please let us know if you have any ideas or suggestions. Thank you.
Apple iBook Mac OS X (10.4.7)To combat the issue, enable an HLB port on your FE servers (or any other pool you are using HLB on) and configure the health checks for the load balancer to use that port instead of the port used for TLS traffic.
Start by configuring the pool in Topology Builder, right click the pool, and choose Edit Properties>General. Place a check in the “Enable Hardware Load Balancer monitoring port” and specify a port.
Also you can refer below link
http://ocsguy.com/2011/11/02/lync-hardware-load-balancer-monitoring-port/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My MacBook pro will not connect to the Internet through wifi yet all other devices do
My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?
Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...
Maybe you are looking for
-
BEST WAY TO REFRESH A MATERIALIZED VIEW
Hi, I have a Materialized View that was created after two Base Tables, Table A is a Dynamic Table, this means that it have Insert's, update's and delete's, and a Table B that is a Fixed Table, this means that this table do not change over time (it's
-
I watched several template tutorials and they seem to stop short on how to manage a website so that Contribute users can edit the website easily and web developers adding menu items without the need to update every page. So as I understand one create
-
Archlinux is moving to systemd
Hello! As far as I know Archlinux is moving now to systemd. Personally I fine with systemd, because I'm using it already. I'm also fine with SysVinit. I use systemd, because a dev told me that the move will likely happen in future and I had to instal
-
Recently my macbook started logging me out at random times and then I thought that maybe if I updated the software it won't do it anymore but whenever I go to click on the software update icon it logs me out. I'm worried that this might be something
-
Firefox is my default browser and since the most recent Firefox update I have been unable to click through links I receive from Windows Live Email to the Firefox browser, but it works if my browser is set to IE9?? I have checked the defaults settings