Connected ipad to win 7 computer to upgrade it thru itunes. Says ipad has latest version but did not install correctly. Appear to have lost everything

Connected ipad to win7 computer to upgrade os as I needed to download an app. Says it has latest version but it did not install correctly. Ipad says hello,asks for language and location,wi-fi then options are set up as new ipad,restore from icloud or itunes backup. I think I have managed to backup over my good backup and lost everything. Ipad will not boot HELP

Hello RodneySmart,
Thanks for using Apple Support Communities.
From what I understand about your issues is that your iPad will currently not turn on. In attempt to resolve this issue please follow the steps in order below:
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
Alex H.

Similar Messages

I upgraded to CS5 on old pc, but did not install it. I have new pc and want to install upgrade

PS5 was on sale and I upgraded but did not install on OLD pc. I now have a new pc and want to install my CS5 and don't know how to go about it

use your installation discs or download the installation files.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

IPad mini - The latest IOS 7.1.2 has downloaded but did not install.

The latest iOS update - 7.1.2 downloaded on my iPad mini but did not install. How do I force it to install or delete the downloaded start over?

Connect iPad to computer iTunes and sync from there.

I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly. Please reinstall the iPod's software." Not sure what I need to do. I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

HT1222 On my iPad mini, I did automatic update for iOS 6.1.3. It downloaded it but did not install. Install update is not highlighted and there is a message that a connection is required when its already connected to Internet. What can I do to install

I click the auto update on general settings of my iPad mini for ios6.1.3. It was downloaded but not installed. Install was not highlighted with message Internet connection is required. The mini is connected to Internet. How can I install it

Hey Beata G,
Welcome to the Apple Support Communities. If you are unable to install the software update, you may need to plug the iPad Mini into a power source. If it is below a certain percentage in power it will require power to ensure that iPad Mini does not loose power when installing. If you still have issues the following article will walk you through that process and also if you want to update the iPad Mini through iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Regards,
-Norm G.

How come when i connect my nano to my computer it says in itunes "an ipod has been detected but could not be itentified properly"?

whenever i connect my ipod nano to my computer, itunes gives me a pop-up that says, "an ipod has been detected, but it could not be identified properly. Please disconnect then reconnect the ipod, then try again." when i do that, i get the same pop-up. beneath the pop-up stated before it also says "If the problem persists, uninstall Itunes, then install Itunes again." but after doing that, it still will not read my ipod and scan it in.

Does the Apple ID on the iPod match the Apple ID on iTunes?

IPad has update software but will not work with iMac with updated software

I have the iPad running the 5.1.1 and when the iPad is plugged into the wife's new iMac running iTunes 10.6 I get a message
The iPad “Ase’s iPad” cannot be used because it requires iTunes version 10.5 or later. Go to www.itunes.com to download the latest version of iTunes.
I check the iTunes and it's at 10.6, and iTunes will not even recognize the iPad under devices.
Again while plugging in the wife's iPhone you get the following:
The iPhone “iPhone” cannot be used because it requires iTunes version 10.5 or later. Go to www.itunes.com to download the latest version of iTunes.
Again the iTunes is at 10.6
Any help with this? Do I remove the iTunes completely?
Shouldn't be this hard.

Locate the iTunes app in Applications folder, highlight it and type Command I (I as in Ivan) and look to see what version is installed. If it's still 10.4 then navigate to
http://support.apple.com/kb/DL1426?viewlocale=en_US&locale=en_US
Then download and install following the on-screen directions. Once it installed it wouldn't hurt to restart in Safe Mode, this will clear some caches, it's possible one or more is corrupt.

I did the upgrade to my iTunes yesterday and it did not install correctly. Kept getting same message. Now cannot download any iTunes without getting windows error 126. Please help.

Upgraded my itunes yesterday and it failed. Tried reinstalling and failed again. Now tried to install several earlier versions and coming up with windows error 126. Do you have any ideas on how I can fix this? Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99732)

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

I want to upgrade my imac 10.4 Tiger to Snow leopard but will not install as it states I need 1GB RAM please help?

I want to upgrade my imac from 10.4.11 Tiger to Snow Leopard, I have tried to install but it states I need 1GB RAM to install
can anyone help as to what I need to do next.
Thanks

Go to a site such as OWC's or Crucial's and buy the RAM.
(124598)

ADOBE Acrobat Pro 9 Pro - Says Upgraded Version but did not purchase as upgrade

I just installed a brand new supposedly unopened ADOBE Acrobat 9 Pro. I installed it with serial number but now it says that the serial number I entered indicates it is for an upgrade version of ADOBE Acrobat 9 Pro. The sales ad said nothing about an upgrade and needing prior version serial number and neither does not box itself. I can't find a phone number for customer service. This follow a previous installation of the trial of ADOBE Acrobat 11 but first time using I was adding comments to review a 50 page document and whole thing was lost. Help!?

To be very clear, Adobe hasn't sold licenses either for new installations or upgrades to Acrobat 9 in a number of years and it is most highly unlikely that you made this purchase through an authorized Adobe reseller. Adobe Customer Support cannot assist you with this. You need to go back to whoever sold this to you. When purchasing licenses for old, out-of-date versions of software and/or from non-authorized resellers, buyer beware! There are quite a few pirates and scammers out there, especially on eBay and even as third party resellers via Amazon!
- Dov

If I were to buy an ipad with retina display but did not purchase the ipad with the data plan with a carrier at the time would it be possible to add that feature later on or is it a certain ipad that goes only with that feature?

Please answer

Data plans for the iPad in every country I know of are month-to-month or pay-as-you go. No contract is necessary or in general even offered; you sign up and discontinue as you please.
Regards.

I have a MAC with OS 10.6.7 and after upgrading Adobe Flash Player to 10.1.102.64, after which I got a message saying Firefox was no longer protected against online attacks. I tried to upgrade to Firefox 4.0.1, could download it but could not install it

When I tried to drag the Firefox icon (as instructed after downloading) to Applications, it kept "bouncing" back. I have assumed my system would not accept it.

What have you figured out? Anything? What you show just shows a pretty quiet system except for firefox having a bunch of tabs open. You've got some page ins and outs so you maybe your'e hitting your HD with swap files more than what you think?
I think something like coconut battery app or something like it will tell you the charge cycles on the battery. How many do you have?
Lastly, are you using any extensions like ad blocker, or click to flash?

I tried to install iTunes on my Windows computer but a message keeps popping up saying that it did not install correctly. It was an Error 7 (Windows error 126). How do I install?

It wont install I wonder why it doesn't. iTunes has installed but it says it has installed incorrectly.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Connected ipad to win 7 computer to upgrade it thru itunes. Says ipad has latest version but did not install correctly. Appear to have lost everything

Similar Messages

Maybe you are looking for