Connected PC Mini to Mac... Lost songs!

Hello,
I connected a PC formatted mini to iTunes 4.9 on a Mac and added a number of songs. I then tried to play the previous songs that were installed on a PC and the menu just skipped over the tune. The only songs that play now are the ones that have been recently added on the Mac. The names of the previous songs are still in the playlists, albums and song menus.. Is there any way to reconnect to the songs and make them work again?
Thanks in advance.
Gary

If the photos that were on your iPad mini were synced from another computer, you erased them by syncing with your Mac. They are gone now and cannot be retrieved unless you sync them back using the other computer. If you do that, then you will erase the iPad again and replace the contents on ot with the contents of the iTunes library on the second computer.
You can only sync with one computer at a time. There are other ways to share photos from other comouter's and devices. Ask whoever synced the photos onto your mini to provide you with a flash drive with the photos on them, copy them to your Mac and then sync them using iTunes on your Mac.

Similar Messages

  • Connected to other itunes library/lost songs

    hi, I have just brought a new laptop and loaded itunes. I copied my old Library accross but many songs and therefore album artwork has gone from my library. I tried to copy it back from my ipod. Is this possible?
    Itunes says that my ipod is synced to another itunes library. How do I find out which one, and what can I do about it?
    Thanks
    BigMatt8

    The music sync is one way - computer to ipod.  The only exception is itunes purchases.  Without syncing:  File Transfer Purchases.
    "Itunes says that my ipod is synced to another itunes library.  How do I find out which one"
    It was synced to your old computer, correct?
    "what can I do about it?" 
    Nothing

  • Hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.

    hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
    my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • HT1296 when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

    Thanks for your advice. However my private informations have nothing to do on a wandering cloud that floats on high over US vales and hills ( and credit to William WORDSWORTH for his poetry)

  • If I connect HDMI between TV & Mac Mini will audio pump out the TV Speakers?

    I connected my Mini with HDMI to my 46in Samsung the Mini recgonized it as 1080 and it looks great.  Though the audio was coming out the speaker in the Mini.  Shouldn't it come out the TV speakers?

    Check this info on connecting a Mac Mini to a TV.

  • Connecting Logitech Z5500 to Mac Mini or to Airport?

    All,
    I have this cable on order (http://www.amazon.com/dp/B0002JFN1A/ref=pe_385040_30332190_TE_M3T1_ST1_dp_1) to connect my Logitech Z-5500 to my system.
    Should I connect it to my Mac Mini, or to my Airport Time Capsule?
    Airport: I can stream media from other devices
    Mini: Avoid any lag for audio and video with FaceTime, etc.?
    Maybe 6 of one, half dozen of another, but thought I'd ask.
    Thanks!

    ok, my problem is solved ... I was able to get the display up by unplugging the hdmi cable from the mac mini, then letting it boot up, then plugging the cable back in ... finally could see the desktop, then reset my display settings to get rid of underscanning - which I had set up the day before so I could see my top menu bar - then set my tv's aspect adjustment to HD Size 2 (which had the same effect as underscanning ... and now I get the display up when start my mac mini ... however, I do notice some fine granularity in my display now (when white windows are opened for example), but I'll deal with that later if it's a real problem ... took hours of research to figure this out ... phew ...

  • What does connecting iPad mini to my Mac Mini  through Bluetooth do

    what does connecting iPad mini to my Mac Mini  through Bluetooth do

    There is nothing else you can do as regards the Mac. Bluetooth between a Mac and an iOS device works only for tethering so you can share the iOS device's cell connection. Otherwise, Bluetooth in an iPad is for connecting to peripherals such as headsets, in-car systems, and keyboards.
    Regards.

  • I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite

    I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite.
    I have downloaded drivers from Brother
    I have tried searching for the printer once the drivers have been installed, but nothing...
    Not sure what else to do - any helpful suggestions are welcome.
    Thank you

    I tried the Reset Printer option - it didn't work at first but then I decided to download the drivers again... and now all is fine and dandy.
    Thanks for your help

  • Mountain Lion appears to break VNC connection to a headless mac mini.

    I connect to my headless mac mini with VNC.  Under lion this worked perfectly.  With Mountain Lion on my mac mini I can connect but many windows do not update properly.  If I connect an external display to the mac mini all is well again.  Any solutions?

    I use splashtop.
    Able to reach iPad resolution when i connect to my iPad, when the splashtop session ends, it drops back to 800x600.
    Maybe you could try it out and see if splashtop helps expand to 2560 x 1600.

  • I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

    I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

    If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
    If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

  • Connect dell s2240t to mac mini

    can i connect dell s2240t to mac mini and there are any drivers?

    The specs:
    http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&cs=19&sku=320-97 38
    only lists Windows 8 as being compatible. Unless you can find drivers that support OSX, the touch feature will not work.
    Have you tried:
    http://www.touch-base.com/

  • My problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

    my problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

    Not much you can do.  You overwrote your current data with older data when you restored the phone from that backup.  Your data's gone.

  • Mouse jumps when 2nd connected monitor is off. mac mini 2012, 10.8.5

    I mentioned this on another thread but will post one on my own.
    My mouse skips occasionally (like every 5 secs) on my 2012 mac mini with 2 displays connected. One via HDMI the other using the thunderbolt port with a minidisplay to dvi adaptor.
    If the 2nd monitor is off i get the jumps. If i turn it on mouse works ok. I swapped around the connections i.e. connect primary monitor on thunderbold and 2nd on hdmi and still same issue. When both are on mouse is ok.
    Also tried with just one monitor connected and mouse works ok.
    Its a bug and please apple fix it.
    I use a microsoft wired mouse whuch i have for many years and has never caused me any trouble on either my win laptop or my previous imac..I tried another wired microsoft mouse and also a wireless logictech mouse. Same problem.
    I also tried with mouse connected directly on the mac and on a usb hub which i normally use.
    thats on 10.8.5

    well both wired mice (the one jumping and the one not) are not bluetooth. In fact i have bluetooth turned off on the mini.
    I do have an external usb3 HD connected but only occasionaly and the problem has been happening regardless of the HD connected.
    The mini sits right next to a loudspeaker (i do audio work) but that is supposed to be magnetically shielded.
    And in any case all these electrical devices should conform to electrical inetrference standards..
    Plus it also happens with the wired mice...
    There is a usb2 audio interface connected plus a usb2 hub and a FW800 HD as well if that helps.
    Will test tomorrow with all these disconnected and just the mouse and display monitor. (its 4am now here in greece)

Maybe you are looking for

  • Using Cursor and FOR LOOP to INSERT the data into table

    Hi all, I have SELECT statement that returns 3 rows: PROCESSNAME PROTDATE IMM 2013-12-18 Metrology 2013-11-18 CT 2013-12-04 SELECT  processName, MAX(NVL(protStartDate, protCreateDate)) AS protDate     FROM TABLE(SEM_MATCH("{             ?ipc rdf:type

  • Can I use Tiger and Snow Leopard on my Mac Pro?

    I have a 3 year old Mac Pro with 2 internal hard drives installed by Apple at the time of purchase. At present, I'm using Tiger 10.4.11. I've purchased Snow Leopard (The Family Pack with 5 licenses) and have installed it on my MacBook Pro. I haven't

  • Problems rendering raw with Olympus OM-D

    I love Aperture. Have been using it for years. However, I just had problems with raw files shot with my Olympus OM-D. I recently went on a National Geographic Expedition in New York taught by Joe McNally. Fantastic experience. The outdoor raw OM-D sh

  • Local variable can't be accessed from inner class ???????? Why ??????

    Plesae help, help, help. I have no idea what to do with this bug......... <code> for ( int i = 0; i <= 2; i++ ) { for ( int j = 0; j <= 2; j++ ) { grids[i][j] = new MyButton (); grids[i][j].setBorder(but); getContentPane().add(grids[i][j]); MyButton

  • Email address used for registration deleted

    We purchased adobe acrobate pro 10 a couple of years ago. My secretary registered the software from her email address. She has since left the company and her address has been deleted. I have a new computer and can't download the software because the