Connected to Acess Point but cannot connect to the Internet - WRT54G
Yes, regrettably I know this is a common problem, but I've spent hours researching adn chatting with Linksys and trying different things, and I can't get anywhere. I have no problems getting on the Internet at the "base computer". Said base computer is on Windows XP. The computer that I am trying to connect to wirelessly is on Windows 2000. As my title suggests, it detects the router, but can't connect to the Internet. I'm using a WUSB54GC there. Ok, on the Base computer, I have disabled the firewall. My IP config reads as follows:
Ethernet Adapter LAN Connection:
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gway 192.168.1.1
PPP Adapter (for my ISP)
IP Address 213.178.113.182
Subnet 255.255.255.255
Default Gway 213.178.113.182
TCP/IP from control panel, LAN Settings (Static)
Exactly as above on the Ethernet Adapter
DNS Server Addresses
Preferred 192.168.1.100
Alternate 4.2.2.2
However, when I go into Internet Options/Tools/Connections/LAN Settings, the “Automatically detect settings” box is checked off. Is this a problem? Proxy server is not checked. ISP settings have nothing checked off except our username and password
COMPUTER TRYING TO ACCESS NETWORK (running on Windows 2000)
IP Config Readings for the Ethernet Adapter:
IP Address 0.0.0.0
Subnet 0.0.0.0
(this is strange because earlier I was obtaining digits)
TCP/IP, LAN Connection, Static
IP 192.168.1.10
Sub 255.255.255.0
Default 192.168.1.1
Preferred 192.168.1.1
Alt 4.2.2.2 Any hints? Thanks very much
Disconnect the PPP Adapter from Network Connections...
You should do the steps mentioned earlier, in addition you should remove all static ip addresses entered and then check the IP Address obtained automatically from your router, if you get a valid ip address you should try to ping 4.2.2.2, type ping 4.2.2.2 and press Enter, see if you get 4 replies from 4.2.2.2...
Then type ping yahoo.com and see if it gives you 4 replies...If you get replies from all pings you should be able to go online...
You should adjust your browser settings if you get replies and there is no internet...
Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Similar Messages
-
Visual internet connection, but cannot get on the internet? Help:(
Hi people.
My wife bought me an Ipod touch. This is a long time ago, because I cannot use it with my wi-fi connection home. I took it with me to my parents, and it worked without any problems there. I took it with me to my place, and I got the same problems.
It says that I got connection and I have the Wi-fi connection icon, but I'm not connected to the net.
I've tried to connect many times. I've deleted and restarted the thing. I've looked at the IP adress, and it started with 169. I've tried to look at this discussion board, but haven't found any help.
I'm getting quite desperate, and I would like to get some help. Since I am quite a beginner, I would like a simple answer:) But any help will do great.
Thank youI've looked at the IP adress, and it started with 169.
This means you aren't actually connected to the Internet; only to your router.
An easy first attempt at a fix is to turn your router off and then on again. -
I have a good connection thru both wifi and ethernet but cannot get to the internet
I have a good connection thru both wifi and ethernet but cannot get to the internet
Which model iMac do you have? Which OS system is currently installed on your comp?
-
Connected to router but cannot get on the internet
Hi,
I have connected my sons laptop to home hub 3 and it is showing connected to router but when we try to connect toonternet we get error message,have tried connecting to lots of different web pages without any joy.
Laptop will connectto other wireless when we are not at home. Really not sure where we are going wrong.
Can anyone help?
ThanksCouple of things to check:
1) Are you using the wireless passkey that is on the Homehub label to log on with?
2) It could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
Once done try and connect to internet. -
Can't Connect to the Internet WRT54G
I've been having connection problems for about a month now. Originally the internet would go out for an hour or two, but it has steadily become worse. It has been out for three days now. I called my ISP every time I couldn't resolve the issue, or I'd wait awhile and the issue would resolve itself. Originally my ISP thought the splitter was causing the trouble, but I removed the splitter and I am still having the same problems. The only way to get a connection is to hook the modem directly to my laptop via an ethernet cable and cut the router out of the equation. I tried calling Linksys support, but they wanted me to pay a thirty dollar service fee to make my router "new" again. It is extremely hard to understand what they were saying because of their accents (linksys has outsourced their support to India). So I come here on humbled knee to resolve this issue. Does anyone have any suggestions on what to do? It is a wireless WRT54G, it is several years old, it may just be a matter of buying a new router?
Unplug the power cord from the router, wait a minute, then plug the cord back in.
If this does not work shut down your system.
reboot modem
reboot router
start computers
If this does not work reset your router to factory settings by using the reset button in back of router. Wait 30 seconds and log in to your router and reprogram router to personal settings.
Greetings from Northern Ontario, Canada -
Around 10/10/08 I began experiencing this problem where my computer will randomly reboot itself, while using the internet. As long as the wireless network adapter is unplugged, there is no problem. This is also happening to my roomate's computer who is on the same wireless network as I am. We have been using this for over a year with no problems until now. The event log reveals this error code (see bottom of page) and from what I've been able to find out, it seems to be related to hardware/driver incompatibility possibly due to a BIOS update. I tried to download a new driver, but its a binary file and not a zip file like the website says. I don't know what I'm doing... please help.
Server=watson.microsoft.com
UI LCID=1033
Flags=1696080
Brand=WINDOWS
TitleName=Microsoft Windows
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
ErrorText=A log of this error has been created.
HeaderText=The system has recovered from a serious error.
Stage2URL=
Stage2URL=/dw/bluetwo.asp?BCCode=1000007e&BCP1=C0000005&BCP2=F4EDEC19&BCP3=F519EB70&BCP4=F519E86C&OSVer=5_1_2600&SP=2_0&Product=256_1
DataFiles=C:\DOCUME~1\jebus\LOCALS~1\Temp\WERd1ab.dir00\Mini101208-01.dmp|C:\DOCUME~1\jebus\LOCALS~1\Temp\WERd1ab.dir00\sysdata.xml
ErrorSubPath=blue
DirectoryDelete=C:\DOCUME~1\jebus\LOCALS~1\Temp\WERd1ab.dir00Try this link you may get some information.
-
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Ok so i'm trying to restore my iPod but every time at a certain point the iPod software update would freeze and says to make sure i'm connected to the internet and I am. Help me please
Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.) -
My laptop joins the network I created and connects to the internet via my Airport Extreme but for some reason my iPad and iPhone cannot access the internet even through they have joined the network. What's gone wrong?
Troubleshoot Internet Connection Problems at Microsoft.com
* http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-Internet-connection-problems
You can also check the following:
* Your modem and/or router are both on and are not indicating errors. The problem may be with your Internet Service Provider (ISP). Contact your ISP for more information.
* If you are using a wireless connection, that you are using the correct access point.
* Your Domain Name System (DNS) server translates web addresses (URLs) into IP addresses and is usually provided by your ISP. If the DNS server is overloaded, you may be unable to view some or all websites. For example, if http://74.125.53.99 or http://74.125.159.105 work but http://www.google.com doesn't, you may have a DNS problem. You can use an alternative service such as OpenDNS (http://www.opendns.com/) or Google Public DNS (http://code.google.com/speed/public-dns/).
* Whether your Internet security software (including firewalls, antivirus programs, anti-spyware programs, and more) is blocking connections to the Internet. For instructions on how to configure some programs, see the Firewalls article (https://support.mozilla.com/en-US/kb/Firewalls).
Check and tell if its working. -
what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network
My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router. -
What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?
When you click on the WiFi network name, have you also provided the password for accessing the network? You should get a dialogue box asking you for the security information the first time you connect.
If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad. See if it now connects correctly. -
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
OS snow leopard and above...Do you have this problem with all websites, or only some? If only some, which ones?
Maybe you are looking for
-
Upgrading MacBook Pro Hard Drive - cannot get Windows partition to work
Hello, The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't rea
-
i was trying to update pages and keynote in my ipad 1 generation and it say that is not compatible so i erased them and try to install them again and it say the same thing ? Is that because i havent update to the new ios5 or is not compatible anymor
-
How to Export/Import/Create a VM with an existing OS-Drive.
How do I do the same things that these Power Shell command do with the REST-Based API? Export-AzureVM Remove-AzureVM Import-AzureVM New-AzureVM Eventually I want to be able to export and import Virtual machines in a similar way to this: Export and Re
-
Master Data Creation/Maintenance Automation for ECC to SNP
We are starting an SNP project using SCM 7 and ECC 6. We use PP/DS and G-ATP but have maintained our PPM's in APO only all these years. This will be our first time to leverage ECC data for an APO use in either PPM or PDS functionality. We have targ
-
Help! Accidentally deleted my Windows 8 partition. Can I recover it?
Hi all, I have a bit of a problem. While I was trying deleting/formatting a USB stick connected to my rMBP, I accidentally selected the windows partition on my HDD instead of the USB. I then preceded to rename and click "erase," just before realising