Connected to Internet but can't Browse-Rig​ht out of the Box!

Hello, I am having trouble loading web pages when connected to the internet via wireless (LAN works fine).  My network sharing center says i'm connected to the internet and when i troubleshoot it finds no problems. Occasionally the google or youtube homepage will load, but no more than that. An error message is never displayed either, the web page simply loads forever until i close out of it. Something odd I've noticed is that, if i cut the wireless on my laptop off then back on, I have around 30 seconds of browsing freedom--everything works; however, after that it returns to endless load times. All the other laptops in my house have no issues with the wireless. Anyways, I've looked for solutions all over the internet and none have fixed this problem. I just received my Lenovo t530 yesterday and this was a problem right out of the package. I hope someone can help.

Peytizzle,
Try changing the Channel in the wireless router and see that helps. Also do you have those "N" router? Can you try using only a/b/g?
Also if you have Channel set to "Automatic" can you try setting it into 1 channel only rather than leaving it in Automatic.
Let us know
Thanks
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Similar Messages

  • HT4623 My iPad will not update, says not connected to Internet, but I am browsing support online.

    my iPad will not update, says not connected to Internet, but I am browsing support online on this same iPad?

    Can you update via itunes on computer?

  • Can i reset N8 to out of the box condition?

    Hi everyone,
    I was thinking of restoring nokia N8 to "out of the box"(just purchased) condition. As we know that a soft reset(*#7370#) along with a factory reset(*#7780#) does exactly the same thing in a s^1 phone and one doesn't loose anything that comes as a part of firmware(or as i understand, please confirm/clear if its otherwise).
    But in case of s^3 devices(came to know from a sticky thread above), its not the case and one looses some stuff that came preloaded on the phone(should be part of the firmware as far as i understand).
    So what i want to know is the consequences of (i.e. what i loose from my phone):-
    1. Performing a *#7370#
    2. Performing a *#7780# 3. Pressing the power key for 8 secs
    On a nokia N8.
    I want to restore the original folder structure and keep my device neatly managed(a bit obsessed to keep things in order, though i'm not suffering from obsessive compulsive disorder, lol). So please help me to achieve this.
    [N.B: i don't want to go to nokia care point to get this done, or to get stuff reloaded if i loose something that came preset].
    Thanks for patience.

    @Roshanrims
    Last observations are that not surprised N8 so cheap on pre-owned market as who can be bothered faffing around (after three finger power on reset to remove data) when selling to try to get it back as it should be.
    Be aware that irrespective of "Hard reset" or re-flashing firmware whenever OVI Store is opened again on N8 it asks are you "username" and asks for password! 
    Have always found that after "hard reset" always seems to fail initial prompt to sign in to Nokia account with "try later" but that maybe because in marginal mobile reception area.
    Long as you copy any .dcf material off mass memory it can always be restored later.
    Happy to have helped forum with a Support Ratio = 42.5

  • Can connect to Internet but can't open any web pages

    Hi there helpers, I was on my iMac this morning and everything was fine. I could open any browsers and it could load pages very fast, but after I downloaded and tried to install Xquartz ( recommended by apple) I went on my browser again any tried to open Facebook but it didn't work all it said on the browser was NO DATA RECEIVED. I thought it was only Facebook so I tried google but it wasn't, it was all of the websites. So I'm not sure if I've accidentally downloaded a virus or malware. By the way I use google chrome to do the things above but I did do it again in safari. Thanks

    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • I'm connected to Internet but can't connect to app store?

    I'm connected to the Internet but then can't connects to app store. Why is that?

    Did any one set restriction to App Store?
    Settings>General>Restrictions

  • Nokia 5800 connected to WLAN but can't browse the ...

    wassup! peeps.
    recently I can't browse the web or use any free messaging apps such as Nimbuzz on my nokia 5800 (fw version 21.0) finland made, but clearly indicates that it's connected to WLAN...the ones I used before (in my home & @ my work).
    I noticed it started when I was waiting for a video in youtube to finish buffering, then halfway to it it suddenly went back to my main screen. when i tried again, same thing happens. then i try to log-in to facebook or any website... first it will give the impression that its connecting but then, juz a couple of seconds or less, it willl suddenly revert back to my phone home screen.
     this started a couple of weeks back, and now the bluetooth too is f***ed-up!
    because my laptop can't see it, while yesterday it can.
    it seems that mines the first one with this kind of problem bcoz i can't find any forum discussing this issue.
    anyone who can help will be worshiped forever...thanx!
    Solved!
    Go to Solution.

    You could also try to clean privacy data inside the browser, and reset your device by taking out the battery for a couple of min and set it back again.
    Last resort: Soft reset it by dialling *#7370# (this will delete contacts, messages and everything else on C, so make a backup using PC suite) and do a format of the memorycard. - Then you start out with a fresh device.

  • Can connect to internet, just can't browse web

    Hi,
    After installing Arch, I was able to upgrade all packages with pacman fine, as well as get Xorg and Xfce working fine.  When I logged in and fired up firefox, i got an "Address not found" problem.  I installed epiphany, and it doesn't work there either, though links does, for some reason.  I don't know what configuration files or infromation you need to know (sorry ), but I can give you whatever you need to help solve this problem.
    All help on this is greatly appreciated    
    -jhl

    Hi guys,
    I recently came back to a box with Arch installed.  It worked fine until I ran
    pacman -Syu
    After I reboot I could still access pacman and use links to get webpages, but any other browser turns up a "can't connect" error like the OP's post.
    I reinstalled Arch with the latest x86_64 isolinux iso, and the problem persisted. I also tried the first suggestion, it changed it to 0 but again the problem persisted.
    So here's the input that you requested:
    [sharpie@machinelinux ~]$ route -n
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    192.168.0.0 0.0.0.0 255.255.255.0 U 204 0 0 eth2
    0.0.0.0 192.168.0.1 0.0.0.0 UG 204 0 0 eth2
    [sharpie@machinelinux ~]$ ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:14:C1:xx:xx:xx
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17 Base address:0x8000
    eth1 Link encap:Ethernet HWaddr 00:14:C1:xx:xx:xx
    BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:18 Base address:0x8000
    eth2 Link encap:Ethernet HWaddr 00:1B:B9:xx:xx:xx
    inet addr:192.168.0.65 Bcast:255.255.255.255 Mask:255.255.255.0
    inet6 addr: fe80::21b:b9ff:fef9:7d2e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:134441 errors:0 dropped:0 overruns:0 frame:0
    TX packets:87953 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:192205005 (183.3 Mb) TX bytes:6527205 (6.2 Mb)
    Interrupt:27 Base address:0xc000
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
    [sharpie@machine ~]$ cat /etc/resolv.conf
    # Generated by dhcpcd from eth2
    # /etc/resolv.conf.head can replace this line
    nameserver 192.168.0.1
    # /etc/resolv.conf.tail can replace this line
    Also, my rc.conf file:
    [sharpie@machine ~]$ cat /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="UTC"
    USEDIRECTISA="no"
    TIMEZONE="America/Phoenix"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="machine"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth2="dhcp"
    INTERFACES=(eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network netfs crond alsa hal fam gdm)
    Thanks for all input on this guys.  I'm currently reading man route to see if the answer's there.
    Last edited by sharpie (2009-06-18 20:01:00)

  • Airport Express - Can't get started right out of the box.

    First off I have Desktop with Windows XP SP3 and a Linksys wireless router and I don't know a whole lot about computers. I planned on using the Airport Express on an existing wireless network. My computer doesn't have a wireless modem but it's connected to the wireless router (just like it shown in the manual).
    Installed the software (even got the new update), plugged in my Airport Express and hooked it up to the stereo. I opened up the Airport utility and it can't find the Airport Express. I read the instructions to join the wireless network for Windows. It says to hold the pointer over the wireless connection icon until you see your Airport network name (SSID), and choose it from the list. I don't have a wireless connection icon. I can connect my work laptop to the wireless router with no problem. What have I done wrong?????? I need help before I send this thing back.

    Welcome to the discussion area!
    If AirPort Utility cannot find the AirPort Express, hold in the reset button on the Express until the amber light blinks quickly, hold a few more seconds, then release.
    Try temporarily connecting an ethernet cable directly from your computer to the AirPort Express to see if AirPort Utility will locate the AirPort Express that way. Assuming you get a connection, click "Continue" to follow the guided setup to configure your AirPort Express.
    When asked how you want to use or configure the device in your system, choose the "Join a wireless network" option.
    Once you have the Express configured and updated with new settings, you can disconnect the ethernet cable and locate that Express where it will be needed.

  • Can connect to internet, but can't find other computers in my network.

    I have two macs that connect to the internet via an Airport Express unit (which is setup to connect to the internet using DHCP and share a single IP address using DHCP/NAT). My problem is that the macs cannot seem to find each other in the network.
    How do I setup the network so that I can share the internet connection between both macs and at the same time connect from the one mac to the other? Is that even possible with an Airport Express unit?
    I have two more Airport Express units. Can I configure one of those to act as the local network bridge (or whatever the technical term for that is)
    I really just want to get all my macs to talk to each other, but I cannot for the life of me figure out how All help would be greatly appreciated!

    Never mind... I'm stupid... File Sharing was off... d'oh! It all works now

  • Connected to internet, but can't find server.

    I have an 8gb 1.1.4 software. I have a wireless router in my house and I entered the password correctly, it says I am connect in the corner but when I go to Safari it says can not find server.

    Exact same issue as my daughter had with her 1G Touch. Tried all suggestions found in this forum since mid-summer, and no luck. She sent it in to Apple for a replacement, and same thing with the new one. She has DSL with a modem/router from her provider and a Linksys wireless G, and her HP laptop connects wirelessly with no problems. We spent an afternoon trying different modem/router and Linksys settings and no help. I finally called her provider and complained that not only was the iPod touch unable to connect, but neither could the PS3, Wii, or Nintendo DS. They immediately OK'd a switch out of her Westell DSL modem/router with a new Zone. Everything now connects with no problems.
    This is probably not your solution, but, boy, it sure worked for her.

  • Desktop not connecting to Internet but can use wif...

    I have bt hub attached to my desktop which is not allowing me to connect to the Internet.
    But all the time the wireless devices are still working.
    I have phoned bt and they say that my computer is not connecting to the hub and I may need to replace the computer or it will be a shop job.
    I am desperate for any help as I have a final exam next week and the practice papers are all interactive on the Internet!!
    If anyone has any ideas I would be very grateful!! Thanks.....
    Solved!
    Go to Solution.

    I'd read something like this - http://pcsupport.about.com/od/fixtheproblem/ht/upd​atedriverxp.htm
    If this fails, I may blow the dust off my XP PC and take a look at mine as it's been such a long time since I've updated it, I've forgotten myself!
    -+-No longer a forum member-+-

  • IMac won't connect to internet, but can on internal network

    Hi,
    I've tried resetting the router and various other things that I found on the internet.  I know its not a router problem as I am using my MBP to post this discussion.  It won't even connect to the router's internap page.  Any thoughts?

    With the iMac failing to open any web page outside of your network, then I would be checking the DNS setting in System Preferences > Network > Wifi > Advanced. Compare what you have here to what the MBP has set.
    But with the iMac also failing to connect to the routers internal web page then you've got additional problems beyond DNS. Using the MBP as a reference, if you make a note of the TCP/IP network settings in the Advanced section as shown above, is the iMac using the same? (apart from the IP address which should have the last number set to a different value).

  • I baught a 32g i pod touch. but it only has 28.6g out of the box. what's up with that?

    I baught a 32 GB ipod touch from best buy. I took it straigh out of the box and it only has 28.6 GB of available space. why is that. i baught a 32 gb not a 28gb! lol why do i only have 28.6 GB?

    christopherfrommanhattan wrote:
    I baught a 32 GB ipod touch from best buy. I took it straigh out of the box and it only has 28.6 GB of available space. why is that. i baught a 32 gb not a 28gb! lol why do i only have 28.6 GB?
    See Here...
    https://discussions.apple.com/message/12289884#12289884

  • Connected to WRT54GsV4 but can't ping or browse

    I have a very interesting problem I am working on for a friend. They have 3 computers in the house they are a vaio laptop with Vista, a macbook, and a HP desktop with Vista. The vaio laptop connects and surfs the internet fine, so does the macbook. The desktop which is wireless like the others will connect to the router, show it has local and internet connection but can not browse the internet or ping. I also can not access the router by going to the default gateway shown by IPCONFIG. IPCONFIG also shows it connected to the DNS and has an IP but it still can't get on the internet. I have tried just about everything. We have used a USB wireless adapter and 2 different wireless NICs all to no avail. One thing that I noticed is that on the vaio laptop it shows it connected to Linksys. On the desktop it shows Linksys as the SSID but when it connects it adds _SES_### which I thought was very odd. I have ran through and reset the tcpip and flushed the DNS all to no luck. We ran a system restore back to a week before when it was working, no luck someone please help!!!!!

    I did not try to ping 4.2.2.2. I just know I can not ping comcasts dns servers. I have updated the firmware on the router and it did not work. The computer was able to access the internet until about a week ago, I don't understand what could have changed that I would now need a static DNS.

  • Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure?

    Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure?  any suggestions ?  verify disk says its OK

    iOS 4: Updating your device to iOS 5 or later - Support - Apple
    iOS: Unable to update or restore - Support - Apple
    iTunes for Windows: iTunes Store connection troubleshooting
    See if any of these three may help.

Maybe you are looking for