Connected to my existing network, now how to get the IP to print?

So I went to the Apple Store today and bought an AirPort Express to use solely for wireless printing.
Here is what I did:
* I added the AirPort Express's MAC address and AirPort address to my AirLink 101 router's MAC filtering list.
* I first tried the Setup Wizard to "add to an existing wireless network." I got the amber flashing light which was a bummer.
* Reset the AirPort Express to factory settings.
* Then I instead used the instructions to do it using the AirPort Admin Utility.
* After using the Admin Utility for the setup, my AirPort Express shows the green light indicating that it has joined the network and now has an IP address. (Yay!)
Now the AirPort Admin Utility will no longer detect the AirPort Express even though the AirPort Express is 4 feet away, with a solid green light -- so I can't confirm what the IP Address is of the AirPort Express to be able to setup the printer (the default 10.0.1.1 doesn't work). I've tried re-scanning as well.
Also, it doesn't seem my router gives a listing of all the IP addresses of the components connected to it.
Help??

Nevermind! I figured it out.
I installed Bonjour for Windows and it found it straight away! Fantastic!

Similar Messages

  • How to get the Double-sided print in SMARTFORM?

    Hi Folks,
    Can u  explain me , how to get the Double-sided print ?
    I create two pages : Page 1 and Page 2.
    Page 1 contains Main Window and some text data in it.....
    Page 2 contains  a secondary window with some TERMS & CONDITIONs data.
    Print Mode Settings:
    Page 1     Print Mode : D
    Page 2     Print Mode : Space
    I maintained all the above in my Smartform ,
    but i couldn't get my second page at all  and Double-sided print also....
    Is there any settings missing or any to be maintained ?
    GIve me a Solution....

    HI Surender,
    Check this one
    http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/90edfc78-dfc9-2b10-dcbe-d4612972ceb9&overridelayout=true
    Regards
    Ram

  • How to get the country to print when printing envelopes or labels

    Has anyone figured out how to configure Address Book so that the country field can be printed on envelopes or labels? Haven't found any pref or setting to get it to show up on those items.
    OT

    Duh! I didn't see the checkbox for printing Country. Really have to get my glasses checked.

  • How to get the record count printed for the report in the Dashboards

    Hi,
    I would like to get the record count printed at the bottom of every dashboard report like:
    < 1 - 25 of 6300 > instead of < 1 - 25 >
    Any help is appreciated
    Regards
    B

    I have tried the following formula which identifies the lowest grain but it does not seem to give me correct result.. I am not getting the correct count. I am getting as 3.A work order can be updated only once at one point of time.hence the formula
    MAX(RCOUNT(CAST("SR Wo Fact"."Crm Wo Number" AS CHAR) ||CAST("SR Wo Fact"."PSC Timestamp" as char)))
    I tried only MAX(RCOUNT(1)), but I was able to get the record count as corect for Administrator but not for other users.
    Has anyone come across this scenario.
    Thanks Shravan
    Edited by: 786443 on Aug 19, 2010 10:22 AM

  • Every time I try to connect to my 2TB Airport Time Capsule I get the following msg - "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and

    Every time I try to connect to my 2TB Airport Time Capsule I get the following message "The server may not exist or is unavailable at this time.  Check the server name or IP address, check your network connection, and then try again."  However, if I unplug it and then plug it in again, I can connect to it.  How can this be corrected without having to unplug it all the time?

    Are you using Yosemite??
    This is stock standard yosemite bug and we have no simple fix for you..
    You can fix it at its source..
    Hack in DNS from Mavericks.. so Yosemite can be raised to a level of reliability above GHASTLY.. !!
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    Apple still have not fixed it.. and users are now sick and tired of the problem.. so have resorted to what can only be described as extreme measures.. in fact I wonder why people don't just revert to Mavericks.. or earlier.. whatever OS was reliable.. instead of seeing the latest greatest update as necessity.

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    you may be connected to the wireless network but the question is the internet working properly on the wireless network...
    what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

  • Connect TimeCapsule to existing network

    My parents have an old G5 iMac with no airport built in.
    They do have a Time Capsule (connected with ethernet to their computer) with which they like to connect to an existing wireless network (different modem/router).
    The iMac and modem cannot be connected via ethernet; they are too far apart. I tried to let TC 'connect to existing network' but that was not an option.
    I only saw:
    - create new network
    - expand existing network.
    If I choose the expand option, it finds several networks from the neighboarhood, but not their own. (The network does works wirelessly - I have no troubel connecting to it via my iPhone, anywhere in the house). Apparently the current network does not allow expanding.
    Is there anything I can do just to let the TC join the existing network? And if so, will it still work well with Time Machine?
    Thank you very much!

    There is an issue with the MAC address of clients being hidden.. Apple was technically correct to leave it off.. but for home usage.. which after all, these devices are for.. they are not business products.. then I don't really care if the MAC addresses of the clients are hidden behind the repeater or not. The Express with one port effectively could still have the issue.. if you plugged a switch into it.. but Apple let it pass.
    In the end it is as much about business as about technically correct method of operation.. after all.. if they can get you to buy yet another product who is winning??

  • Airport express connected to my existing network - Can I connect a device to the network through it's ethernet port?

    Is it possible when my airport express is wirelessly connected to my existing network - to connect a device to the network through it's ethernet port or is it wireless only at that point?
    I'm trying to connect my A/V Receiver in another room to my network without having to run a CAT5 cable all the way to the router.  I'd rather be able to connect it to my airport express if it will work that way.

    Is it possible when my airport express is wirelessly connected to my existing network - to connect a device to the network through it's ethernet port or is it wireless only at that point?
    Yes.....IF
    You have an AirPort Express 802.11"n" version configured to "join a wireless network" and you have enabled the option to "Enable Ethernet Clients"
    Or
    You have an AirPort Express 802.11"n" configured to "extend a wireless network" from another Apple "n" router, in which case the Ethernet port is enabled by default

  • HT4262 I have two networks one each in two cities.  Both are named the same but require different passwords. I am at my second location but cannot connect to his wifi network. How do I delet one network so I can connect to my second network?

    I have two networks one each in two cities.  Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?

    Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
    Select them and tap the - button below it.
    Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
    Start with a clean slate.

  • HT4061 my brother have sent me a iphone5 in Bangladesh, now how to unlock the phone, because cellular not connect

    my brother have sent me a iphone5 in Bangladesh, now how to unlock the phone, because cellular not connect

    Send it back to your brother & have him get it officially unlocked, because there is no way for you to do that.
    Only the carrier an iPhone is locked to can authorize the phone's official unlocking, & most(if not all) will not authorize such unless your are a customer that used the phone on their network...obviously not you.
    So, send it back to your brother & have him get it unlocked or return it for a refund.

  • HT200131 I am trying to enter my network password and when I have entered the password for my network, I don't know how to get the remote to select submit.  Please help

    I bought an apple tv some time back and am only now trying to set up the wireless internet connection.  I can see my network but when I enter the password with the remote, I don't know how to get the remote to submit the password.  Could you please tell me what to do?

    You have to use the right arrow on the remote to navigate all the way and highlight the submit button.

  • Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images

    Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images - and at times - videos don't load.  I've increased / deleted Cache.  Suggestions? Misconfig?  Could it be possible my configuration from MacBook to router isn't correct?
    Thanks!

    JG,
    Thanks for the info.
    Couple of questions. I found an apple support document on this topic that opened with this line:
    "AirPort Express and all AirPort Extreme base stations can use WDS. Earlier AirPort base stations can't."
    If the TC is an airport extreme base station, why can't this work to extend the network? I think I misunderstand. Here is the full article:
    http://support.apple.com/kb/HT2044?viewlocale=en_US
    If I buy a new airport extreme, set it to wireless-n only as my main router, am I correct that my existing time capsule could be used as a bridge if plugged in upstairs?
    Final question (and that should do it), could I take this old airport express, plug it in upstairs using the ethernet connection, and just create a separate wireless network to use with a different name?
    I'd like to keep one network if possible but just kicking around short term solutions.
    Thanks again.

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1  I'm stuck, any help greatly appreciated.  (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

    AMoriyama wrote:
    I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
    I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
    I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
    All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
    Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
    At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine.  By clicking on it you can navigate through it any way you like, just as you would normally.
    Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
    - or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

Maybe you are looking for

  • Safari takes ages contacting websites

    I have recently purchased a macbook pro. I also have a powerbook g4. Both are used on the same wireless network but for some reason the powerbook loads pages much faster in safari. The macbook pro seems to stall when prompted to load a page for examp

  • Can't figure out problem with new PC

    Hi all, I just built my first PC and everything's running pretty well with the exception of some lag and freezing.  My mouse and keyboard sometimes lag behind my true movement.  The mouse does this more often and will lag behind for a second before i

  • CV01N - Document link to a file in the network drive

    Hello, i have a question regarding transaction CV01N. Not a document should be uploaded, but a link should be created. The link is to a file in the network drive. Is this possible? Where can i do the configuration to a network drive? Regards

  • ITunes finding media in mass storage device

    I moved all of my iTunes music to a mass storage device. How do I get iTunes to find it?

  • Can't install adobe digital editions

    Hi, I can't install digital editions, when i do it asks for administrator password, but i am the administrator and when i put in the password it won't work, i try my username with it as well (instead of administrator) but still nothing.  Any ideas? T