Connected to network but cannot use internet

i am using ipod touch 4g, i can connect to my home network but i cannot use the internet...it said "not connected to internet" but the ipod touch shows that it is connected to the network.
I know that there are nothing wrong with my home network,because i can connect to my laptop and others wifi devices.
Please really need help here...thanks

xGutsx wrote:
i am using ipod touch 4g, i can connect to my home network but i cannot use the internet...it said "not connected to internet" but the ipod touch shows that it is connected to the network.
I know that there are nothing wrong with my home network,because i can connect to my laptop and others wifi devices.
Please really need help here...thanks
You state that "there is nothing wrong with your home network because you can connect to your laptop and other wifi devices". Interpreted literally, this means only you have a local wireless network. Can your laptop and other wifi devices on your home network access the Internet without problems?
Do you have "reasonable" values for IP Address, Subnet Mask, Router IP, DNS, etc on your iPod Toucg 4G in Settings > WiFi > your home network?
By reasonable I mean do they look the same as the IP Address, Subnet Mask, Router IP, DNS, etc on your devices that can access the Internet?

Similar Messages

Airport Express working, PC connects to network but cannot use internet

I set up my Airport Express wireless network, and all is functioning. My IMac recognizes and uses the network. My PC laptop recognizes the network (excellent signal) and "connects" or indicates that it is connected, but I cannot access the internet. Have tried the power-down and re-booting sequences suggested in other posts. Does the PC just not work on a Mac wireless network?
Thanks.

Ok, time to use the Ping tool for some additional troubleshooting. We will need to open another command window.
1. Ping the loopback address to verify that TCP/IP is installed and correctly configured on the local computer. To do this, type the following command: +ping 127.0.0.1+
If the loopback test fails, the IP stack is not responding. This problem may occur if any one or more of the following conditions is true: a. The TCP drivers are corrupted, b) The network adapter is not working, or c. Another service is interfering with IP.
2. Ping the IP address of the PC to verify that the computer was correctly added to the network. To do this, type the following command: +ping 10.0.1.3+
If the loopback test succeeds but you cannot ping the local IP address, there may be an issue with the routing table or with the network adapter driver.
3. Ping the IP address of the default gateway to verify that the default gateway is working and that you can communicate with a local host on the local network. To do this, type the following command: +ping 10.0.1.1+
If the ping fails, you may have an issue with the network adapter, the router or gateway device, the cabling, or other connectivity hardware.
4. Ping the IP address of a remote host to verify that you can communicate through a router. We did this earlier when you attempted to access Google through the web browser using Google's IP address. This time, we will try it via the Ping tool. To do this, type the following command: +ping IP address of remote host+
If the ping fails, the remote host may not be responding, or there may be a problem with the network hardware between computers. To rule out an unresponsive remote host, use Ping again to a different remote host.
5. Ping the host name of a remote host to verify that you can resolve a remote host name. To do this, type the following command: +ping www.google.com+
Ping uses name resolution to resolve a computer name into an IP address. Therefore, if you successfully ping an IP address but you cannot ping a computer name, there is a problem with host name resolution, not with network connectivity. Verify that DNS server addresses are configured for the computer, either manually in the properties of TCP/IP, or by automatic assignment. If DNS server addresses are listed when you type the ipconfig /all command, try to ping the server addresses to make sure that they are accessible.
If you cannot use Ping successfully at any point, verify the following configurations:
o Make sure that the local computer's IP address is valid and that it is correct on the General tab of the Internet Protocol (TCP/IP) Properties dialog box or when it is used with the Ipconfig tool.
o Make sure that a default gateway is configured and that the link between the host and the default gateway is working. For troubleshooting purposes, make sure that only one default gateway is configured.
o Make sure that Internet Protocol security (IPSec) is not turned on. Depending on the IPSec policy, Ping packets may be blocked or may require security.
(Important: If the remote computer that you are pinging is across a high-delay link such as a satellite link, response may take longer. You can use the -w (wait) parameter to specify a longer timeout period than the default timeout of four seconds.)

Connect to wifi but cannot use internet

Hi. I stupidly downloaded and used ccleaner from the appetite and since using it my MacBook will let me use the internet even though wifi appears connected.I plugged in a cable from the router yet still no internet. Any suggestions on how I fix this?

Appetite = app store
And of course I switched router and Mac off and on 100 times before posting :)

Blackberry curve 9300 connected to wifi but cannot use apps only bb browser

hi guys im new here and its my first time to use blackberry unfortunately for me im very disappointed.. im already connected to wifi but cannot use any application like facebook,twitter,badoo etc.. i didnt try my bb messanger yet but im sure it wont connect as well.. Even my BB app world giving me error message "we cannot connect you to the app world please ensure that your device is connected to a wireless network and try again" what the???? im already connected to a wifi.. and the weirdest thing is that i can browse the internet using the bb browser and watch videos on youtube on the youtube app installed already to the phone.. but again the apps that i installed is not connected..
So what i notice the simple rebooting of the phone wont work i need to remove the battery and wait the phone to load then i can connect to app world but after few minutes... it will give the error message again..
Now im thinking to swap this phone and get another brand if this problem wont be solve whats the use of apps if i cant use it??! i already called my network provider and they told me i need to purchase package for data.. are you kidding me??! i got wifi why should i pay for data!
im sorry for the long message but im so disappointed and wants to solve this issue asap .. thanks..
my phone software:
v 6.0 bundle 2475 (v6.0.0.546)

Hello,
thank you for your message and sorry for the problems you have with your BB.
Have you checked your Firewall Settings and Application Settings, to make sure, that all apps have access to the internet and are not blocked? Also do you use the phone on BIS or BES, meaning do you use it personally or are you connected to a corporate enterprise server? In the last case, their might be restrictions from your server administrator.
I would try to go through all that and see if it works afterwards. Also go and check the application settings to make sure everything is correctly set up there.
The other thing I would look into is your router. Have you restarted your WiFi router as well? Checked on the Firewall there and everything?
As for the datapackage: There are several people here on the forums, complaining, that WiFi does not have priority over mobile data. This means, that if you have a dataplan and activate WiFi, you would still browse using your dataplan and not WiFi, unless you a) either turn off your mobile data connection, which makes you unreachable for calls, sms, etc. or b) if you are a prepaid user, wait until your balance is depleted, in which case the mobile data won't work anymore and you will connect through WiFi.
This is however different and should not affect you. Since you do not have a dataplan (at least that is what I understand from your posting), there is no dataplan to use and hence WiFi would have priority for connection with the net, since it is the only available source.
I would give it a bet, that it has something to do with your phones settings in any way, or with the router itself (though this is probably unlikely).
You can check your firewall settings by doing the following: Browse to your Settings Application or hit Options within any app. Go to advanced settings, check your security settings. You may also want to check your phones WiFi settings, by opening the connections app and open the WiFi configuration.
Hope that helps, sincerely,
Ben

Connected to home network, but cannot access internet on ipad

I have got strong signal on home network but cannot access the internet. Tried resets, etc

It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.

IPhone 4 - WIFI connection is made but cannot use the network

I have connected my iPhone 4 to my wifi network but the wifi symbol doesn't show up and it stays in 3G mode. When I disable 3G mode, the wifi symbol shows up but it will not allow me to access the internet. What could be wrong?
At first, I thought it had to do with my router settings but my neighbor has a iPhone 3GS and was able to access my wifi and get online with no problem. I used the same WiFi settings on my phone that my neighbor did and still have problems. Am I doing something wrong?

Skydiver has it surrounded. You have not successfully negotiated with your router. Take a look at the settings when you think it is connected, specifically the ip address. If it does not begin 192.168 then you have not been granted access. Do you have security on? Turn it off, and try to establish a connection, then if that works, turn it back on.
Or
Chose to forget the network, then re search and reconfigure. I am betting that is will ask you for a password, or a wireless key to make the connection. Mthe fact that both devices have the same symptom suggests the issue ismin how you are doing the router connection.

Can connect to network, but not to internet

I have a wireless network set up with four macs connecting to it. Three of the macs can connect to the network and access the internet.
My Black Macbook can connect to the network, but when I open Safari or any other program that connects to the internet I cannot actually get on the internet. For example, I open safari and after a few minutes it says I am not connected to the internet.
I can connect to my neighbor's unprotected wireless network and have no problem getting on the internet with that connection.
I have tried turning the computer off and on and turning the airport off and on and it does not solve anything. I did not do anything to the compueter, it just started this problem out of the blue.
Any ideas on how to fix this?

Do you have IP address limits ? Say I have 5 IP
addresses limit.
That is not it. And, I did not change anything before it just stopped working. The strange thing it is only within my wireless network that I can't access the internet. I eventually get the "you are not connected to the internet" screen each time I try to bring up a web page.

CONNECTS TO NETWORK BUT NOT TO INTERNET

Hello, PLEASE HELP
we are trying to get my wife’s computer connected to the internet.
We have an Airport Extreme network that i use for my G5/ OS 10.4.5... and she is using Windows XP Professional on her laptop..
The laptop connects fine to our home network... but will not connect to the internet via IE..
Do I need to download some kind of driver for the Airport to enable it to connect via windows ?
any other ideas ?
Thank you so much
IBM think pad Windows XP Pro
G5 Mac OS X (10.4.5)

After reading some of the similar topics on the
Board, I have taken the password off my system. still
no joy..the IBM thinkpad does not recognize the
wireless system.. and I have moved it next to the
airport to assure an adequate S/N ratio
You said before it was connecting to the wireless network, you are saying now it isn't?
Is the physical switch for the wireless in the on position?
next step is to try to get access by connecting a USB
cable to the rear of the Airport Extreme and then to
my wife’s computer..
do you think this may work better ?
Won't work, the USB port is for a printer.
You can use an ethernet cable from the LAN port and that should work.
Connecting a XP PC to a Airport Network via the LAN port of the AEBS
http://www.ifelix.co.uk/tech/1007.html
iFelix

New Macbook Pro Connects to Network but not to Internet

I just got a new Macbook pro and I transferred everything from my old macbook pro from a timemachine backup. The internet works fine on my old macbook pro (running 10.5.8) but if I turn on the airport in my new macbook neither machine can connect to the internet. It also makes the internet stop working on my roommates pc. All machines can see the wireless network, just not the internet. Tethering from iPhone works fine.
I've given both macbooks separate ip addresses. Restarted the modem. Run network diagnostics (the server and internet dots are yellow), deleted all other saved networks and restarted, but none of that is working. The new Macbook keeps crashing our internet connection.
Any ideas?
Thanks

You transferred your network PPC connection to your Intel OS X. Go to the blog How I fixed my dropping wireless Airport connection problem in Snow Leopard and follow there steps in resetting the preferences for the Airport card.
If the non of these steps work, take it to Apple ASAP.

IPod touch appears to be connected to a WiFi network but cannot use Wi-Fi for checking email and surfing the Internet.

hellpp

You may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest firmware from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Connected to the Airport Express network, but cannot access internet

I am using Airport Express (n) to create a wireless network in my apartment. It is connected via ethernet to a Motorola cable modem. My Macbook and iphone are on the network and I am able to connect to the internet without issue. I have a new Samsung N120 (wireless b/g) which finds and connects to the wireless network (Signal Strenth=excellent)but I am unable to connect to the internet. My Airport settings are for n, b/g compatible. The N120 has had no trouble connecting to other wireless networks. Samsung and the Cable Company can offer no insight, hoping for the Apple experts to help me figure this one out. Thanks!

Welcome to the discussion area!
Once you have the wireless connection established from the Samsung, have you power cycled your complete network? If not, power down every device including the Samsung DVD player. Order is not important.
After a few minutes, start the modem first and let it run a few moments alone. Then power up the AirPort Express and let it run a few moments. Next, power up computers one at a time for a few minutes and check to make sure that you can establish internet connectivity. Finally, power up other devices one at a time and check for internet connectivity.
Not sure what else to suggest as your post indicates that the AirPort Express is functioning correctly.

HP Photosmart Plus B210 connects to network but cannot enable Web Services

I am on my second HP Photosmart Plus B210 and neither printers have been able to enable Web Services.
When I try to connect I get "Cannot Connect to Server".
I have had my computer, router and printer settings checked by HP Support desk.
I have changed my IP Settings to manual and set up DNS settings as per the Network Config report.
I can print without connecting with a USB cable and I can see the printer on my internet browser but for some reason this printer cannot download Product Updates or enable Web Services.
In desperation, I have got another router - a BT Home Hub 2.0 (which I had spare) and tried this in case my Netgear DG834G Router was causing the problem but this has not changed / helped my problem. I still cannot enable Web Services.
Do I take up HP's offer of a 3rd printer?

Yeah, it is worth a try. I had my HP rep get me one ASAP...but its still silly on HP's part.
Its like selling you a car and saying, "Oh but if you want to use the radio, you have to buy this remote for it because the keypad on the stereo we provide does not work" .. "Oh and we dont include the special remote with the car"...
That's just not worthy of the brand "HP"

Vista PC's connect to network but cannot mount TC disks!!!!

I will start by saying that I have never had a problem with connectivity between my iMac and Macbook.
I have 2 PCs in the house running Vista. Both can connect wirelessly to the TC and access the internet through this without a problem. However when trying to connect the disks (TC disk and also one connected USB drive) I get an error.
Error reads "Unknown User, incorrect password, or login is disabled. Please retype the login information or contact the Disk's administrator (67)." I know the password I entered is correct.
TC firmware version is 7.4.2
File sharing is enabled.
Secure shared disks with TC password
AirPort Disk guest access is Read and Write
WIndows workgroup is set the same as on the Vista machines.
WINS Server is blank.
The frustrating thing is that it used to work just fine and it appears that this is a recent event (the kids have been complaining for a while and I have only just now got around to looking at it seriously).
When I first purchased my TC 9 months ago we were a Windows only household. There was never any problem with connecting to the drives. It appears that the connectivity has got progressively worse over time.
At one stage I dumped the Windows AirPort utility and just tried to manually map the TC and other drive within windows (i.e. select Map Network drive, enter IP address of TC and then select the shared name) This worked for a while but now windows will not even see the shared drives. The TC is visible on the network considering it is the point where the two PCs connect.
Does anyone have any advice on how to get the two Vista PCs to connect?

OK. I have had a closer look at things and believe I am closer to identifying the source of the problem.
It appears that I am unable to use the Airport Agent to mount the disks because of the (so-called) "smart" firewall in Norton 360.
If I disable the Norton firewall I am able to get the disks mounted (mapped).
Now I do not want to have to permanently disable the firewall just so I can access the disks.
Does anyone have any suggestions on how to configure the firewall so that it allows communication between the Vista PC and the TC? (i.e. any specific ports to open, protocols to allow, etc.)
It is also interesting to note that I get the same problem is I manually map the disks from within Windows Explorer (i.e. no problem with firewall disabled but constant invalid password with firewall active).

Connected to network but not the internet

Hi all,
Earlier today when I tried to get onto the web Safari wouldn't let me. It says I am not connected to the internet, although my airport has full bars. I was using the web this morning without any problems, this just suddenly happened. I have decided it is something to do with the computers wireless settings because I have it sitting right next to a Macbook Pro which connects wirelessly, as do 3 iPhones without any trouble, and I can use the internet when I have my Macbook plugged in via an ethernet cable.
I have repaired disk permissions, restarted a few times and tried to create a new airport connection without any luck. Network Diagnostics just says i am 'unable to join airport network'.
Anyone have any suggestions?
Thanks in advance
Tom

Hi all,
Earlier today when I tried to get onto the web Safari wouldn't let me. It says I am not connected to the internet, although my airport has full bars. I was using the web this morning without any problems, this just suddenly happened. I have decided it is something to do with the computers wireless settings because I have it sitting right next to a Macbook Pro which connects wirelessly, as do 3 iPhones without any trouble, and I can use the internet when I have my Macbook plugged in via an ethernet cable.
I have repaired disk permissions, restarted a few times and tried to create a new airport connection without any luck. Network Diagnostics just says i am 'unable to join airport network'.
Anyone have any suggestions?
Thanks in advance
Tom

Connected to wifi but cannot access internet

When I am in a public place that offers wifi, My ITouch 4th generation will recognize an internet connection but will not allow me to access the internet. When I go to my settings, there will be a connection box checked, and it will show signal strength, but when I try to check my email or something a box will pop up that says no internet connection available. Is there something else I am supposed to change in the settings when I am connecting to public wifi?

Many wifi places require you first to go to their webpage to accept the terms and conditions and to maybe enter a password. You need to find out how to log in for the wifi spot you are trying to use.

Connected to network but cannot use internet

Similar Messages

Maybe you are looking for