Connected to Network but still unable to use Wi-Fi

I have a 1st gen iphone 8g. I am connected to my home network and sitting right next to my router. The iPhone says it is connected to the network but I have no IP address or anything so there is still the edge symbol at the top of the phone. My friend with a iPod Touch is connected and having no problems, he is sitting right next to me. What gives?

What is the model no of your router ?
Are you unpluging the router from the computer or from the modem ?
If you are having problem going online wirelessly then readjust the wireless settings on your router and then try to connect your network on the laptop..
Go to linksys setup page...change the SSID(network name),channel to 11 and network mode shoul be mixed.
Also check for the security under wireless security and then try to connect to your network on the laptop.

Similar Messages

Can connect to VPN but still unable to use the internet

I have a MacBook Pro 5, 5 Running OS X 10.6.2 i have always been able to join my uni network and use the internet through VPN up until recently, I am not aware of any changes to my computer that could have caused this, i have had ICT Services at the University look at it and they have been unsuccessful, all the settings are correct and no other macs running 10.6.2 have this issue.
I am able to connect to the VPN and the sent bar in network preferences shows activity but there is no activity in the received bar.
What could the cause of this issue be?

I'm assuming you meant "10.0.60.1-50".
Those are 2 different subnets. The ranges you give for PPTP and L2TP should be on the same subnet as the network you are vpn'ing into, but not overlapping. - eg. if the internal network you are vpn'ing into is using a 10.0.50.x subnet w/ netmask of 255.255.255.0, the ranges could be something like this (this can vary, but I'm just giving you and example):
Internal network DHCP range:
10.0.50.1 - 10.0.50.50 / 255.255.255.0
L2TP range:
10.0.50.51 - 10.0.50.100
PPTP range:
10.0.50.101 - 10.0.50.150
As long as the clients logging in are initially on a different subnet themselves (ie. a home network using default 10.0.1.x/255.255.255.0, etc.), this should work.

Hi.. i have forgotted my password, then i did reset a new password.but still unable to use,i been go to i store outlet, the staff told me my apple id long did not use not active anymore , so ask me to call up office to activate back the apple id acount.

hi.. i have forgotted my password, then i did reset a new password.but still unable to use,i been go to i store outlet, the staff told me my apple id long did not use not active anymore , so ask me to call up office to activate back the apple id acount.

Hello, wnnsiau
Thank you for visiting Apple Support Communities.
If your account is disabled, see the steps in the article below.
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
If you have tried the steps above and this issue persists, see the article below.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

HT2204 Althrough I have updated my credit card information, but still unable to use the apple ID.

Althrough I have updated my credit card information, but still unable to use the apple ID.

If you are making use of a "subscription" desktop application the subscription has to be "active" (paid up).
Once your updated info is processed you'll be able to use the subscription application.
As Bernd wrote - Adobe Reader is free (download, install, use).
Be well...

HELP! Airport connects to network but still cannot get online

I have a g3 crt 400mhz running OSX 10.3.9. I added an airport card. It sees networks and connects to mine but when I load Safari or Firefox it errors out saying cannot find server. My main PC can see the mac so I'm not sure what I'm what else to check. do I need to delete .plist files. Can anyone help resolve this issue?
Thanks

Seems like you are not getting the DNS address or addresses.
apple > system preferences > network
Double click on network connection you are using.
Pick the TCP/IP tab.
Verify that you have a DNS Server. If you do not, look on your windows machine and see what the net address is. You can also pick using DHCF and still enter you DNS server address.
You can use harddrive > applications > utilities > network utility to diagnose the situation.
You can ping google.com. Result:
Ping has started ...
PING google.com (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
If that does work, try pinging 64.233.167.99 Result:
Ping has started ...
PING 64.233.167.99 (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
--- 64.233.167.99 ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
If pinging 17.254.3.183 works but pinging apple.com doesn't. You have a bad DNS Server address.
BDAqua suggests in a post.
Put these numbers in Network>TCP/IP>DNS Servers for a try...
208.67.222.222
208.67.220.220
Then try Safari.
not correct...
http://discussions.apple.com/post!message.jspa?messageID=5908432&5908432
Robert

Macbook already connected to wireless but still can not use the internet as other Laptop can use.

I just changed my Condo. Now I cannot connect my macbook to the internet even I already connect the wireless.
For other computer can use the internet when they connected to that wireless, except my macbook.
Please help to reply me.

I second this statement. However, before you go you should check "apple menu > system preferences > network"
Is your Airport visible here? If so, click on it and look for the "show Airport in menubar" checkbox.

I have reset my network but still unable to join the network...

i was on a website and the screen went dark, i couldnt open any other pages after that even when i tapped the screen i got no response so i went into my... settings... general... reset... reset network settings.
now my wi-fi is" not connect" and i am "unable to join the network" ...............what have i done!!!

Read what i wrote here and try it.
https://discussions.apple.com/message/20759061#20759061

TS2972 I have signed in with same Apple ID & same network but still can't use Remote app to control my iTunes via iPhone 4s or iPad2.

I have gone through FAQ and tried all methods and checked settings in my iMac and my iOS devices (iPhone 4s and iPad2) and still can't useRemore app to control iTunes. I have used this app without a problem before with my old iPhone 3 and it worked fine.
What is wrong with it?

Other than you have used it before and it worked - can you provide some more details? You don't see your iTunes library in the remote app?

My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My printer is connected to the network but is unable to communicate with computer

my printer is connected to the network but is unable to communicate with computer

Hi mdqprimitive,
Sry to hear about your wireless issues.
Can you please provide some further info. so we can better troubleshoot the issue you are experiencing.
What model is your HP Printer?
What model router are you using for your wireless network?
Print out a Wireless Network Test Report from the wireless menu of your printer's front panel.
What does the report show?
Did your laptop successfully discover the printer after installing the software?
Thank you

HT3562 I activated my voiceover and now i cannot enter my passcode to unlock my phone. phone has been disabled due several entering of passcode, phone says connect to iTunes but am unable since phone is still locked. kindly assist

I activated my voiceover and now i cannot enter my passcode to unlock my phone. phone has been disabled due several entering of passcode, phone says connect to iTunes but am unable since phone is still locked. kindly assist

If you have an iTunes backup that includes the photos you may be able to extract them from the backup using a 3rd party utility such as http://www.wideanglesoftware.com/ibackupextractor/

Photosmart C7280 connected to network but no print

Photosmart C7280 connected to network but no print. Trying to print from a new Mac Book Pro using Snow Leopard. Both computer and printer are connected to Time Capsule (router), but I'm unable to connect to the printer. I restarted computer after removing the installed printer, I have restarted printer after verifying it works. This is a new network setup. TIA Jim

How is the printer connected to the Time Capsule? Ethernet, wireless or USB?
Did you recently upgrade to Snow Leopard?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My apple 5th gen ipod is connected to wifi but still cannot access safari and other websites..can some1 help me out?

my apple 5th gen ipod is connected to wifi but still cannot access safari,itunes and other websites. the ip address is not strtng wid 169 and i have reset the network settings also..can some one help me out

The 169 IP address mans it did not correctly negotiate with the router:
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J

HT1595 apple tv will connect to network but not internet

apple tv will connect to network but not internet

I have unplugged the apple TV but it still says noat connected. However, it has accessed some movies but when I try to purchase or download from say netflix, it cannot.

Connected to Network but still unable to use Wi-Fi

Similar Messages

Maybe you are looking for