Connected to new Mac mini display doesn't work

Connected a new Mac mini to a 20in apple Cinema Display and display does not work

How are the two TVs connected to the Minis?
Tell us more about the "problem" TV.
Are the Minis in the same location with both TVs? I ask because maybe interference is causing the problem. If the Minis are in same location it cold be cause by interference generated by the TV

Similar Messages

  • How do i connect my new mac mini to the thunderbolt display

    how do i connect my new mac mini to the thunderbolt displa,  It arrives tomorrow?

    It has a built-in Thunderbolt cable, see here: http://www.apple.com/displays/specs.html
    So assuming your mini has a thunderbolt port (you said it's new so I assume it does), you'd just plug the display's thunderbolt cable into the mini's Thunderbolt port.

  • How can I connect a new mac mini to my old vga monitor? There doesn't seem to be a mini display port

    I have an old monitor with VGA port, and was wondering if anyone knows how to connect this to the new mac mini. Older mac minis have the mini display port, and if that were the case I would use the mini display port to VGA adapter, but this new mac mini doesn't have one. It just has the thunderbolt port or HDMI port for displays... I've been looking for an adapter to connect my display to one of these but cannot seem to figure it out. Any advice? Thanks in advance.

    The Thunderbolt port is the one to use; you use the same mini-DisplayPort adapter you used for the older minis.
    Regards.

  • Which adapter do I need to connect my new Mac Mini to my old Apple Cinema HD monitor?

    I have a perfectly good Apple Cinema HD monitor (model M8536), but it has an ADC connection, and my new Mac Mini isn't compatible with it. I've bought a new screen for the Mac Mini, but there are going to be times when I need to run two screens in parallel on the Mini. Can anyone tell me which adapter I need to do this? I've looked at the Apple DVI to ADC connector  (M8661LL), but I'm not sure this is what I need, and they're quite pricey, even second-hand on eBay, so I don't want to make a mistake!
    Thanks!

    Thanks, dwb ... unfortunately I don't think I'd get very much for my old display, it's so old (> 10 years)! But it still works perfectly, and I'm loathe to throw it away ... and there are going to be times when I need the two screens, so even though I've bought a new 27" Philips monitor, it would be good just to buy an adapter to hook up the old screen ...

  • Dropping WiFi Connections after new Mac Min and Upgrade

    First of all does anyone know why this discussion was archived when there was never a solution posted? 
        https://discussions.apple.com/message/12586041?tstart=0#12586041
    Secondly (why I found that thread among many others addressing the same problem). I received a new Mac Mini for XMas (cool, I needed it) which worked fine with my other computer and devices (2 iPads, 2 iPhones, 2 Win7 Laptops and 2 Win7 desktops) for a couple days, so I thought. Now all these devices got along very well until Mr. Mini comes along. Then I note wireless drops occasionally, it seemed to come back so I wasn't too upset, yet and decided to deal with it later and enjoy my vacation.
    Now, after I allowed Leopard to do its upgrade (I had deferred that) I now have all the above devices dropping wifi and physical LAN connections as long as this Mini is powered on. I shut it off, Internet is blazing, I turn it on, Internet falters and screeches to a halt.
    Since all my other devices have worked cooperatively for several years and this device comes along and crashed the party im pretty convinced its not my router or computers. I am not interested in trial and error here. i have many better more important things to do and this is Apples responsability to figure out. I am a very savy IT dude (career professional) and want to get to the bottom of this for everyone. 
    Soooo.... What changed? Why does this device kill my network when it is turned on (note, no alterations from out-of-the box to any network protocol or config.) and why does a thread (one of many) without a solution get trumped on by Apple?
    Apple?

    How to Create & Burn a Bootable Mac OS X Lion Install DVD
    Summary
    OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
    To redownload the installer on a computer running OS X Lion, press and hold the Option key while you click the Purchases tab. If the button to the right of the Install Mac OS X Lion item doesn't change to "Install" and allow you to download Lion, use Spotlight to search for "Install Mac OS X Lion" on your computer....
    http://support.apple.com/kb/HT4718

  • Wireless Keyboard don't connect with new mac mini

    Hi,
    I just received my new Mac mini server 2011 and bought an Apple wireless keyboard (already have a magic mouse). At first start up of my Mac mini picks up my magic mouse and I can use it but does not pick up my wireless keyboard? Is this normal? Am I missing a trick with the keyboard? Do I first need to use a normal USB keyboard to configure my Mac mini and then when Lion is setup it will install the driver for the wireless keyboard?
    Regards,

    I just bought new Mac mini w/ wireless keyboard and track pad. During initial setup it would not pair to keyboard but it di see trackpad. I could not complete setup, I have no control.  Brought home USB keyboard from work and resumed setup. I'm stuck again. In setup it's asking for a trackpad click to continue. The trackpad will scroll, but will not click. The whole system is two days old and nothing works  I tried to contact support through the lengthy online screening process and apple ultimately say the new system doesn't qualify for free support.
    Totally ******. I'm back to using my old pc..  What to do with this expensive boat anchor from apple?
    Really could use some help here
    Thanks

  • Wireless apple keyboard will not pair/connect to new mac mini

    So, I cannot complete setup and use the computer.  The keyboard IS discoverable by my macbook air.

    Same with my new mac mini.
    Got it brand new via the online shop.
    Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
    THIS ***** !!!
    No hint at all from apple that you first have to connect the USB keyboard.
    I had to borrowed a USB keyboard from my neighbour :-((
    After setting things up it was no problem at all to establish the BT connection with the keyboard.
    Works fine now.

  • Help connect my new Mac Mini with my stubborn HP Printer!

    I just got a used, but cleaned up Mac Mini. My HP Deskjet 6980 printer, worked flawlessly with my old G4. Right out of the box, i didn't need to install a driver, i just hooked up the USB ( most simple of the 3 connection options), and it worked fine. Now that i have a new Mac Mini, i hooked it up, it recognizes the HP printer in System Prefs, but when i try to print i just get page after page of strange code. I installed the printers' installatin cd (which, i didn't even need on my first computer), and It still won't print. Again when i hit "print"... just endless code.
    What can I do. I am not totally computer computer literate or familiar with all the terminology, so please, keep it simple. Thanks so much for your help.

    You don't say, but first thing we need to know is whether you have a G4 Mini or and Intel Mini. (Intel Mini has 4 USB ports on back, G4 has 2 USB ports.)
    If you have an Intel Mini, odds are you need to download the latest drivers for Mac OSX 10.4 (Tiger) from the HP site. The drivers on the old CD probably won't work right with an Intel Mac. And you may have to uninstall all the HP stuff you have already installed from the CD.

  • New Mac mini display issues

    My mom bought be a new Mac mini (new 2010 model) earlier today, and I've having a wee-bit of trouble. I'm hooked up via HDMI to my 32" HDTV and everything looks fuzzy--text on everything is rough, and pictures have low detail, so they look like paintings. I went to my display settings and put it on the highest setting (1360 x 768), but it didn't help. Is there another option I should try?

    First, look in the TV's picture adjustment menus for a picture mode control. See if it's set to "vivid" or "dynamic" or something similar. Change that to standard, normal, or similar. This will tone down the TV doing all sorts of outlandish "enhancements" to the signal being input from the Mac.
    Second, make sure that the sharpness adjustment isn't turned up significantly, as this will hurt the legibility of type on the screen. The lower the sharpness is set, the more readable the text will be. You'll have to strike a balance that you're happy with between text sharpness and a satisfying sharpness for the video content you watch. On my sony tv, I have the sharpness set at about 25%.

  • Can I use a airport express to get internet connection to a Mac Mini that doesn't have wireless by adding it to my existing wireless network?

    I bought a first gen Mac Mini for our daughter and it doesn't have internal airport adapter and was wondering if I got a airport express can I plug it in my daughters room and use it as a local router and just use the eithernet connect from it.  Or would a airport extreme work better for this job.  I have a wireless cable modem that we connect to.  I also have a second question I have a iMac G4 that picks up the wireless signal but will not connect to it does it have to be a Apple airport for it to work or should it be able to connect to any broadcasted signal.  Thanks for the help.

    I'm not sure I quite understand. Do you wish to use the AEX to provide a wireless connection for a device that has an Ethernet port but no wireless capability of its own? You wish to use it in place of a wireless card that isn't internally installed? If so, the answer is, "Yes." It will work as a wireless access point. But you must have an extant wireless network because the AEX won't have an Internet connection when used in this way.
    If you have an existing wireless network with a wireless router connected to your cable/DSL model or your modem is a wireless router as well, then the AEX may connect to it in bridge mode. Note that AEXs don't always play nice with non-Apple routers. Some work; others don't.

  • New Mac Mini display recommendations

    I need a display for my Mac Mini and I can't really afford one of those nice Apple displays. As you know there are hundreds of third party displays and resolutions. I would like to find something around 20"-22", DMI, and of course resolutions that are supported by the mini. Around $450-$500. The purpose of this system is drawing and artwork.
    Thanks,
    PickyBiker

    I agree with Stork. I'd love to have a couple Cinema displays. But my wife would kill me. But let me report on my experience with Dell.
    First. I'm a architect. And I do plenty of highend rendering. So I need a respectable display...or two. I was a bit leary of my first 20" Dell. I was looking at it as a "Throw away" But Six year later, its still solid visually. After that I started experimenting with other monitors (Careful to keep cost under $250). Two years ago, I got a 24" Acer monitor(1920X1200). It had incredible specs...and I use it for all my 3D models. Along with Cinema displays, I use it to compare all the other monitors that I buy. Then...I bought (2) 23" monitors. and I should have got the 24" with 1920X1200(my mistake) but they are still good monitors for dual display in my office.(I take expensive stuff home)
    I went to fryes and best buy to compare monitors. Put on your earbuds (to avoid the sales people) and go look at couple monitors at 45 degree angle. As Stork says, use your eye. And have fun.

  • Mac book display doesn't work anymore

    I normally use my mac book 2011 with an external display. However, for the past few days, the macbook display is not working. The computer boots up, but will only display on the external display with the lid closed. How do I fix this?

    Thanks for replying.
    Are you referring to an F2 key on the MacBook?  As in, "did I try brightening the MacBook display"?
    If so, yes I have.  If I. Completely darken (F1 key) then brighten the MacBook display using the F2 key, I get the same less-than-one-second result before screen blanking.  The display is actually still there, but completely inlit.

  • Wavy screen on a new mac mini

    When I connect my new Mac Mini to my Dell computer monitor it shows a wavy screen.  I took the mac mini to the apple store and it checks out along with the apple cable that connects the IBM cable to the mini.  It worked fine with a different monitor conencted to the cable and mac.  The monitor in question also worked fined when connected to another computer.  I have used tech support with no success.

    Complimentary AppleCare Support

  • HT1695 How do I link my iPad to my new Mac mini?

    I cannot seem to link my iPad to my new Mac mini. My iPhone worked automatically but not my iPad.

    Did you create a new iTunes account or update the old one ? If you updated the old account then you can tap on it in Settings > Store and log out of it and then log in with the updated version and it should get 'refreshed' on the iPad.
    If you created a new account then you can still log out of the old account and log in with the new one, but any content bought/downloaded via the old account will remain tied to that account (so only that account will be able to download its content or app updates).

  • How to connect my studio display with a Apple display connector to my new mac mini

    How can I connect my studio display with a Apple display connector to my new mac mini?

    https://discussions.apple.com/message/8315498#8315498

Maybe you are looking for

  • Itunes won't open - referenced memory error

    I too cannot get itunes to open. Keep getting an error message regarding referenced memory that cannot be read. The instruction is different each time - first it was 0x0b011200 then 0xf80114ed then 0x97011534 - then is has the click ok to terminate o

  • IPhone 5C cracked on the top and whole screen is broken? And i haven't dropped it and i got it a day ago

    my iphone 5C cracked when I waa holding it!! I got it a day ago and now the screen refuses to work

  • IE applet refresh problem

    I have a menu applet whose items are generated from a database query. The problem I'm having is that the applet will not refresh when the page is reloaded or the refresh button in ie is selected. Instead of the applet I just get the gray box. The jav

  • Advantages of third parth adapters

    Hi Friends, I would like ti understand the need for using I-Way Adapters. For Eg., If i want to do integration between mainframe and SAP i can do using File, JDBC adapters. Why do i need third party adapter? What advantages they will bring us? Thanks

  • Why won't ai just "Save"

    Sometimes when I'm working on an .ai doc - when I save it, it asks me if I want to replace the original? I'm talking about an file I've been working on, not a new one. I just go Comm Save, as always. It freaks me out a little! Why would ai ask me if