Connected to the internet but cannot get online

Hi,
I am unable to actually utilize the internet with some, but not all, wireless networks. In system preferences and on the icon bar on the top of the screen, I am told that I am connected to such and such a wireless network by my airport card. Yet, I am unable to actually go to any web pages or access mail.
I am using a G3 graphite clamshell. The particular network is via linksys.
Any advice?
Thanks.

Hi Norman, thanks for your advice.
This didn't help, sadly.
Further info:
I can connect wirelessly to other routers just fine, and i can connect to the router in question with an ethernet cable. Other macbook and phone can connect wirelessly to the router in question.
This happened a couple of weeks ago when the router was switched off by mistake during activity. Fixed by re-installing OS and rebuilding keychain and networks. Today, same thing happened, same reason. But not fixed by same route...

Similar Messages

  • After downloading ff4, ff will not launch. I am connected to the internet but cannot access any pages.

    I recently downloaded firefox 4 on to my linux based notepad. This is an acer aspire one. Since Firefox 4 installed I have been unable to access any internet pages, through luanching firefox browser or the search bar on my desktop. I am connected to the internet through my home wireless connection, so don't understand why not able to view pages.

    I have the same problem but can go on to some websites but not others. I have tried what was suggested about clearing recent history and also the proxy server but it hasn't resolved the problem.

  • I'm connected to the internet but cannot access my Apps

    HP Photosmart Plus B210a, Windows 7 32-bit operating system.  Previously been able to access my Apps but now getting a Server Connection Error - There was a problem connecting to the server.  I can print wirelessly and from the internet.  Not used it for a few months and the last change was when i changed the router to Virgin Media (everything worked then too) just before Christmas.  None of the online solutions have helped so far.

    zobo_76;
     I hope you are doing well and welcome to the HP forum;
    Thsi article may help http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&tmp_task=setupCategory&cc=us&dlc=en&la...
    also GO HERE to make sure this is not the issue;
    Let me know if I can help you any further.
    Regards;
    RobertoR  
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • I a connected to the internet, but cannot establish a connection to the server to watch an insructional video

    I am trying to watch an instructional video at artistsnetwork.tv, but I get the message Error: Timed-out trying to establish a connection to the server. I have no idea how to even BEGIN to fix this.

    If you did the following 3 steps in the link and saw the screen pictured in the link, you are communicating with the router you are connected to (yours or unlikely but possible, someone elses of the same brand that is also unsecured and within range):
    Step 1: Open a web browser and type the IP address of the WBR series router into the address bar (default is http://192.168.0.1).
    Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.
    Step 3: Click on the Setup tab at the top and then click on Wireless Settings on the left-hand side.
    The MAC address you are seeing may be that of a connected device rather than the router itself such as your Mac or your modem but I'm not sure what they are displaying.
    You can change the "Wireless Network Name" on the same page of settings to a unique name to be sure which router you are connecting to when you connect via wifi. That will also require you to reconnect as I have described below.
    Note that in addition to changing the security mode you will also have to enter a passphrase twice in the bottom section. That is the password you will need to enter in your mac to connect to your wifi when it is secured. It is also likely that after you press Save the router will disconnect you and you will need to reconnect using the password.
    Also note that as long as you are doing it you really should set it to WPA not WEP as WEP is not as secure. Quote from the same page:
    WPA is a strong form of wireless encryption, however not all wireless adapters support this feature. If your wireless adapter does not support WPA you will want to use WEP to secure your wireless network.
    If none of that helps, you may want to try a D-Link user forum as non of this is Mac specific and a forum devoted to routers is likely to be more helpful.

  • HT201320 My email account is set up properly, I can connect to the Internet, but I cannot get mail from the Mail app.

    My mail account is set up properly, I can connect to the Internet, but I cannot get mail from the Mail app on my iPad.

    Hello echo1946
    Start with the first article to troubleshoot the issue of not getting mail on your iPad. When you get online using safari, check to see if you can log into webmail. Also keep in mind, depending on the account that mail sometimes might not come in if it is a POP account as it may have already been download elsewhere.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Mail Settings Lookup
    https://ssl.apple.com/support/mail-settings-lookup/
    iCloud: IMAP
    http://support.apple.com/kb/PH2585
    Regards,
    -Norm G.        

  • When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

    you may be connected to the wireless network but the question is the internet working properly on the wireless network...
    what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

  • My ipad2  appears to be connected to the internet, but I cannot connect..I keep getting Safari cannot open the page because it is not connected to the internet....I restarted the router and the ipad still no connection...my service is working properly

    My ipad 2 appears to be connected to the internet(all bars are up in the left hand corner).....yet I cannot connect to the internet(Safari cannot connect open the page because it is not connected to the internet)
    I unplugged my router for 30 seconds and restarted my ipad...still nothing
    I really don't think it is my service because my laptop works fine...as I am using the internet right now
    I only had this ipad for 2 days
    Are there any suggestions that can help solve this problem?

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Showing as connected to the internet but can't get...

    Hi,
    This is my first post so apologies in advance if I'm using this incorrectly!
    I have BT Infinity and have had very few problems since getting it but for the last few days I have been unable to get online. I've called BT a few times and it is showing that I'm connected to the internet so they felt it may be an issue with the Home Hub so are sending me another. In the meantime I have bought another router and connected this to the modem etc and it is showing as being connected to the internet but I still am unable to get online. This is both when connected via an Ethernet cable or wirelessly and is the same across all devices (pc, ipad, iPhone etc). As I say, it is showing as connected to the internet but I can't get online at all. I can via BT Openzone so I know my various devices are working.
    I am almost certain the new Home Hub will not help. It's driving me mad. Any suggestions?
    Thanks in advance.

    If as you say,you have tried the HH and other routers,and have reset and rewired the connections to the OR modem with no joy,then it leaves only 2 possible causes.
    1)The RJ11 cable from the OR modem to the master socket might be faulty.
    2)But it is most likely to be a fault in the line from the master to the cabinet,or a very noisy line.
    You might need an engineer visit to check at the cab or the line.
    Your local network seems to be in order,as it is indicating a network connection,but if the line is faulty to the cab,then you would not be able to get a stable connection,or no internet.

  • TS1398 Connected to Wi Fi but cannot get Internet access

    Connected to Wi Fi but cannot get Internet access Have just done OTA update Dec 1 1012, could this be the problem?

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Apple TV connects to the network but cannot connect to the internet.

    Apple TV connects to the network but cannot connect to the internet. Works on other Apple TV's we have just not this new one. Defective???  Thank you!

    This might help:
    Apple TV (2nd gen.) saw my wireless network but did not accept my password (gave a network error message). It fixed instantly doing this:
    Made a note of the Apple TV's MAC address. Get it by pressing Menu on the remote, then Settings > General > About. It's called "WiFi address."
    Use your browser on a network connected computer to go to your router settings (usually 192.168.1.1).
    Under "Wireless > Wireless MAC Filter" (or something similar) do these steps:
    Enable Wireless MAC filter
    Enable "Permit PCs listed below to access the wireless network"
    Enter the Apple TV's MAC address
    Click "Save Setting"
    When I did this the network connection immediately started working.
    Note: These instructions are based on a Cisco Wireless-N Broadband, model WRT160Nv2, firmware v2.0.02.

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address.

    How to solve problem - " Safari cannot open page because it isn't connected to the internet" but the airport is ok. signal full and i have n IP address. and i m using Macbook pro.
    OS snow leopard and above...

    Do you have this problem with all websites, or only some? If only some, which ones?

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • "Connected" to the internet, but can't get on any websites or other pgms...

    A couple nights ago, there was a blackout at my house. This happened while my iMac was on.
    It connects using the Airport wireless modem to my landlord's router 3 stories up.
    Since the blackout, I've been "connected" to his network, but haven't been able to get on any websites. Do I simply need him to reset his router, or is there a deeper problem? Thanks!
    FWIW, this did happen very rarely before the blackout, but is now 100% of the time since....
    Thanks for your help!

    Hi there,
    A UPS (Uninterruptible power supply) is a battery back up, so if you power goes out you can finish up what you're working on and shut down normally.
    I had a similar incident this week, power went out all computers, modem and router went out. After power was restored all started up fine and looked good. Wireless router showed I was connected to the internet but could not surf any site. I had changed my email account password several weeks earlier (email account provided by my ISP) and did not think this had anything to do my boradband connection, but I was wrong.
    To make a long story short, I had to update the password as it related to my broadband connection. The connection was there, it just did not recognize my new password because I had changed it... If you control the account and you've changed any passwords associated with account yu will have to update or your landlord will have to update... make sense?
    Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

  • I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

Maybe you are looking for

  • QT crashes on export to any codec... haalp!

    After Effects 6.5 also crashes when trying to import any QT file. Seems like a QT issue. I have reinstalled QT. Still no love... thanks in advance for any advice.

  • Compaq Armada

    I have just installed (don't laugh) Windows 7 Starter Edition on my Compaq Armada 110 notebook and have found a Vista/Win7 driver that works for my Sweex PCMCIA card. Unfortunately I have not been so lucky with my sound. I have not, as yet, found a s

  • Why is my iTouch continuing to skip through songs

    My iTouch will not play songs, when I press "shuffle" it continues to skip through all my songs but doesnt pause when I press "pause".  If I select a song to play it doesn't play it and just brings me back to the song selection.  I don't understand w

  • Update vs Dialog WP

    Something that I'm not getting it completely... I'm going through SM66 and I'm seeing Dialog WPs with Reads, Inserts, Updates, Deletes. I also see Update WPs with sequential reads, besides the "natural" inserts and updates. I'm kind of seeing that Di

  • I updated and keep getting an error message in chineese

    After translating it this is what it says.  Before viewing the PDF document in this browser, you must first agree to the End User License Agreement by invoking the Adobe Reader, and then restart the browser. I have tried to open and think that i did