Connected to Wireless Network, Not Connected to Internet...

Hi All
I recently had my NVIDIA graphics card replaced as it freaked right out the other day.
I took my MacBook Pro home yesterday and everything was perfect. It connected to my wireless network @ home as normal, and was functional all night.
I have come to work today, and it automatically joined up with the network here. Only problem is, that whilst it connects to the network here, and obtains an IP address as well, as soon as I try to connect to the internet, it says that I am not connected to the internet!!!
Now the finer details:
* I have reset EVERYTHING. Routers, Modems, Computers etc
* All firmware is still the same as it was pre-nvidia fix up.
* Distance is not a problem, I am sitting next to the wireless router.
* An ethernet cable from the router to my computer ALLOWS access to the internet
* My Iphone can connect wirelessly to the same network and browse the internet.
* A windows PC can connect wirelessly to the same network and browse the net.
* I can see that it is connected to the router AND given an IP address.
Please help!!!

I had the same problem. I sent my MBP to get a Logic Board/Nvidia fix and when it came back I could no longer connect to networks using DHCP. I have to manually put in my IP, Subnet, etc. for every network I join.
Randomly about a week in I had some pop-up window show up asking me to allow incoming network connections for something and when i clicked on it I was able to us DHCP again. Just tonight it stopped working and I am once again in the position where i have to manually input IP info, etc.
Super Frustrating

Similar Messages

Can't connect to wireless network but connects if I move it 1 meter

Hi all,
I've had my 27" iMac Intel Core 2 Duo for over 3 months now with no issues, but suddenly over the weekend I can no longer connect to my network.
Sometimes I can see my network listed (but the signal is now very weak when it used to be very strong) and when I try to connect I get a "Connection Timeout" error. Othertimes I can't even see my network.
If I move my whole mac about 1 meter "closer" to the router (it sits downstairs, my mac upstairs) it connects fine. But as soon as I put it back on my desk, where it has been sitting for the past 3 months, the connection drops out or it can't find the network. (I can't leave it "closer" to the router, as that would mean I'm sitting on the floor right in my room doorway...)
All other PC's, laptops, my MacBook and iPhone all connect fine. In the MacBooks case, it connects fine in exactly the same spot as where my mac had been sitting for the past 3 months.
I'm using a Belkin N150 wireless router which is supposed to have a range of 300m (my house is definitely not that big!) and using a WPA2 Personal password security setting. As I said above, no issue before this past weekend (same router, same settings).
I have tried the following:
- restarting router, modem, computer (in various orders) to no avail
- deleting the system configuration folder, re-starting, etc.
Just wondering if there's something I'm missing? Or whether or not it's to do with the wider issue of connecting that people seem to have? I thought it may be different since I can connect if it sits somewhere else...
Any help wold be appreciated since my support has run out!
Thanks in advance!
Message was edited by: chuppachup

Yeah I've tried moving it but unfortunately I'm a bit constrained as to how far I can move it (aprox 20cms each way). There are lots of ethernet cables plugged in and they all run behind what is, a very solid, very big desk/shelving thing.
However, the position of the router hasn't changed in the past 3 months.
I've also tried disconnecting the cordless phone which sits in the same room and moving any extra cables around the router to no avail. But none of these things are new either.

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan

Can not connect to wireless networks with ipad 2

My ipad used to connect to the wireless net at home and in public areas.
Now all by the sudden it can't "see" the network.
Message: " could not connect to wireless network"
I have tried "everything" also on different networks,
except resetting the modem.
My iPhone works, as do all my other computers.
Modem is Zyxel P2812

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can't use apps because it says I'm not connected to wireless network

How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??

rixxy12345 wrote:
How do I use apps if it keeps saying I'm not connected to wireless network when I'm connected to wifi and have data connectivity??
Which apps?
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

TS1398 wi-fi network not providing an internet connection

wi-fi network not providing an internet connection
I have done everything there is to do. Reset my netgear reset password etc and still no connection. I use to have connection but got a new I pad and can not set it up.

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Do not reset your router. Next, reset network settings on your iPad (Settings > General > Reset > Reset Network Settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

MacBook automaticlly connects to wireless network, but not mine

At home when I start my MacBook, it sometimes connects to the neighbors wireless network (not protected at all) rather than to ours. It does that all by itself, without me doing anything. Can I tell my computer to only connect to our network, or at least to as for a confirm if it wants to connect somewhere else?

Hello Hans-Conrad Zur Loye. Welcome to the Apple Discussions!
Try the following:
1. Delete Preferred Network(s)
o System Preferences > Network > AirPort > Configure
o In the "By default, join:" pull-down menu, select "Preferred networks"
o Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
o Launch the "Keychain Access" application located in Applications/Utilties.
o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
o Restart, or log out then back in.
3. Add Preferred Network(s)
o System Preferences > Network > AirPort > Configure
o In the "By default, join:" pull-down menu, select "Preferred networks"
o Add the preferred network(s) using the "+" button.
o Restart or log out then back in.

Two Issues: Cannot connect to wireless networks; Cannot load certain sites

Hey everybody,
I have a MacBook Pro 15".
In just the past week, I've stumbled upon two sudden problems with my network/internet connectivity.
First, I can no longer connect to wireless networks, be it an infrastructure point or computer-to-computer ad-hoc networks. I'm not really sure why. I installed the latest AirPort Update (4.2.3, according to System Profiler). I also recently installed both iStumbler and KisMac v.21. When I started having issues, I thought that maybe one of these two programs might be the culprit, so I uninstalled both of them but I still have the same problem.
Second, I've had issues with not being able to connect to certain websites. I use both Safari and BonEcho as my browsers. The specific sites seem random:
www.weffriddles.com
www.macrumors.com
images.google.com
sports.yahoo.com
finance.yahoo.com
to list a few.
If you need any diagnostic information, please let me know.
Thanks in advance for any advice/help you can provide!
Tommy H.
MacBook Pro Mac OS X (10.4.9) browsers: Safari, BonEcho/ Airport Driver Version: 4.2.3

If you are trying to connect to a third-party router using WPA or WEP, there is a good chance that your Airport card was broken by Apple's 2007-02 Airport Update. There is no fix, and for many of us, our Macbooks and Macbook Pros are useless for wireless connections until Apple fixes the issue. At this point, Apple seems to be denying that there even is an issue, so we may all be in for a long wait indeed.
See this thread if you have some time:
http://discussions.apple.com/thread.jspa?threadID=883021&tstart=0

AOL Broadband, will connect to laptop, but not connect to internet explorer. WRT54GS v.6

I can connect to my wireless network via my laptop, but not to internet explorer. We have changed every setting imaginable and re-set the modem, router many times. We Ip configed, did ping tests, installed and re-installed the card in the laptop. Done all this 4 times with the tech support from Linksys. Finally, I realized it must the wireless router and/or modem configuration. (The laptop works on every other network in town except ours, and has not security settings enabled).
I have been on customer service calls for 2 weeks, with AOL and linksys and nothing seems to be helping me. I have 2 wireless routers (thought the first was bad, so bought another brand new), and just had a brand new modem installed. Basically, I have brand new equipment.
The laptop has no security settings and connect to any wireless network in town. It finds the connection to my WRT54GS v.6, but will not connect via internet explorer.
I want to uninstall and re-install the router. How do I uninstall the router? (I have instruction for re-installation). Also AOL rep told me, to make sure I configure the router to a certain port range. Any ideas as to how to do this?
Anyone have problems with AOL high speed and linksys router? Has the high speed cable cord coming out of the wall, not ethernet or DSL.
We have changed the settings in http://192.168.1.1 till I am blue in the face. None of the channels worked, security didn't work, adding the ip address manually to the laptop didn't work. I am getting no error messages. Am trying to get this wireless modem working because I need it. Should have come to this forum first!

hi..if you want to uninstall the router...the only thing you need to do is hold the reset button down for 30 seconds...
i m a bit confused here as to why the ISP techs asked you to forward ports on the router...port forwarding is needed for a specific application or a device that is behind the router....
the mentioned ports are for AOL messenger ( AIM )....and has nothing to do with the modem...anyways , let us work out together on this issue...carry out the steps i mention and you can revert back with the results and your success rate...
1) connect the computer to the modem and check what ip address you have on the computer ??
2) go to start -> control panel -> network connections ->
let me know what other icons you have besides Local Area Connection and Wireless Network Connection..
3)connect the computer to the router and the router to the modem...
access the router using http://192.168.1.1 .. let the internet connection type be on DHCP....check the ip address on the status page of the router ui...
4) if it is 0.0.0.0 , go to setup tab and go to mac address clone subtab , enable it and hit clone..save the settings and do a power cycle...
5) check whether you have the ip address...if you have the same ip as coming off of the modem..u should be online and if still 0.0.0.0 , then select PPPoE for the internet connection type and enter the username and password...check whether the ip address comes up....if still negative, ensure that the modem is in bridge mode...
6)if the ip address comes up as 192.168.1.x , change the local ip add of the router to 192.168.2.1 and do a power cycle..
let me know for any help !!!

Need HELP! connecting to wireless network; IP Address problems!

I am trying to connect to wireless networks using the AirPort built into my MacBook Pro. There are two specific networks I am trying to connect to, both are WEP protected. I know the passwords and can get into each of them but I cannot connect to the internet, which is the main reason for connecting to them in the first place! When I go into System Preferences and click on Network, I see that next to AirPort it says I am connected to the network but may not be able to connect to the internet because my computer has a Self Assigned IP address. I assume this means my computer is not receiving an IP address from the network. I am set on full auto with DHCP. So what's wrong? Please Help!!!

That indicates that the MacBook Pro did not successfully communicate with the DHCP server on the network. Do those networks have access control (MAC address filtering) enabled? If so, the best solution is to reconfigure the base station so that this feature is disabled. This adds no real security since MAC addresses are easily discovered and cloned.
If you can't disable access control, you will need to add the MAC address of the wireless interface of your MacBook Pro to the list of allowed clients.

[SOLVED] Cannot connect to wireless networks any more after update

Hello,
I updated my system some days ago and, after that, I can't connect to wireless networks any more.
My network card is ath9k and I'm currently using wicd.
When I try to connect to my wireless network, I get "Veryfing AP association" message, then it fails to connect.
Here's the dmesg output :
[ 6369.650201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6369.824358] r8169 0000:05:00.0 eth0: link down
[ 6369.824375] r8169 0000:05:00.0 eth0: link down
[ 6369.824398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6369.936721] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6371.462702] r8169 0000:05:00.0 eth0: link up
[ 6371.462718] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6373.214209] wlan0: authenticate with 00:1c:10:57:47:17
[ 6373.236813] wlan0: send auth to 00:1c:10:57:47:17 (try 1/3)
[ 6373.248706] wlan0: authenticated
[ 6373.248735] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6373.248737] ath9k 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 6373.248739] ath9k 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 6373.250756] wlan0: associate with 00:1c:10:57:47:17 (try 1/3)
[ 6373.253150] wlan0: RX AssocResp from 00:1c:10:57:47:17 (capab=0x411 status=0 aid=3)
[ 6373.253379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6373.253418] wlan0: associated
[ 6373.253431] ath9k 0000:09:00.0 wlan0: failed to set key 0
[ 6405.384916] wlan0: deauthenticating from 00:1c:10:57:47:17 by local choice (reason=3)
[ 6405.387398] cfg80211: Calling CRDA to update world regulatory domain
[ 6409.789779] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6409.890892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6410.069734] r8169 0000:05:00.0 eth0: link down
[ 6410.069750] r8169 0000:05:00.0 eth0: link down
[ 6410.069778] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6410.263183] r8169 0000:05:00.0 eth0: link down
[ 6410.263212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6411.717705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6411.898268] r8169 0000:05:00.0 eth0: link down
[ 6411.898297] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6413.630832] r8169 0000:05:00.0 eth0: link up
[ 6413.630848] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6415.903790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6416.089275] r8169 0000:05:00.0 eth0: link down
[ 6416.089302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6416.089327] r8169 0000:05:00.0 eth0: link down
[ 6416.386308] r8169 0000:05:00.0 eth0: link down
[ 6416.386338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6418.067675] r8169 0000:05:00.0 eth0: link up
[ 6418.067691] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
This particular line caught my attention: " wlan0: de-authenticating from 00:1c:10:57:47:17 by local choice (reason=3)". So I searched for it (without the MAC address) on the internet and found several solutions for it, involving wpa_supplicant, dhcpcd, IPv6 (disable it on /etc/sysctl.d/40-ipv6.conf) and card power management (operation not supported, don't have option on BIOS), but none of them worked for me.
Here's an excerpt from /var/log/wicd/wicd.log:
2014/03/01 11:48:15 :: Connecting to wireless network Curiosity
2014/03/01 11:48:15 :: Putting interface down
2014/03/01 11:48:15 :: Releasing DHCP leases...
2014/03/01 11:48:15 :: Setting false IP...
2014/03/01 11:48:15 :: Stopping wpa_supplicant
2014/03/01 11:48:15 :: Flushing the routing table...
2014/03/01 11:48:15 :: Putting interface up...
2014/03/01 11:48:17 :: Attempting to authenticate...
2014/03/01 11:48:19 :: Setting static IP : 192.168.2.188
2014/03/01 11:48:19 :: Setting default gateway : 192.168.2.1
2014/03/01 11:48:19 :: Verifying AP association...
2014/03/01 11:48:19 :: Attempt 1 of 10...
2014/03/01 11:48:24 :: Attempt 2 of 10...
2014/03/01 11:48:27 :: Attempt 3 of 10...
2014/03/01 11:48:30 :: Attempt 4 of 10...
2014/03/01 11:48:33 :: Attempt 5 of 10...
2014/03/01 11:48:36 :: Attempt 6 of 10...
2014/03/01 11:48:39 :: Attempt 7 of 10...
2014/03/01 11:48:42 :: Attempt 8 of 10...
2014/03/01 11:48:45 :: Attempt 9 of 10...
2014/03/01 11:48:48 :: Attempt 10 of 10...
2014/03/01 11:48:51 :: Connection Failed: Failed to ping the access point!
2014/03/01 11:48:51 :: exiting connection thread
2014/03/01 11:48:55 :: Sending connection attempt result association_failed
2014/03/01 11:48:55 :: Autoconnecting...
2014/03/01 11:48:55 :: Attempting to autoconnect with wired interface...
2014/03/01 11:48:55 :: Putting interface down
2014/03/01 11:48:55 :: Releasing DHCP leases...
2014/03/01 11:48:55 :: Setting false IP...
2014/03/01 11:48:55 :: Stopping wpa_supplicant
2014/03/01 11:48:55 :: Flushing the routing table...
2014/03/01 11:48:55 :: Putting interface up...
2014/03/01 11:48:58 :: Setting static IP : 192.168.2.188
2014/03/01 11:48:58 :: Setting default gateway : 192.168.2.1
2014/03/01 11:48:58 :: Connecting thread exiting.
2014/03/01 11:49:01 :: Putting interface down
2014/03/01 11:49:01 :: Releasing DHCP leases...
2014/03/01 11:49:01 :: Setting false IP...
2014/03/01 11:49:02 :: Stopping wpa_supplicant
2014/03/01 11:49:02 :: Flushing the routing table...
2014/03/01 11:49:02 :: Putting interface up...
2014/03/01 11:49:04 :: Setting static IP : 192.168.2.188
2014/03/01 11:49:04 :: Setting default gateway : 192.168.2.1
2014/03/01 11:49:04 :: Connecting thread exiting.
2014/03/01 11:49:07 :: Sending connection attempt result success
I've been connecting through wire since then and it's extremely uncomfortable being planted in one place.
Thanks.
Last edited by joaowojwicz (2014-04-03 12:17:53)

ewaller wrote:Well, let's start with a couple sanity checks. Look at the output of uname -a and of pacman -Qi linux and ensure that the running kernel (uname) is the same version that is installed.
Then. please post the output of lspci -nn and of ip link
Then, take a look at the output of sudo iw wlan0 scan
and see if you can see your AP. Also, verify that your wireless is called wlan0 by checking the ouput of ip link
Okay
>>log: uname -a
Linux Canopus 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:10:07 CET 2014 i686 GNU/Linux
>>log: pacman -Qi linux
Name : linux
Version : 3.13.5-1
Description : The Linux kernel and modules
Architecture : i686
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.13.5
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 61687.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 22 Feb 2014 20:11:46 BRT
Install Date : Mon 24 Feb 2014 02:50:00 BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : SHA256 Sum
>>log: lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
09:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
Yes, my wireless is called wlan0. I linked something to /dev/null to get the predictable names
>>log: ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 94:39:e5:f2:17:3f brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 18:03:73:93:4d:1b brd ff:ff:ff:ff:ff:ff
I'll just paste my wireless connection here.
>>log: sudo iw wlan0 scan
BSS 00:1c:10:57:47:17(on wlan0)
TSF: 59645240249 usec (0d, 16:34:05)
freq: 2462
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -31.00 dBm
last seen: 260 ms ago
Information elements from Probe Response frame:
SSID: Curiosity
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 11
ERP: Barker_Preamble_Mode
ERP D4.0: Barker_Preamble_Mode
Extended supported rates: 6.0 9.0 12.0 48.0
karol wrote:
Post the list of packages that were updated.
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
Okay, put code tag now. Here's the whole log since Feb, 24th. This was the day I started having problems.
[2014-02-24 02:32] [PACMAN] Running 'pacman -Suy'
[2014-02-24 02:32] [PACMAN] synchronizing package lists
[2014-02-24 02:32] [PACMAN] starting full system upgrade
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 60 trust: 1-, 0q, 0n, 5m, 0f, 0u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 60 signed: 4 trust: 60-, 0q, 0n, 0m, 0f, 0u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Updating trust database...
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
[2014-02-24 02:49] [PACMAN] upgraded archlinux-keyring (20140124-1 -> 20140220-1)
[2014-02-24 02:49] [PACMAN] upgraded hicolor-icon-theme (0.12-2 -> 0.13-1)
[2014-02-24 02:49] [PACMAN] upgraded banshee (2.6.1-2 -> 2.6.2-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-cups (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-hid2hci (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-libs (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-plugins (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-utils (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded cairo-perl (1.103-2 -> 1.104-1)
[2014-02-24 02:49] [PACMAN] upgraded cups-filters (1.0.45-1 -> 1.0.46-1)
[2014-02-24 02:49] [PACMAN] upgraded dbus-glib (0.100.2-1 -> 0.102-1)
[2014-02-24 02:49] [PACMAN] upgraded dialog (1:1.2_20140112-1 -> 1:1.2_20140219-1)
[2014-02-24 02:49] [PACMAN] upgraded easytag (2.1.9-1 -> 2.1.10-1)
[2014-02-24 02:49] [PACMAN] upgraded ethtool (1:3.11-1 -> 1:3.13-1)
[2014-02-24 02:49] [PACMAN] upgraded flashplugin (11.2.202.336-1 -> 11.2.202.341-1)
[2014-02-24 02:49] [PACMAN] upgraded libpng (1.6.8-1 -> 1.6.9-1)
[2014-02-24 02:49] [PACMAN] upgraded gdk-pixbuf2 (2.30.4-1 -> 2.30.5-1)
[2014-02-24 02:49] [PACMAN] upgraded glib-perl (1.301-1 -> 1.304-1)
[2014-02-24 02:49] [PACMAN] upgraded gparted (0.17.0-2 -> 0.18.0-1)
[2014-02-24 02:49] [PACMAN] upgraded pango-perl (1.224-2 -> 1.225-1)
[2014-02-24 02:49] [PACMAN] upgraded gtk2-perl (1.247-2 -> 1.249-1)
[2014-02-24 02:49] [PACMAN] upgraded imagemagick (6.8.8.6-1 -> 6.8.8.7-1)
[2014-02-24 02:49] [PACMAN] upgraded kdesdk-poxml (4.12.2-1 -> 4.12.2-2)
[2014-02-24 02:49] [PACMAN] upgraded libass (0.10.2-2 -> 0.11.1-1)
[2014-02-24 02:49] [PACMAN] upgraded libfm (1.1.2.2-2 -> 1.2.0-3)
[2014-02-24 02:49] [PACMAN] upgraded libftdi (1.1-2 -> 1.1-3)
[2014-02-24 02:49] [PACMAN] upgraded libindi (0.9.6-7 -> 0.9.7-1)
[2014-02-24 02:49] [PACMAN] upgraded linux-firmware (20140123.418320b-1 -> 20140217.343e460-1)
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-02-24 02:50] [ALPM-SCRIPTLET] depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> WARNING: AT keyboard support is no longer built into the kernel.
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> In order to use your keyboard during early init, you MUST
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> include the 'keyboard' hook in your mkinitcpio.conf.
[2014-02-24 02:50] [PACMAN] upgraded linux (3.12.9-1 -> 3.13.5-1)
[2014-02-24 02:50] [PACMAN] upgraded linux-headers (3.12.9-1 -> 3.13.5-1)
[2014-02-24 02:50] [PACMAN] upgraded lirc-utils (1:0.9.0-69 -> 1:0.9.0-70)
[2014-02-24 02:50] [PACMAN] upgraded lynx (2.8.7-7 -> 2.8.8-1)
[2014-02-24 02:50] [PACMAN] upgraded man-pages (3.58-1 -> 3.60-1)
[2014-02-24 02:50] [PACMAN] upgraded mercurial (2.9-1 -> 2.9-2)
[2014-02-24 02:50] [PACMAN] upgraded mutter (3.10.3-1 -> 3.10.4-1)
[2014-02-24 02:50] [PACMAN] upgraded networkmanager (0.9.8.8-1 -> 0.9.8.8-3)
[2014-02-24 02:50] [PACMAN] upgraded networkmanager-pptp (0.9.8.4-1 -> 0.9.8.4-2)
[2014-02-24 02:50] [PACMAN] upgraded pcmanfm (1.1.2-2 -> 1.2.0-1)
[2014-02-24 02:50] [PACMAN] upgraded postgresql-libs (9.3.2-4 -> 9.3.3-1)
[2014-02-24 02:50] [PACMAN] upgraded ppp (2.4.5-8 -> 2.4.6-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-configobj (4.7.2-6 -> 5.0.1-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-urwid (1.1.1-1 -> 1.2.0-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-zope-interface (4.0.5-2 -> 4.1.0-1)
[2014-02-24 02:50] [PACMAN] upgraded sbc (1.1-1 -> 1.2-1)
[2014-02-24 02:50] [PACMAN] upgraded t1lib (5.1.2-4 -> 5.1.2-5)
[2014-02-24 02:50] [PACMAN] upgraded totem-plparser (3.10.0-4 -> 3.10.1-1)
[2014-02-24 02:50] [PACMAN] upgraded vimpager (1.8.5-1 -> 1.8.6-1)
[2014-02-24 02:50] [PACMAN] upgraded vlc (2.1.3-1 -> 2.1.4-1)
[2014-02-24 02:50] [PACMAN] upgraded webkitgtk (2.2.4-2 -> 2.2.5-1)
[2014-02-24 02:50] [PACMAN] upgraded wine (1.7.12-2 -> 1.7.13-1)
[2014-02-24 02:50] [PACMAN] upgraded xarchiver (0.5.2-6 -> 0.5.3-1)
[2014-02-24 02:50] [PACMAN] upgraded xcb-util-wm (0.4.0-1 -> 0.4.1-1)
[2014-02-24 02:50] [PACMAN] upgraded xmlto (0.0.25-3 -> 0.0.25-5)
[2014-02-24 02:50] [PACMAN] upgraded youtube-dl (2014.02.13-1 -> 2014.02.22.1-1)
[2014-02-24 12:51] [PACMAN] Running 'pacman -Suy'
[2014-02-24 12:51] [PACMAN] synchronizing package lists
[2014-02-24 12:51] [PACMAN] starting full system upgrade
[2014-02-24 12:57] [PACMAN] upgraded ffmpeg (1:2.1.3-1 -> 1:2.1.4-1)
[2014-02-24 12:57] [PACMAN] upgraded libwbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded python2-configobj (5.0.1-1 -> 5.0.1-2)
[2014-02-24 12:57] [PACMAN] upgraded s-nail (14.5.2-4 -> 14.6-1)
[2014-02-24 12:57] [PACMAN] upgraded smbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded samba (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded xbmc (12.3-8 -> 12.3-9)
[2014-02-24 13:19] [PACMAN] Running 'pacman -Syy'
[2014-02-24 13:19] [PACMAN] synchronizing package lists
[2014-02-24 13:20] [PACMAN] Running 'pacman -Suu dhcpcd'
[2014-02-24 13:20] [PACMAN] starting full system upgrade
[2014-02-24 13:24] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/downgrade/downgrade-3.3-1-any.pkg.tar.xz'
[2014-02-24 13:24] [PACMAN] installed downgrade (3.3-1)
[2014-02-24 16:04] [PACMAN] Running 'pacman -Suy'
[2014-02-24 16:04] [PACMAN] synchronizing package lists
[2014-02-24 16:04] [PACMAN] starting full system upgrade
[2014-02-24 16:04] [PACMAN] upgraded vim-spell-br (20120506-1 -> 20120802-1)
[2014-02-24 16:04] [PACMAN] upgraded vim-spell-en (20120506-1 -> 20120802-1)
[2014-02-24 18:30] [PACMAN] Running 'pacman -Suy'
[2014-02-24 18:30] [PACMAN] synchronizing package lists
[2014-02-24 18:30] [PACMAN] starting full system upgrade
[2014-02-24 20:13] [PACMAN] Running 'pacman -Suy'
[2014-02-24 20:13] [PACMAN] synchronizing package lists
[2014-02-24 20:13] [PACMAN] starting full system upgrade
[2014-02-24 21:31] [PACMAN] Running 'pacman -Suy'
[2014-02-24 21:31] [PACMAN] synchronizing package lists
[2014-02-24 21:31] [PACMAN] starting full system upgrade
[2014-02-24 21:53] [PACMAN] Running 'pacman -Suy'
[2014-02-24 21:53] [PACMAN] synchronizing package lists
[2014-02-24 21:53] [PACMAN] starting full system upgrade
[2014-02-24 22:38] [PACMAN] Running 'pacman -R networkmanager'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals'
[2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module'
[2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module telepathy-kde-send-file telepathy-kde-text-ui'
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-text-ui (0.7.1-2)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-send-file (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-integration-module (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-filetransfer-handler (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-desktop-applets (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-runner (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-auth-handler (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-approver (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-accounts-kcm (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-list (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed skype4empathy (20110407-4)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-common-internals (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed empathy (3.10.3-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-mission-control (5.16.0-1)
[2014-02-24 22:41] [PACMAN] removed kdeplasma-applets-networkmanagement (1:0.9.0.9-1)
[2014-02-24 22:41] [PACMAN] removed network-manager-applet (0.9.8.8-1)
[2014-02-24 22:41] [PACMAN] removed networkmanager-pptp (0.9.8.4-2)
[2014-02-24 22:41] [PACMAN] removed networkmanager-openvpn (0.9.8.4-1)
[2014-02-24 22:41] [ALPM] warning: /etc/NetworkManager/NetworkManager.conf saved as /etc/NetworkManager/NetworkManager.conf.pacsave
[2014-02-24 22:41] [PACMAN] removed networkmanager (0.9.8.8-3)
[2014-02-25 03:40] [PACMAN] Running 'pacman -Suy'
[2014-02-25 03:40] [PACMAN] synchronizing package lists
[2014-02-25 03:40] [PACMAN] starting full system upgrade
[2014-02-25 03:44] [PACMAN] upgraded youtube-dl (2014.02.22.1-1 -> 2014.02.24-1)
[2014-02-25 12:23] [PACMAN] Running 'pacman -Suy'
[2014-02-25 12:23] [PACMAN] synchronizing package lists
[2014-02-25 12:24] [PACMAN] starting full system upgrade
[2014-02-25 12:24] [PACMAN] upgraded dmenu (4.5-3 -> 4.5.13.5ed5e90-1)
[2014-02-25 12:24] [PACMAN] upgraded telepathy-glib (0.22.0-1 -> 0.22.1-1)
[2014-02-25 12:24] [PACMAN] upgraded tumbler (0.1.29-1 -> 0.1.30-1)
[2014-02-25 12:25] [PACMAN] upgraded youtube-dl (2014.02.24-1 -> 2014.02.25-1)
[2014-02-25 14:55] [PACMAN] Running 'pacman -Suy'
[2014-02-25 14:55] [PACMAN] synchronizing package lists
[2014-02-25 14:55] [PACMAN] starting full system upgrade
[2014-02-25 15:19] [PACMAN] upgraded ipython2 (1.1.0-1 -> 1.2.1-1)
[2014-02-25 15:19] [PACMAN] upgraded python2-pip (1.5.2-1 -> 1.5.4-1)
[2014-02-25 17:13] [PACMAN] Running 'pacman -Suy'
[2014-02-25 17:13] [PACMAN] synchronizing package lists
[2014-02-25 17:13] [PACMAN] starting full system upgrade
[2014-02-25 18:10] [PACMAN] Running 'pacman -Suy'
[2014-02-25 18:10] [PACMAN] synchronizing package lists
[2014-02-25 18:10] [PACMAN] starting full system upgrade
[2014-02-25 18:41] [PACMAN] Running 'pacman -S fbgrab'
[2014-02-25 18:41] [PACMAN] installed fbgrab (1.0-7)
[2014-02-26 13:19] [PACMAN] Running 'pacman -Suy'
[2014-02-26 13:19] [PACMAN] synchronizing package lists
[2014-02-26 13:19] [PACMAN] starting full system upgrade
[2014-02-26 13:25] [PACMAN] upgraded libmariadbclient (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded mariadb-clients (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded mariadb (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded python2 (2.7.6-2 -> 2.7.6-3)
[2014-02-26 13:25] [PACMAN] upgraded s-nail (14.6-1 -> 14.6.1-1)
[2014-02-26 13:26] [PACMAN] upgraded xbmc (12.3-9 -> 12.3-10)
[2014-02-26 16:00] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
[2014-02-26 16:02] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
[2014-02-26 16:42] [PACMAN] Running 'pacman -Suy'
[2014-02-26 16:42] [PACMAN] synchronizing package lists
[2014-02-26 16:42] [PACMAN] starting full system upgrade
[2014-02-26 17:25] [PACMAN] Running 'pacman -Suy'
[2014-02-26 17:25] [PACMAN] synchronizing package lists
[2014-02-26 17:25] [PACMAN] starting full system upgrade
[2014-02-26 17:25] [PACMAN] upgraded libaccounts-glib (1.15-1 -> 1.16-1)
[2014-02-26 17:25] [PACMAN] upgraded libaccounts-qt (1.10-1 -> 1.11-1)
[2014-02-26 17:52] [PACMAN] Running 'pacman -Suy'
[2014-02-26 17:52] [PACMAN] synchronizing package lists
[2014-02-26 17:52] [PACMAN] starting full system upgrade
[2014-02-26 17:53] [PACMAN] upgraded signon (8.55-1 -> 8.56-1)
[2014-02-26 18:08] [PACMAN] Running 'pacman -Suy'
[2014-02-26 18:08] [PACMAN] synchronizing package lists
[2014-02-26 18:08] [PACMAN] starting full system upgrade
[2014-02-26 21:52] [PACMAN] Running 'pacman -Suy'
[2014-02-26 21:52] [PACMAN] synchronizing package lists
[2014-02-26 21:52] [PACMAN] starting full system upgrade
[2014-02-26 22:08] [PACMAN] upgraded grep (2.16-1 -> 2.18-1)
[2014-02-26 22:41] [PACMAN] Running 'pacman -S xchat'
[2014-02-26 22:41] [PACMAN] installed xchat (2.8.8-13)
[2014-02-27 00:02] [PACMAN] Running 'pacman -Suy'
[2014-02-27 00:02] [PACMAN] synchronizing package lists
[2014-02-27 00:02] [PACMAN] starting full system upgrade
[2014-02-27 01:41] [PACMAN] Running 'pacman -Suy'
[2014-02-27 01:41] [PACMAN] synchronizing package lists
[2014-02-27 01:41] [PACMAN] starting full system upgrade
[2014-02-27 12:20] [PACMAN] Running 'pacman -Suy'
[2014-02-27 12:20] [PACMAN] synchronizing package lists
[2014-02-27 12:20] [PACMAN] starting full system upgrade
[2014-02-27 12:26] [PACMAN] upgraded net-snmp (5.7.2-8 -> 5.7.2.1-1)
[2014-02-27 12:26] [PACMAN] upgraded youtube-dl (2014.02.25-1 -> 2014.02.26-1)
[2014-02-27 16:01] [PACMAN] Running 'pacman -Suy'
[2014-02-27 16:01] [PACMAN] synchronizing package lists
[2014-02-27 16:01] [PACMAN] starting full system upgrade
[2014-02-27 16:05] [PACMAN] upgraded wpa_supplicant (2.0-4 -> 2.1-3)
[2014-02-27 19:58] [PACMAN] Running 'pacman -Suy'
[2014-02-27 19:58] [PACMAN] synchronizing package lists
[2014-02-27 19:58] [PACMAN] starting full system upgrade
[2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus'
[2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus-font'
[2014-02-27 20:01] [PACMAN] installed terminus-font (4.38-4)
[2014-02-27 21:04] [PACMAN] Running 'pacman -Suy'
[2014-02-27 21:04] [PACMAN] synchronizing package lists
[2014-02-27 21:04] [PACMAN] starting full system upgrade
[2014-02-27 22:51] [PACMAN] Running 'pacman -Suy'
[2014-02-27 22:51] [PACMAN] synchronizing package lists
[2014-02-27 22:51] [PACMAN] starting full system upgrade
[2014-02-28 12:09] [PACMAN] Running 'pacman -Suy'
[2014-02-28 12:09] [PACMAN] synchronizing package lists
[2014-02-28 12:09] [PACMAN] starting full system upgrade
[2014-02-28 16:51] [PACMAN] Running 'pacman -Suy'
[2014-02-28 16:51] [PACMAN] synchronizing package lists
[2014-02-28 16:52] [PACMAN] starting full system upgrade
[2014-03-01 12:10] [PACMAN] Running 'pacman -S bluez'
[2014-03-01 12:19] [PACMAN] Running 'pacman -S xf86-input-joystick linuxconsole'
[2014-03-01 12:20] [PACMAN] installed xf86-input-joystick (1.6.2-3)
[2014-03-01 12:20] [PACMAN] installed linuxconsole (1.4.6-1)
[2014-03-01 12:21] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/rejoystick/rejoystick-0.8.1-3-i686.pkg.tar.xz'
[2014-03-01 12:21] [PACMAN] installed rejoystick (0.8.1-3)
[2014-03-01 12:22] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/joystick/joystick-20051019-12-i686.pkg.tar.xz'
[2014-03-01 12:48] [PACMAN] Running 'pacman -Suy'
[2014-03-01 12:48] [PACMAN] synchronizing package lists
[2014-03-01 12:48] [PACMAN] starting full system upgrade
[2014-03-01 12:49] [PACMAN] upgraded glibc (2.19-2 -> 2.19-3)
[2014-03-01 12:49] [PACMAN] upgraded device-mapper (2.02.105-1 -> 2.02.105-2)
[2014-03-01 12:49] [PACMAN] upgraded cryptsetup (1.6.3-2 -> 1.6.4-1)
[2014-03-01 12:49] [PACMAN] upgraded feh (2.9.3-1 -> 2.10-1)
[2014-03-01 12:49] [PACMAN] upgraded libtirpc (0.2.3-2 -> 0.2.4-1)
[2014-03-01 12:49] [PACMAN] upgraded readline (6.2.004-2 -> 6.3-1)
[2014-03-01 12:49] [PACMAN] upgraded lvm2 (2.02.105-1 -> 2.02.105-2)
[2014-03-01 12:49] [PACMAN] upgraded ppp (2.4.6-1 -> 2.4.6-2

Brand new macbook pro cannot connect to wireless networks

The first time I called apple tech, they thought it was a problem with my internet provider. I've called 4 times now, and I'm still getting the runaround.
I have an old (2001) G4 sitting right next to my macbook pro which can see numerous wireless networks and connect to them all. A strong connection at that. However, my brand new (refurbished) Macbook Pro Intel etc,.... supposedly best computer ever made, . . . . can see the same wireless networks but has never been able to connect. As a student, I saved for a year to buy this notebook so I could work at cafe's & study with my friends. My friends with PC's can all connect to these wireless networks. My friends with older, less expensive notebooks can connect no problem. I have never been able to connect. Bought this peice of junk 2 1/2 months ago - only because I didn't want to be stuck at home anymore with my desktop. Stupid me to trust apple.
I wish I could get my $ back, but I'm now being told that it's 30 days too late. Before they told me it was a minor thing and some software update could fix it. I did as told. downloaded and installed their 10.4.8 thingy - deleted all the keychain stuff - nothing. same peice of junk.
Now they are telling me to go back to the genius bar where folks are just rude to me and tell me they can't help me becuase I bought a "refurbished" model that didn't even save me $25. What do you know.
Anyone having problems like this? Anyone out there who can help me?

Okay,
I apologie for calling it a peice of junk. I know you all probably worship this machine. I'm just really frustrated. I noticed that this is a very common problem - though most of the posts identical to mine have dissapeared from apple.com - this well known defect is all over other discussion boards and websites like macdefect, etc,....
So, can any of you tech gods help me with this very well known, common problem that I haven't been able to fix with 10.4.8 upgrade?
Thanks for your time and assistance,
-mcgrafx

Can't connect to wireless network in XP under bootcamp

Hey there,
I'm hoping that someone here can provide some help. I've got XP sp2 running 'fine' in Bootcamp - 10.6.3 iMac 27 i7. The only thing that I can't get working is the wireless connection. I can't for the life of me figure out how I am supposed to get XP to connect to my wireless network, and consequently no internet access.
From what I've read I'm supposed to go to Network Connections and choose 'New Wireless Connection' but the problem I have is that I don't see 'New Wireless Connection' there anywhere. I have installed the extra drivers from my Snow Leopard disc but this problem persists.
Have I missed something? Can anyone offer any advice on how I can get this working?
Thanks very much in advance!

Hi,
have a look here http://support.microsoft.com/?scid=kb%3Ben-us%3B870702&x=10&y=12 for possible solutions.
Might be a problems with a hidden SSID (Service Set Identifier).
Hope it helps
Stefan

Hp C4580 printer won't connect to wireless network, but see network is available.

I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
Help would be great.

Hello there! Welcome to the forums @Cushionman ,
I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
Let me know the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

[SOLVED]cannot connect to wireless network due to a channel setting

Hello guys, I recently came across a problem with my wireless network.
It was first a system-wide upgrade(adapted from the pacman's log):
[2010-08-22 15:10] Running 'pacman -Syu'
[2010-08-22 15:10] synchronizing package lists
[2010-08-22 15:10] starting full system upgrade
[2010-08-22 16:14] upgraded avahi (0.6.25-3 -> 0.6.27-2)
[2010-08-22 16:14] upgraded nspr (4.8.4-1 -> 4.8.6-1)
[2010-08-22 16:14] upgraded nss (3.12.6-3 -> 3.12.7-1)
[2010-08-22 16:14] upgraded chromium (5.0.375.125-1 -> 5.0.375.127-1)
[2010-08-22 16:14] upgraded curl (7.21.0-1 -> 7.21.1-1)
[2010-08-22 16:14] upgraded freetype2 (2.4.1-1 -> 2.4.2-1)
[2010-08-22 16:14] upgraded gnome-keyring (2.30.3-1 -> 2.30.3-2)
[2010-08-22 16:14] upgraded gstreamer0.10 (0.10.29-1 -> 0.10.30-1)
[2010-08-22 16:14] upgraded orc (0.4.6-1 -> 0.4.7-1)
[2010-08-22 16:14] upgraded udev (160-1 -> 161-1)
[2010-08-22 16:14] upgraded gstreamer0.10-base (0.10.29-1 -> 0.10.30-1)
[2010-08-22 16:14] upgraded gstreamer0.10-base-plugins (0.10.29-1 -> 0.10.30-1)
[2010-08-22 16:14] upgraded k3b (2.0.0-2 -> 2.0.1-2)
[2010-08-22 16:14] upgraded linux-firmware (20100623-2 -> 20100807-1)
[2010-08-22 16:14] >>> Updating module dependencies. Please wait ...
[2010-08-22 16:14] >>> MKINITCPIO SETUP
[2010-08-22 16:14] >>> ----------------
[2010-08-22 16:14] >>> If you use LVM2, Encrypted root or software RAID,
[2010-08-22 16:14] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-08-22 16:14] >>> More information about mkinitcpio setup can be found here:
[2010-08-22 16:14] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-08-22 16:14]
[2010-08-22 16:14] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-08-22 16:14] ==> Building image "default"
[2010-08-22 16:14] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-08-22 16:14] :: Begin build
[2010-08-22 16:14] :: Parsing hook [base]
[2010-08-22 16:14] :: Parsing hook [udev]
[2010-08-22 16:14] :: Parsing hook [autodetect]
[2010-08-22 16:14] :: Parsing hook [pata]
[2010-08-22 16:14] :: Parsing hook [scsi]
[2010-08-22 16:14] :: Parsing hook [sata]
[2010-08-22 16:14] :: Parsing hook [usbinput]
[2010-08-22 16:14] :: Parsing hook [keymap]
[2010-08-22 16:15] :: Parsing hook [encrypt]
[2010-08-22 16:15] :: Parsing hook [lvm2]
[2010-08-22 16:15] :: Parsing hook [filesystems]
[2010-08-22 16:15] :: Generating module dependencies
[2010-08-22 16:15] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-08-22 16:15] ==> SUCCESS
[2010-08-22 16:15] ==> Building image "fallback"
[2010-08-22 16:15] ==> Running command: /sbin/mkinitcpio -k 2.6.35-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-08-22 16:15] :: Begin build
[2010-08-22 16:15] :: Parsing hook [base]
[2010-08-22 16:15] :: Parsing hook [udev]
[2010-08-22 16:15] :: Parsing hook [pata]
[2010-08-22 16:15] :: Parsing hook [scsi]
[2010-08-22 16:15] :: Parsing hook [sata]
[2010-08-22 16:15] :: Parsing hook [usbinput]
[2010-08-22 16:15] :: Parsing hook [keymap]
[2010-08-22 16:15] :: Parsing hook [encrypt]
[2010-08-22 16:15] :: Parsing hook [lvm2]
[2010-08-22 16:15] :: Parsing hook [filesystems]
[2010-08-22 16:16] :: Generating module dependencies
[2010-08-22 16:16] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-08-22 16:16] ==> SUCCESS
[2010-08-22 16:16] upgraded kernel26 (2.6.34.3-1 -> 2.6.35.2-1)
[2010-08-22 16:16] upgraded kernel26-headers (2.6.34.3-1 -> 2.6.35.2-1)
[2010-08-22 16:16] upgraded libdatrie (0.2.3-1 -> 0.2.4-1)
[2010-08-22 16:16] upgraded libgnome-keyring (2.30.1-1 -> 2.30.1-2)
[2010-08-22 16:16] upgraded libpciaccess (0.11.0-1 -> 0.12.0-1)
[2010-08-22 16:16] upgraded libxvmc (1.0.5-1 -> 1.0.6-1)
[2010-08-22 16:16] upgraded mdadm (3.1.2-2 -> 3.1.3-1)
[2010-08-22 16:16] upgraded pixman (0.18.2-1 -> 0.18.4-1)
[2010-08-22 16:16] upgraded poppler-data (0.4.2-1 -> 0.4.3-1)
[2010-08-22 16:16] upgraded powertop (1.11-2 -> 1.13-2)
[2010-08-22 16:16] upgraded pycairo (1.8.8-1 -> 1.8.10-1)
[2010-08-22 16:16] upgraded pygtk (2.17.0-1 -> 2.17.0-2)
[2010-08-22 16:16] upgraded qimageblitz (0.0.5-1 -> 0.0.6-1)
[2010-08-22 16:16] upgraded usbutils (0.87-1 -> 0.90-1)
[2010-08-22 16:16] upgraded vlc (1.1.2-2 -> 1.1.3-1)
[2010-08-22 16:16] upgraded xextproto (7.1.1-1 -> 7.1.2-1)
[2010-08-22 16:16] upgraded xf86-input-evdev (2.4.0-1 -> 2.4.0-2)
[2010-08-22 16:16] upgraded xproto (7.0.17-1 -> 7.0.18-1)
Then after a reboot, I wouldn't be able to connect to wireless network anymore.
I tried "netcfg Wireless_Archer(my wireless profile's name)" as usual, it replied:
[root@mzws log]# netcfg Wireless_Archer
:: Wireless_Archer up [BUSY]
> WPA Authentication/Association Failed
[FAIL]
Next I tried to bing the network up manually. I followed the "Wireless Setup" and "WPA supplicant" wiki, then I get a timed out problem:
[root@mzws ~]# ifconfig wlan0 up
[root@mzws ~]# iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: D8:5D:4C:59:52:EC
Channel:13
Frequency:2.472 GHz (Channel 13)
Quality=66/70 Signal level=-44 dBm
Encryption key:on
ESSID:"Archer"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
12 Mb/s; 24 Mb/s; 36 Mb/s
Bit Rates:9 Mb/s; 18 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=000000000bf666fe
Extra: Last beacon: 70ms ago
IE: Unknown: 0006417263686572
IE: Unknown: 010882848B960C183048
IE: Unknown: 03010D
IE: Unknown: 2A0100
IE: Unknown: 32041224606C
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
IE: Unknown: DD0900037F01010008FF7F
IE: Unknown: DD1A00037F0301000000D85D4C5952ECDA5D4C5952EC64002C010808
Cell 02 - Address: 00:22:B0:8C:76:D7
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=22/70 Signal level=-88 dBm
Encryption key:on
ESSID:"szpatrick"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Unknown/bug
Extra:tsf=000000e93e5b9174
Extra: Last beacon: 1340ms ago
IE: Unknown: 0009737A7061747269636B
IE: Unknown: 010882848B961224486C
IE: Unknown: 030101
IE: Unknown: 32040C183060
IE: Unknown: 0706474220010D10
IE: Unknown: 33082001020304050607
IE: Unknown: 33082105060708090A0B
IE: Unknown: DD050050F20500
IE: Unknown: DD0E0050F204104A0001101044000102
IE: Unknown: 050400010000
IE: Unknown: 2A0100
IE: Unknown: 2D1A6E1013FFFF0000010000000000000000000000000C0000000000
IE: Unknown: 3D1601050100000000000000000000000000000000000000
IE: Unknown: 7F0101
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
IE: Unknown: DD1E00904C336E1013FFFF0000010000000000000000000000000C0000000000
IE: Unknown: DD1A00904C3401050100000000000000000000000000000000000000
IE: Unknown: DD07000C4304000000
Cell 03 - Address: 00:25:68:EB:3F:FC
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=26/70 Signal level=-84 dBm
Encryption key:on
ESSID:"vodafone3FFB"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000002f6c23184
Extra: Last beacon: 570ms ago
IE: Unknown: 000C766F6461666F6E6533464642
IE: Unknown: 010882848B960C121824
IE: Unknown: 03010B
IE: Unknown: 050400010000
IE: Unknown: 200100
IE: Unknown: 2A0104
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: 32043048606C
IE: Unknown: DD180050F2020101020003A4000027A4000042435E0062322F00
IE: Unknown: DD1E00904C334E101BFFFF000000000000000000000000000000000000000000
IE: Unknown: 2D1A4E101BFFFF000000000000000000000000000000000000000000
IE: Unknown: DD1A00904C340B071B00000000000000000000000000000000000000
IE: Unknown: 3D160B071B00000000000000000000000000000000000000
IE: Unknown: DD0900037F01010000FF7F
IE: Unknown: DD0A00037F04010020000000
IE: Unknown: 0706494520010D14
[root@mzws ~]# wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
[root@mzws ~]# iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"Archer"
Mode:Managed Frequency:2.472 GHz Access Point: D8:5D:4C:59:52:EC
Bit Rate=1 Mb/s Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=66/70 Signal level=-44 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@mzws ~]# sleep 10s;dhcpcd wlan0
dhcpcd[4076]: version 5.2.7 starting
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: wlan0: carrier lost
dhcpcd[4076]: wlan0: carrier acquired
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: wlan0: broadcasting for a lease
dhcpcd[4076]: wlan0: carrier lost
dhcpcd[4076]: wlan0: carrier acquired
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: wlan0: broadcasting for a lease
dhcpcd[4076]: wlan0: carrier lost
dhcpcd[4076]: wlan0: carrier acquired
dhcpcd[4076]: wlan0: rebinding lease of 192.168.1.102
dhcpcd[4076]: timed out
I tried the "iwconfig wlan0 channel auto", but that didn't work. Here's the output of "lspci | grep -i net":
[root@mzws ~]# lspci | grep -i net
00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03)
03:00.0 Network controller: Intel Corporation WiFi Link 1000 Series
So what's the problem here? I searched the forum and google, and it seemed that I connected to a wrong router(for sometimes I only one "carrier lost" then "timed out"), but how was that happened? Things worked quite well before the upgrading as well as in my Windows environment.
Any reply would be appreciated! Thanks in advance!
Last edited by karbon (2010-08-23 06:40:10)

Thanks Proofrific, but I believe it's not, for the DHCP server is a built-in module in my wireless router.
I am now able to connect to my wireless network now. And it seems to be a little kernel bug as I discovered a thread(sorry but I forgot which one) in the forum discussing a similar problem.... Somebody in that post suggested a work-around to change the channel, as their default setting is channel 13 or 12.
I tried and it did work! Just simply open your router's setting page and then change the channel from auto to 3(in my case), and netcfg worked well now. For the manual configuration, I suppose the "iwconfig wlan0 channel 3" should be issued.
Thanks everyone in the forum for providing their solutions!

Connected to Wireless Network, Not Connected to Internet...

Similar Messages

Maybe you are looking for