Connectig an AP1131 act as WGB to AP root with two VLANS and two SSIDs

Someone Knows, if I can connect an AP 1131 configured as WGB to other AP 1131 acting as root with 2 Vlans and 2 SSIDs, and pass all of them to the WGB ethernet port, a mean, passing the traffic from the 2 differents VLANs with two differnts IP range from the ethernet AP root port, to the ethernet WGB port.
Thanks.

Unfortunately it will not play. AP as a WGB can cary only one (native) VLAN. For interconnecting more VLANs you need a full wireless bridge but it cannot be AP11xx.

Similar Messages

TS3694 I got my cracked screen fixed , and ever since my phone has been acting up. Now Im trying to restore it and it wont restore. Also my phone wont work without being on the charger. It just wont disconnect from ITunes Can I get help ASAP

I got my cracked screen fixed , and ever since my phone has been acting up. Now Im trying to restore it and it wont restore. Also my phone wont work without being on the charger. It just wont disconnect from ITunes Can I get help ASAP

nadiamilan wrote:
I think that is an great idea . But I wanna know if there is anything else i can do besides going all way back to the place i got if fixed at ....
Probably not.

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

Now iTunes will not recognize my phone as a device...

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

We are just users like yourself. If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
I have a 27" & do not suffer from such a problem. You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here.
Think of these forums as a hospital emergency room.

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

I have downloaded firefox and it always is locking up when I am in the middle of something, acts like I am not connected to the internet and then I have to restart my computer how can I retify this?

Hi Francis,
Are you getting kernel panics?
http://support.apple.com/kb/TS3742
http://www.thexlab.com/faqs/kernelpanics.html

MY computer crashed and I had to reload the operating system. I had purchased the export PDF. However, I had not back up since my purchase. The export no longer works, it just keeps circling and the message acts like it is doing it but it circles and

MY computer crashed and I had to reload the operating system. I had purchased the export PDF. However, I had not back up since my purchase and it is my understanding that this software is not stored on my computer. The export no longer works, it just keeps circling and the message acts like it is doing it but it circles and never completes. Msg says "uploading file to adobe exportPDF online"

Hi lisa99vano,
I'm sorry that your computer crashed. That's the worst. But, it shouldn't have affected ExportPDF, since that is an online service (provided you're using a supported web browser, and there's no firewall or proxy preventing ExportPDF from uploading). First, please make sure that you're using a supported web browser: http://www.adobe.com/acom/systemreqs/
Next, I think we should consider the file that you're trying to convert. How big is it? Had you tried converting it before the crash? Does it contain both text and graphics? Do other files convert without issue?
I look forward to hearing back from you with some specifics about the file.
Best,
Sara

Need comparable contact managament to Act by Sage that will synch with iphone

I am having trouble finding a contact management solution similar to Act (which, obnoxiously, does not synch with iphone). Most I am finding are too bloated and complex (ex. Salesforce). I need it to synch with my iphone and Entourage on my MacBook Pro. I am in sales, with an awful memory. I just need somthing to log all interactions with contacts. I do not need to run sales reports, handle campaigns, workflows, etc. Thanks!

Here are just a few suggestions others and by no means is exhaustive, I am sure others will weigh in.
-Just a cursory read of the support forum I have not seen overwhelming complaints that iPhone does not work with windows. It seems mac and windows work equally well with the iPhone
-Ringtones if you like ringtones and could see your self loading your iPhone up go with the mac. Garage Band gives you the ability to make ring tones from your own music collection for free. There are down loads like iToner etc that are unofficial ring tone makers so it makes it a little more difficult to you use.
-As long as memory of your devices exceeds 16 GB (which is as high as the iPhone goes) you will be able to take full advantage of your iPhone. Anything more will not make a difference.
-There is no heavy processing involved with your iPhone syncing to your desktop/laptop. What we are taking about is down loading contact lists music etc. No real graphics rendering is taking place. The iPhone is a seperate system you desktop/laptop to manage your iPhone for preferences downloads etc. So processing speeds do not matter that much.
-iPhone apps work with any iPhone regardless of what OS it is synced to. Even if you would like to use Mobile Me it can utilize some windows programs.
What I would do is figure out which or your personal computers you use most. Then I would set up a Mobile Me account then I would add all other computers you might use to sync with your Mobile Me account and this would solve all of your problems, for 99 bucks/year that is.

1552 in P-MP acting as 802.11a Wireless Bridge with single antenna SISO

Can you configure three Cisco 1552EUs to act as a RAP and two MAPs in a bridge only Point to Multipoint configuration.
I'd like to disable two of the 5Ghz antenna ports and use just a single TX/RX port and a single directional antenna for each AP.
Does this simply reduce the system gain because you lose the MRC MIMO advantage / gain of either 1.7 or 4.7db (depending on qty of spatial streams).
Also, are the 1552EU's backward compatible with the Cisco 1310's in the configuration mentioned above.
Thanks for any comments.

The transfer speeds sound about right. The "54Mbps" is a signaling rate, not a throughput.
To make 802.11 wireless "reliable" (comparable to a wired network) the data is, in effect, sent twice and staggered such that a glitch usually doesn't get both.
In terms of throughput of your data, a strong signal with good signal quality, using IP, unencrypted should run ~22-26Mbps (some variability for noise/interference, mixed frame sizes, TCP ACK times, application responses, etc).
So, at ~24 Mbps (megabits per second) you're looking at ~4 megabytes per second versus 100Mbps/12.5mBps as a probable max rate.
Given that, a transfer that takes approximately one minute on a wired network under typical conditions ... having it take four-to-five minutes on a typical wireless system is about right.
For power settings, you can adjust the power by monitoring the RSSI values on the receiving system. If I can find the docs on Cisco's main site I'll post 'em up later (gotta run ...), but if the mechanical install is good, then it'll just be a little keyboard work.
Good Luck
Scott

Merge acting odd. Merges image in front of some and behind others.

I use the Merge with background function A LOT and have never had an issue... until today.
Suddenly, when I select Merge (or CTRL + M) the image I am trying to merge is only 'partially' merging. Oddly enough it is being placed in front of one image on the slide and behind another image on the slide. Super weird. I am expecting it to just place it in front of everything as it usually does. I am dumbfounded.
I have combed thru the forum for an answer but I cant find an answer.
NOTE: I do NOT have "Use Master Slide Background" selected (.... and never have had it selected as I dont work with Master slides). I have also closed and reopened CP6 and rebooted my computer.

Rod,
I do not have Master Slide Objects On Top selected either.
For now I am going to leave the image in the timeline to cover the old image but I still just dont understand why/how Master slides would have anything to do with why trying to merge the image is acting so strange.
I continues to place the merged clipart between other images that are part of the original slide... like a deck of cards and placing the merged image between two other cards.
Lilybiri - Do you have any suggestions on what I might do with Master Slides to get the Merge to function?
Thanks

Screen Sharing started acting funny with both iChat and Back-to-my-Mac

For some reason my Screen Sharing, whether via iChat or BTMM, started acting funny: I still connect, but now my cursor shows up about 1" to the right of where it's actually pointing (i.e., if I position the cursor on one icon on the large size Dock, and click, it will start the icon to its left); and when I move the cursor, sometimes it appears followed by a trailing stream of cursors; finally, if I can manage to move a window on the screen, it looks like only half or so of the window moves, and the rest of the window stays put.
Anybody else experiencing this problem? Thanks in advance.

Ralph, you are awesome! Someone on the Remote Mac had done a <ctr>l plus <alt> plus "+" and zoomed up the screen once or twice. When I turned Zoom off in System Preferences Universal Access, things went back to being ok.
Thanks so much for the advice. I live in Texas and the remote iMac (with my octogenarian parents) is in Iowam so you saved me!
Nick

My ipod acts as though someone is invisibly pressing the button and starts jumping to different screens without user input any help out there

my ipod touch acts as though someone is invisbly ushing the buttons or moves from screen to screen without usere input

Try the standard fixes to rule out a software problem:
- Reset. Nothing wll be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/newiPod
If still problem you have a hardware problem and service is necessary.

AP 1242 WGB may be associate with mesh LAP 1522 in 5Ghz?

Hi,
It is possible to associate AP 1242 configured as WGB to mesh LAP 1522 in 5Ghz band?
Thanks.

Thanks Elliot.
I want to convert AP1242 to LAP1242 and then to mesh but i need enterprise wireless mesh licence on WLC.
If i have enterprise wireless mesh licence i want to know if this scenario is functional ?
In this scenario i want to transport 2 Vlans over mesh wireless (one of the MAP is LAP1242) network.
It 's possible?
WLC ------- Switch (Vlan10,Vlan20 ) ------- RAP (1522, 5Ghz, Ethernet Bridge ) ------- MAP (1522, 5Ghz, Ethernet Bridge) -------- MAP (1242, 5Ghz, Ethernet Bridge) -------Switch (Vlan10,Vlan20)

My mac mail inbox is acting funny. I receive an email from today and the window shows me an email from a different person and topic from 2011. How can I fix this? The mail appears correctly on my phone but not on my computer.

I receive an email from today March 13, 2013, but my inbox displays an email from a different person on a different topic received in 2011. It seems like some type of corruption but I don't know how best to fix it.

Hi. I checked on the order and it says the order is currently being processed and I should check back tomorrow. I'm mostly just concerned because I got an email saying the order was on hold, and I want to make sure it actually does go through and I'm not just waiting for a delivery that's not going to come. I'm still confused as to why I'd get an email saying I had to call the fraud department only to be told I shouldn't have called the fraud department.

I tried installing a new 4th generation shuttle to replace the one my husband lost it acts like it is syncing but it is not and nothing loaded

I cannot get my new 4th generation shuttle to sync. It says it is but it doesnt. This is a replacement for one that is lost

I cannot get my new 4th generation shuttle to sync. It says it is but it doesnt. This is a replacement for one that is lost

Hi. I setup an external hard drive on my AirPort Extreme to act as a central disk for multiple iPhoto libraries. I have a new iMac with iPhoto '11 and an MBPro with iPhoto '09. I'm getting an error message saying different versions. Ideas?

Long title. Sorry. It pretty much explains the situation. I'd like to have all of my photos from two (ultimately three) computers on this central file and be able to access them from any of the computers. The error message I get when I start up my MBPro is: "You can’t open your current photo library using this version of iPhoto" and, "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." It then forces me to quit iPhoto. I have tried the suggestion of holding down the opt key on iPhoto startup, but it doesn't seem to help.
Two questions:
Can I store multiple iPhoto libraries on the same central disc?
If so, how should I address the error message?
Thank you!

Hey Kappy, thank you for your help! Yes, I can open both libraries on the iMac without problem. I am still confused why the computer that created one of the libraries cannot open said library after it was moved to the external disk. Why is the iPhoto format not readable by all versions across the board?? The reason I'm pushing the issue is because in my household, we have an older MB, my wife's MBP, my MBP and now a new "family" iMac. The MB (circa 2007) has an old version of iPhoto, the two MBP's have iPhoto '08 and the new iMac has '11. It is my goal to have all of the photos that we've accrued over the years, located centrally, and accessible from all of these computers. Is iPhoto the most appropriate program, or would Lightroom make more sense?

Connectig an AP1131 act as WGB to AP root with two VLANS and two SSIDs

Similar Messages

Maybe you are looking for