Connecting 1st Gen i-pod to comp without firewire port

Does anyone know any way to connect a first generation ipod to a windows computer without a firewire port? Because it is first generation the i-pod only has a firewire port on it and is not compatable with a dock connector. Is there any cable i can buy which will adapt a firewire port to a usb port?
Thanks

No, if you want to use that iPod, get a Firewire card for your computer. I recommend the Adaptec Fireconnect 4300 for desktop PCs or the Adaptec Fireconnect 1430 for notebook PCs.

Similar Messages

How much to fix wifi on my 16gb 1st gen i pod touch

now my last chance to sort this problem out how much will it cost to fix the wifi on my 16 gb 1st gen i pod touch

If it's confirmed as a hardware failure, Apple does not repair iPods, but will replace the entire iPod for a flat fee; see the Repair Pricing section here:
http://www.apple.com/support/ipod/service/faq/
There are independent iPod repair services that may be able to replace the problem for less. Do a web search for "ipod repair". I'm not sure I'd spend any money to repair a first-generation iPod touch, though. It's too limited in the applications it can run now.
Regards.

How to import without firewire port on new MBs

Hi,
I have a Sony HD camcorder that can give video output via iLink (firewire) only. It has mini USB out, but it is for pictures only. I have the new MacBook that comes without firewire port. What are my options?
If this has been discussed eslewhere, please provide link.
Thanks,
Wobble5

If it is a MacBook Pro I am pretty sure it will have a FW800 port on the side.
It is a Square port on the side.
Go to the Apple Menu and select 'About This Mac' then click 'More Info' in the lefthand pane under 'Hardware' click on FireWire it will say 'FireWire Bus Maximum Speed 800 Mb/sec' if it is fitted or 'This computer does not have any Firewire ports' or similar if it does not have one.
But if you do have a MacBook Pro then I think they all come with FW800 ports. These will work with FW400 devices you just need an adapter something like this:
http://www.amazon.co.uk/Sonnet-Technology-FireWire-800-Adapter/dp/B0000CDJPQ/ref =sr11?ie=UTF8&s=electronics&qid=1253451211&sr=8-1
Phil

Video in without firewire port?

I bought a 13" Aluminum MacBook recently. I didn't read the spec carefully. I discovered only after I have receive the shipment that this MacBook no longer have the firewire port. Without it, how can I connect my Camcorder via the DV port?

Thank you for your suggestions. I think I would keep the MacBook even though the loss of the firewire was really a step backward. It was my own fault to assume that the firewire port would carry forward from the white MacBook. This MacBook is not my only Macintosh. I also have a old G5 iMac that can handle my camcorder fine.

OneStep asking for firewire connection-my Sony HDR-SR11 doesn't have firewire port. Help.

The question says it all. I wanted to use OneStep to move all my home movies to a DVD, but iDVD is asking me to connect via firewire and my video camera-a Sony HDR-SR11-doesn't have a firewire port. I don't want to go through the extra step of importing into imovie because that will take a ton of time. Any other suggestions?

Only 2 options that come to mind. The first is to do a one step from a movie (as opposed to a one step from from the camera) within the file menu in iDvd. And yes, you will have to export first from the video editing app (iMovie / FCP) prior to using iDvd's One Step. No way to avoid this when using apple's iLife.
The other option is to use a hardware approach; something like Sony's Dvdirect that requires no PC and burns directly to DvD-R at the touch of one button. Menus aren't as nice as iDvd's but the quality is very good. Try ebay if this option appeals to you. I picked up one for about the same price as iLife software.
Hope this helps but if not just come on back.

I have a 1st gen i pod touch and i cant get any apps can anyone help?

i have the latest i pod software but i cant download any apps? when i go to the app store it tells me i need the ios 4 software or something but i think my i pod is to old. am i out of luck or can i still get games?

Yes it can. You'll need to purchase and download the 3.1 update using this link.
http://support.apple.com/kb/HT2052
B-rock

Unable to connect 1st Gen iPod Touch

Hi, I have a first generation iPod touch that I use in my car to connect to my Parrot MKI 9100 bluetooth car kit, and I need to add some new music to it. The problem is that I just noticed it won't connect when I plug it in...not in my car, not to a charger, not even to my MacBook. Is there a way that I can troubleshoot, or is the connection broken? Anyone have any help they could provide would be awesome. Also, if the port is broken, will the Genius Bar even be able to fix it, or is this thing just on it's last leg?

After charging fro half an hour reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If still problem connect to its syncing computer and restore the iPod if the iPod shows in iTunes
- Next see if placing the iPod in recoverymode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
The Apple Genius Bar will not fix/replace your dock connector but they will help troublshoot the cause.

Appletv 1st gen: how to check HDD without remote?

i have three apple tvs which i'm trying to sell and i need to know hard drive size on them, but i don't have the remote to check.
any ideas besides buying a new remote?

Are they vivble in itunes under devices- if so the hard drive capcities will be lisetd.
They came in 40GB and 160GB versions with less actual usable space due to the usual hard drive size convetions used these days.
AC

Is it possible to connect MBPR with Cinema HD Display 30" 's Firewire Port for iSight

I want to buy a external iSight for my old Cinema HD Display 30" ,as i don't have enough space to open my notebook to use the built-in iSight camera.
I know they are very old item, but i think they have very beautiful design and great quality, i want to use them
I have already using the 30" Display by Dual Link-DVI converter, i don't have any firewire device, i don't know is it still work for using Thunderbolt (MacBook) -> Firewire800 (Adapter)-> Firewire400(converter) -> Cinema HD Display FW port -> external iSight
or is there any other solution for me?
or should i give up this setting
As i don't want to use other brand USB camera, other brand no need to consider.
Thanks for attention

mluk6328 wrote: I want to buy a external iSight ... I know they are very old item, but ...
Test BEFORE you buy. More discussion in this old thread: http://discussions.apple.com/thread/2450744 .

COMPATIBLE CAMCORDER & EXTERNAL HARDRIVE FOR MacBook WITHOUT FIREWIRE PORT.

Good Evening Ladies & Gentleman,
I have a MacBook(13" Aluminum 2008 version) that does NOT have a firewire port, just USB.
- As far as CAMCORDERS go, What Model and Brand is best compatible with it?
- Also, as far as EXTERNAL HARDRIVES goes, which ones will be most compatible with the MacBook 13" Aluminum version 2008?
- SUGGESTIONS WILL BE MUCH, MUCH APPRECIATED. THANKS.

Hey,
As for camcorders - I don't really think that there is any limitation caused by your Macbook. Perhaps every single model by all the wide-known manufacturers as Canon, Sony, Panasonic, etc. has a USB port, so you don't have to worry about firewire.
As for external hard drives - You can find a huge number of external hard drives that are 100% compatible with all Macs for sure, on the Apple Online Store.
http://store.apple.com/us/browse/home/shopmac/macaccessories/storage?mco=MTM3NjUyMDQ
Message was edited by: Martin Cervenansky
Message was edited by: Martin Cervenansky

What camcorder/DV transfer without Firewire port?

Afternoon all,
I bought my MacBook a couple of years ago. I was specifically told that my Sony HandyCam was compatible, however, didn't realise that I could only transfer via iLink and of course, MacBook has no Firewire port. iMovie doesn't recognise my HandyCam via USB at all.
1. Does anyone have any better ideas on how I can transfer DV to my MacBook?
2. I'm now looking to get a new camcorder. Any suggestions on where I can start my research on camcorders that will be compatible with my MacBook?
I'm grateful for any suggestions.
Kind regards.

Have you tried to simply copy the video to your desktop with a USB cable? You could then import that file into iMovie. You may find some helpful information here:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10331.html

Connect 2 external drives to 1 firewire port?

MacBook Pro 5 4 Mid-2009 15"
has 1 firewire port
1 USB 2.0 port with 2 more USB 2.0 ports on an external monitor
I've been running Time Machine on a 500 GB LaCie d2 quadra external drive and need to upgrade, probably to a 3 TB drive.
To transfer my backups from the old drive to the new one, I need to connect both to the MacBook. Can I connect both in a daisy chain to the FireWire port? Or do I have to connect one via USB and the other via FireWire?
Thanks.

You can either use a FireWire hub or connect one device through USB. If either drive has two or more FireWire ports, it can act as a hub.
(121173)

Capturing without a FireWire port

Apple stopped putting in a FireWire port in MacBook Pros. Now I can't
capture video. Tried using iEEE to USB but it won't recognize the camera.
Any workarounds ?

Apple stopped putting in a FireWire port in MacBook Pros.
Not true. All MacBook Pros, including the very latest models, support FireWire. Older MacBook Pros had a FW400 port, newer ones have a FW800 port. There are different plugs (connectors) but you can always get a cable to connect from your camcorder to the MacBook Pro FireWire port.
If your MBP has a FW800 port, this cable from monoprice.com is probably what you need.
Exactly what make/model camcorder do you have?

Apple TV 1st Gen can no longer connect to wireless networks

My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home. I rean the diagnostics at the reset screen and the Apple TV says it is performing normally. In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago. The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty. The issue is limited to the Apple TV. I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network" the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks. I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

Follow-up: Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
Next, disconnected the ethernet cable. ATV1 froze and was restarted using the Menu + ( - ) combo on the remote. Re-ran diagnostics yeilds: Apple TV is working fine.
Restarted, then went to configure the Wirelss settings. Apple TV once again does not show either of the two wireless networks. Selecting "Other..." and entering the SSID yields the same immediate response:
"There was a problem connecting to the network. Check your settings and try again. (-4)"
No change on the wireless front :-( Bummer.
Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
Thanks for your help. -- Paul

HT3199 connect iTunes on new macbook to apple tv 1st gen. library

On my formar macbook I had iTunes to synch with Apple TV 1st generation.
After upgrading to a new macbook pro with iTunes 11.0.3 I observe following problem:
1. on apple tv 1st gen. the library from my old macbook is there but in light gray, i.e. not connected to new macbook
2. when connecting new computer to apple tv 1st gen. it will create a new library (instead of connecting with existing library).
3. in iTunes, Devices Apple TV, only buttons "Settings" and "Photos" appear on top of window. "Music", "TV-shows" are missing.
How do I connect the two libraries, i.e. iTunes library on my new macbook with library on my apple tv 1st gen (last synched with my old macbook)?

AppleTV 1 was designed to sync with a single computer, but apart from untransferred purchases made on AppleTV, the sync was to AppleTv only.
You cannot make the new computer sync with AppleTV without removing the old sync connection on AppleTV under Settings>Computers. Doing this wipes the AppleTV of content tomprepare tobsync with a new iTunes library.
AppleTV1 also allowed streaming only from several computers other than the synced one - content will appear under My Shared Movies and so forth when the computer is on.
you really need to remove both computer entries from the Computers settings screen then re-add the new iTunes as a sync library.
Hopefully you have still got the old computer to allow you to copy media to the new one, or have copies of he media somewhere.
If most of your stuff was from iTunes Store then you should be able to redownload in iTunes.

Connecting 1st Gen i-pod to comp without firewire port

Similar Messages

Maybe you are looking for