Connecting 3560 with Dell 6248 for Storage Migration

I am looking at an old test and dev virtual infrastructure configuration that was set up with a 1GB Linksys Switch and a Dell 6248 Switch (attached pic is a representation).
The reason given for the Linksys in the config is it was the only 1GB switch available at the time when the SAN had to be installed and there were no more available ports on the 6248.Running Dell Dpack reports show latency issues when migrating from an EqualLogic Volume to a MD3200 volume and from the MD3200 to Md3200 volumes (on the order of 30-45 minutes for a 20GB VM). Migrating from EqualLogic volumes to EqualLogic volumes is in seconds.
I think the Linksys is the issue as does our Dell reps. We are looking at replacing the Linksys with a Cisco or another L2/L3.
I have a Cisco 3560 installed but am not familiar with configuration. I downloaded the Cisco Network Assistant (CNA) in order to configure the switch into the environment via a web browser. As noted in the infrastructure pic, the SAN traffic is isolated to VLAN 10 on the Dell Switch. In the second pic, I show the CNA and I am setting up a VLAN 10 on the Cisco switch and then want to connect the Md3200 to the Cisco which will be connected to VLAN 10 on the Dell Switch for access to an EqualLogic SAN
I am not sure I have the correct menu setting in the CNA for setting up VLAN 10 or if this is the best option?
Any help would be appreciated.
Thanks

Hi,
I have several E6420, O3010 and since a week also some E7440 and E7240 on site.
I never had issues using the current Dell PE package for MDT.
At the moment my PE contains only the drivers from the Dell PE 3.0 package (WinPE3.0-Drivers-A13-D67JC)
and all my systems mentioned abobe have no issues connecting to the deployment share.
(btw: I have also some older E6400, E6410 and O390 I do no longer support, they
are supported by the pack Dell-WinPE-Drivers-A05.CAB according
to the Dell site, but I just started a deplymenst on a E6410 and is is also workign with just the latest PE pack)
I'd
suggest you start over with your deplyoment share using at least MDT2012 Update 1.
Create a folder "PE" under "Out-of-Box Drivers" and extract latest Dell PE pack and import he drivers there
Create a selection profile e.g. "PE Drivers" and include just the "PE" folder created above
When configuring the Windows PE settings of your deployment share select "PE
Drivers" selection profile for the driver injection in the "Drivers and Patches" to keep the PE image free of not needed drives.

Similar Messages

Can i have a connected mode with lightroom 5 for my SONY SLT-A77V ?

can i have a connected mode with lightroom 5 for my SONY SLT-A77V ?
thanks for anwers.

Hi,
Haveee a look here for Tethered Camera Support: http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

Set up cisco SGE2010 combined with Dell 6248 switch

Hi, I have currently a Dell powerconnect 6248 switch combined with a netgear UTM router. I have a basic understanding on how things should work but I don't have the knowledge to apply it as I'm new to setting up vlan and the person before me did the basic configuration like this:
defined 5 VLAN in the netgear router
defined the same 5 VLAN in the dell 6248
connected the dell switch to the netgear router via a trunk port.
Right now all the inter vlan traffic pass thru the netgear router as the dell switch as a trunk port connected to the netgear box who then give dhcp and set himself as the default inter vlan route. I would like to stop that since I would like the cisco switch to handle all the vlan routing for both switch and those switch to send their dhcp request to my win2k8 server.
I did set the sge2010 in layer 3 mode from the small business telnet interface. I then setup the same 5 vlan in the cisco switch.
If I understand this well I need to define an IP address for each vlan interface on the cisco switch for it to be able to route things, I have set them all as x.x.x.3 (x.x1.3 vlan 1, x.x.2.3 vlan2, etc) Then I need both swtich to forward all dhcp request to my dhcp box wich is in vlan 2. My DHCP server will have 5 range of IP address to hand out. my server are connected directly to the dell switch on vlan 2. I have set up a port in the dell switch in trunk mode and did the same thing in the cisco switch and connected them togheter to send all vlan packet. The current setup doesn't work so I need some help to finalize that setup so that everything works.
If you need detail that I might have forgot to mention I wll gladly provide them.
Thanks !

For future reference, I finally succeeded in setting up everything the way I wanted it to be. I enabled layer 3 routing on the sge2010 switch, defined IP for each vlan interface, defined DHCP scope with vlan interface ip as the gateway. Added the ip-helper ip of the dhcp server on the sge2010, I defined 1 of the port on the cisco to trunk mode and added all vlan to it. I then defined all the same vlan on the Dell swith, added the ip helper address of the dhcp server for each vlan on the dell switch, defined a port on the dell swith in trunk mode and added all the vlan to it, connected both swith with an ethernet cable via the trunk port on each side and voilà all is working good. I finally had to define a static route in the cisco switch of 0.0.0.0 mask 0.0.0.0 with the ip of my internet firewall to gain internet access on both switch.

Connecting T530 with Dell U2713HM via DisplayPort, Windows 7 x64

Hi, I've been trying to get the full resolution (2560x1440) out of my new Dell monitor with no luck! Perhaps someone has an idea. I have previously connected to the monitor using a VGA cable (at 2048x1152) and a single link DVI via a Mini Dock Plus Series 3 docking station (at 1920 x 1080).
When I finally got a mini DisplayPort to DisplayPort cable, I was very excited to finally get the full resolution out of the monitor, but I have not been able to connect with this cable!
Both the Windows Control Panel and the NVIDIA Control Panel (for the NVS 5400M) indicate that the monitor is connected (i.e. it shows up in the Window), but neither allow it to be connected.
The Windows Control Panel responds with "Unable to save display settings" when I try to connect, regardless of whether to "Extend desktop to this display" or "Show desktop only on 2".
The NVIDIA Control Panel shows the monitor under "Display/Set up multiple displays" under "NVS 5400M", but does not allow me to check the box labeled "Dell U2713HM".
I tried installing the associated drivers and display management software from Dell, but this did not change anything.
So I am totally stuck! I googled around, but not found anyone with similar problems with solutions that actually worked for me! Ideas welcome!

Hello -
I was having the same issue and realized that I had not unlocked my phone (DroidX). Once I did that, it immediately showed up in the Windows device manager.
Good luck!

Connecting speakers with dell notebook

i am considering buying speakers with my dell notebook and i was wondering if all i-trigue systems and the inspire t7900 will connect with it without having to buy additional adaptors.will these speakers also connect with my zen touch. any help will be much appreciated.
Message Edited by briancrowley on 08-28-2005 08:41 PM
Message Edited by briancrowley on 08-28-2005 08:42 PM

briancrowley,
Notebook generally only have a single Line Output jack that provide stereo only. A 2/2.1 speaker system should be what you need to look for. If you planning to get a 7.1 speaker system like the Inspire T7900, you will not be able to connect all the speaker up. Alternative would be to get an external sound card like the Audigy 2 NX, Live 24 Bit external card that allow 7.1 connection.
Jason

Bluetooth connection problems with Dell Axim x51v

I have a Dell Axim x51v and it has Windows Mobile v5.0 on it. I am trying to connect the Axim to my MacBook via Bluetooth, but am experiencing the problem where the devices get paired, but are not connected. Infact, when I add the device, they get connected for about 10 seconds, then they disconnect and remain this way. I do have my MacBook firewall turned off and I enabled Bluetooth sharing. Can anyone help with this?

Does anyone know how to sync a Dell Axim that's running Windows Mobile v5.0 to a MacBook that's running Leopeard? I tried doing this with Bluetooth and USB via an application called "The Missing Sync" from MarkSpace and neither of them seem to work. Please help with this if anyone knows how to do it.

Connection/compatability with Dell Wireless

We just installed an AirPort Extreme and our non-Dell desktop and laptops are connected but desktops and a laptop that use a Dell wireless device are not recognizing the network. Is there a compatibility issue? Thanks in advance!

Your connection download speed should be about the same 8-9Mbits, whether you are wired directly to your modem, or wired through your router .
You said you reset the router to factory defaults and that it was working better. Did the download connection speed through the router go to 8-9Mbits/sec ? If it is still 5-6 Mbits, then this suggests that something in your modem-router system is not setup quite right. If you still have this slow speed problem, then please post the following info:
1) Your ISP (internet service provider)
2) Your modem model number and version.
3) Open your router's setup pages, and go to the Setup tab. List all your settings in the "Basic Setup - Internet Setup" section.
4) List the operating system (Windows XP, Win 98SE, etc.) on the wired computer that you are using for the test.
After you list this info, hopefully someone in this community will be able to guide you to optimizing your settings, given your ISP and equipment.

HT201320 after syncing my iphone4s with itunes on my laptop i have lost all my emails & pop3 email settings, how can i get it back, its also supposed to be backed up on icloud with extra paid for storage

I have used my force9 emails for a few years with now problem on my laptop and also for maybee 6 months on my iphone4s but after syncing with itunes on my laptop i have lost all the emails & email setting of my phone.
I also back up on icloud and tried looking on there on my laptop but there is only my icloud emails and not my pop3 force9 emails . There are all my contacts there butwhy does it wipe my emails and settings and how can i get them back.
many thanks
monoboard

Restore your backup.

One connection user with full rights for a bunch of schemas

How can I give all rights of one user to another without declaring each object privilege one by one? For my application I would like to devide the data to maintain into four different schemas to. Never the less I would like to connect to the db by one account and have full access to all of the four schemas. My client denies to give the connect user DBA rights. The connection user is not allowed to have "ANY" grants, either. But my application often creates tables, views etc. and drops it when they aren't usefull any more. So it is nearly impossible to manage the grants on each db object one by one. So, how can I give a user all rights for a bunch of others?

My program uses logical "firms" to allow separation of clients client data. Sounds like Row Level Security - or even Views - would be saving you some grief here.
The most dynamic created tables are used to optimize performance for (sub-)queries builded at runtime by the user. Do you really have benchmarks to prove that building tables through dynamic execution of DDL results in faster response times than plain queries? Are the query structures some various that temporary tables won't do?
Cheers, APC

Connecting WRT54g with Sprint aircard for desktop and laptop

I am trying to setup my router with my sprint aircard on my desktop so that both my desktop and laptop can get internet. Does anyone have an idea on how to do this. i have been trying for a week now and cant get it. I have read messages every where and people say you can do it. I just cant figure it out. please help.
Message Edited by dgrev16 on 02-02-2008 03:58 PM

you should be able to plug you desktop into one of the numbered ports on the back of the router, that will get the desktop going, if it has an ethernet port, now with respect to the laptop, is the sprint aircard for wireless web that you pay for monthly or your adaptor to use for the router, if you pay monthly for the sprint aircard that is good and you should be able to use the laptop anywhere you want and there is sprint service to get online, does your laptop have a wirless card built in? if so you could use that to get online, let us know what you have and we can provide more support.
Felipe Diaz
using WRT600n

How to use old TC with new TC for storage only?

Bought a 2TB TC and I still have my older 1 TB. Is their any way to use the older time capsule as a hard drive only and have that TC backed up along with my iMac on the new TC?

Basically the answer to this is NO!!
You can set it up but not the way you are thinking.
The TC is now and forevermore a network drive. You can therefore bridge the TC and plug it into your network. The obvious place being your new TC. You can also turn off the wireless in the old TC.. it is now a network accessible hard disk.
But Time Machine has a huge limitation.. it cannot backup network drives. So your TC cannot be backed up with your iMac to the new TC. Not by Time Machine. You can buy a different backup software.. eg CCC is excellent and use that.
Overall the TC is slower and less reliable than a USB drive plugged straight into your iMac.. especially if the iMac is newer type with USB3 ports.
And the USB drive is local and so it can be backed up by Time Machine. (Must have HFS+ format and be included in the backup).

How to increase storage migration job timeout in SCVMM 2012 R2

Hi,
I needed to move a VM 2+TB in size on slow storage to another volume. The VM was turned off. The VMM job failed after 9 hours and 23 seconds with following error:
Error (2924)
Unable to complete the request. Operation on the hyperv1.company.local server timed out.
Recommended Action
Try the operation again.
VHD files were copied to destination successfully, but were not removed from source and also the VM was not imported from the destination location.
So it looks like there is 9 hour default timeout for storage migration jobs in VMM.
How to increase this timeout?
Thanks,
Egils

Brian,
If you got the same timeout error sooner then my assumption that this is 9 hour file copy timeout was wrong.
In my case the files were copied successfully, the VM was was removed from Failover Cluster and Hyper-V (unregistered in source location), but was not registered in destination location, so it might be that timeout occurred during registration of the VM in
destination location.
Unfortunately the SCVMM error message does not include any details about the timeout.
Btw, there are some SCVMM timeouts that can be changed, like
http://support.microsoft.com/kb/2790310
http://blogs.technet.com/b/vishwa/archive/2011/02/01/tuning-scvmm-for-vdi-deployments.aspx
and WinRM timeouts
http://blogs.technet.com/b/jonjor/archive/2010/04/21/intermittent-connectivity-issues-and-cluster-refresh-times-with-windows-2008-r2-and-scvmm-2008-r2.aspx
Egils

CTI Integration with SAP Cloud for Customer

HI,
Can some one help me how to connect cti with sap cloud for customer.

Hey Achyut,
Cloud for Customer supports CTI and their is an official document for the same as well.
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000101184&_SCENARIO=01100035870000000202&_OBJECT=011000358…
You can find related docs on service.sap.com/cloud4customer
Thanks,
Ravi

Connecting java with macromedia shockwave

I wanna make an application that connect java with macromedia shockwave, for doing example...
administering a web chat., or a game. I dont wanna sound like a fool a dummy but i think java is safer than macromedia in security aspects.
I wanna do like a multicap application, macromedia is the visual chat, means people dont have to download all the jre to their computer, and a app in java , in the server that manages the users in the chat, the users permissions, and so. like a better "habbo hotel" chat
"The goal of Flex is to allow Web application developers to quickly and easily build rich Internet applications. In a multi-tiered model, Flex applications serve as the presentation tier."

have you tried searching the forums for threads relevant to your problem? There
are many discussions in the forum regarding this one. :)

SAP Data Storage Migration from HP EVA SAN to NetApp FAS3070 FMC for M5000s

Good day all
We are needing to perform a storage migration for SAP Data that is currently on 2 HP EVA SANs. We have 2 SUN M5000s, 2 SUN E2900s and a couple of V490s, that all connect to the SAN via Cisco 9506 Directors. We have recently commissioned a NetApp Fabric Metrocluster on 2 FAS 3070s, and need to move our SAP Data from the EVAs to the new Metrocluster. Our SUN boxes are running Solaris 10. It was suggested that we use LVM to move the data, but I have no knowledge when it comes to Solaris.
I have some questions, which I hope someone can assist me in answering:
- Can we perform a live transfer of this data with low risk, using LVM? (Non-disruptive migration of 11Tb)
- Is LVM a wise choice for this task? We have Replicator X too, but have had challenges using it on another Metrocluster.
- I would like to migrate our Sandbox, as a test migration (1.5Tb), and to judge the speed of the data migration. Then move all DEV and QA boxes across, before Production data. There are multiple zones on the hardware mentioned above. Is there no simple way of cloning data from the HP to the NetApp, and then re-synching before going live on the new system?
- Would it be best to have LUNs created with the same volume on the new SAN as the HP EVA sizings, or is it equally simple to create "Best Practise" sized LUNs on the other side before copying data across? Hard to believe it would be equally simple, but we would like to size the LUNs properly.
Please assist, I can get further answers, if there are any questions in this regard.

Good day all
We are needing to perform a storage migration for SAP Data that is currently on 2 HP EVA SANs. We have 2 SUN M5000s, 2 SUN E2900s and a couple of V490s, that all connect to the SAN via Cisco 9506 Directors. We have recently commissioned a NetApp Fabric Metrocluster on 2 FAS 3070s, and need to move our SAP Data from the EVAs to the new Metrocluster. Our SUN boxes are running Solaris 10. It was suggested that we use LVM to move the data, but I have no knowledge when it comes to Solaris.
I have some questions, which I hope someone can assist me in answering:
- Can we perform a live transfer of this data with low risk, using LVM? (Non-disruptive migration of 11Tb)
- Is LVM a wise choice for this task? We have Replicator X too, but have had challenges using it on another Metrocluster.
- I would like to migrate our Sandbox, as a test migration (1.5Tb), and to judge the speed of the data migration. Then move all DEV and QA boxes across, before Production data. There are multiple zones on the hardware mentioned above. Is there no simple way of cloning data from the HP to the NetApp, and then re-synching before going live on the new system?
- Would it be best to have LUNs created with the same volume on the new SAN as the HP EVA sizings, or is it equally simple to create "Best Practise" sized LUNs on the other side before copying data across? Hard to believe it would be equally simple, but we would like to size the LUNs properly.
Please assist, I can get further answers, if there are any questions in this regard.

Connecting 3560 with Dell 6248 for Storage Migration

Similar Messages

Maybe you are looking for