Connecting 3rd party devices to my computer

How do I connect lap tops and i phones to my imac so that they can access app stores etc?

Like I said before, you can connect 2 iPods to one computer. However, there are multiple options. If you don't care whether some of his songs are on your iPod, and vice versa, you can use the same user on the computer. Now... If you each want your own library, there's two ways you can set this up: #1 - Create a new user on the computer, and install iTunes 7 there. Then, one of you use one user, and the other can use the created one. The songs can be different on in iTunes on either user, it'w a whole new library. #2 - If you don't want to create a new user on the computer, you can set your iPods to "manually update songs" so that iTunes doesn't automatically put all the songs in the library on the iPod. With this method, you have to manually drag songs you want from iTunes to your iPod icon in iTunes. That way, you can selectively put your songs on your ipod and he can put his on his iPod using the same library.
Hope this helps

Similar Messages

  • Use of files dowloaded from i-tunes store on Roku (3rd party device)

    Hello,
    I have a Roku soundbridge system which play my music from my Mac compute r(via wifi). Unfortunaley it does not succeed to play the files bought on i-tunes store as it says they are protected. How can i take out the protection or have it read by my system. On roku site, i only find "apple does not allow streaming of files downloaded from their music store to 3rd party device." Is there any solution for me to listen to the albums i have bought on my system??? thks for your help

    Sorry, but as Roku's web site says, no third-party devices can play tracks purchased from the iTunes Store. Tracks from the iTunes Store can only be played in iTunes or QuickTime Player or on an iPod, Apple TV, iPhone or iTunes-equipped Motorola cell phone.

  • 3rd party device support

    Hi,
    Is there going to be any change in the way MARS would support 3rd party devices (non-cisco) like checkpoint, Intrushield etc in future?
    Thanks in advance,
    Valsa Raj

    1. Discovery supports many non-CDP modules such as ping sweeps, ARP cache lookups, and routing table lookups.  However, Topology Services still requires CDP to build interconnections between devices.
    2. Yes, non-Cisco devices will show up on the Topology Map with a generic icon.
    3. There is no restriction except it has a maximum of 50 devices.
    4. The Fault component of LMS 4.0 can integrate with HPOV NNM.

  • PI2.1 3rd Party devices

    Hi,
    I have recently installed a HA pair of PI2.1 NCS appliances and so far so good.
    I have a number of 3rd party device that I would like to add.
    I have uploaded the specific MIB's for these devices and created Custom SNMP templates to use to monitor them. These templates have been deployed via "Monitoring Deployment" on the 3rd party devices.
    The question I have is where can I now see the detail that PI is retrieving when it SNMP polls these 3rd party devices using the custom template.
    I would have thought it would be visible in the Device Work Centre when you click on a device, like it is with the Cisco ones but nothing else is showing except for the usual IP address, product family etc  information.
    Any ideas ?
    cheers
    Rich

    Changing the local ssh client to v2,1 doesnt work.
    You need to change /etc/ssh/ssh_config
    # Protocol 2,1
    >>> comment out
    not the sshd_config, this will change the SSH-access to the PI-server self.
    In our case we extended the vty input to telnet for the few older ssh1 only image devices
    Steffen

  • HT204368 Can you (Handoff) control your iphone with 3rd party devices ? (Like making calls, sending message, etc...)

    I am wondering if you can control your iphone or other iOS devices with 3rd party devices? I have in mind like making calls, sending sms, etc....
    Thank you!

    No,

  • Problems connecting 3rd party webservices from workerrole

    Hello,
    I have the problem that since 2015.01.28 ~22:00, my service deployed as a workerrole in an Azure instance cannot reach 3rd party webservices. This was a sudden issue as it worked for half a year without any changes.
    The 3rd party webservices work fine, I can reach them from my development environment without any trouble, the provider of these webservices also could assure me that it works fine for others.
    The call that fails is a simple WebClient call (with credentials) to a URL in order to read a (tiny) file and take followup actions.
    The call fails with the following error:
    System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond
    after a period of time, or established connection failed because connected host has failed to respond <ip:port>
    The question: have there been any changes recently, either in the Azure services environment or networking that could explain this?
    If i connect remotely to the instance and attempt to make the calls manually via IE, they succeed, but very slowly.
    I have deployed the service to another datacenter as a test, so right now I have one running in East US and Western Europe, but both face the same issues. The service is running on Azure SDK 2.1, the instance is running on windows server 2012R2.
    The service works fine when I run it on my development environment via compute emulator. No connection issues.
    Any help is welcome, thanks ahead.

    Looks like a timeout issue. Try to increase timeout of your call to see if you get any success. If OK, then for sure it is timeout problem. Then check if it is DNS problem. Use IP address to call instead of hostname. You mention it is slow in IE. Where
    is IE located? You can also try to call using IP address instead of hostname to see if it speeds up. Is it slow only the first call?
    Frank

  • ISE iPEP + 3rd party device VPN bridge or route mode

    Dear All,
    I would like to get some advice from the community regarding my idea.
    We would like to integrate ISE iPEP with a 3rd party VPN device using bridge mode.
    However i can only find documents describing the following scenarios,
    - routed mode with VPN device
    - bridge mode with Wireless Controller
    So the questions is that is bridge mode supported if i would like to integrate ISE iPEP with a 3rd party VPN device or is it even possible to achive this kind of deployment?
    Thank you in advance.
    Best Regards,
    Erik Molnar

    Thanks for the reply Marcin.  Both of your suggestions are good ones, however in this scenario both DC firewalls are alive at the same time, so there needs to be some kind of logic on the device at the remote site to say that it should only use tunnel B if tunnel A is down.
    Thinking on this, is it possible to run an 'interface' or 'routed' mode IPSEC VPN with the ASA?  I know this is possible with the Fortigates and think it's the default mode for Junipers.  If that were possible we might be able to have both tunnels up and have OSPF run over them which would be another way to solve this problem.

  • 3rd party software for new computer

    My old computer is no longer available. I have a new computer that I need to download iTunes onto. The problem is that I need some 3rd party software to be able to sync the 2500 songs from my 80GB video ipod to the new computer. I don't really want to pay for this software. Any suggestions on free software that is reliable to download? Thanks.

    You can read reviews and comparisons of some of the utilities here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers

  • Connecting 3rd Party via Saprouter

    Hi experts,
    is it possible to connect a 3rd party via saprouter to our sap-systems?
    Or is it just possible to connect SAP to the systems?
    I already found one entry in SCN, however there was also no solution provided.
    Kind regards

    Hi Christian,
    To connect your SAP system a 3rd Party needs SAP GUI setup at their end & you can provide the sap router string to connect your system via SAP GUI.
    For security purposes you can configure sap router string with password option(authentication to access SAP system),so that after confirming job/consultancy by 3rd party you just need to change the password under router string only in regards no one can access your SAP system/network.
    Hope this will help you.
    Thanks,

  • Connecting 3rd Party Monitor to iMac 2.8 Intel Core i7 27"

    Hi Hope somone maybe able to answer this question?
    I would like to connect my Dell monitor to my iMac as a 2nd screen, it has VGA, HDMI, & DVI ports. What would be the best way, can I simply purchase a mini-display port > DVI or VGA adapter or would I require a Dual Link Adapter?
    Thanks in advance
    Mike

    A mini display port cable to either HDMI, VGA or DVI would be fine. The best way to to purchase is to buy it directly from Apple that way you know you are getting a high quality cable that has been well tested.
    BTW, your manual says:
    One or two Thunderbolt ports (high-speed data, video, and audio)
    Connect Thunderbolt-compatible devices for high-speed data transfer, or connectan external display that uses Mini DisplayPort. You can purchase adapters to connectdisplays that use DVI, HDMI, or VGA. The 21.5-inch iMac has one Thunderbolt portand 27-inch iMacs have two.

  • How to trace Logs for WebService connectivity - 3rd Party to ECC

    Hi Experts,
    Basically it's a simple scenario, the 3rd party will send a soap request with the information in it and wiill be sent to ECC and be written on a table.
    I'm wondering on how to trace logs on the soap request sent from 3rd party to an ECC environment. I used Altova XMLSpy and soapUI and  to create a soap request from wsdl created in SOAMANAGER. Both of the software returns a response. Do these both of these software really sends data (soap request) going to the binded address or it's just i simulation that wsdl created is valid.
    Cheers,
    R-jay

    Hello,
    These third party tools send web service requests to SAP system. You can trace Service invocation and download the request and response payloads using SOAMANAGER. In Logs and Trace tab,  edit the Trace configuration with suitable trace level and expiration time.
    Thanks,
    Venu

  • Line in for itunes - Use computer audio in or 3rd party device

    I wanted to know if there were any devices or a way to get something recognized by itunes that you could plug in something like a live band, that would be recognized as a device and then just select that device and it would play the audio from that thru itunes.
    The reason for this is I use apple remote and airport expresses throughout my house to play music. It would be nice to be able to pipe in sound from another source and select it thru apple remote and play that audio thru the airportexpresses.
    For example, someone brings over a record player and we hook it up, plug the RCA outputs into the device or line in on the computer. Then when itunes is opened the device/line in shows up as a source, and I guess to fit into apples schema, there would be one "song" on the device and it would just "play" that which would then send the incoming sound thru itunes and play over the speakers thru airportexpress.
    Im suprised there is no device or option to play "line-in" or maybe there is a way to have the sound line in of the computer be used. Im sure there are lots of applications for this.  I suppose its possible apple doenst want this option but maybe someone out there has some kind of work around to accomplish my goal.
    Thanks
    james
    Maybe it could be something line a live podcast or personal radio station that could be set up. I just thought of this looking at the catagories.

    I eventully figured out how to do this. It cant be done in Itunes. You have to use airfoil not itunes to broadcast to the airtunes speakers. You can select any input or program to supply the sound.  If you want to control this from your iphone you need to install ReeMote and the ReeMote server on your mac to control airfoil Volume, you can not control the input selection from the reemote application.  This must be done on the Mac but it defaults to the previous selected input all the time on startup.

  • Connect two apple devices to one computer, how?

    i have an ipod touch connected to my comp. but iwant to connect my daughters ipod nano also, any clues anybody?

    Yes.
    Open itunes, connect ipod touch, select what you want to sync, sync, disconnect ipod touch.
    Connect ipod nano, select what you want to sync, sync.
    You can sync as many iphones, ipods, ipads as you like to one computer.

  • Trouble connecting 3rd party monitor to MacBook..."OSD Locked" message?

    I am trying to connect my LG monitor to my MacBook air. This monitor worked w/the last MacBook I had (2008 model) and yes, I am using the right cable. The background on the monitor is the same as my MacBook (starry galaxy image) however there are no files. When i tap any button on the monitor (e.g., menu, engine, source, auto/set) I get the message "OSD Locked". I have a feeling this is a setting from my MacBook. Any ideas?

    Hey wrtrgrl,
    Thanks for the question. It sounds like everything is up and running, your preferences may just be set to Extend your Desktop (as opposed to mirroring). Try configuring your preferences to mirror:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    Thanks,
    Matt M.

  • Ethercat 3rd Party Device Profile XML File not complete

    Hi all,
    I'm trying to use a Schneider LXM32 servo drive coupled to a NI cRIO 9074 Ethercat master.
    The problem is that my LabVIEW project is not showing me the full device profile.
    There are 4 available PDO for this device :
    1) Cyclic Synchronous Position
    2) Cyclic Synchronous Velocity
    3) Cyclic Synchronous Torque
    4) Free switching beetween 1) 2) or 3)
    BUT, I only see the firts PDO parameters after importing the xml file. If I open the xml file manually, I see that all the PDO are available.
    The xml file is available in this post.
    Of course, I need to operate in the 4) mode, not the 1)
    Help me, please....
    Sébastien MICHAUD
    CLD
    Attachments:
    Schneider_Electric_LXM32M_V114.zip ‏18 KB

    Hi,
    Thank you for your answer.
    I successfully modified the XML file of my Schneider drive :
    Now I have a lot of others problems (I have made a request on NI France, I supposed you are the one who phoned me today).
    1) The XML file of my LTi DRiVE (another drive of the test bench) is done like this (see attachment):
    1) I can't move the Sm tag because it's already everywhere
    2) I don't understand why 4 devices are exposed.
    Additionnaly, see below the LabVIEW project with this device :
    3) The I/O exposed for the 2 Devices (Schneider and Lti) are shared variables. But I want to poll these I/Os every 125µs. The scan engine can run at 1 ms. So, if a put a "percentage of each scan period" to 1% (the default value is 40%), will I be able to poll every 10 µs ?
    In this example :
    https://decibel.ni.com/content/docs/DOC-11191
    The scan period is 4 ms at the best, so with 40% of each scan period, it represents 1.6 ms.... am I correct ?
    4) Is it necessay to use NI SoftMotion (https://decibel.ni.com/content/docs/DOC-11191) to get/set data to a motor drive ? Is it much more easy with NI SoftMotion ?
    Thanks,
    Sébastien MICHAUD
    Attachments:
    LUST_22_SO.zip ‏2 KB

Maybe you are looking for