Connecting 3rd screen

Well hello everyone,
I've been trying for some time to connect a third screen to my computer. Currently I'm working on two screens. I'm using a HP pavillion g7 with an Intel HD Graphics 4000 graphics card. This graphics card should be able to handle 3 screens, which is why I've already requested support at intel. They confirmed a 3rd screen to be possible with their drive. However it may not be with the computer which is why I've been refered to this place.
So my question kind of is: is it possible to enable a 3rd screen (2nd using VGA and 3rd using HDMI) to my computer? And if yes, what do I need to do in order to enable it.
Many thanks for your time!

Hi,
Normal laptops do not have enough ports for you to connect 2 external monitor, a splitter won't help. You need some sorts of dock and you can connect similar to the following image:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook. When I do this nothing happens. Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine. Any ideas what I'm doing wrong? Do I need to enable something on the Macbook?

An update...
I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
So -- anyone get through this connection problem and have any ideas to share??
iMac Mac OS X (10.4.7)

Remote desktop connects, black screen, disconnects after a few seconds

I have several servers running Windows Server 2012 R2. These servers are used for testing, and are members of a domain which has two DCs, each of which are running DNS Server.
Yesterday I noticed one of the servers was having an issue with its remote desktop connection. If I try remoting into this machine, it connects to a black screen, sits there for 2-3 seconds and then promptly disconnects. No error message is given. I tried
this from a couple different Windows 7 machines, and got the same result. I tried from my wife's iMac, which runs Jump Desktop, and too was met with the same result.
I can, however, remote into this machine via RDP from my work-issued laptop, which is running Windows 8. However, I cannot remote into the problem machine via Remote Desktop Connection from one of the 2012 R2 servers--I am met with the same result as the
other machines: connect, black screen for 2-3 seconds, disconnect without error.
I can remote into all of the other 2012 R2 servers without issue from any machine, including the iMac. I am experiencing this problem on one server only.
Since it is a test server, I reinstalled Windows from scratch this morning. This meant formatting the SSD and wiping everything out. I reinstalled the drivers, joined the server back to the domain and installed all of the updates available from Windows Update.
And rebooted. And yet, the problem persists!
I tried troubleshooting the "usual suspects," like turning off Windows Firewall, disabling antivirus software (currently none installed), disabling IPv6, setting a static IP instead of using DHCP, etc. I did notice the network adapter said it was
on a Network, not a Domain Network. I corrected DNS settings, and the network reidentified itself as being on the ParietalBone.net network. And yet, the problem persists. Remote Desktop to this server still yields a black screen for 2-3 seconds, followed by
a disconnect--EXCEPT from the aforementioned Windows 8 machine.
I looked in the TerminalServices-LocalSessionManager log on the offending server, and there are no errors. I only see repeated entries that say "Session X has been disconnected, reason code 12," where X is 1 or 2. On a couple occasions, the reason
code is 11. But I don't see any errors indicating a breakdown in security negotiation.
Without any robust logs or debug details, I'm at a loss of where to look for a solution.

I am cautiously optimistic that this may have been resolved.
The network card in the computer was only a 10/100 built-in card, so I replaced it with a 1Gbps card. Interestingly, this did NOT resolve the issue. I ran netsh to check on the state of the chimney offload, but it was already disabled.
In the network card properties, I changed the link speed and duplex from automatic to 1Gbps full, re-ran "netsh int tcp set global chimney=disabled" and rebooted. The problem persisted.
And so I went to the network card properties and set IPv4 Checksum Offload, Large Send Offload (three of these -- IPv4, v2 IPv4 and v2IPv6) and TCP Checksum Offload (IPv4 and IPv6) to Disabled. Jumbo Frames were also disabled. I rebooted again.
After the subsequent reboot, I was able to connect to this Server from machines that previously gave me difficulty. The only machine I haven't been able to test today (I'm in the office) is my wife's iMac, which is at home. However, I was able to bring this
server up via Jump Desktop on my iPad, so I'm suspecting that perhaps one of the offload options was to blame. I'm not sure why this would allow me to connect from some machines but not others. And as noted above, I have many other machines running Server
2012 R2 and they are NOT experiencing this problem. And I've not done any tinkering with network settings on any of them, so their chimney and offload settings are all in the default configuration.
Regarding the other items -- NIC team, virtual machine, etc. -- there was no NIC team, no SRIOV and no RDMA involved.
I had to turn IPv6 off on this machine, and only on this machine, because having it enabled was causing a lot more problems. DNS registration would keep failing, it couldn't pull Group Policy, it couldn't get time sync with the DC, etc. The servers are all
set up with static IPv4 addresses. The router supports IPv6 but I'm not actually using it, so disabling IPv6 wasn't a concern to me.

Yellow tint! the 3rd Screen of my iMac 27, it's getting worse and worse...

Hi everyone not sure if there is anything more i could do with this, I have a 2010-13 week iMac, it came with a 'bearable' yellow tint problem from the beginning, after a hard drive failure i had to send my iMac back to Apple care, i was hoping the screen problem had been solved so I asked them to replace my screen as well, it came back with a worse panel showed much larger area of yellow tint...
Then I decided to wait for a few months until a week ago before my holiday i called for another exchange, was hoping for a perfect screen after my holiday, now holiday is over and iMac is back, just right after I pressed the power button, the start up screen with apple logo clearly tells me that i have got a even more disgusting panel - the worst of all i have to say, a new uneven shadow line on the bottom plus the usual yellower tint spreads over the middle of the screen, oh yes, they decided to make it even worse, a big dead spot as well in the corner ....
after a few hours, when i was editing a photo in Aperture, I have discovered something even more disturbing, from right edge of the screen inwards there is around 8cm wide vertical band shows obvious brighter tone than the rest of screen...
I do a lot of black & white photography plus a lot 3D graphic work, for a while I had tried to live with the yellow issue until it got really frustrating - now i have to once again arrange an exchange as this one is just unbearable!
Is this really Apple? Hard drive failed after a year and this is the 3rd screen of the iMac, and it just gets worse...
I wonder if there's anyone who had the luck to get the yellow screen replaced by a decent one?

Are you talking about a mid-2011 iMac or a 2010 iMac?
As it seems, the issue of color inconsistency of the iMac display is far from solved. Yellow tint, uneven brightness, light-leaks are very easily found even of newer models. I have a two-week-old mid-2011 27-inch iMac that I tried to replace for a new one because of yellow tint issue. It turned out that the replacement iMac had a worse screen... So I kept the first one. Not sure if the right thing to do is just get the screen replaced. It seems users have done it with no success...
So, I guess these problems are structural on the iMac line. They seem very much to be omnipresent. And I don't see Apple offering a genuine/trustworthy solution through its in-warranty support.

Connecting external Screen with Toshiba DynaDock U3

Hi,
I have the following issue:
Bought two external Screens (Dell U2412M)
Notebook: ASUS Zenbook
Dynadock Station U3
Now, I connected the first Screen with DVI to the DynaDock and it works perfectly.
The Dockstation has only 1 port for DVI, so i had to connect the second Screen through HDMI, but unfortunately my dell Screens do not have HDMI Connection, but displayPort. so I bought a cable which can connect Displayport to HDMI. And i connected the Screen displayport with HDMI to the DynaDock.
Unfortunately my device do not recognize the second external Screen.
I have no idea why it is so.
Hope some kindly Person can help me.
Kind Regards,
Alessandro

>I have no idea why it is so.
Possible its not Dynadock issue
You should firstly check if the cable you bought is OK and would work without the usage of Dynadock
Connect an external monitor to HDMI port using this cable and check if it would work properly.
and just to confirm: the Dynadock U3 can handle up to 2 external monitors simultaneously.

HOW TO JUMP TO 3RD SCREEN....

HI all,
How to jump to 3rd screen with out inputting values in mandatory fields in first 2 screens
while doing recording process in bdc.
regards
anilreddy

Hi Anil..
In SAP transactions it is a must to Pass the Values to Mandatory fields.
So you must enter the Values of mandatory fields in first 2 screens to process 3rd screen.
But still if u want to avoid this.. only way is:
Create a Transaction variant in SHD0 (for ur Tcode) .
here you can Make the fields as optional or You can hide the Screens.
Create Tcode ( type variant transaction) in SE93 for the Transaction variant.
Use this Tcode in BDC.
<b>reward if Helpful</b>

Creative vision:m won't go past the 3rd screen on start

Hello, this is my first post and I just got the creative vision:m for xmas and it was working fine, it has never been dropped and spends most of its time in the pouch. But when I try and start it up no it gets the the 3rd screen and just stays their frozen with all the buttons lit up and the backlight on. I tried the recovery mode and did the clean up and that didn't work, my comp also doesn't recognize when it is plugged into it for some reason, I mean the comp will recognize it but the creative programs won't recognize it so I can't even upgrade the firmware and see if that is a problem.
If anyone can hel that would be amazing because this is very frustrating.
Todd
Edit: I just tried plugging it into my sisters computer and it didn't detect it either, so the problem is definatley with the play, THIS SUCKS!Message Edited by tmrathie on 0-4-200709:07 PM

thats what I figured, bah and its like 2 weeks old, at least its still under warranty.
ThanksMessage Edited by tmrathie on 0-6-200706:27 PM

I have two Thunderbolt Displays connected to my MacBook Pro, can I also use the built in MacScreen as a 3rd screen?

Thunderbolt Displays are daisy chained

It depends on what MacBook Pro and video card you have. What I have seen is this:
MacBook Pro with Retina display can drive four screens simultaneously
New MacBooks can manage many, many monitors

Satellite P750 - Unable to connect external screen via VGA port

Hello All,
My problem is following:
I have been trying to connect my P750 (running on W7 x-64) to an external screen using the VGA port/cable. Unfortunately the external devices does not recognize my laptop. Laptop does recognise the external screen, you can see it in the graphic settings as additional display, but the screen says "no signal".
The computer always identifies the screen correctly, so it looks like there is communication from the screen to the PC, but not the other way round.
This has been checked with 3 separate screens and a TV - always the same. All the screens work properly with different PC's.
I already did:
- try to play with FN+F5 / "windows"+P buttons - no change
- install the latest BIOS and Video drivers from Toshiba website - no change
Any suggestions how to make it work? Is it possible that the VGA port is faulty?
Thank you in advance.

Hello and thank you for the tips,
I did try the options you suggested unfortunately with no success.
I actually got myself HDMI cable and this connection is working perfectly well. Luckily the very screen I want to attach my laptop to does have HDMI port. It is just a bit annoying to know that the d-sub port seems to be useless.
The lady from Toshiba tech support call centre suggested either OS re-install or sending it to Toshiba for repair/check as it is still under warranty. None of this options suites me at the moment, so I will probably stick to the HDMI. Still, I have a feeling it is a software rather than hardware problem.
Cheers

Can't connect via Screen Share or Web Server, but can ping and ssh

Bit of an odd problem here.
My Mountain Lion Mac Pro (called "Trogdor" for convenience) is connected to my work university network. I can ping it from anywhere-- elsewhere on the network, from home behind a firewall. Can connect over ssh from everywhere. I can also connect to other computers (on the same network or at home behind a firewall) from Trogdor via ssh, Screen Sharing, etc.
But I can't Screen Share into Trogdor, and I can't connect to Trogdor's built-in web server, either system-wide (in /Library/WebServer) or for my username (~/Sites). (I can connect to the web server from Trogdor.)
Note that I can do both of these for other computers on the same network (same subnet, etc), so it's not a network issue. I can't do these from anywhere: same network or from home. I have this problem whether I use Trogdor's hostname or its IP address. (I can look up its hostname using the IP address with the "host" tool in Terminal, and vice versa.)
So it sounds like a port issue, right? Except I don't think I've ever messed with my port settings directly. How do I diagnose the problem? Should I scan my ports? Can I return port settings to default?
Thanks!
Message was edited by: supercres

Bit of an odd problem here.
My Mountain Lion Mac Pro (called "Trogdor" for convenience) is connected to my work university network. I can ping it from anywhere-- elsewhere on the network, from home behind a firewall. Can connect over ssh from everywhere. I can also connect to other computers (on the same network or at home behind a firewall) from Trogdor via ssh, Screen Sharing, etc.
But I can't Screen Share into Trogdor, and I can't connect to Trogdor's built-in web server, either system-wide (in /Library/WebServer) or for my username (~/Sites). (I can connect to the web server from Trogdor.)
Note that I can do both of these for other computers on the same network (same subnet, etc), so it's not a network issue. I can't do these from anywhere: same network or from home. I have this problem whether I use Trogdor's hostname or its IP address. (I can look up its hostname using the IP address with the "host" tool in Terminal, and vice versa.)
So it sounds like a port issue, right? Except I don't think I've ever messed with my port settings directly. How do I diagnose the problem? Should I scan my ports? Can I return port settings to default?
Thanks!
Message was edited by: supercres

Remote Desktop Connection - viewing screen

Hi, I just installed Remote Desktop Connection on my Imac at home so I can access my work PC. Everything works fine but my image I view is only about 5" x 6". It seems like a waste of the 27" screen. Does anyone know how I can increase the size of this so I can access the whole screen?
Thanks

Hi and welcome to Discussions,
personally I use Screen Sharing for accessing my work PC but I think this also applies to RDC.
What you get on your iMac is the screen resolution of your work PC when using RDC.
Since the 27" iMac has such a high resolution natively (2560x1440) the RDC window might be quite small when your work PC uses a resolution of 1280x1024 (as an example).
You might try to raise the resolution of your Work PC (should be possible through RDC when the resolution change on your Work PC is appliable without a restart of it) but eventually might come to a barrier when reaching the highest resolution possible on your Work PC.
Also keep in mind that the higher the resolution of the Work PC is, the more data has to be transfered which might slow down your RDC connection to a crawl.
Regards
Stefan

Ipod Classic Connecting- Blue Screen of Death!!

I downloaded iTunes 8.0 when it came out and ever since I downloaded it, I get the blue screen of death when I connect my ipod in. I am running on vista if that helps, any ideas on what to do?

Hey Patriotbball5460,
This issue is described here: http://support.apple.com/kb/TS2280
Try uninstalling and reinstalling iTunes as described in the article.
Jason

Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L

Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
Sergiusz

Same issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.

Connecting 3rd Party Monitor to iMac 2.8 Intel Core i7 27"

Hi Hope somone maybe able to answer this question?
I would like to connect my Dell monitor to my iMac as a 2nd screen, it has VGA, HDMI, & DVI ports. What would be the best way, can I simply purchase a mini-display port > DVI or VGA adapter or would I require a Dual Link Adapter?
Thanks in advance
Mike

A mini display port cable to either HDMI, VGA or DVI would be fine. The best way to to purchase is to buy it directly from Apple that way you know you are getting a high quality cable that has been well tested.
BTW, your manual says:
One or two Thunderbolt ports (high-speed data, video, and audio)
Connect Thunderbolt-compatible devices for high-speed data transfer, or connectan external display that uses Mini DisplayPort. You can purchase adapters to connectdisplays that use DVI, HDMI, or VGA. The 21.5-inch iMac has one Thunderbolt portand 27-inch iMacs have two.

On Equium A100-337 WLAN connection security screen is not displayed correctly

My computer use to connect to a specific wireless network without any problems automatically. However, now when trying to connect to the same network, the security key screen I am presented with is not the correct type. Instead of two lines of encryption there is only one. When I enter the correct password I get a message to say I am connected to the network but cannot access the Internet. The wireless router is working fine.
Do I need to reset something on my computer or change a setting?

Hi
May I ask what wireless configuration tool do you use???
Did you try to refresh or to reconfigure the WLan profile on the router and on the notebook?
Try this. Disable the encryption on router and try to connect without the security settings. If it will work you can set the encryption settings back.
You could also try to reinstall the WLan driver.
By the way; did you use any firewalls??? Sometimes enabled firewall could has a bad influence on the WLan or internet connectivity.

Connecting 3rd screen

Similar Messages

Maybe you are looking for