Connecting 4.1 (4400) to TV/DVD player

Hi all,
I have got Sony TV and Sony DVPNS50P dvd player.
Can I connect creative 4.1 (4400) to these directly.
Please advise...
thanks...

No, it won't be true surround sound, a 2-channel output will only deliver 2-channel sound. For true surround sound, on that DVD player, you'll need 5.1 speakers that you can connect to the optical or coaxial digital output (so a 5.1 speakerset with a decoder, like the Inspire GD580).
You could use 2.1 speakers, it would give you the same effect as the 4.1 4400 speakers, there wouldn't be much difference.
Cat

Similar Messages

Problem connecting wifi to LG BD670 wifi dvd player?

I cannot connect the LG BD670 3D wifi dvd player to my Airport Extreme. I have a strong signal. But when I input my password, I get this message:
I have contaced LE support and tried everything they suggested. They say: “Access Point Connection failed. Do want to retry?”
I see, can't say is a problem with the wireless card in the player since it does detect the name of your router, the error Access pointconnection failed refer to router, we are not getting access to it
They also said to lower my network security from WPA2 to WAP. WPA2 was to high a security. Does it matter?
Does anyone have a suggest?

I cannot connect the LG BD670 3D wifi dvd player to my Airport Extreme. I have a strong signal. But when I input my password, I get this message:
I have contaced LE support and tried everything they suggested. They say: “Access Point Connection failed. Do want to retry?”
I see, can't say is a problem with the wireless card in the player since it does detect the name of your router, the error Access pointconnection failed refer to router, we are not getting access to it
They also said to lower my network security from WPA2 to WAP. WPA2 was to high a security. Does it matter?
Does anyone have a suggest?

Creative 5200 inspire 5.1 speakers connection to my onida 5.1 dvd player

Hey guys i have a onida 5.1 channel dvd player and a set of creative 5200 inspire 5.1 speaker set.
As per your instuctions shown on the site i bought 3 pcs of single stereo to dual rca cables and attached it to the 5.1 output as per your picture shown but only 2 spkrs and the woffer worked .
Then i connected the front left n right as per your instuctions and the rear left & right i connected to the regular audio red and white plug on the dvd player where you would have connected it to your tv and then at least 4 spkrs and the wooffer is working now i wanted to know how should i make the centre speaker work pls advice
would request you to pls send me a reply on my mail id if you dnt mind ie: [email protected] as i dont visit this site very often pls request you for the same
hope you could help me wit the same pls thanx

i have bought a creative sound card namely " creative live 24 bit 7.1 " will me creative 5200 spkrs work {all 5 FL,FR,RL,RR & CENTRE}
pls advice as i could change my sound card if it isnt compatible.
thnx

How to connect DVD player to FIOS TV (with standard TV)

The Verizon techs installed my FIOS system. I already have the router, DVR and standard TV connected and working. How do I add a DVD player to the mix?
I found wiring diagrams for my FIOS DVR, but they do not include my configuration. Here is what I found:
http://www22.verizon.com/ResidentialHelp/FiOSTV/Receivers/Wiring+Diagrams/Motorola+7232+HD+DVR/12763...
The above diagram includes an A/V receiver, which I don't think my configuration includes. The tutorial does not offer a choice of configuration that is just the DVR, standard TV, and DVD player.
Where do I find a wiring diagram that connects my DVR, standard TV and DVD player? Do I have to do anything to the router when I connect the DVD player? Sometimes I see references to set top boxes--are they the same thing as the DVR?
Thanks in advance.
Solved!
Go to Solution.

Sorry to hear about you trouble.
If you are using a standard TV you need to check the back ports for RCA connections. They are listed as video/audio inputs, with color coding.
From your DVD player use RCA output jacks, yellow for video, red and white for audio
Take other end of RCA cables and connect to TV inputs at the back
Set your TV to what ever input was used for DVD player and this should allow you to see DVD from TV.
I sent you a PM if further assistance was needed.
Jerrold_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Connecting Creative Inspire 5.1 speakers to DVD player

Hi,
I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
Plz reply back to [email protected]
Thanks,Sambath

Creative offers many speaker systems that will fit your needs, without decoder.
You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

How to connect the I-Trigue 5600 to a DVD player???

I got a set of I-Trigue 5600 and thinking of connecting all 5 speakers and woofer to the back of DVD player to get the surround effect when watching DVD. The problem is I can just plug all 5 speakers to the back of the DVD player but how can I connect the sub-woofer to the DVD player as there is no cable to connect them together? Is there some sort of cable or adapter I can buy to connect them together? Thx in advance for any help!!!

have you tried that setup already?
my guess is that the subfrequencies are still combined with the front channels, and if I correct, your speakersystem will redirect them to the sub. just give it a try.
regards

Inspire 5200 - connecting to DVD player?

Is there any way to connect this speaker system to a DVD player? Since the subwoofer doesn't have rca input jacks.

sanafabich,
If you DVD player have 5.1 channel RCA input jack, you could always get yourself some 3.5mm stereo minijack to dual RCA cable for the connection.
Jason

M4500 anable to connect with DVD player

Hi,
Kindly help me I am not able to connect my Creative M4500 speakers with DVD player.
Regards

Not sure what your asking as it should be very simple, you are talking about the X-fi front bay unit right? You have a DVD player with R&w outs, you simply connect to those and then the same R&W connectors on the bay unit. I believe its treated as Linein2 in the mixer. Should be very simple to figure out

Inspire A500: Is there any adapter for the TV or DVD Player?

I have recently bought the Inspire A500 and wanted to know if there was any possible way of connecting it to my TV or DVD Player?

The photo looks like one of the older MagSafe adapters, not the 't'-shape that shipped with 2011 models. I would imagine that if you took it into an Apple Store they would just tell you that it was damaged. I doubt that they would replace it.
However, I don't work for Apple and, were I in your shoes, I'd take my MBP with the adapter into an Apple Store and kindly ask if the adapter is covered under warranty (if you're still in your warranty period or under AppleCare). If it's not, be prepared to buy a new one.
Good luck,
Clinton

I don't have a CD/DVD player

hello,
I've got a new Ipod shuffle so I have to install the CD before connecting the Ipod but my CD/DVD player does not work out. How can I do? Downloads? (which one precisely?)Something else?
Thank you very much for your help

iPod Software Links:
iTunes Download
Quicktime Download
iPod Updater

How to connect JVC DVd player and video cassette recorder to QIP 7100 and Panasonic TC-32lx44

What cables do I need to connect my DVD/VCR recorder through my QIP 7100 to see on my TV? I would appreciate any assistance with this since I am a novice.
Thanks
Solved!
Go to Solution.

You cannot run ANY signal through a Set top box to a Television. The only input on the boxes that is actually functional is the coaxial cable. The only way your are going to connect your DVD player to the TV is via one of the AV inputs on the Television itself.
Hopefully your Television has at least 2 sets of AV inputs, because you are going to need them. 1 for the VCR and 1 for the DVD player.
Depending upon the TV, VCR and DVD player, the connections possible are:
1). HDMI cable from TV to DVD if the DVD player has HDMI and the TV has a 2nd HDMI input. It is very unlikely your VCR supports HDMI.
2). Component Video (RGB) plus Audio AV cables from audio and component outputs on the DVD player to a set of component and coresponding audio inputs on the Television. It is unlikely that your VCR supports component video.
3). S-VHS cable from DVD player or VCR to S-VHS input on the TV (if there is one), and audio AV cables from the audio outputs on the DVD/VCR player to the corresponding audio input on the TV for the S-VHS cable. If S-VHS is not available, you can use composite video instead. HDMI and Component video will give you the best picture and composite video will give you the lowest quality picture, but depending upon the equipment, your VCR may not have an S-VHS output available.

How to connect apple tv to older tv's through dvd player?

Is there a way to connect the apple tv to an older tv through a dvd player or just to the tv?
thx

No, you have to connect it to the TV. If you don't have an HDTV you would need to find a converter and HDMI is the only thing officially supported on the current model so there's no guarantee it'll work. Some have had success, others haven't

Connecting black macbook to dvd player, then through projector

Hello,
I'm using the composite video adapter to hook the macbook to an auxiliary port on my samsung dvd player, and then using component a/v cables to connect to the projector, and I'm getting no picture/sound. I would hook the macbook straight up to the projector, but I get no sound that way. Am I doing something wrong here? Can this be done?

When trying to hook up straight to the projector, are you hooking the sound to the (headphone) output jack for sound?
The Mac Mini-DVI out is apparently only video but no sound. --> http://manuals.info.apple.com/enUS/MacBook_Mid2007UserGuide.pdf (page 24-25)

Using a DVD player. I want to connect my iPad to a DVD player. Is there a way to connect it to a VGA (need female adapters)

So I want to watch DVDs. I have the DVD player with VGA cables. Is there a way to connect it to the iPad? (the adapter has male connections - I need female) . Will it work?

No way to connect them.

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

Connecting 4.1 (4400) to TV/DVD player

Similar Messages

Maybe you are looking for