Connecting 800 series through a sr520

hi there
i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working fine
i also have a new business edition 3000 and a 800 series router which im looking to connect to the sr 520 for access to the ISP as the 800 series doesn't have a ADSL line on it .i have given the 800 series routers wan interface a static address of 192.168.75.14 wich is from the address range in the sr520s default vlan and excluded the address from the DHCP pool. now from the ccp express on the 800 s i can ping the wan port of the 800 s and the default vlan/gateway of the sr520 and the wan ip of the sr520 but no further also once i try pinging it from the cmd on windows i cant ping any further that the wan interface on the 800 s . i was hoping some one could help me with this as im not to sure where to go next

hi andy
thanks for getting back to me .yes the wan port fe 4 on the 800 is 192.168.75.14 and i have a default route sending the traffic out fe4 the wan port to the next hop address 192.168.75.1 the default address/vlan of the sr520
i have selected the wan port as the outside interface but have not configured nat.
the reason i have used the 800 at all is that the be3000 needs a router that has C.U.B.E (cisco unifyed border element)
and the sr520 doesnt also i only have one broadband line that uses adsl which the 800s doesnt support so i thought it would be easy enough just to directly connect the 800 to the sr520 put in a few static route and that would be it
but like i mentioned before i can ping the wan port of the sr520 from the ios of the 800 even googles dns 8.8.8.8 but get no internet connection and when i ping the wan interface from the sr520 its successful it seems to be from the wan port on the 800 and the 800s default vlan/gateway 10.10.10.1 wich is have some difficulty passing traffic
any ideas would be more that welcome
regards
lee

Similar Messages

Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series routers

Dear all,
Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series router?.It is not a leased line.
Which Router model is best for 40 Mbps DSL Broad band termination ?
Thanks&Regards
Ajay Jose K

Hi ,
Below link provides you all model in 800 series .
http://www.cisco.com/c/en/us/support/routers/800-series-routers/tsd-products-support-series-home.html
For your requirement below model should suffice .
Complete throughput from the router is 51 Mbps .
Cisco C891FW Integrated Services Router
HTH
Sandy

Troubles with 800 series AAA config

hey all,
I have attempted to configure our 800 series router to accept client to router vpns into our network. However the clients just dont connect, no error message either. I am a little lost what to do, any help would be Massively appreciate as ive already tried experts exchange and they cant see anything wrong with it. I have attached the config to this message.
kind regards
Matt
UK

hi
i feel you have posted the main hub site config where your remote locations dials in and establish the ipsec tunnel.
But in your case the hub ip is not static you are getting the ip address from SP in this case how your remote clients will negotiate the isakmp and ipsec policies when they dont have a static peer ip configured in their configuration ?
untill unless you have a static ip configuredi n ur hub site i dont think its possible at all for your remote peers to negotiate the key thigns to establish the ipsec connectivity.
regds

Confusion around PoE module for 800 series

There seems to be a lot of confusion around the PoE module for the Cisco 800 series routers
I'd like to know if the Cisco 887VA and 897VAW routers can have the internal PoE module fitted as an after sale item?
I see reference to 800-IL-PM-4= but searching for that amongst suppliers seems to show an external Power injector that connects to 4 Ethernet ports on the router and then from there you connect the external devices.
What I want to get is the internal daughtercard that adds PoE to the router itself.
Can anyone help me identify the right part please?

You can get the PoE daughter card pre-fitted before the appliance leaves the factory or you can do it yourself as an after-sales item.
800-IL-PM-4 is the daughter card. Read the Q & A below:
Q. Can the PoE be upgraded after ordering?
A. Yes, you can upgrade the PoE on all models except the C892FSP-K9, which does not support PoE at all. For all Cisco 890 Routers, the product ID (PID) for the PoE upgrade is 800-IL-PM-4=. This PID comes with two power supply options: 80 or 125 watts. The older CISCO890 requires the 80-watt option, whereas the newer C890 requires the 125-watt option.
Q. Why do some routers use 80 watts and others 125 watts for PoE?
A. The 80-watt power supply is used in addition to the standard 60-watt power supply, so you will have two power supplies connected to the router. For the newer routers we combined these two power supplies into the one 125-watt power supply (hence we have a 4-pin connector). Both models support the base router as well as 4 ports with standard PoE.

Wireless module on 800 series reboot

I have a wireless problem on the 800 series and with two PCs connected to the wireless router and you're a 40GB file to send by second PC over the wireless module does away is this normal?

You can get the PoE daughter card pre-fitted before the appliance leaves the factory or you can do it yourself as an after-sales item.
800-IL-PM-4 is the daughter card. Read the Q & A below:
Q. Can the PoE be upgraded after ordering?
A. Yes, you can upgrade the PoE on all models except the C892FSP-K9, which does not support PoE at all. For all Cisco 890 Routers, the product ID (PID) for the PoE upgrade is 800-IL-PM-4=. This PID comes with two power supply options: 80 or 125 watts. The older CISCO890 requires the 80-watt option, whereas the newer C890 requires the 125-watt option.
Q. Why do some routers use 80 watts and others 125 watts for PoE?
A. The 80-watt power supply is used in addition to the standard 60-watt power supply, so you will have two power supplies connected to the router. For the newer routers we combined these two power supplies into the one 125-watt power supply (hence we have a 4-pin connector). Both models support the base router as well as 4 ports with standard PoE.

Winpe nic driver for elitenook 800 series

I'm having problems getting the mic driver for the new 800 series (840 & 850) laptops from HP.
I downloaded the pe drivers from the HP website (as well as the win7 ones and some direct from Intel) but even though these get added to the boot.wim files the driver doesn't seem to load and when booted into pe we end up with no network access.
I've tried loading the driver manually through the command prompt when in pe and still don't get anywhere. I've seen posts on the 2012 boards and people seem to have had success, but I think they are able to use the win8 drivers which 2207 won't let
you import......
Any ideas that anyone has will be appreciated!
Matt

Hi guys. I hope this helps you. This is the file you need for the Lenovo M72e. I have successfully deployed this with ConfigMgr 2012 RTM
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to Connect my N79 through Internet on Laptop?

Hi Friends ,
i am facing a problem while connecting my N79 through Internet on my laptop . i am using USB Modem for Internet Connectivity. And i want to share this Internet on my N79 through Wireless LAN . i am using Windows Vista . Please tell me how to Configure my WLAN on my laptop . so that i can use it to browse through my N79.
Please Help Me Guys .....................!!!!!!

Yes, it can be done.
1) Enable "Internet Connection Sharing" on the laptop and share the connection that refers to your USB modem.
2) Ask your ISP what the IP addresses of their nameservers are and make a note of them.
3) Configure the laptop's wireless adapter in ad-hoc mode and assign it a static address on the wireless network.
4) Configure the N79 in ad-hoc mode as well, and give it a static address on the wireless network. Enter manual settings telling it to use the IP address of the laptop as its default gateway and to use the IP addresses given to you by your ISP as its nameservers.
With this, you can use the laptop as your phone's portal to the Internet, but only with your phone. This will only work with one device at a time. If you want to use more than one device at the same time you're better off buying a real wireless router to which you will be able to connect your laptop, your phone and any other wifi-aware device you might have.
NB: I don't use Windows on my machines and therefore can't give any specific information about doing this. The advanced settings needed for the phone will be described in the manual.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I started to do that then it said that this will become their apple I.D or similar and then I thought that will disconnect them from the same iTunes? I want them still on my iTunes as they are only young (8 and 10)? Or have I got this all wrong and even if I do set them up with a different e-mail will they still be on my itunes? For example if they want to purchase an App will it still go through my account even if they use their ipod?

I've connected my device through a wifi network and i accidentally signed out my apple ID for imessage then when I signed back in i cant seem to get connected though my wifi connection is working just fine. can anybody help me?

I've connected my device through a wifi network and i accidentally signed out my apple ID for imessage then when I signed back in i cant seem to get connected though my wifi connection is working just fine. can anybody help me?

I am having the same problem with my ipod nano
I have been trying since Xmas

Can't connect to Facebook through WiFi - Lumina 92...

Both my teenagers have just had upgrades to Nokia Lumina's at the weekend, from an HTC and a Huawei. Both phones are WM8 and both have the Amber update pre-installed.
Unfortunately neither phone can connect with Facebook through the Wi-Fi but CAN connect through 3G. As both tariffs are on low monthly data usage, you can begin to imagine the annoyance they are displaying at having to switch off Wi-Fi just to make Facebook sync.
Everything else works fine and I have trawled through numerous web pages and tried everything imaginable to get this to work, but no luck.
If anybody else has had similar problems across their Wi-Fi, please can you share the solution and help restore some peace back to our household.
Alas, both the previous WM8 phones worked flawlessly and my ancient HTC HD7 also works without a blip.

Hi Squirrel23,
Welcome to the Nokia forum.
Are you using a Facebook app or you've setup your account via E-mail+accounts? Is this happening to just one specific Wi-Fi connection? Have you tried to connect to other Wi-Fi? Have you tried rebooting your phone? ^AR

Can't connect to PPPoE through Linksys anymore....

I've been running my Earthlink DSL through a router for 9 months without any problems. (Model: Linksys WRT54G v3.1)
But yesterday it seemed to just not work anymore.
When I connect the ethernet directly to my Netopia modem from my G4 MDD Powermac, I can connect easily with the 'automatic' settings.
HOWEVER... no matter how many different settings I try, I can't get the connection to work through the Linksys router. I keep getting the message 'Could not find PPPoE server'. The Network Settings says the ethernet is set up and trying to connect, but it can't seem to.
I've tried unplugging, pushing in the reset buttons and all sorts of other things, but nothing works.
I contacted Linksys and they claim you can reload the router firmware with a Mac. But after downloading their firmware update, I found it can't be opened by my Mac.
But I'm wondering if the firmware is even the problem?
Any clues much appreciated....

That sounds like the exceptional tech support experience.
Frankly I'm shocked at how bad the earthlink tech support experience was. In the past it wasn't that bad. It used to be a 3 minute wait and then someone halfway knowledgeable would be there.
This time I waited through 4 minutes of brainless telephone ads until they put me through to the Phillipines to Moron #1 who started off asking in an almost impossilbe to understand accent "What eees your father's middle name?" and then "What ees your credit card number?"
I explained to him that he was supposed to as for the mother's maiden name and that I would NEVER give him my credit card number. And then... after another 3 minutes of telephone ads I got connected to another identical 3rd world slave labor tech person who simply asked me all the same questions over again
Needless to say, the experience was a sad reflection of corporate strategy... thinking this is going to get them customers.
Rant over... thank gosh for the Apple discussion boards!

I wanted to know whether i can diffuse music to the bluetooth only speakers from a airport extreme-connected hard drive through my mac?

I'm interested in the new soundlink mini Bose wireless speakers that function only via bluetooth. I wanted to diffuse music to them from an airport extreme connected hard drive through my macbook air. I don't want to stoc music on my mac given the limited flash drive and don't want to go though wires again. Is that possible? Also I can't go with airport express since those speakers don't have the airplay function.
Thanks a lot for your help or ideas

Hello jeri004,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Best of luck,
Mario

How do you access files from an external harddrive connected to TC through USB from iPad or windows computer?

How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?

Filebrowser for the iPad does this very well.
FileBrowser - Access files on remote computers for iPhone, iPod ...
Cannot help on Windows, but another PC guy might be able to answer. Some possible clues here:
http://support.apple.com/kb/HT1331

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Macbook pro connects to iphone through bluetooth but can't access the internet

Hello, I have a macbook pro 10.6 and an iphone 3gs 4.3.3. I used to be able to connect the macbook to the iphone through bluetooth using personal hotspot and access the internet but one day it just stopped working. I have tried turning them off and on, disconnecting bluetooth etc but nothing has worked so far. I have tried connecting my iphone to my ipad2 through bluetooth, it works great. The iphone to the macbook through usb and it works great as well. I have tried connecting another iphone to my macbook through bluetooth and it doesn't work. The bluetooth on my macbook seems to be the problem
Well, to be more precise, the macbook sees the iphones, connects to them through bluetooth, the blue bar appears on the iphones screens but the computer wont access the internet.
Any idea?
Thank you very much.

SUCCESS!!!!!
I visited my brother-in-law yesterday and attempted to connect with his secure network. By sheer luck, he is using the exact same model LinkSys router. My iPhone connected first time--so the iPhone was eliminated as a source of the problem.
I didn't do a lot of troubleshooting at his house, but I did notice that his network was set for both dynamic DHCP and dynamic DNS. I know that either or both of Windstream (my ISP) and my broadband modem requires a pair of static DNS addresses.
Sure enough, delving real deep into Windstream's support site, I discovered a LinkSys router DNS help page, specifying how to set static DNS addresses in LinkSys routers. I then accessed my router, enterd the known static addresses, saved the router settings, then rebooted the iPhone and connected to the network.
SUCCESS!!!
Thanks to Jane, who suggested it was an ISP issue, Jason, and all at Apple support. dumonj, I'll email you directly. Try this suggestion and see if it helps.

Connecting 800 series through a sr520

Similar Messages

Maybe you are looking for