Connecting a Buffalo Linkstation Live to an AE network

I just bought a Buffalo Linkstation Live HS500GL on closeout at Circuit city. I have it hooked up to my AE via ethernet, but I can't "see" it on the network. The supplied software, the NAS Navigator seems to find it, and shows the IP address, and all the information, but I can't connect to it through a browser (Safari or Firefox) or any other way.
The instructions that came with it said I would have a NAS Navigator icon on my desktop as well as a new "share" icon on my desktop. There is no share icon showing up.
I have also tried connecting to server in the Finder "Go" menu, but this doesn't work either.
Any advice out there?

Just bumping up to see if anyone has any ideas.

Similar Messages

  • Buffalo LinkStation Live and NasNavigator 2 problems with Mac

    I am using a Buffalo LinkStation Live (LS-CH1.0TL) with my MacBook. With the Firewell turned off on my Mac it works really well. Unfortunately, with the Firewall on, a perpetual dialogue box appears asking to give permission to allow incoming connections from NasNavigator 2. Whether you click Allow or Deny, the message appears again after about 10 seconds. This process continues indefinitely. It works fine with Windows 7 (either run via Mac or on my previous PC). I have updated all software/firmware and reformatted and restored factory settings on the LinkStation.
    Buffalo are stating that this is an Apple issue so can anyone help or is this going to be technical-support-tennis where each are blaming the other?! Your help would be greatly appreciated!
    Thanks in advance for your help!

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • How do I set up a share on my buffalo Linkstation Live 2 TB

    Can anyone please help me?
    How do I set up a share with my Buffalo Linkstation live so that I can use it for my iTunes library?

    download the setup guide from here and follow the instructions.

  • Will the Buffalo LinkStation Live work with my Mac Book?

    I am wanting to get a hard drive that will wirelessly back up my two MacBooks using Time Machine Software. Also, I would like to be able to hook up my printer to this device so that we can share a printer between the two Macbooks wirelessly.
    I came across the "Buffalo LinkStation Live™ - LS-CHL". It seems to do exactly what I want, but I can not tell if it is compatible with Time Machine software or if I have to use their bundled software.
    Basically, I want to share a backup HD and printer between my two MacBooks....wirelessly. I do not need a router because I already have one. I understand a Time Capsule would probably work, but it is more than I want to spend.
    Here is a link to the LinkStation Live™ - LS-CHL.
    http://www.buffalotech.com/products/network-storage/linkstation/linkstation-live -ls-chl/
    THANK YOU!

    I'm not sure about the 2007 mini, but a quick check is to open your system preferences and look for Bluetooth preferences.  If there aren't any, then no magic mouse for you...

  • Using Buffalo LinkStation Live as an iPhoto '09 Library

    I just recently purchased the buffalo linkstation live NAS. It is compatible with both Windows and Mac. I was wondering if it is possible to use the hard drive as a server with my iPhoto library on it, so other DNLA devices can view the videos and pictures in it. I heard that there are potential risks if the hard drive(s) is not Mac OS Extended (Journaled) formatted. However, this hard drive is for both Windows and Mac so I really hope I can use it as a server. I'm only going to use my iMac to add, edit the library with photos/videos, not use other computers. Otherwise, I can only use my hard drive as an iTunes server, which is kind of a waste, since the hard drive has 1tb and I want to use the most of it.
    Thanks,
    -Tarun

    Then it's not a suitable location for the iPhoto Library.
    One possible workaround: put the library on a Disk Image and store the Image on the NAS
    Regards
    TD

  • Thinking of moving my iTunes library to a NAS (Buffalo Linkstation Live)...

    Hi
    My iTunes library is growing, with movies and tunes etc its getting too big for my iMac HDD (320Gb). At the moment I have all my music on my iMac HDD iTunes library, and my movies on my NAS.
    However I was wondering if I can put my whole iTunes library on my NAS. I have a Buffalo Linkstation Live which says in documentation
    "iTunes automatically makes the LinkStation available as a content source in your iTunes software"
    Not exactly sure what this means though? Also if it is possible, what is it like performance/managing wise? The Linkstation is wired Ethernet to my iMac by the way. Also if the iTunes library is on my NAS, can my PS3 access it to? I have a PS3 which accesses my NAS fine at moment, will the PS3 be able to "see" inside the iTunes library on the NAS?
    cheers

    Anyone in similar situation or has a Buffalo NAS Live please?
    cheers

  • Buffalo Linkstation live - Itunes 10.5

    Hi,
    I have a linkstation live connected to my home router via ethernet.
    The linkstation live has an Itunes server built in to this.
    Prior to upgraded to Itunes 10.5.0.142 my computer (Windows7 32bit) could see my linkstation live as an itunes server as displayed this in itunes as a shared library.
    Now I've upgraded to 10.5.0142 (Had to to upgraded to iOS5) the linkstation is no longer seen.
    I've looked on buffalo's site for an update however they have firmly laid the problem at apples door.
    http://www.buffalo-technology.com/knowledgebase/users/kb.php?id=10272
    Please Apple - Can you re-issue a fix like you did before !
    Thanks
    Paul

    I was looking for something like this. I have just bought a WD My Book World NAS drive. I connected it to my old router (G) and discovered it was too slow to wirelessly stream high bitrate music or movies. I then bought a Belkin N+ router which resolved this issue. However I have trouble with the mounts. When I wake my MacBook from sleep I can normally see the drive under Shares in Finder, but after some minutes it disappears. If I Go -> Network in Finder it turns up, but will not connect. The funny thing is I can be streaming music from the darn thing without interruption! The network shares on the desktop also turns on/off erratically. I can still access the folder contents from these even that the drive is not visible in Finder.
    The NAS is set up for AFP on all shares which should be ok. I have tried both dynamic and fixed IP address on the NAS, but my Mac gets it dynamically. I'll try a fixed IP for this.
    People are talking about automatic mount of network resources on start up. I came from Windblows and do not know all the fancy Unix commands and config files stuff. So how do you folks do this?
    Will be much appreciated, thanks!

  • Problem connecting to Buffalo Linkstation Pro

    Hi all, im still looking for a solution to this problem...
    I have 2 macs that use airport express for network / internet etc. The Airport express is connected to my router to get to the internet connection. I also have a PC that is wired to the router. All works great, until I got a Buffalo Linkstation Pro Network HardDrive. I have set up the buffalo by plugging it in to the router and config it on the same IP range and its set up for mac and PC, it can be seen and used via my PC both by using the ip address through explorer to see the config page and as an extra hard drive, but the macs just cant see it.
    The only thing I do know is that the buffalo does show up on the macs if I turn off airport and hardwire the mac to the router.
    Any ideas anyone, i dont really want to hardwire my macs again just to use this hard drive.
    Thanks
    Lee

    Not sure why its working now, just one of those great technical things. All I have done is unplugged and moved the drive, used a longer CAT5 cable, and plugged it in to a different port on the router.... and now I can see it on the mac!!! how does that happen.

  • 'Phantom'  iTunes tracks on Buffalo Linkstation Live shared drive

    I have finally copied all my music over to a Buffalo Linkstation - I could not consolidate so dragged into iTunes from my PC drive and changed directory location. My PC can see the entire library direct and my iMac and PC can see the library on the Buffalo drive. But when searching direct to Linkstation via PC or iMac I am seeing multiple copies of tracks. Some of these multiples come up with '!' others show up 2 or 3 times and can be played. There are no duplicate copies on the LinkStation - the trash is empty. Any ideas please?

    download the setup guide from here and follow the instructions.

  • AppleTV compatible with Buffalo Linkstation Live?

    If you look it up, The LinkStation Live supports SMB and has a built in iTunes7 server.
    http://www.buffalotech.com/products/network-storage/linkstation/linkstation-live /
    Do you think I could plug this directly into the AppleTV via ethernet or would I have to use my existing router?
    Would it show up in AppleTV sources, as a shared library, if the LinkStation was set up that way?

    Then it's not a suitable location for the iPhoto Library.
    One possible workaround: put the library on a Disk Image and store the Image on the NAS
    Regards
    TD

  • Can't get Apple Tv to see my Buffalo Linkstation Live, please help

    Have tried everything to get the two to talk, but the apple tv does not see the buffalo drive.  I have turned on the itunes server on the buffalo drive, and have verified that all folders are sharded on the drive.  I am at a loss, and would really welcome some help.  Thanks.

    A 3rd gen Apple TV needs an iTunes library shared using Home Sharing, which means a Mac or PC based iTunes will only work.

  • Setting up iTunes and Buffalo Linkstation Live

    Anyone using this setup on Windows XP?
    Anyone know if I can connect directly to my iTunes content from my Apple TV? I have the pCast/DNLA server running.
    Thanks!

    I think I'm having a similar problem. AirTunes has been working fine for the last 6 months, but a reboot last week has killed it. iTunes can see and connect to my remote speakers. When I hit play, the play-button responds correctly, turning into a pause button. However, nothing comes out of the APX out and the timeline doesn't move. I can play out of my local speakers fine.
    At first I suspected that I might have disable a Windows service that was necessary for iTunes to play over the remote speakers. After a fresh install of WinXPPro and updates of APX firmware and iTunes, my symptoms are still the same.
    Funny thing is that everything works fine with my WinXPPro Dell notebook. That makes me think that there is nothing wrong with the APX. Any clues?

  • Anyone help setup TC with Buffalo Linkstation NAS

    I have a TIme Capsule working great with my iMac. I also have a Buffalo Linkstation Live 1Tb NAS.
    There is a smartphone app that allows you to share a folder from your NAS over WiFi and 3G. I want to do this so I can share my music over my 3G when out and about, and play it (I am in UK and have unlimited 3G internet).
    However in the easywebaccess setting it says I havent got UPnP. I'm unsure how to enale/set this in my TC. I goto advanced setting on my NAS and says I need to setup oorts etc, I dont know how to do this on a TC.
    When trying advanced setup I get this error "UPnP Gateway not found and/or doesn't support port forwarding, use manual setup."
    Anyone help please?
    cheers

    Let me suggest you swap your system or your thinking..
    If you use a modem router to which the TC is connected tell me more.. The TC can be bridged and the other device become the router.. this makes things easier as you can then track ports that upnp opens.. and see what you need to do.
    I am unsure where the app is loaded.. is it in the buffalo or the phone??
    Mostly iphone is rigged to itunes, welded or melded would be better as it is almost impossible to escape itunes.. so when you coyly refer to smartphone.. I presume you are not actually talking about iphone but the that horrible company that had the gall to encroach on Apple's space.
    To get music to work, it must use a standard method eg http, or ftp etc.. all you need to do is to tell me what method it uses if you don't have the actual ports it uses.
    Apple buiild everything to operate in their own paid for realm of itunes.. icloud etc. When you try to bypass that.. you need to get the apple router out of the way.
    (It might also be much easier to use an SD-Card or some other memory type if you can plug those in).

  • Buffalo Linkstation not connecting to SLM2024

    I have recently installed an SLM2024 Gigabit switch. We have a mixture of devices on the switch, desktops, servers, printers, wireless access points and all are working ok. We also have four Buffalo Linkstations with Gigabit Ethernet. Each linkstation has a DHCP reservation but when connected to the SLM2024 the ip address is not issued and the linkstation is not accessible as the default ip address is used by the devices. When the linkstations are connected to a Netgear switch they work as expected. The SLM2024 was purchased to replace the Netgear as it only has 2 gigabit ports.
    I have not made any changes to the SLM2024 configuration. Any ideas?

    Hi Richard,
    The Buffalo manual suggests for the linkstation;
    If the LINK/ACT LED on the front of LinkStation is lit, your LinkStation is connected properly.
    If the LINK/ACT LED is not lit, make sure that:
    •  Both LinkStation and the switch or PC are powered on.
    •  The Ethernet Cable is securely fastened to both devices.
    •  The Ethernet Cable is not damaged; verify this by trying another Ethernet Cable.
    If the link light is not properly lit, Buffalo suggest the following, contact;
    Web:   www.buffalotech.com
    E-mail:   [email protected]
    Telephone: (866)-752-6210 (USA & Canada only
    But the manual leaves alot of troubleshooting out,  is the link/act light flashing who knows, port statistics on the switch port will tell you if packets are TX and RX out the switch port to the linkstation.
         1.    It would be interesting to see a screen captures of linkstation's SLM switch port statistics.
    (This will tell me if the switch port is receiving and sending traffic in and out of the switch port)
          2.  It would be interesting to see a screen capture of the linkststation's  SLM  port status.
    (This will tell me if the linkstation has negotiated link speed and duplex correctly)
    There is a process mentioned at the  buffalo support page that illustrates how to directly connect a PC to the linkstation.  But I guess if your PC can communicate using the Buffalo easysetup utility, you can  manually configure the IP and Ethernet settings onto the unit.
    Sounds like setting up  a port mirror would be useful to see the DHCP and ethernet interaction to the Linkstation.
    So far there are two things to reply with, port status and port statistics.
           3.  Why not use the SLM to port mirror the linkstation port and capture the DHCP process via a free  tool called wireshark.  
           4.  Please reply with a short wireshark capture ?
    Good luck and seasons greetings,
    regards Dave

  • Connecting My E7 to my Buffalo Linkstation over a ...

    Can anyone please help I've tried using the remote drive option to access my Buffalo Linkstation using the web address http://192.168.1.13:9050/ shown on my pc - I've entered the correct login and password, but all i get is unable to coonect 'Link Station' Not found check settings?

    Open needed port(s) for webdav in your router,
    Perhaps your firewall inside the phone is blocking or you haven´t the right settings in your router.
    Dynamic ipadress? 
    https? 
    Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Maybe you are looking for

  • How can I get my iCloud account under my another apple ID

    I have 2 apple ID, ID A is which I do not want to use again ,ID B will be use always. I got the icloud account binding with ID A , now I want to get the icloud account binding with ID B, and I do not want to sign a new icloud account. What should I d

  • Conditional Formatting for Report Rows based on page item

    Hi, I have a report and a page item on a page. I would like to somehow highlight any report rows where a particular column in the report (e.g. "Customer_ID") matches the page item (e.g. P2_CUSTOMER_ID). Any idea how to do this? Thanks, Forrest

  • Microsoft Outlook for Mac

    I need to use Outlook for work and created an alias email account in iCloud which works perfectly. How can I compose a new email using Outlook as the client, and I need to be able to use my alias account as the sender. It was easy to set up in iPhone

  • I need an API in OTL. could anyone help me?

    hi I need to develop an OTL interface, for transferring employee in & out timings which API i need to use here exactly? tnks gopi.

  • How to install APEX  in R12 Environment

    HI, We have a new requirement that, i have to install APEX In our R12.0.5 environment OS : Oracle Linux, I have no idea how to install in Applications environment, Pleas guide me how to install in R12 environment.