Connecting a canoscan 9000F to my iMac?

I cant connect m Canon Scanner 9000F to my iMac?

I'm having the same issues with my scanner as well. I've tried with two different MBPs one, I tried to install the driver from Canon's website (that says it's compatable with Mountain Lion) to no avail. After trying everything i could to make that computer work (running updates, deleting and readding it from Print & Scan) I connected the second computer to it, didn't install the drivers from Canon, instead went to System Updates and installed the Apple Canon Printer Drivers 2.9 that was immediately available once I connected the scanner (no Canon printer or scanner had ever been connected to that computer before). I ran that update, restarted, connected the scanner, still won't scan. I get the same error messages. Anyone have any ideas?

Similar Messages

My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000. software for this device could not be launched. The drive is not connected or is busy." How do I regain connection?

My Photoshop Elements 11 has suddenly lost contact with my CanoScan 9000F with the following message..."CanoScan 9000. software for this device could not be launched. The drive is not connected or is busy." How do I regain connection?

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Problem with interface between Photoshop and CanoScan 9000f, mark II

I have just upgraded my Mac to OS X 10.9.1, Photoshop to CC, and purchased the CanoScan 9000F, mark II. I had the CanoScan 8600F previously which came 8+ years ago with Elements 4 but now all this is obsolete with the current software and OS. In Photoshop Elements 4 and the old scanner, I could go to the File menu, select "Import" and find the scanner listed, going then directly to the Canon ScanGear interface to use to scan images. This is not currently happening with the new software and scanner. Under the File menu now I now only see "Images from device..." which takes me to another much less useful interface with the scanner. How can I get Photoshop to again connect directly to the ScanGear interface?

How can I get Photoshop to again connect directly to the ScanGear interface?
AFAIK, you cannot.
The direct connection required the less-than-reliable TWAIN plugin to access the manufacturer's scanner driver which was usually 32 bit only. Photoshop CC is going 64 bit only (it's there already on Macs) so Adobe has removed TWAIN from CC entirely.
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
http://forums.adobe.com/thread/1245120
Additionally, when in use, TWAIN requires exclusive access to Photoshop so you cannot do anything else while scanning is occurring.
Adobe recommends scanning outside Photoshop (using a 3rd party utility such as Vuescan http://www.hamrick.com/). You can then scan (with Vuescan) and use Photoshop simultaneously. Then import the scanned image into PS CC.

CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
• Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
• This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
Thanks.
By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

Canoscan 9000F drivers

I have been using OS X 10.8 in the past and happily got my Canon 9000f scanner to work. I have upgraded to OS X 10.9 and now I can only get an error. When I open MP Navigator EX 3.1 it throws up a panel with this message.
Cannot start MP 3.1 check the following ponts
1. The supported of this software is as follows
Canoscan 9000F
Canon MX340 series
Canon MX350 series
Canon MX 380 series
When your product model is not listed instal correspondent (op cit) MP Navigator or MP Navigator EX.
2. MP driver scanner driver which support s your product model is installed.
3. Your product model is connected to the PC properly and the power is o, if there isa power supply.
4. Reconnect the USB cable when connected with USB.
There seems to be no way past this panel.
Any ideas on what i have to do to get this working?
thanks
jon

Try using Image Capture in you Application folder as see > Mac Basics: Using a scanner
Noting that in Mavericks, you may need the ICA Driver Ver 3.1.0 from > Canon Support 9000f DriversAndSoftware to use the scanner with Image Capture.

How do I connect my Xbox 360 to my iMac

I want to use my imac as a TV so i want to know how to connect the xbox 360 to my imac.
Thank you for your support

What iMac model do you have ?
The 2011 ThunderBolt iMacs only work with other ThunderBolt Macs Thunderbolt 10.6 Help: Using another Mac as an external display
For the 2009 and 2010 27" iMacs with Mini DisplayPort you would need something like the Kanex XD http://www.kanexlive.com/xd
The Kanex XD is not compatible with ThunderBolt iMacs.
Stefan

How can I connect my TV sony bravia to Imac for display !

How can I connect my TV sony bravia to Imac for display ! I did it before but a week ago crash my sistem and been to apple store london to fix it and wend I come home I can not reconnect the tv to imac ! please help !!!!!!!!!!!

I BUY A CABLE FROM AMAZON.CO.UK AND MY iMAC WAS WORKING WITH THIS CABLE BUT AFTER THEY (APPLE STORE REGENT STREET ) REPARIT NOW IS NOT RECONICE THE DISPLAY !!!!!

How do I get windows to connect to the internet on my iMac

How do I get Windows 7 Home Premium to connect to my existing internet connection, on my iMac (Lion 10.7.3)? The installation of the Windows 7 using Bootcamp went fine, up to the point of getting connected to the internet. My iMac side of the partition connects to the internet just like it always did.

You should ask this in the boot camp forum.
You will probably get more help there.

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

Why is wireless router connectivity is different with Powerbook than iMac?

I had problems with my 10.2 on the G3 450 iMac (that caused me to go to 10.3 about 2 weeks ago), my trusty old Buffalo router fried its WAN port. I replaced it with a Netgear unit, then a Linksys unit, now I'm back to Buffalo. The ongoing problem is that the laptop has a heck of a time connecting to the internet - while the iMac (via ethernet) has no problems whatsoever. It doess/did this with every manufacturer of routers I tried (since first I thought it may be a Netgear incompatibility issue).
Strange part about the problems: Only initially does it spend 20+ seconds (close to Safari/Firefox timeout) "looking for" the host. Once it has found it, if you click on any links within the same host, it's lightning-fast. Just the initial callup seems to be inordinately difficult. I was hoping new firmware for the wireless modem, 10.4, the latest Airport update etc would alleviate the situation - no such luck. It USED to work fine on the old wireless router ... Also, it does this "looking for" business whether I have security enabled or not (I usually run 128bit encoding).
I don't really mind waiting for a few seconds for a site to load, but when you're talking about something like Yahoo or ESPN, all these independent advertising servers have to be contacted to load the page and - you guessed it - it's a 20+ second delay for each one...
I've rebooted the router and the laptop many times; I doubt it's the cable modem as the Ethernet on the iMac comes from the same router an doesn't have a problem at all. Any chance it's a setting of some sort in the preferneces panels?
The problem appeared initially with the Netgear router. The whole reason I went back to Buffalo is that I never had any issues in the 4 years I owned the previous one (until the WAN port went out). I also tried a Linksys router but admittedly didn't spend a lot of time with it as the delay problem appeared right from the start.
As far as 3rd party hardware is concerned, I wouldn't mind just getting an Apple Airport station at this time, but really don't want to spend the $ if it's an issue with either the laptop or its Airport card. I guess I could get one here at the local Apple store and bring it back if it doesn't work any differently (at least then I'd know it's either a laptop or a Comcast Cable-issue...).
System setup:
Desktop: G3 "Graphite" iMac / slot-loading / 400Mhz / 640MB RAM / 10.3.9
Laptop: 15" G4 Aluninium Powerbook / 1.25Ghz / 1GB RAM / 10.4.6
Wireless: Buffalo AirStation Turbo G WHR-HP-G54 (wireless to laptop / ethernet to iMac).
Powerbook 15/1.25GHz/1GBRAM Mac OS X (10.4.6)

It sounds as though you're having a problem with DNS lookups. Try this, type into Terminal (Applications > Utilities)…
sudo lookupd -flushcache
It will subsequently ask you for your administrator password. Type it in and then wait for the prompt to return. Do not do anything before then. Now, restart and see if things are any better.

Not able to use Canoscan 9000f Mark II with Photoshop CS6

I have bought a new Canoscan 9000f Mark II, I have installede all software that came with the scanner. But my Photoshop CS6 can't see the scanner.
Can anybody help me?
Henning Karlby, Denmark

You downloaded the twain plugin referenced here and put it in the 32 bit version photoshop cs6?
(twain from photoshop doesn't work on the 64 bit version of photoshop cs6)
http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html
The Twain_32.8BA should go in:
C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Plug-ins

I have connected the adapter and cable from imac to GVA HD tv but nothing seems to be happening.

I have connected the adapter and cable from imac to GVA HD tv but nothing seems to be happening. Any suggestions?

Was that message showing a s dialog when selecting the tv connection as a sound output device? I ask because I don't know the exact context of that message and never heard of it before.
It may be helpful to take a screen shot of both that message and also the list of the sound output devices while the tv is connected.
You never specified your model (year) of your imac so I don't know its limitations. Maybe some version doesn't support sound through the mini-displayport (hard to believe any model wouldn't with mini-displayport). But if that is the case you may have to resort to analog stereo from you stereo line out output jack to your tv.
One final thing. The mini-displayport adapter you have may not support audio. That was a possibility a few years ago. That is why most places that sells these things also explicity specify whether the adapter supports audio. For example, monoprice's adapter:
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
or even the Moshi adapter sold through the apple store.
Moshi Mini DP to HDMI Adapter with Audio Support
Note both these adapters explictily say they have audio support.

Trying to connect my iPhone6 with my old iMac with 10.6.8 MacOS. It says I need a new version of iTunes. When I try to upgrade the iTunes (11.3.1), it says, it is already the latest version. What do I do now?

Trying to connect my iPhone6 to my old iMac with 10.6.8 MacOS, and synch up the music. It says I need a new version of iTunes. When I try to upgrade the iTunes on my iMac, it says, it is already the latest version. What do I do now?

The current version of iTunes is 12.x.x and requires OS X later than Snow Leopard.

How to connect xbox 360 to the newest iMac 21'5?

How to connect xbox 360 to the newest iMac 21'5?

So if I connect my Xbox thru adapter like that one ( http://store.apple.com/us/product/H3983ZM/A ). It will work?

Connect a macbook air on an iMac

Hello, I am looking to connect a macbook air on an iMac to work on a bigger screen?
Thank you in advance

This document should help.
http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html

Connecting a canoscan 9000F to my iMac?

Similar Messages

Maybe you are looking for