Connecting a Different Speaker to the S750

My computer decided to create an error that shot a high pitched garble throughout my speaker system. Needless to say thankfully it seems it only ruined one speaker the center channel.
The center channel only produces sound from its midrange woofer now. If there is a fix for that i'd love to hear it.
For now i have an old sony center speaker to replace it with. Just curious if its ok to connect a different speaker to the s750. Its power rating its around 70watts rms.
Message Edited by SkyG on 11-26-2007 12:03 PM

Any 8 ohms speaker will work! Or you could just get the MC100.
http://www.cambridgesoundworks.com/s...d&item=cmc0zzz
Message Edited by evo9 on 11-27-2007 10:27 AM

Similar Messages

How to do a forget Bluetooth devices previously connected to srs btx300 on the speaker?

I have previously connected 2 different laptops to the speaker. Now some time when the laptops are switch on, the sound are transmitted to the speaker. If they are not connected, the blue light keep blinking even though no device is connected.
How do I make the speaker forget the old connection? I tried doing reset but it does not work.
Thanks.

"A hard or forced reset erases all information in the computer's memory which may restore functionality" Before I try this, I need to be clear about what is erased with a hard or forced reset - Is it "all information in the computer's memory" or only the information in the computer's memory that is involved in restoring functionality?

How to Check when the user is connected to different desktop.

How to Check when the user is connected to different desktop.Sometimes the user maynot see the theme in the personalize theme list. In that case the person must be using different kind of desktop.How to check, I need a path.And how to apply the theme to that user?
Thanks,
Paturi

Hi,
you can create the new portal desktop from
System Administration => Portal display => Desktop and Display Themes
Select your folder from Portal Content and from its context create new Desktop.
Add The Framework page and the theme to this desktop page.
Go to your folder from Portal Content and from the context of the framework page select add framework page to portal desktop.
Adding Theme to desktop
From Portal content select Theme folder and select the theme right click it and select Add theme to Portal Desktop.
Create rule for the Desktop.
Navigate to System Administration => Portal Display => Desktop and Display Themes Portal Content => Portal Administrators => Super Administrators =>main_rules.
Click Add IF Expression.
create the expression if user = xyz then click on apply
Select the then clause of the if and navigate to your folder where Desktop is created ,Add it and Click Apply.
Save the Changes to the rule.
Hope it helps you.
(reward points if its helpful)
Thanks,
Gunjan

Need to run the same query on different databases with the same argument

Hi folks,
I've a script: obj, which has simple stuff, when I execute @obj
this asked me for the object_name
and in return gives me object/s if it exists in this (connected) db.
Now to check in 2 other dbs, I've to disconnect from here and then connect to those dbs and run the same @obj there and give the same argument, e.g., EMP and it'll return the answer.
What is desired ... if not very hard on you :-(
Some thing like @objAll
asked only once object_name ... e.g., I gave EMP
now go to all the 3 dbs and give me the result in ONE spool file only.
What do you think, is this tough, I did something, but it was not involved connecting to different dbs, within the same script, but here we cannot create db links and have to disconnect and connect to the db to get some information.
Please do reply, if my question is not understandable or any ...
Thanks in advance.
Best regards.
Edited by: user8604530 on Jun 27, 2012 1:51 PM

As far as i understand from your question : you cannot create db links ? right..
well another option is to create a shell script , something like this :
vi check.sh
export ORACLE_SID=db1
sqlplus / as sysdba <<EOF
select query comes here;
exit;
EOF
export ORACLE_SID=db2
sqlplus / as sysdba <<EOF
select query comes here;
exit;
EOFchmod 777 check.sh
This does the job for you.. I am unsure how to pass the parameters in sql while running through a sheel script.. but if thats possible you will be able to achieve what you want.
Regards
Kk
Edited by: Kk on Jun 27, 2012 2:44 PM

A solution to the S750 speaker system problem

Well my s750 died just like everybody elses. But after creative wanted me to pay 75% of my purchase price, I found a better solution. Nope, I am not fixing the unit like you guy's. I do not see the need to fix a poorly design system! I am not sure if creative or indigo/bash/blade audio is to be blamed. But if I had to pick, I would say "indigo/bash/blade audio". Years ago before blade audio became indigo, I had a chance to visit their location in ontario Canada. This was just when they stop making the blade audio car amps.
While I was there, I happened to see this long list of brand names they had started to make amp modules for. Names like Harman International, Klipsch and so on. Anyway I cast the blame on indigo for this reason: Some years ago I had purchased a set of "harman international" infinity IL series speakers. Like our creative s750, the infinity shares a bash powered subwoofer system. And just like the s750 the infinity subwoofer like to blow up too! In the case of the infinity, the power supply was the weak link. The amp module in the infinity at that time, was built just like the blade audio car amps before. Which in my opinion is a much better design than what is being used in the s750. I remember one of the sale guy at circuit city at the time saying, "I wish we would drop this model". He went on to tell me the failure on the powered units were very high. You know there is a problem when the mid level Creative Inspire T7700 7.1, out last the flagship s750. Now, whats my better solution you guy's want to know? Two words , Simplifi Digital! The 7075a 7.1 amplifier along with Definitive Technology Pro Sub1000 and the remaing surround speakers from my s750 system. Yes, it did cost me more to go this route. But what I now have is a much more reliable system. And a sound that the s750 can only dream about. My s750 died while I was listening to Dave Bruebeck quartet "take five" at mid volume. With my current setup, I can listen mid volume all day long with no hiccups.
For those who my have the cash to spend. I recommend looking at my direction!? Keep this in mind, make sure whatever powered subwoofer you choose, is adjustable up to 50hz. The creative surround speakers dont play very well below 20hz. Also make sure whatever powered sub you choose don't use a BASH amplifier. For those looking at the s750 as a purchase, good luck. Or go over to partsexpress.com and get the Dayton Part Number 300-670, surround speakers. Then get the simplifi digital 7075 7.1 amplifier and power subwoofer of your choice and make a better/best system. Sorry Creative Labs! This post is NOT intended to cast negativity. I use and like the products you offer. I just do not like the s750, and the reasons are all over this forum and elsewhere on the net. I currently own 3 audigy 2zs sound cards, three Inspire t7700 speaker system, three sound blasters modems and yes, one defective/dead s750 speaker system. If anything use this post as a positive to what Creative Labs could offer in the future. A system like I now have, sure would be nice with the Creative name all over it.
Victor
Creative Labs end user

My system specs below. What I have now simply blows the S750 away. And this is mated to my Audigy 2zs card. I am tempted to try my Terratec Aueron 7.1 universe which does sound better than my 2zs. The Simlifi Digital amplifier is one serious unit. This amp has one HUGE toroidal transformer inside of it! I was able to see it thru the vents on top of the cover. Definitive Technology ProSub 1000 Subwoofer Specifications:Complement: One 10" woofer with polymer cone coupled to one 10" infrasonic radiator
Amplifier: 300 Watts RMS
Speaker Level High-Pass
Filter: 6 db/octave (80 Hz)
High-Level Low-Pass Filter: 24 db/octave continuously variable (40 Hz ~ 50 Hz) plus unfiltered LFE direct coupled input
Frequency Response: 8 Hz ~ 50 Hz
Simplifi Digital 7075, 7.1 Channel Surround Amplifier
Detailed Specfications
Power Output: 50 W/ch RMS, 8 ohm ( kHz sine wave, all channels). 70 W/ch RMS, 6 ohms ( kHz sine wave, all channels) 75 W/ch RMS, 4 ohm ( kHz sine wave, all channels) 75 W/ch Peak, 8 ohm (music) 100 W/ch Peak, 4 ohm (music)
Frequency Response: 20Hz-20kHz (+/-0.2db over the entire frequency range)
Total Harmonic Distortion: <.03%, 50W RMS, 4/8 ohms, 20Hz-20kHz
Line-level Audio Inputs: V RMS (2.83V P-p) yields full power out into 8 ohms
50k Impedance
8 RCA inputs
Subwoofer output: Pass through (non-buffered)
AC Power: 0-25 VAC at 5A
Dimensions: 7.2"(width) x 3.9"(height) x 7.7"(depth)
Weight: 33 lbs
PRODUCT DESCRIPTION
The perfect audio solution for your Media Center or traditional PC. Use the Simplifi Amplifier with a Media Center PC, and get clear, powerful audio in your living room without needing yet another remote. Connect the Simplifi Amplifier to a traditional PC and hear how good your computer's audio can be.
Features
Class A/B Hybrid Design provides power and audio fidelity
Simple Rear Panel Connections make setup easy
Power Sensing Technology turns amplifier on/off with PC
Volume controlled through PC
Media Center Power Plug
Advanced Spike Protection
Fan cooled

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers

I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.

Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen

Is there a way to connect an external speaker (for another room) through the headphone port

Is there a way to connect an external speaker (for another room) through the headphone port & still hear sound through the internal speakers? System Preferences/Sound/Output or Sound Effects allows you to use one or the other -- headphones or internal speakers. I would like to have the option of hearing music through the internal speakers in one room, & through an external speaker in another room at the same time. I also do not want to frequently disconnect/reconnect the external speaker from/to the headphone port as I know over time the connection could become loose. (10.7.4 Lion)

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Can iPad3 connect to Apple TV via Airplay, and Bluetooth speaker at the same time?

I'm making a best man speech using Keynote at a wedding tomorrow, for which I need audio as well as video. The Apple TV is connected via HDMi to the projector, and I can control the presentation wirelessly from my iPad. So far so good. There is a Bluetooth-enabled speaker which my iPad can connect to via Bluetooth, but then it loses the Airplay connnection to the Apple TV. Is there a work around? I guess if I had an Airplay-enabled speaker and not a Bluetooth enabled one, I'd be OK, but I don't have time to go buy one now.
It appears my only option if I want to use the speaker (which I do), is to use my MacbookPro instead and connect via HDMI straight into the projector and bypass the Apple TV altogether. Which means I'm stuck standing by the macbook pressing SPACE BAR every time I want to change slides, as opposed to using the iPad wirelessly which lets face it would look far cooler!

Pretty sure you can't route the audio via bluetooth and the headphone jack.

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

So I have just had my potentially duff hard drive replaced and uploaded my data from time machine to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. How do I get back to qwerty?

So I have just had my potentially duff 1Tb hard drive replaced by apple and uploaded my data from time machine only to discover that pages is now speaking to me in a different language. The keyboard has been selected as UK during setup. Any idea how I can get back to qwerty?

roxandiv wrote:
pages is now speaking to me in a different language.
What exactly are you referring to? Are the menus or templates for Pages in a different language? Does something strange appear on the screen when you type?
Could you perhaps use the Camera icon here to post a screenshot of what you are seeing?
To make sure you have the right keyboard, go to system preferences/language & text/input sources and make sure that only the box for US or British is checked (and that the box for French or German or anything else is not checked).

FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

Hi,
I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
For example, what I'm trying to do is below:
In grid2.column[A], I have the following formula:
grid1.column[A]
The result is an error.
The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
grid1.column[A] - grid2.column[A]
Any help is much appreciated!
Thanks,
Tiffany

Thanks for the detailed response Mike.
The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
Thanks again for your responses. It's very much appreciated.
Tiffany

When trying to connect to Airplay speakers I get error message "The network connection timed out" although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance from my speaker/ TV the problem?

When trying to connect from iTunes to Airplay speakers I get error message “The network connection timed out” although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance between my PC and the speaker or the AppleTV the problem?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?

Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?

Thanks Gary, I think I should have mentioned that I have wired my other speakers and it works fine.
I just wanted to go wireless when presenting in front of class, simply to avoid trailing wires from the macbook which I position in front of me on a desk next to the projector and the speakers are behind me next to the screen.
I have struggled to find a solution, and reading through other discussions it is a problem that perhaps only Apple can solve.
I hope the new 'Yosemite' will resolve the problem.
Thank you once again for your reply.

After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

After Install IOS 8 and 8.0.2, the Ipad audio was distorted, and the bluetooth connection to audio speaker have wheezing.

I ALSO just updated my brand new iphone 6 to 8.0.2, and I ALSO had my cellular service BRICKED.
All I get on the signal meter is Verizon 1x. Every so often 3G would popup and you could send a text (no calls though) but it's gone in seconds. So I can't send texts or make phone calls.
This phone worked immediately before the update and stopped working immediately after the update.
My neighbor has a iphone 5S. He updated to 8.0.2 lat week and had no problems UNTIL just this morning, when his phone stopped working - no cellular voice or data. He downgraded back to ios 8.0 but his cellular service never came back.
Called verizon - was told there were no service outages and then I got transferred to tech team.
Tech team had do all the Apple troubleshooting steps but nothing more. So they said "take it back."
So this BRAND NEW iPhone 6 phone is BRICKED because of iOS 8.0.2.
Thanks Apple!

Connecting a Different Speaker to the S750

Similar Messages

Maybe you are looking for