Connecting a G4 and an iMac by airport express

I am trying to connect my iMac and my G4 wireless. I cannot use an Airport card on my G4 due to a damaged connector pin on the main board, so I bought an Airport Express Base Station, which I connect to my G4 using the Ethernet port. According to the sales people this should allow me to set up an airport network and connect to my iMac.
Using the Airport Admin Utility, and selecting "Other" as base station, an IP address is provided and the default password recognized, but an error occurs when reading the configuration of the base station.
My iMac does not find the base station either, using Airport.
I have reset the base station to factory defaults without any success,
Any suggestions what I am doing wrong?
Greg

You really need a wireless router with ethernet ports to connect to the cable modem to do what you want to do.
The iMac would continue to connect using ethernet from the router and the G4 could as well if you run an ethernet cable from the router to the G4.
Alternately, if you do not want to run the ethernet cable to connect the G4, you may be able to use your AirPort Express and configure it to "join" the wireless network that the wireless router was creating. If the router is compatible with what Apple calls ProxySTA, you can enable the ethernet port on the Airport Express to furnish an ethernet signal to the G4.
But, you must have an AirPort Express"n" to activate this feature and there is really no way to know in advance if it will work correctly. Several product reviews have mentioned that it should be compatible with virtually any wireless network, but that would be impossible to verify.

Similar Messages

Printing from imac over airport express connected to an ethernet network

Hi, My home ethernet network shares an ethernet connected printer, and web connection via a switch and worked fine. What doesn't now work is my rearrangement that now includes an emac, and imac connected to this wired net via an airport express, they connect to the web just fine, but the printer isn't detected. I can hookup either mac to the switch directly using cat5 cable and detect the printer but not over the airport express that is wired to the switch. If anyone can help it would be greatly appreciated as I am trying to avoid more holes drilled in the floor so near where the plastic waterlines run to the second bathroom.
Thank you,

Hello again,
I'm guessing that the problem is maybe that both the switch and the express are duplicating some of the same things, and that the airport express should maybe be setup as strictly a bridge. Would one be able to set it up as a bridge and be able to handle 2 macs, or would it just handle one correctly at a time?
Thanks

Getting ARD to see an iMac behind Airport Express

I have a client that has bought an iMac and is connected to the internet using Airport Express (adsl modem is connected to express with ethernet cable, and modem is connected to the telephone line, problem is that when I am in my studio and try to connect to my clients iMac (which is in another building) it comes back with 'offline' even though it is not.
I am presuming I have to alter a number of setting before it will let me in, can anyone tell me what, and where they are.
Thanks in advance

Use the Airport Admin Utility and forward ports 3283 and 5900 on the Airport Express to the IP address of the iMac.
12069

Stream from my iMac via airport express to my Harmann Kardon AVR360

I want to stream music from my iMac via airport express to my Harmann Kardon AVR360, but without success. I'm using a mini jack -> optical adapter. Any recommendations on how to make this work?

The issue may be the adapter or cable that you are using. Since both your AirPort Express and Harman Kardon support digital audio optical connections, the simplest connection between them would be to use a cable with a 3.5 mm minijack to TOSlink optical connector on one side and a TOSlink optical connector on the other side.
I also have had scenarios where I had the right cable/connector but either the cable or connector was faulty.

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
a) HP printer with USB port only (no ethernet port) connected to Airport Express
b) No issue printing from Macs
Tests
1) Installed Bonjour 2 - does not find printer (now uninstalled)
2) Bonjour 3 is listed in programs but no way to access
3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
Regards
Richard
p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

This is possible, but not with Bonjour or any other fixes. It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

Can't connect itunes to my remote speakers thru airport express

After having updated the latest itunes 7.3 my itunes does not recognize anymore my remote speakers and does not connect to them.
Have resetted my airport, to no avail. still, itunes does not recognize it.
please advise what to do as it is very annoying, when you make updates that your old configuration stops working.
many thanks
marwan

I had the same problem. It used to work without any problems but then stopped for no apparent reason. I tried resetting and hard-resetting the Airport Express (AX) many times, but no success. Plus the Airport Utility would never show the Airport Express once I configured it to join the exisiting wireless network (in my case a Airport Extreme).
Anyway finally this worked for me:
1) Hard-resetting the AX
2) Start Airport Utility and find the AX. But instead of going throught the guided steps to set it up, double click on the AX symbol and to set it up manually. Yo will see 5 icons in the meny bar - Airport, Internet, Music, Printers, Advanced.
- Airport --> Base Station: In give it any name and password.
- Airport --> Wireless. Wireless Mode: Join a wireless network. Select it below and the appropripate security settings and password.
- Music --> Enable AirTunes. Leave the rest alone.
3) Click Update. Close the window and wait until the AX restarted. (solid green light)
4) Let the AirPort Utility rescan the network.
5) Restart your wireless base station/router (as I said, in my case Airport Extreme. If you have another base station you may have to do it manually)
6) Start iTunes and presto you will see the remote speakers
7) Let AirPort Utility rescan the network. Presto, you see both the AX and the base station.
My setup: MacBook OS 10.4.10, Airport Extreme and Express, HP with WinXP Pro. Can also stream music form iTunes on the HP.

Trying to connect my wired PC to the wireless airport express via the wireless router.

Trying to connect my wired PC to the wireless airport express via the wireless router. TP-link wired/wireless router. Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever. The amber light is blinking. Thanks in advance for the help!

If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
Wired should be easier. Just use a network cable to connect to the router. Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings. If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports. Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb. Join that network and, using the AirPort Utility, configure your AX as a network client. Go to Wireless > Wireless Mode: Join a wireless network.
Select your router wireless network from the drop-down menu, select the appropriate security and type in your password. Click update.
It'll restart and automatically join your network. Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
Let me know if this worked.
Jorge...

How to connect grace digital wifi radio receiver to airport express.

Hi,
I need to connect grace digital wifi radio receiver to airport express. The receiver works fine with belkin n150, however when connected to express as primary base station ( belkin switch off), it displays
"Default gateway.......
Port 80 not found. not connected"
The conneted type is dynamic wifi network (POE + ). The express is set in bridge mode and configured through ipad.

Hi,
Called up the apple support services on Dec 9, 2013 and was on line for almost 1 hour without a solution. However, received a call back from team in Singapore on the same day and commitment to revert on the issue within 24 hrs. Received a call within 24 hrs and the entire discussion came down to the point that I have to manually set the grace digital equipment.
I tried other options and eventually the simplest thing to do was to set the connection option to DHCP only and ignore the error.
Now its working fine..

Why can't i get internet connection on my blu players with my airport express?

why can't i get internet connection on my blu ray players with airport express?

Hello there, sheilafromfra.
The following Knowledge Base offers up some great steps for troubleshooting the Wi-Fi issue on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

If the purchases are all from the same account then you can share the content by authorizing each device.
If you have separate accounts then you have to be authorized to use the content purchased from another account.
MJ

If I run a50 metre Ian cable to my workshop and plug in an Airport express will it create a wi fi signal for my ipad to pick up

If I run a 50 metre LAN line to my workshop and plug in an airport express will I get wifi to my ipad

The max length is 100m http://en.wikipedia.org/wiki/Category_5_cable So it should work.
 Cheers, Tom

Connecting "older" pc and new iMac desktop via Airport extreme

Please bear with me...I am a Mac novice. My husband and I just purchased our first mac (iMac 20" desktop)and had it up and running in 2 minutes. We got internet access immediately through the bluetooth (whose signal it is remains a mystery). We purchased the airport extreme to access the internet via our Dell's 2 y/o cable modem (comcast Motorola Surfboard)before we realized we had a hotspot in our house. We also want to use the printer that is connected to our pc with our mac. I cannot get the airport configured at all...I keep getting error messages. The first one that appears says that my wireless interface is not enabled. I went to My Network Places and set up the wirless network using a USB flash drive. I connected it to the airport's USB connection, and then to my iMac. Neither one appeared in the list of devices detected when I reconnected the flashdrive to my pc. I've tried rebooting, disconnecting and then reconnecting both the modem and the aiport from the power supply. Should I reset the airport? Help!!
iMac 20" desktop Mac OS X (10.4.8)

We got internet access immediately through the bluetooth
(whose signal it is remains a mystery).
This is very likely to be a neighbour's wireless or Airport network (not Bluetooth).
I cannot get the
airport configured at all...I keep getting error
messages.
Don't use the PC to configure the Airport Extreme Base Station, use the iMac, it will be easier.
The first one that appears says that my
wireless interface is not enabled.
You are probably trying to use the Airport Assistant, this will only work on a wireless computer, in order to configure an Airport Extreme Base Station (AEBS) from a wired PC, you need to connect to the AEBS via the LAN port and then use the Airport Admin Utility.
Connecting a XP PC to a Airport Network via the LAN port of the AEBS
http://www.ifelix.co.uk/tech/1007.html
However still configure the AEBS via the iMac.
I went to My
Network Places and set up the wirless network using a
USB flash drive. I connected it to the airport's
USB connection, and then to my iMac. Neither one
appeared in the list of devices detected when I
reconnected the flashdrive to my pc.
That Microsoft wireless process only works with other Windows PCs, it won't work with a Mac or the AEBS.
I've tried
rebooting, disconnecting and then reconnecting both
the modem and the aiport from the power supply.
Try using the Mac to configure the Airport network using the Assistant.
Should I reset the airport?
You may need to, but sounds like you haven't managed to configure it, so it will still be in the default state.
We also want to use the printer that is
connected to our pc with our mac.
Printing to a printer on a XP PC from a Mac running 10.4.x
http://www.ifelix.co.uk/tech/3015.html

Printer problems connected to iMac using Airport Express

I have an Airport Extreme functioning as a base station,and an Airport Express extending the range to an iMac i keep on the third floor of my house; my HP printer is connected to the iMac. My iBook laptop in my kitchen connects wirelessly to the base station's stronger signal. Previously, when I used a Linksys system, my laptop was able to 'see' the printer connected to the iMac; now I can't. (I also am unable to fileshare between the computers, even tho i have filesharing switched on.) What gives (on both the printing and filesharing questions)?

If you run the Airport Admin Utility on the iBook - does it "see" both the Airport Extreme Base Station and the Airport Express?
Double check that your broadband modem is connected to your Base Station's WAN port - that's the port labelled with the "circle of dots" icon.

Connect iMac to Airport Express via ethernet cable?

I get poor performance using AirPlay to connect to my stereo with the Airport Express on the wireless network in my apartment building. The wireless router is on a different floor, and on the opposite side of the building, which I believe is the cause of the intermittent signal -- the music cuts out and back in constantly.
However, my workstation is very near the stereo, so I think I should be able to run an ethernet cable directly from my iMac to the Express. How do I set this up, though?

Hi there frustrated newbie 2014,
You may find the troubleshooting steps in the article below helpful.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

Connecting macs and pcs together through airport express

i have had my first mac ibook for just over a week and have also bought an airport express thingy. my daughter has a windows pc laptop. is it possible to connect them both through the airport express so we have a wireless connection to each? i am pretty new to the whole apple mac and wireless business and dont understand about settings and putting codewords and numbers into the boxes that might pop up.
anne

Hi Anne,
Welcome to Apple Discussions
By connecting them you mean to have them both receive signal from the Airport Express to access the internet rather then make a connection for file sharing.
If that is the question, Yes you can. The easiest way of doing this is to set it up on the iBook G4 using Airport Setup Assistant. It will walk you, or your daughter through setting up the Airport Express. You want to assign it a password and your basically done except for your Windows PC. Does your Windows PC have a wireless card? Can you access the internet already? What you are going to need to do in order to connect to it is to join the network like you would any wireless network. I am not a Windows user (I try not to use them as much as possible), so I can't really help you with the Windows aspect of it.
You can also setup the Airport Express using your Windows PC, but I think it would be easier on the Mac.
You may want to look at the following...
Knowledge Base Document #166609, which will help you decide What kind of network do I want to setup (Mac)
Knowledge Base Document #163112, which will help you decide What kind of network do I want to setup (Win)
Knowledge Base Document #163103 on Setting up your AirPort Express or AirPort Extreme Base Station (Mac/Win)
Knowledge Base Document #106424 titled AirPort: Joining an encrypted wireless network
Connecting to the Internet using AirPort
Knowledge Base Document #108058 on Choosing a password for networks that use Wired Equivalent Privacy (WEP)
Jon
Macbook 2.0 White (100Gb HD 2Gb RAM) Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Connecting a G4 and an iMac by airport express

Similar Messages

Maybe you are looking for