Connecting a hp touchsmart all in one to a panasonic viera plasma 50 inch

Hi there,
Just got a new computer which is a HP Pavillion Touchsmart 20 All-In-one and theres no dvi just wondering how do i get my panasonic viera plasma 50 inch to connect to each other? I only have usb ports on comp and HDMI and usb on tv plus its got a ethernet plug on tv which is hooked up too?? lost n confused? TV also brings up media server of my comp? hopefully this makes sence to someone cheers

Hi,
What is the model you your touchsmart ? Thera are many of them around. Normally NO option for you to connect to a TV that why we call it as AIO which means it can run by itself. We need to konw the model of your machine. Under normal condition, you can use the following adapter or similar to connect to your Panasonic.
http://usbgraphicscard.net/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My HP Pavilion 23 touchsmart all in one touch screen is not working

My HP Pavilion 23 touchsmart all in one touch screen is not workin. I have restored the system. I didn't see any place in the pen and touch to disable or enable and not sure if i should instill drivers. What can i do?

Hello @junk4are,
I understand that you are having issues with your HP Pavilion 23 Touchsmart Desktop PC's touchscreen and are wondering if you should install your drivers. I would certainly recommend that you do so. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various versions of the HP Pavilion 23. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Windows 8.1 Pro upgrade issue (from Windows 8 Pro) on Envy 23 TouchSmart All-In-One...

Hello,
I have an HP Envy 23 Touchsmart All-In-One that I purchased a year ago (around 12/2012). It came preinstalled with Windows 8.
System Information:
a) Intel(R) Core(TM) i7-3770S CPU @ 3.10 GHz
b) 8192 MB of RAM
A few weeks after I had bought the system, I upgraded to Windows 8 Pro with Media Center that I purchased through Microsoft's upgrade program.
Last week (10/19/2013), I saw the upgrade option to Windows 8.1 in the store and decided to upgrade.
After a few minutes, I got a prompt asking me to restart the computer and I did.
However, I noticed that the screen went blank, but it really didn't restart - I saw that the hard disk light was still blinking and I waited for around 15 minutes. I know it didn't restart because if it did I would have seen the HP logo on the BIOS screen. A little later, the system went into sleep mode (at least, the power button light was blinking slowly as if it was on sleep). Since it was late at night, I decided to leave the system alone and decided to check on it next morning. Next morning, it was still in sleep mode (as I feared) - when I tried to wake it up from sleep by moving the mouse/hitting the return key, it made the exact sounds as if it was waking up from sleep (as it always does), but the screen was still blank. The power button slight was glowing steadily indicating that it is awake now.
At this point, I decided to power down the system by holding the power button for a few seconds. Upon reboot, I saw the HP logo on the BIOS bootup screen and then the screen went blank and nothing came up.
So I decided to do a system recovery using my Windows 8 recovery CD and powered down the system with the CD in its slot. This time, the system came up and immediately started restoring my OS to a previous version.
Upon logging in to the recovered system, I got the following message:
"Couldn't update to Windows 8.1
Sorry, we couldn't complete the update to Windows 8.1. We've restored your previous version of Windows to this PC.
0xC1900101 - 0x40019".
I tried reinstalling Windows 8.1 a couple of times after this. Once by disabling all the non-Microsoft services and disabling all the startup programs. Still the same result.
I don't have any antivirus software on my system other the default Microsoft system protection software.
Any help, much appreciated.
Thanks.
This question was solved.
View Solution.

I've posted the following on the following Microsoft form.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/81-install-error-0xc1900...
Since my hardware is the subject of this HP thread, I thought it might be advantagous to others to post it here too.
In the hopes of preventing anyone else expending this amount of time:
HP Envy 23, no external devices except wireless keyboard&mouse
1) Attempted 8.1 from MSDN ISO download and dvd burn. Result: 0xc1900101-0x40019
2) Attempted 8.1 from MSDN ISO download and dvd burn just because I didn't believe number 1. Result: 0xc1900101-0x40019
3) Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
4) Attempted 8.1 from Microsoft store just because I didn't believe number 3 Result: 0xc1900101-0x40019
5) Read online that Task Manager, startup, disable all would work. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
6) Read online that enabling security to admin group for Crypto directory. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
7) Read online that ensuring drivers are all current. MS update, HP update, physically clicked on each driver, update in Device manager, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
8) Read online that turning Firewall off, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
9) Woke up this morning and evidently Win 8.0 decided on its own to Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
Good news: Fall back to 8.0 has been flawless with the exception of the need to reenter the network key.
Bad news: Still on 8.0
Based on, in every case, the upgraded machine can be: Accessed via admin share c$ from a network device and can NOT be remoted into and the local display is 'illuminated' but not responsive and dark black (BSOD), my GUESS is a screen / display driver is failing on first boot to 8.1
I've reviewed everything on the C: drive with the extension "log" and a date close to the install date/time without success of isolating exactly what is failing.
Hope no one else expends this much time.
David
Professional Developer

Touchsmart All-In-One 310-1125y not powering up

Hello: My HP Touchsmart All-In-One Desktop PC will not power up. I have bought three different power adapters. The lights on the AC adapter and the back of the PC have come on with each of the adapters. The first two were 90W and I realized that I need 120W so the third I purchased is a Lenmar Universal 120 Watt (15V to 24V) power adapter. Once again, the lights come on but when I press the Power Button on my PC, the light on the Power Button flashes Three Times and does nothing else. Do I have to match Watts, Volts AND Amps or is Watts and Volts sufficient?
Please help me! I use this computer for my Karaoke shows and lost a weeks pay this past week because I could not correct this problem.
Touchsmart All-In-One 310-1125y
Windows 7 Operating System
Thank you for a quick response please?!!

Hello TCSMFX7:
             Here is your computers web site page this is where we begin at.   http://h10025.www1.hp.com/ewfrf/wc/product?product=5098882&lc=en&cc=us&dlc=en&lang=en&cc=us
Now we need to find the beeping codes.   Here we are .   http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+TouchSmart+310-1125y+Desktop+PC&prod... These are the codes but I wonder if flashing lights are the same because their isn't any thing about flashing light codes. Here is the beeping page    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02222922&lc=en&product=5098882&tmp... This page is for troubling shooting Start up failer.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01884928&lc=en&product=5098882&tmp...
       Ever thing is pointing to Bios error it is not a simple fast fix. It might require replacing hard drive or doing a factory restore using recovery disc only by changing the boot up from Name of your hard drive to CD/ DV Optical drive. Thats if you can get into Bios section to change the boot up order. Some computers use tapping f-2 key or Esc key and f-10 key as you start up the computer. Let's hope it's not in the motherboard.  Tapping f-8 key is your safe mode.
    Lets hope start up trouble shooting page has a fix for it.
frrw.

Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

Hi,
No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
Now, I cannot print out anything on my HP Photosmart C7180 All-In-One Printer! They don't
seem to be connected, as the printer icon shows up on my computer, and then, immediately, evaporates
into thin air.
How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

Hello Lady22:
When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk. Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

Can I connect my HP PSC1510 All-In-One to my BT H...

I've got a HP PSC1510 All-In-One printer, scanner, copier connected via ethernet (RJ45) cable directly to my desktop PC.
My PC is cabled to my BT Home Hub V1 (white).
My daughter and son connect wirelessly to my Home Hub and thence to the Internet.
Does anyone know if (and how) I can connect my PSC1510 to my Home Hub and so allow it to be shared by my hardwired PC and the wirelessly connected laptops?
I've looked in HP PSC1510 help but can't find anything that does help........
Many TIA

With some printers you can use the USB port on the hub. On the HH V1 its not that good, could still be worth a try. Install the printer on the computers, then move it to the HH, go back to the computers an set up an IP/TCP printer port (plenty of info on net how to do..IP address 192.168.1.253). It worked with 1 of my 5 printers OK, did strange things with the others (ie print 1 page the lockup). Would suggest you try it wilth the computer the printer is already connected to and if it works then try the others. If you do succeed then you will loose the use of the scaner on the printer.
Since you already (sort of) use one computer as a server (e-mailing prints) it would make more sence to share the printer over the network.
Zwilnik

Can't set up wireless connection for HP C4385 All-In-One with Windows 7.

Hi guys,
I just got a new laptop with Windows 7 64 bit. I already had an HP C4385 All-In-One that I was using with my last computer. I have also just set up a new wireless network because I got a new cable provider. So basically I needed to do everything from the beginning.
When I inserted the setup CD and ran the setup program, it said I couldn't continue because my OS was not supported. I went to the HP website and found the solution, which was to plug the printer in via USB and let Windows Update find the latest driver. Ok, that's fine, the printer works now when the USB cord is plugged in.
To set up the wireless connection, the instruction manual says I need to do it through the network setup wizard p on the CD. But that brings me back to my original problem-- the setup CD won't work because it doesn't recognise Windows 7.
So my question is-- how can I update the network settings (SSID and key) on the printer without the network setup wizard?
Thanks for any help, this is really driving me crazy!

Download from hp.com here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do i connect HP Deskjet 3050 All-in-One J610 Series to my Laptop

I need help to connect my HP Deskjet 3050 All-in-One J610 Series to my Samsung Laptop, can any1 help pls

Hi,
What is the operating system on your Samsung ? How do you want to connect it ? The following link is for Windows drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4066452
For Android, please use the following app:
https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Connecting my HP 8500A all in one to my HP all in one Desk top

I have completely set up my new computer which is a HP 18 all in one. I currently have a HP8500A Officejet Pro printer. I have checked all mu connections and I see it in the Device sections of setup, however, I must be doing something wrong because I can not print. I am not sure if I need new drivers or what must be done to make it work, can someone give me some advice?
Thanks in advance for any support in my hour of need.
Les1918

Hi @Les1918 , and welcome to the HP Forums!
I see you are experiencing print functionality issues. I would like to help!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Unable to connect or discover 8610 all-in-one / MAC & Win 7 64 bit

My 8610 all-in-one previous has been working fine as a wireless network printer for both my MAC OS 10 and laptop Win 7 64 bit. Suddenly the 8610 will not print from either device. I downloaded and installed the latest drivers for both from HP. I restarted all devices several times and finally reconnected the 8610 to the wireless network using the WPS button on the cable modem. The 8610 is showing a connection to the wireless network on it's display and the computers are both able to access the internet. Still no joy. Not sure what to do next. Suggestions ? ? ?

You can try the dds plugin from here:
http://fnordware.blogspot.com/2014/09/dds-plug-in-for-after-effects-and.html
There is also link on that page to a Nvidia plugin

Connecting to my wireless all in one printer.

I have a wireless LexMark x9350 all in one printer on my home network and the Macbook located the printer and i installed the printer but it gives me the following error messages. I sure could use some help in this matter.
Attempting to connect to host ET00200003601D.local. for printer prt0Network host 'ET00200003601D.local.' is busy; will retry in 30 seconds.

Just purchased two new Macbooks for the wife and I and I am used to PC just trying to make the change. How can I tell what my OS is? The Printer is connected by IP address because I can still print wireless by my old Dell.

Connecting hp deskjet 2540 all in one

How do I connect my go desckjet 2540 all in one to my iPad and iphone?

Hi @Krissy13
Welcome to the HP Forums. I would be happy to help you get your Deskjet 2540 onto your network. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect your iPad to the network that the printer is broadcasting. It is usually HP-setup-2540 and then part of the MAC address (printers hardware address). The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Open an internet browser and load up the Embedded Web Server (EWS) by entering the IP address into the address bar. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the left hand side to begin configuring the printer.
Once the printer is on the network, you can put your computer back on your own network and print again.
If for any reason this does not work, please let me know what operating system , and version you have? Mac or Windows?
If this does resolve the issue, please let me know by marking this post as "Accept as Solution". Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My iMac has stopped connecting to my HP all-in-one scanner

Several weeks ago I attempted to use my scanner that had been working fine on the installed Mac software but my Mac would not connect. The HP C5180 all-in-one works fine on print but not scan. I hooked up the HP to my laptop and all functions correctly. I installed the HP Mac software on my iMac successfully but again, no scanner. Any advice?

Shame. Are you connected via a cable or wifi?
Some others on here have often reported problems when using the HP software that comes with the printer/scanner and recommend completely uninstalling that using the HP Uninstaller and simply use the HP software that is installed on the Mac. Latest version here: HP Printer Drivers v.2.6 for Mac OS X v10.6
If that fails you could try 'resetting the printing system' - just possible it might clear up whatever is upsetting the scanning side.
System Prefs>Print & Fax, Control+Click or Right+Click on the printer and select reset printing system. It'll delete all your printers and they'll need to be added again.

Connecting a hp touchsmart all in one to a panasonic viera plasma 50 inch

Similar Messages

Maybe you are looking for