Connecting a new property to the main line
I am thinking of purchasing an old farm cottage and was wondering what the total cost would be to have BT connected from the main line, which sits to the side of the property?
Thanks
You would need to contact BT for that information they will be able to contact Openreach should a survey be needed
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
How can you get your phone turned back on if the main line phone is being worked on?
My brother shattered his phone & his phone is the main line so my service is off. Is there anyway to get it turned back on?
Hello soccergril2013,
If you unable to get your iPhone to show up on your computer, then pick on of the articles below that goes with the type of computer that you are using. Each article will have you look at using different cables and checking drivers.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591
Regards,
-Norm G. -
Can I click and drag a clip to a new location on the time line ?
Can I click and drag a clip to a new location on the time line ?
Did you try?
-
help.I have an itunes account and wanted to set up a new one .All my music from existing account loaded automatically onto new itunes account.The main point of this was to start with a blank canvass
Yes
Put all the music on one computer, make sure it is authorized for all accounts, sync. -
When composing an email and I end a sentence with any sentence ending character like . ! ? etc. and then start a new sentence on the same line with a space or 2 after the . ! ? etc. ( no carriage return ) the font changes to a smaller font than the one I have set. My set font is Helvetica, Arial . This happens almost all the time, if I backspace to the end of the sentence, and then put in the . ! ? etc. and start the new sentence, sometimes it works ok and the font does not change.
When composing an email and I end a sentence with any sentence ending character like . ! ? etc. and then start a new sentence on the same line with a space or 2 after the . ! ? etc. ( no carriage return ) the font changes to a smaller font than the one I have set. My set font is Helvetica, Arial . This happens almost all the time, if I backspace to the end of the sentence, and then put in the . ! ? etc. and start the new sentence, sometimes it works ok and the font does not change.
-
Hello,
I am running a sql job which runs SSIs pakcage imported from Integration Service Sever..
it give me this error.... the server is :10.2.8.39 and the database is process
how can I fix It?Hello Arthux ,, thx alot for your help,,, I run the job again and this time it gives me this error ??
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
11/28/2011 13:58:09,SSISScoreCardsSDM,Error,0,OPLINKDEVINTRA\OPLINKDEVINTRA,SSISScoreCardsSDM,(Job outcome),,The job failed. The Job was invoked by User LINKDOTNET\michael.philip. The last step to run was step 1 (SDM).,00:00:01,0,0,,,,0
11/28/2011 13:58:10,SSISScoreCardsSDM,Error,1,OPLINKDEVINTRA\OPLINKDEVINTRA,SSISScoreCardsSDM,SDM,,Executed as user: LINKDEV\OPSQLADMIN. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft
Corporation 2010. All rights reserved. Option " /CONNECTION" is not valid. The command line parameters are invalid. The step failed.,00:00:00,0,0,,,,0 -
sql server:- 2008 r2 stardard edition
os:- 64
Package is password procted.
following is command line in ssis package .
/FILE "E:\PostgressToSql_IPMS\PostgressToSql_IPMS\PostgressToSql.dtsx"
/DECRYPT /CONNECTION "Server.user";"\"Data Source=server;
User ID=user;Provider=SQLOLEDB.1;Persist Security Info=True;
Application Name=SSIS-Package-{DD33AC67-4A45-40D6-AF70-4BBD421931C1}BPOSQLDB01\BPOSQLDB01.log4BPO;
Auto Translate=False;\"" /CONNECTION "server.conn 1";
"\"Data Source=server;User ID=log4BPO;Initial Catalog=edb1;
Provider=SQLOLEDB.1;Persist Security Info=True;Auto Translate=False;
Application Name=SSIS-Package-{665E3825-6AFC-4DD3-ABC8-50B5F0F18EEB}server.conn 1;
\"" /CHECKPOINTING OFF /REPORTING E
Need change something? Seperate configuaration file required ?Hi Dinesh,
Based on my research, the issue is caused by you are running a SSIS package with a connection manager that has a space-character in the connection name.
To work around this issue, please refer to the following two suggestions:
Rename the connection manager in THE package to not include certain special characters (spaces, dashes). Note that the connection manager name can be changed without having to edit any property of the connection string itself.
Escape quote the connection name, such that
/CONNECTION "server.conn 1";"..."
becomes
/CONNECTION "\"server.conn 1\"";"..."
The following similar issue is for your reference:
https://connect.microsoft.com/SQLServer/feedback/details/510869/dtexec-commandline-fails-when-connection-is-passed-to-commandline-and-connection-name-contains-a-space
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
My iMac thinks a VGA monitor is connected, and that it's the main
Hello,
I have been looking around this forum, and the web, for an answer to my problem. I haven't found one yet.
My problem is that I sometimes connect my TV to the iMac, using the appropriate adapter, and now the computer states that a "VGA Display" is always the main monitor, and the iMac Display is the secondary, even if there is no other display connected.
System profiler says, under Graphics/Displays:
Chipset Model: GeForce4 MX
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0189
Revision ID: 0x00a3
ROM Revision: 2032
Displays:
iMac:
Display Type: LCD
Resolution: 1440 x 900
Depth: 32-bit Color
Built-In: Yes
Core Image: Not Supported
Mirror: On
Mirror Status: Hardware Mirror
Online: Yes
Quartz Extreme: Supported
VGA Display:
Resolution: 1400 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: On
Mirror Status: Master Mirror
Online: Yes
Quartz Extreme: Supported
I have reset PRAM, Open Firmware, created new user accounts, and totally wiped the hard drive and reinstalled Tiger. Still, the stupid "VGA Display" is ever present.
Thanks a million in advance to anyone who can help me out of this mess.
iMac G4 17" 1Ghz Mac OS X (10.4.6)
iMac G4 17" 1Ghz Mac OS X (10.4.6)hi,
i understand what's your problem because it's the same for me.
it's about 2 years that i call Apple and they don't know how to solve it !
In this 2 years they change me motherboard, connector/cable TV,
but everytime the same problem return !
After that i used my iMac to mirror my photos in tv and unplug the adaptator, my iMac think that there is a Vga monitor... but it didn't !
If you go in the system profiler/monitor you'll see the the mirror is on.. strange.
i'd try also with 3rd part software to change the option monitor but... nothing.
i'll hope that we can solve it !
sorry for my english.. bye -
Issue in connecting sub VI programs through the main program
Sir/Madam,
I have made a few sub VI programs of 'Keithley 2400', but I am having problem in connecting them together through the main program. Actually the created sub VI programs are not showing any activation button when I connect 'action.vi' file in 'read.vi' file (attachted).
Please give suggestions.
Regards
Yachika Manglik
Solved!
Go to Solution.
Attachments:
action.vi 24 KB
read.vi 14 KB
write.vi 24 KBHello
Thanks for your suggestion.
I have successfully implemented connections in my code according to your given suggestion .
Now I am facing problem to link a file named 'control1.ctl'(attached) that I have made for selecting option 'select type of action' and need to add' control1.ctl' in 'read.vi' file. It is showing following error( below).
Error: " required input ' GPIB action' is not wired.
OR
"Enumeric conflict"
So can you please suggest how this error can be removed?
Attachments:
Control 1.ctl 5 KB
read.vi 13 KB -
How to install Photoshop cc on a new computer as the main when it is already on another?
Buying a new computer and I want to make it the main one for Photoshop cc instead of the older computer it is already on. What is the process for that?
You're entitled to activate CC on up to two computers at the same time.
On the new computer, sign in to https://creative.adobe.com/products and download your apps. -
Hi!
I', m working with TestStand Version 4.2.1. I have a main sequence, which calkls different subsequences. All these steps are properly reported. One of subsequences runs as "new thread". How can I include its results in common test report of the main sequence?
I have markes variables of the subsequence as it is requred for test report (it works OK if it is not a new thread). If the the numerical test, which is executed in this subsequence is correct, I get no results at all. If the numeric test failed I get somewhere in the main sequence report a "red message", that test failed whithout any reference to the step or values of vaiables which were not correct.
I tried an option "On the fly" in the Report Configuration , but haven' got any useful results. What shall I do?
Best regards
Solved!
Go to Solution.Hi,
I tried it but without success:
1) I got a reference to the Thread as "Locals.Step1=RunState.Thread" for every of 2 steps which start a thread
2) I put both "Waits" after steps with (and without) threads, at the same place, where they were before
3) The sequence run OK, but when it came to Wait for Thread 1 it waited for ever, I had to terminate sequence
Does it mean, that I got a false reference (suppose No - please, have a look at attached pic)?
Or does it mean, that Waits are badly placed in the sequence (threads are already terminated)? Here is a pic of sequeces calls with Wait after them.
Regards
Attachments:
Thread.JPG 34 KB
SequenceCall.JPG 32 KB -
Can I create a new folder using the command line interface
Hi.
Is there a way to create a new folder in an existing business area, from the command-line?
We have an application that provides an interface for the user to create a table and load flat file data into the table. After loading the data, the user will verify the loaded data using discoverer. If there is a command line interface to create a new folder, then the script that created the table can also call the discoverer command line to create a new folder for the new table. Is this possible?
ThanksHi,
I think I am having a similar question here. I am using Oracle 10g on Windows xp.
I logged in to Oracle from command prompt. I used command create directory myFunDir as 'd:/funDir';. Oracle returns: Directory created. But I couldnt find the directory myFunDir! Where is it?
Thanks.
Newbie. -
Cannot get Itunes to accept my new computer as the main one.
My old computer is about to go. I purchased a new laptop and want to make it my main computer, but itunes will only accept me as a home sharing computer. Does any one know how I can make my new laptop the main one so I can get rid of my old one?
You can only have 5 computers authorised at the same time. If you won't be using the old computer you should deauthorise it.
Don't try to transfer your library via home sharing, simply copy the entire iTunes folder (and all subfolders) across the network or via an external drive. If the media folder is not a subfolder of the main iTunes folder that holds the database files (or you have any media in other locations) then these folders need to end up at precisely the same paths on the new computer as they had on the old one, otherwise as long as the media folder remains a subfolder of the iTunes folder all should be well.
tt2 -
JUST AN FYI FOR THOSE OF YOU ON THE MAIN LINE...
So I decided to check for myself and went to Verizon today to ask about my next upgrade. Since I'm the primary line on the bill, I will be receiving an early upgrade. Just thought I'd let everyone know that if you're the primary line on your plan, then you get to upgrade early. =D
Yeah. I just had never heard of it before. So...if I upgrade early then I don't have a NE2 plan anymore? I'm a little confused. If I wait, then the early upgrade is gone?
I'm on a family plan with NE2. Technically they have to let me upgrade at some point even if I upgrade early this year, next year they will have to let me upgrade again. They can't just take away my NE2 without notifying us first. We have no received any paperwork with our bills or anything explaining that this is going to happen. I'm not disputing what you are saying or trying to start a fight, I just don't understand. -
Connect 2 new extreme in the same net.
Hello!
I have 2 new extreme and I want to connect them to expand the area of my wireless in the house.
But it does not seem to make me do this. it say that I have to change the net when I try to install the 2. one.
is there somebody who knows how to do this?
Step by step would be fine!
thanks!I just finshed replacing 2 expresses that I was using with my extreme with two extremes for a total of three extremes on my network. I upgrade mainly for the ability to share disk's at each location as well as having the additional ports. Cost difference of 70 bucks seemed trivial.
I set the first using the create network option.
I set up the 2 additional's using the extend a network option and using a ethernet cable. Keep in mind, that if you try to do this using only a wireles connection, you can't manage extreme's that are not part of you current network. You will have to join the network of the extreme you wish to add to your core network, then rejoin your core network to finish the config.
One thing I learned from this is that interface robustness is not compatiable with a multilple extreme network. As soon as you enable interface robusness, your extreme's will go off line.
Maybe you are looking for
-
App Store keeps crashing on iPod touch 4g
I want to buy a game for my 32GB iPod touch 4g, but I am having a lot of problems with it. First off, the App Store ALWAYS crashes whenever I go to search for a game, so I have to keep restarting it. Second, the Home button is jammed, so I can't do a
-
Adobe Acrobat 9 Pro Printer Drivers does not pass windows logo testing.
Issue: I'am using the Acrobat Wizard tool to customize Adobe Acrobat 9 Pro to run create Adobe installed to run siliently within our network but I recieve the following hardware prompt to complete the install. During the install of the Adobe Acrobat
-
How to assign the downloaded file path in dropdown menu dynamically?
I have one jsp page. In that jsp page one dropdown menu is there. Dropdown menu contains "save" and "saved content". I download the file using "save" option in menu. That downloaded file path is assigned to the below of the "saved content" option. Th
-
No Shake to Shuffle for iPhone 3G iPod?
No Shake to Shuffle for iPhone 3G iPod with 2.1? iPhone 3G also has accelerometer but when I shake my iPhone 3G, the song does not shuffle to the next track.
-
Create Material Code, while creating Document in CV01N
Dear All, Can I Create Material Code, while creating Document in CV01N, So as i could maintain the same code structure as documents. Regards Raghu