Connecting a performa 6400 to a iBook G3 700 mhz

I could use some ideas on how to access my performa 6400 by hooking it up to my G3 iBook. I don't believe the Performa has a pci card.

Yes, the COMM slot is at the bottom of the vertically-oriented motherboard, so the card is parallel to the floor of the chassis. Not so long ago, one could find a dozen of those motherboards listed at eBay, but now - I was fortunate to find one. Even with a G3 processor upgrade, the seller of this motherboard will have to settle for substantially less than his Buy-It-Now price.

Similar Messages

  • AV Connections on Performa 6400/200

    Hi,
    I have a Performa 6400/200 running OS 8.6 with 256MB of memory.
    The back of the computer has a set of RCA and S-Video connectors. Both input and output. The circuit board is identified as "Avid Technologies."
    Does anyone have any information on what is required to use the AV hardware? Can I connect a VCR and copy video to the hard drive?
    Thanks,
    Sy Bensky

    Your 6400 has the Apple Video System option installed, so if you do an advanced search of the Knowledge Base for it (select "Include content created prior to 1997"), you should be able to find some info about it. As I recall, it shipped with the Avid Cinema program, but the Apple Video Player program functions with it also. There was also an option for a TV tuner or FM tuner, allowing you to watch TV or listen to radio on your 6400. The Apple Video System was more of a high-tech toy at the time, but 10 years later - it's really low-tech. It was certainly never intended for high quality digitizing of analog video for full-screen display. The 603e/180 or 200 MHz processor and limited 1 MB of DRAM for onboard video support aren't capable of handling serious video work. For amusement purposes, you can connect a VCR and watch small-screen video and/or create and save small QuickTime video files.
    Incidentally, the maximum supported RAM in a 6400 is 136 MBs - 8 MBs soldered to the motherboard and a pair of 64 MB DIMMs in each of the two RAM slots.

  • Can't re-install OSX 10.1 on iBook G3 700 MHz

    Hey,
    When I try and install the OS either by software restore or the OSX disc itself, it can't find the HD. A previous install attempt went sour and now I think I'm paying the price. I think the HD is okay physically.
    I have a powerbook and external FW HDs if this might help.
    thanks,
    Crazy

    Hi
    If you do have a firewire hd, try it out. Just hold option as you boot to choose it, if you can start up off it, you can see if your hard drive works. Do you gave tectool? It comes with the applecare cd. It can tell you if anything is wrong with the hd. Or, an apple store will test it for you. You might need a new hd, though, as it is strange it wouldent be recognised.
    Hope this helps
    ps...if you have a firewire cable, you can boot off the powerbook, just hold f as you boot. Your hd should appear.

  • Connect MacBook to Performa 6400

    I want to connect my Performa 6400 to my MacBook. Both have Ethernet. What's the proper technique?

    7.5.3 and later File Sharing
    Any Mac running 7.5.3 or later can share the files of any Mac running OS 9 or later using built-in File Sharing using IP. What is not supported beyond 10.3 is File Sharing via AppleTalk. In addition, Sharing initiated from your 10.4 or later Mac to a Mac before OS 9 is not supported directly. So you will have to make the connection from the Older Mac end. Alternatively, you could install "Shareway IP" (a low-cost utility) on the older Mac and connect from the newer Mac.
    The 6400 sometimes has trouble when connected to another computer directly, rather than through a Router, Switch, or Hub. The 6400 often has to be connected to an Active Ethernet port AT 6400 STARTUP, or its Ethernet port cannot be selected in the TCP/IP Control panel.
    A good general description of this sort of connection process appears in this illustrated article:
    Car1son's OS 9 to OS X 10.3 File Sharing Setup
    Several links near the top of the page point back at Apple KnowledgeBase articles for network setup, etc.
    Message was edited by: Grant Bennet-Alder

  • Connecting my Powerbook with my old Performa 6400...

    I want to retrieve some files on my old Performa 6400 and copy them to my Powerbook running Mac OS X 10.4.8. The old Mac is running system Mac OS 8.
    I have tried via ethernet but neither Mac seems to be able to see each other.
    Any good suggestions?
    Regards
    Crewcut

    Jaquar, may pose a problem, but if there is a way it can be found at this site.
    http://www.ifelix.co.uk/tech/windowsxp.html
    Good Luck.
    Don

  • File sharing with Leopard through dial up modem on Performa 6400

    There are some really important files that i need to get off my Macintosh Performa 6400 (running 8.6) but the only connection that my iMac G5 (running 10.5.4) and the performa share is the dial up modem. I can't get an internet connection on the performa since we have broadband and it does not have an ethernet port, so that's out of the question. Some of the files are too big to fit on a floppy and my iMac doesn't have a floppy drive anyways.
    I turned on file sharing on both computers, but they don't see each other being as they're connected through the dial up modems. After having searched up and down Google with no answer, my question is: is there anyway i can file share through the dial up modem using the aforementioned configuration?
    Since I'll only need to do this once, I don't want to have go out and buy something in order to get this to work.
    Thank you for any and all help you guys may provide.

    I realise that you didn't, originally, intend to spend anything but, if you have a spare PCI slot left in your 6400. I wonder if maybe installing a Keyspan USB PCI card would help. That way the 6400 could communicate direct with the G5 and save the hassle of removing its HD.
    http://www.allmacshop.co.uk/proddetail/19184/KeyspanUSB_PCI_Card_2-Port_Mac_Win__UPCI-2/
    The manufacturer's part number is UPCI-2.
    I installed one of these in my PowerMac 6500/300. Turned to be one of my better decisions as I was then able then to import photos direct from my digital camera and all sorts.
    Or there's this which is better still-
    http://www.macheaven.co.uk/?page=proddetail&prod=1343
    Check compatibility with your 6400 though as I don't have one of these so I don't know if it works or not. Don't see why it shouldn't though.

  • Performa 6400 & Mac IIcx

    I have both a Performa 6400/200 and MacIntosh IIcx. Both I want to transfer the data from each to my G5.
    The Performa has the following ports:
    1. 25 pin scsi female connector.
    2. 8 pin din female connector (printer icon)
    3. 8 pin din female connector (modem icon)
    4. 6 pin phone or ethernet jack (not sure which).
    The Mac IIcx has the following ports:
    1. 25 pin scsi female connector.
    2. 8 pin din female connector (printer icon)
    3. 8 pin din female connector (modem icon)
    There is no modem in this IIcx.
    Can data be transferred through the scsi cable with a scsi to usb adapter? I'm hoping I can just access the hard drive some how in each of these old units (not simultaneously) as if they were external HD that shows up on my G5 monitor.
    Any suggestions would be greatly appreciated.
    Thanks.
    Gene

    Hi Gene,
    Could you confirm that this cable would work for what I want to do?
    That appears to be something that might work. However, the link to this product could possibly be even more interesting.
    Also, can't I just leave the HD in the 6400 so I can use its power supply and unplug the IDE cable from the 6400 and plug in the IDE/usb adapter?
    In principle, yes. Depending upon how the adapter is connected and powered, you may or may not encounter interference problems, though. It may be better remove the entire drive (or at least all cables connected to it) and use both the IDE interface and the power supply from the external device.
    Then once I have it hooked up, I assume it will show up on my G5 as another drive, right?
    Yes, that is the idea.
    Also, I'm hoping I can do this without hooking up a monitor on the 6400 since the 6400 HD will be now acting as an external HD to the G5, right?
    Yes.
    With regards to the IIcx, can I not access it the same way using a scsi to usb adapter of some kind?
    When the first iMac was introduced, there were USB-to-SCSI adapters. The question is whether these (if you can find one today) will work well at all (and with your G5). Someone else may be able to provide you with more information about this.
    If this won't work and assuming I have to connect using an 8pin din cable between the 6400 and the IIcx in their respective printer ports, would I have to have monitors on both units so I can see the file sharing software work or could I operate the whole thing from the 6400?
    You would, normally, need monitors on both units.
    Is the file sharing software part of the mac operating system or is that something I would also have to install? Could you elaborate on how I would do this?
    File sharing has been part of the Mac OS since System 7. It is not difficult. AppleTalk has to be on. Basically, you would enable file sharing on one of the computers. The other can then connect to the former computer (via the Chooser). The manuals and the built-in help system describe to do this.
    Good luck! Do not hesitate to post again if there are additional questions.
    Jan

  • Performa 6400 fails to show video

    Hi there,
    I have a performa 6400 that is upgraded with a G3 sonnet card. It was working really well for such an old machine until I moved it to a new office. Now when I start up the machine, the monitor light turns 'green' for a second, indicating it is connected but then quickly turns off as if a signal is not getting through, although the machine sounds like it's starting up normally.
    It does have a PCI rage pro ATI card in one of the slots which has always worked perfectly, but after this I disconnected it, removed it and used the built in video but the effect is the same. Any suggestions, recommendations?
    Thanks
    Kevin

    You may look at:
    http://www.whoopis.com/computer_repair/
    for
    PerformaPM_64006500.pdf
    for troubleshooting.
    You may also look at:
    http://www.zone6400.com/

  • My new iPhone 4S can't connect to iTunes, App Store or iBooks via Wi-Fi. Works with 3G network. How to fix this?

    My new iPhone 4S (week old) can't connect to iTunes, App Store or iBooks via Wi-Fi (and some other apps e.g. Hollister – but most of the other apps like Safari or ebay work fine). There is no problem with those apps loading via 3G network. When I turn off the wi-fi, it runs over 3G and i can access App store without any problem. When i turn off the 3G network and turn the Wi-Fi on, those apps like App Store won't work, other apps work fine. When i turn on both Wi-Fi and 3G, the App store (and so on) is also not working, other apps are.
    I also found out that when the Wi-fi is on and I sign out my apple ID, the App store starts working! But when I log in again, it will imediatelly stop working. I've tried logging in with others apple IDs, still with the same result. There is no problem with my apple ID account, because it works on my iPad, even via Wi-Fi.
    When i first set up my iPhone, there were no complications using App store ia Wi-fi with exactly the same account. I don't know if it has anything to do with it, but this problem started when i logged in with my UK account and then wanted to log back in with my Czech account.
    I tried turning it off, hard reset and deleting my iPhone several time (even without back up). Nothing worked since then.
    Does anyone have any idea how to fix this?
    I would really appreciate ANY help. This porblem is driving me crazy!

    I am also having the same issue. Please help!

  • New OS on Performa 6400/200

    ok, picked up a performa 6400 at the thrift store, it needs a new os. Have tried 2 different copies of os 9.04 i have, neither worked. Is there any trick to his I am missing?
    It is also possible that the lens needs to be dusted off, cause most of this comp was very dusty. I have tried a lens cleaning cd, but that lead to no change, and I can't get to the lens to manually clean it.
    EDIT: I have also tried to use the Network boot floppy, but that didn't work
    Message was edited by: freak

    Were the CDs of OS 9 white with an orange 9? This is a retail installer with OS 9. If the CD is gray, it's for another model Mac & probably won't work.
    Here's the spec sheet on the Performa http://www.everymac.com/systems/apple/macperforma/stats/mac_performa_6400200.html The spec sheet shows the supported OS as 7.5.3-8.6, 9.0.
    There's a great site for the Performa at The 6400 Zone http://zone6400.com/
     Cheers, Tom

  • Connect my iMac G5 to my iBook with CAT 5

    I am trying to connect my iMac G5 to my iBook in another room.
    I have run CAT 5 cable through the attic to the other room. When I make the connection there (about 40 feet) it works fine. But when I add about 15 feet more of cable, it fails. I have tried 3 different pieces of cable (all from the same spool) and none work. I do not have any of the cable that is working left to test. Can 2 different manufacturers of CAT 5 cable be incompatible? Have also used a volt meter to check continuity.
    Can the extra 15 feet be creating the problem? I seem to remember a few years back in OS 9 there was a setting to change for longer cable runs. I can’t find settings to change for for OS X 10.4.3. Is this even necessary?
    iMac G5   Mac OS X (10.4.3)  

    Have a look at some of the posts in this thread HERE for a discussion of similar problems with runs over about 40 feet, Classic Guy.
    It may be that you are losing some current through resistance in any connectors. Another possibility may be that there is some local interference source in the vicinity of the junction perhaps? Any chance one cable is Cat5 and the other is Cat5E (though I'm not sure this would matter - some people recommend using Cat6 for any patch cables.)?
    You might find this guide useful too.
    Its not uncommon to run into problems with long runs, especially when junctions are involved as well.
    Cheers
    Rod

  • Performa 6400/180 been hacked

    Hi,
    Long story short, my performa has been hacked, and I can't do much now. Floppy disk: When inserted, it asks to initialize, then after done, it says " Cannot initialize, Disk is defective!"
    It will read cdroms fine, but I don't know if I can use a 7.5 iso to boot from, or if it will let me boot from floppy at startup.
    I was thinking of putting a whole new hard drive in, and trying to boot off floppy/cd, but having a hard time finding a 7.5 iso, and don't know what to do.
    Thanks,
    Abdul.
    PowerPC Performa 6400   Mac OS 8.6 or Earlier   spare pc hdd, old mac keyboard+mouse,

    >"my performa has been hacked"That is unlikely, but I would be willing to believe it is not working well. Have you run Disk First Aid? What version of Mac OS is it running now?
    >"Floppy disk: When inserted, it asks to initialize, then after done, it says " Cannot initialize, Disk is defective!"That is normal behavior for a drive that is very dusty, or has dirty heads.
    There is also a known problem with more advanced Mac OS and certain models of floppy drives. A different floppy drive is sometimes needed to use Mac OS 9. This article has details:
    http://www.zone6400.com/OS9.html#OS9_floppyissue
    >"It will read cdroms fine, but I don't know if I can use a 7.5 iso"You need either a System/Install CD for exactly your Mac, or a "Full Retail" CD (for any Mac). Mac System CDs were never issued in ISO format, always in Mac format.
    Your Mac was released with 7.5.3 and an enabler, so it can theoretically boot from any diskettes or "Full Retail" CDs after that.
    >"I was thinking of putting a whole new hard drive in, and trying to boot off floppy/cd, but having a hard time finding a 7.5 iso, and don't know what to do."
    You need to work on one problem at a time. Making multiple changes at once will guarantee that your Mac will never work again.
    A known problem with these older Macs is the PRAM battery wearing out. If you have not changed it in the last few years, you should consider doing that first. These use a 4.5 Volt sealed Alkaline Ray-O-Vac 840, 841, 0r 842 or equivalent. It is a black cube shape about 1 inch (25 mm) on a side.

  • Performa 6400 data, identity at risk?

    I'm another one who's hung on to her Performa 6400/200 thinking I would use it for something, but now have to clear space. Those big original boxes sure eat up real estate!
    I think there is stuff on the HD I want to clear off, possibly for personal security/identity/bank(?) reasons but the monitor battery is gone, so I can't start it up to see.
    If I take the machine to a recycling depot, would there ever be any risk for the info on the HD to be used? Is that anything anyone would bother to do?
    Suggestions appreciated!
    Message was edited by: Sk8grrrl

    Boot from an OS 9 System/Install CD and run Apple System Profiler or Disk Utility (from the Utilities Folder at top-level on the CD).
    You are looking for a drive that is not your CD or Zip drive (if you have one). It should be on the ATA Bus at address 0. If present, note carefully what error message you get with it. If absent, it is dead, and no risk to your privacy.
    The following may be far more work than you care to tackle:
    One last desperation move: on that model all the signals, even those going to the drives, go through the Big Connector at the back of the motherboard. The fingers are gold-plated to reduce corrosion, but sometimes corrosion builds up and causes problems. It can be cleaned a bit by removing and re-seating the motherboard.
    Look at the backpanel where all the cables plug in. Disconnect all the cables. that plastic panel is just decorative, and snaps out with some latches along the edge. Underneath is a metal panel. It may have two or possibly three Phillips-head screws holding it in place. It also has a wire bail handle stowed under a tab in the sheet metal. Once the screws are removed, you will apply tremendous pressure on the wire handle to slide the motherboard straight out less than an inch. At that point it becomes free of the connector and will slide out the rest of the way easily.
    You can remove it if you like, or just re-insert it and try to see if your hard drive appears. The wiping action of removing and re-inserting cleans the contacts somewhat, and sometimes that is all that is needed.

  • Performa 6400/200

    I have a Performa 6400/200 running Mac OS 9.1. I have installed two 64 MB 2k refresh rate RAM modules. The Mac now refuses to boot with them installed. I have already replaced the PRAM battery & pressed the CUDA reset button on the logic board. The Mac still refuses to boot. It only gets as far as the Happy Mac icon & then freezes. It didn't come with a network card either. Where can I get a Farallon 10/100 comm slot II ethernet card? I have already tried eBay with no luck in finding one too. Should I assume that the RAM is Fast Page Mode & thus incompatible with this Mac? I also have a spare logic board of the exact same model I can test with too to eliminate the possibility of a bad logic board. I have already tried zapping the PRAM too & it has no effect on the Mac. It still refuses to boot. What should my first troubleshooting step be?

    The 6400s can use FPM or EDO memory, although the 6400/200 that shipped with a BTO Zip drive was supposed to support/take advantage of the faster timing of EDO memory. Although the motherboard is very similar to the 6400, the 6500 had some hardware improvements implemented, and should really use EDO memory, although FPM can be used in them.
    As for the memory that you installed, are there 16 chips on each side of the DIMMs? A compatible 64 MB DRAM DIMM has a total of 32 chips on it. Fewer overall chips would indicate the use of higher density chips, which the 6400 can't support. Are you certain that you aren't using parity DRAM, used in PCs? Do you hear the sound of breaking glass at startup? If you have any other 5-volt, DRAM DIMMs (1K or 2K refresh) that you could try, you'd be able to determine if the startup problem is memory-related. The use of a DIMM with a 4K refresh rate causes the memory to be recognized at ½ of its specified density, but the computer should boot with it installed. Some time ago, I remember reading (in the Forums) that some 6400 users bought/installed a pair of 128 MB DIMMs with a 4K refresh rate, because they were less expensive than the 64 MB (2K) DIMMs. Since they were recognized as 64 MB DIMMs, the total installed memory was 128 MBs + the 8 MBs onboard.
    Did you search the web (beyond eBay) for the Farallon (Proxim) 10/100 ethernet card?

  • Unable to connect to CMS :6400

    Hi Everyone,
    I just finished installing CR Server 2008.  I've been looking though posts and user guides and can't seem to find an explanation of what I am missing.  I have everything installed.  I had it create a new SQL database with a user name and password but I am unable to log on to the Business View Manager. I can get to Central Management Server, Central Configuation Manager seems to be running fine and when I run the the BO XI 3.0 Deployment Diagnostic Tool everything passes except the "Crystal Reports Tier".  Can someone point me a direction to address these things.  This is my first experience with anything beyond Crystal Reports or Xcelsius.
    The complete error message I get is below;
    Unable to connect to CMS :6400. A wrong connection is made to @@WIN-KP9N33QGFL:6400(WIN-KP9N33QGFL:6400). Logon cannot continue.
    Thanks,
    Thomas
    Edited by: Thomas Rao on Oct 7, 2009 5:04 PM

    Question was answered by SAP Support.  We used the computer name and port for the system information when logging in.
    EX: Computer123:6400

Maybe you are looking for