Connecting a photosmart A309 to an Andriod Phone using Bluethooth,connection problem

This was done using the "Printshare App" from Google.
Test page printed fine.
Key was bought.
A PDF file was printed,again worked fine(with the exception that the inkcartridge in the printer started to run out)
Another document was tried but wouldn't print.
An error message comes up that the printer needs to be "paired".
But the printer is detected on the mobile phone.
It is in the App's list.
New cartridges were installed,printer works on laptop with a USB cable.
Anybody got any idea's as where to look?

Hi,
Have you tried this:
   https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes a lot!

    My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes! What should I do!?

    Did you try the basics from the manual?
    Restart, reset, restore

  • I cannot send a text message to an andriod phone

    I am trying to send a text to one of my contacts who has an andriod phone but it is notgoing through.. Do I have something in my settings wrong?

    Did they have an iPhone previously?
    Try deleting the contact and readd it.

  • TS2755 can i send imessage to any non ios devices like any andriod phone

    can i send imessage to any non ios devices like any andriod phone?

    I'm pretty sure you are full of it unless it was for a specific carrier messaging option. you CANNOT use iMessage with android devices. only iPhones, iPod and iPad running iOS 5.1.

  • Can i put itunes on my andriod phone

    I want to get Itunes on my andriod phone. Is this possible?         

    Music from the iTunes Store is in industry-standard AAC, so if your Android phone can play that format, then yes, you can use that music on your phone. You'll need to use whatever procedure your phone provides for transferring the tracks; iTunes does not sync with non-Apple players.
    Regards.

  • Andriod phones help please

    This is my 3rd Andriod phone.  I'm looking for one with a good battery, different ring tones for contacts and be able to use a different ring tone for text message alerts.

    Thanks for the information everyone. Yes, depending on what apps you download, how much you use internet, emails, phone calls and other features will depend on how long your battery will last. 
    Additionally, if your looking for an Android devices that can have different ringtones for calls and messaging, we have many different phones that will fit your needs. I have listed a few below to review:
    --Lg-Ally
    --Motorola Droid X
    --HTC Thunderbolt

  • I downloaded an album on my phone, using my itunes account which is connected to my mac and the album is not showing up on my mac, what do i do to get it onto itunes on the imac?

    how can i get the album i downloaded on my phone, using the same account on the imac and it is not showing in the IMac's itunes. How do i make it show up?

    You should be able to copy it from the iPhone to your computer's iTunes via File > Transfer Purchases

  • IPhone 4 3G Connection Problems

    Hey all,
    Since July 1st I have been through 3 new Iphone 4's and 2 SIM cards. The problem I have is when I try to use the internet though 3G. It will work once or twice for a few seconds in the morning, then it will either time out or just display the following messages "Safari Couldnt Open Page" or "Network Lost" and "could not activate cellular data network". I have called Telus (my provider) with no luck at all on the problem. I have reset every setting, I have installed software from new again, I have done everything possible. Wifi works flawlessly, but for some reason, my phone just doesnt want to connect to the internet using 3G. I know it's not my area and not my specific handset since I have had 3 of them. All 3 phones have been brand new and are locked to Telus, never been jailbroken or anything to that effect. Incase anyone would suggest to double check my APN settings, Telus does not allow their customers to access that feature, so it is not "shown" or available on the Iphones locked to Telus (which I obviously have). My phone always shows 4 or 5 bars by the way, and always says "3G". One interesting point is when I am able to catch a break and get a conncection, if I load my local radio station app and start streaming, i can then go to safari and my internet works just as good and fast as long as I am streaming, but that is only on the rare occassion that I can get on the net at all. So with all that said, does anyone have any suggestions at all?
    iOS 4.3.5
    Thank you!

    i am on 4.3.3 with iphone 4 and have had that problem for almost a month now. I tired resetting all settings, resoted the firmware version and it didnt help, however, once i removed my simcard and reinserted it back in and worked fine for a couple of days, but then it went back to normal. it randomely connects to internet and randomely disconnects using 3g. no problem with wi-fi.
    I am with Three network by the way.
    is this some kind of hardware fault or software?
    at least i am not alone, lol.
    please help

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • Why does my phone use data with cellular data turned off?

    I have problems with my iPhone 5 using data on its own. It usually happens at night, with all the apps closed and plugged in to charge (should be connected to my wifi). Recently, I started turning off my cellular data any time I'm at home out of desperation to save my data. Last night, my phone used 6MB of data with my data off, plugged in. I use My Data Manager to track, it matches up with AT&T's record of my data usage, so I'm pretty sure the app is not wrong. I have the 200MB plan, so I have to be very careful and it's incredibly frustrating to wake up and find 6MB gone when cellular data was turned off. Does anyone know what's going on?  I haven't bothered calling Apple or AT&T, I never get anywhere with either one.

    I'm not familiar with My Data Manager but from the name I would think it would tell you what app or apps have used the data and that might help narrow down the problem. If it doesn't have that information, you can go to Settings > Cellular > Use Cellular Data For and that shows usage by each app and if you click on System Services in that list it will also give details of that usage. The numbers are since you last reset the statistics (bottom of that screen). With a little time and detective work you may be able to identify the cause.
    Also, there have been many discussions on various internet forums of AT&T (and other) reporting of the time of data usage not matching the actual time of the use. The usage numbers over a number of days for example are accurate but usage reported at 2AM may actually be a summary of some types of use that happened the previous day.

  • Nokia C5-03/Win7 Bluetooth connectivity problem

    When I am trying to connect Nokia Ovi Suite to my phone using Bluetooth, the pairing process seems to succeed, except the last phase: Then I receive a message that the connection did not succeed. The wizard gives then a possibility to try again with a different ID but it fails every time.
    It is the same problem if I try to pair the phone from computer's Bluetooth icon in the notification area. However, with using my laptop with XP this succeeds. Therefore I believe that my phone is OK but there is something wrong with my Bluetooth software in Win 7 computer. Nokia Ovi Suite lists it:
    - Microsoft (Version: 6.1.7600, subversion: 16385)
    When I start the computer, the Event Viewer shows the following error:
    "The Bluetooth driver expected an HCI event with a certain size but did not receive it."
    Source: BTHUSB
    EventID: 5
    The Microsoft's "Event Log Online Help" onthat window does not suggest anything.
    However, this may be the actual reason for the problems but I do not know how to fix it.
    I have tried Microsoft's "Fix it" tool but it did not fix this problem.
    Any ideas what to do?

    Still the same problem.
    Now I installed the Nokia PC Suite and I tried to make a bluetooth connection to it.
    Everything goes again well except after the last phase when I give the asked pin number in my phone, the computer ponders a while and shows then a window with the text that the phone cannot be verified.

  • Lumia 900 Cellular Connectivity problem (AT&T) aft...

    I've had a Lumia 900 on AT&T for about 5 months and have not had any connection problems.  However, after the Tango update (OS *.8779.*; Firmware: *.12223), when I take my phone into work (which has no cellular reception normally) for an extended time and then take it outside it will sporadically not reconnect to the cell tower.  It will show no connection forever.  If I turn airplane mode on then off or turn off and then on the data connection, which seemed to fix similar problems before, I still get no connection.
    The only solution is to restart my phone.  One time it kind of hung on restart.  The other time the phone froze up when I was trying to turn on/off the data connection.  Restarting brings the cellular connection back. (Almost as if whatever software is controlling the cellular connection is crashing). 
    *I also installed the beta Nokia Counters program after the update -so that may be the problem too?
    Has anyone else experienced this before.  Is it a Tango issue, or a common issue that coincidentally started for me after the update?

    I am having a similar issues with Wifi & cellular connectivity Issues. In addition, am seeing that my Lumia 900's screen is turning black with no response from the power button or any other buttons (bottom buttons will be light though). I have to reset the phone by pressing volume power camera buttons. And one or two times today it had issues restarting cycling the Nokia logo, AT&T logo, then black screen about three to four times before it showed the Windows Phone logo to fully boot up.
    Totally Disappointed. 

  • HT4623 When I try to update IOS 6 to my I Phone using my computer, it keeps saying  This version of iTunes (10.6.1) is the current version.  It won't let me update and I don't have wi fi

    When I try to update IOS 6 to my I Phone using my computer, it keeps saying  This version of iTunes (10.6.1) is the current version.  It won't let me update and I don't have wi fi

    It seems that you try to update iTunes rather than your phone. To update your phone, connect it to your computer, and on the page of your phone in iTunes, you should have a button "check for updates" or something similar.
    More info here: http://support.apple.com/kb/HT4623

  • IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

    Enough is enough.
    I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
    I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
    For the record my case is this:
    I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
    The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
    Here's what I know:
    1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
    2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
    3)There is nothing wrong with the ipod, it works perfectly.
    4) This is not a usb cable physical problem.
    5) The five R's are irrelevant with this situation.
    Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
    6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
    Here's what needs investigating:
    1) There may be a problem with the apple mobile service running on win XP.
    2) There may be a problem with the apple usb driver and win XP or older motherboards.
    3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
    Workaround so you don't go nuts:
    Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
    This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

    I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
    Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
    SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
    This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
    Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
    The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
    It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
    Thanks

Maybe you are looking for

  • Multiple Default Values in a Multi-Select LOV Parameter?

    Hi, I have a report in BI Publisher standalone version 10.1.3.4. The report has a list of values called org_lov. This lov is attached to a multi-selection p_org_code parameter from which it is desirable to also have multiple default values. For examp

  • How do I find and delete old plugins

    Since my leopard days I have been migrating data over as I updraded to the new OSX 10.9. When I start to open apps. Pro tools, Logic x, and otehr DAWs, there are some plug ins that are not compatable. Rather than leave a bug, and taking more time to

  • Horrific Download Speed..will be returning AppleTV to Apple

    Just bought and set-up ATV at home. Updated ATV out of the box to most recent software (??mistake) I have a gigabit wired network. All computers have 10mbs+ download speeds. Rented my first standard def movie. It has taken 2 hours to download 10% of

  • Error while disabling passive mode while connecting

    Hi, I am trying to connect to FTP server, however when I DO NOT check the "Disable passive mode" check box, I am able to connect, but then I am not able to view the files that are directly in the directory. for .eg. if within "MyDir" directory there

  • Strange problem with my X61s

    I updated my video card driver via System Update about 2 weeks ago and ever since I can't seem to play wc3. Each time I start up the game the screen freezes for about a minute and then the game shuts down (sometimes I even get a bluescreen along with