Connecting a playstation 3 to airport extreme

I'm new to the whole wireless thing so please bear with me. I have a number of questions:
Firstly, the only reason why I did go wireless was for my playstation 3 and now I am having problems connecting it the airport extreme. Everytime I go on automatic on the PS3, it does not recognize the airport extreme. What do I need to do? It's also asking me for a SSID?
Secondly, how safe is this? Heard some stories of neighbors leaching on internet connection and what not. If so, whats the best way to prevent this?
Finally, how do i open ports for port forwarding? I used to use a netgear router and all I to do was enter the router ID and then just enter the password and username.
Thanks in advance
20' intel imac Mac OS X (10.4.6) 60GB video ipod (black)

If you are using encryption, make sure the N is set to WPA. WEP will not work. On the PS3, set it to WPA, type in the passphrase and it should connect. I have a PS3 hooked up this way.
For your SSID, make sure the N is broadcasting the SSID and it is not "hidden from view". Many devices like seeing the SSID in the clear. I know, this is not considered the most secure way of doing this, but with strong encryption enabled and MAC filtering, you should be OK. I live in a neighborhood with a number of other wireless networks and have never had a problem with this setup.
Port forwarding is another issue. I do not remember seeing this feature in the N. My setup still uses the Netgear router and the N is plugged into it. The router does the NAT translation, error logging, firewall duties and port forwarding, the N handles everything else. My daughter still plays her online games just fine.
Jeff

Similar Messages

How to connect a hard drive on Airport Extreme (second edition)

how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

The USB port your Mac is high powered. The port on the AirPort Extreme is not.
So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

HT4262 How can I connect 6 computers simultaneously to Airport extreme?

I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

Matt
Is it possible to speak on the phone? The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem. After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
Thanks
David

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ?

How do I get rid of the error message "There was an error connecting to the server “Office AirPort Extreme” ? This message shows up 3 times when I boot my iMac.

I do have a USB hard drive hooked up to the Airport. I've never created an AppleScript for it. Should I disconnect the USB drive and see if I still get the error message?
Thanks for your reply!

Connecting Time Capsule wirelessly to Airport Extreme

Hello,
I have just purchased a Time Capsule v7.3.1. I am trying to have my Airport Extreme connect wirelessly to my Time Capsule and then use the ethernet connection "wired" to my Xbox. I am unable to get an ethernet address that works when connected via ethernet. I had two Airport extreme's previously connected via wireless and had my Xbox connected via Ethernet on my one Extreme and things worked fine. It seems that my Time Capsule when connected via wireless to my Airport Extreme isn't getting a valid ethernet DHCP address and I cannot get it to work. When I use the wireless connection on my Airport Extreme it seems to work fine when I access the wireless connection to the Airport Extreme. However, wired does not.. Time Capsule

your secondary router should be placed using the manual button once Airport Utility is launched in "bridge" mode. then configure your ethernet and wireless.

Windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

Using ARD remotely connecting to work computer with Airport Extreme...

So I've looked through the forums, over the interwebs, through the ARD PDF manuals online and I'm coming up short. Ugh.
I want to connect from my home laptop to my desktop at my small business where we're using an Airport Extreme for a router. I can NOT figure out how to get this configured to work. We use ARD within the business, so on the same network, no problems. With the router, I'm guessing I need to get the computer setup to have a locked in IP and whatnot but no where can I find the instructions that tell me EVERTHING I need to do. Can someone here point me in the right direction please or hit me over the head with a 2x4 of exact instructions!
Thanks for your time! Shawn

Hi Shawn,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, goto http://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

Problems connecting multiple macs to an Airport Extreme network.

I think this problem is similar to a previous post, but is individual in some ways.
I have 2 Airport Extreme basestations covering a large flat connected by Ethernet extending a single network. I did try to extend the network wirelessly, but this was plagued with problems where the network would work for 10 mins, then drop out as I think the basestations are slightly too far apart.
Connected to the network are a number of machines:
Wirelessly we have 3x iPhones, 1x G4 Cube, 1x iMac (current model), 2x MacBook Pro (previous model) & 1x PC.
Wired via a hub is an Apple TV, PS3, Nintendo Wii, Denon Home Cinema Amp, PS2
For aprox 6 months I have had major problems connecting all the wireless machines at the same time. I have played around with the security as per previous posts with varying degrees of success.
I seem to have the most problems with the iMac. The iMac will not join the network when there is any form of wireless security. Every time I try to set up a password it hangs when trying to join and I finally get the "There was a error joining xxxx network".
After more playing around I managed to get all the machines working by having no security on the network and locking the network down by MAC addresses.
Since last Thursday I now have a new problem. The iMac joins and stays on the network perfectly, but the second my second MacBook Pro is switched on and joins the network, the internet connection on the iMac drops out. In addition, as we use the iMac as a media server, all other machines connected to the iMac for either file sharing or iTunes sharing then get the error "the remote machine is failing to respond. Please check firewall settings if there are any". What is strange is that the iMac remains on the network, full signal, independent IP address and the second the MacBook Pro is switched off, works perfectly again.
I have tried wiping both the iMac & the MacBook Pro and re-installing their operating systems, but this only solves the problem for aprox 24 hours then all of a sudden the issue re-appears.
Can anyone out there help?

Let's double-check the AirPort Express Base Station's (AX) settings ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, check the following settings:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing AEBSn's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

How to connect a ADSL router to AirPort Extreme?

Hallo,
my local internet service provider forces all costumers to use their modem/router to connect to the Internet using a DSL connection.
I have one external public IP (v4) and the router has an editable IP for the LAN set to 192.168.1.1 .
The ISP router can act as DHCP server and NAT; I can disable the DHCP.
What I would like to do is connect it to the Airport Extreme WAN port and give all the control to the Airport extreme: I want to use his DHCP server, NAT, port forwarding etc.
My problem is that I am able to have Internet connection only if the ISP router has DHCP control and Airport Extreme is set to Bridge mode.
In this configuration, in the Airport Internet configuration panel, the connection is set to Ethernet, IPv4 is using DHCP, Airport IP is 192.168.1.133 and the ISP router has 192.168.1.1 . I also have the DNS IPs set to the ones suggested by the ISP and Bridge mode.
In this way it works: all computers can share Internet connection.
What I am trying to do is:
- disable DHCP in the ISP router;
- in the Airport extreme Internet panel I choose to manually setup IPv4 and I type the same vales it is getting when set to DHCP mode: 192.168.1.133 for the Base and 192.168.1.1 for the router using the ISP dns and I select Share pubblic IP. In the DHCP panel I choose 10.0.1 class.
I save changes and... I got that Internet is no working anymore and I cannot access the ISP router control panel.
Does anybody have suggestion about things to try to not use ISP router DHCP or configuration changes I could try?
Thanks in advance for any help about it!

Thanks for the reply,
at the end it seems that my airport extreme works too BUT with an error message saying "double NAT" and the front led turned to yellow. I have ignored such error because things seems to work and so the led color goes to green.
What I had to do here is:
- set previous router to IP 192.168.1.1
- turn off DHCP on my previous router;
- leave on the NAPT (NAT) service on previous router and set it with start and stop address to the same IP I am using for the Airport Extreme (192.168.1.100);
- open all ports and services on previous router by faking the mac address of the Computer's NIC I was using to configure router. I say faking because previous router wants to know for which computer the ports have to be open, so I had to use the same mac address of the Airport extreme. I cannot type it, previous router will get it automatically when configuring it.
- on the Airport Extreme, Internet side, I had to manually configure Internet options using Ethernet mode: I set the IP 192.168.1.100 for the Airport base. Then I have enabled DHCP on class 10.0.1.x .
Airport extreme seems to work with all features now, I hope that "double NAT" warning will not create any trouble. Anybody knows about that?

How to connect a Philips fidelio to airport extreme?

I just purchased an Airport Extreme Time capsule. I cannot connect my Philips fidelio AD7000W to the network. There are no WPS button on the Airport Extreme. There is a WPS printer connection option in the Aiport app menu option but nothing for sound system. Anyone knows how to make the connection ?

Instructions on how to connect the Fidelio to a non-WPS supported router is covered in the User Guide starting on page 13. On step 4 you would enter the specifics for your wireless network. That would be the network name, the wireless security type & wireless password. You will also want to choose the DHCP mode as enabled for these speakers.

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

Mac Book pro can't connect to Internet through Apple airport extreme base station

I had problems connecting to the internet in the past with my macbook pro. One day it suddenly started working again but then I bought a second apple TV I lost connectivity. I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet. When I hooked up the new Apple TV that I bought it booted my computer from it's ip address. The apple TV though wouldn't work and now nor would my computer. I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not. Even if I plug in the ethernet cable from the base station it doesn't work. It show that it has a self assigned IP address. After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet. If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine). When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router. I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet. Can you please help me trouble shoot this?
I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

It has something to do with the connection from the base station to my computer
I don't think so..
I just posted a reply which totally vanished.. strange strange website now.
Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
Please tell us what modem you use.. is it a router??
If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
You need to also give us the screenshot of the IP you are getting in a computer that works.
EDIT
Sorry this is half double post.. the previous page refused to display.. now it has returned..

Only one device will connect to wifi via my airport Extreme

The power went off at our house recently. Since then I have been unable to connect more than one device via my airport extreme. I have tried unplugging and resetting both modem and router repeatedly. It would switch between laptops, allowing one to be connected while saying the other had no connection and to reset the router/modem. I have tried reconfiguring the airport express (a couple of times). I have tried resetting the network settings on my iphone5. I have restored the factory settings on my iphone5... On my iphone5 the Airport Utility cannot locate the Airport Extreme. It says no base stations have been found.
My husbands android mobile also cannot connect to wifi (which it previously could).
Help please!

So it seems a night of rest has done everything a world of good! I just turned on the second lap top, it connected to the wifi. Then with bated breath tried the iphone5 and it connected too. So, seems that the resets I did yesterday did do the trick, just things needed to be shut down and restarted again. Yay!

Connecting a playstation 3 to airport extreme

Similar Messages

Maybe you are looking for