Connecting a projector to TouchSmart 300

Hi,
Does anyone know how to redirect the display through the USB port of a TochSmart 300 to a projector?
Thank you
WK

White-Knight wrote:
Hi,
Does anyone know how to redirect the display through the USB port of a TochSmart 300 to a projector?
Thank you
WK
Windows 7:
Press Windows Key and P. A windows should pop up, keep these keys pressed and press P until it is chosen.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Similar Messages

Tuner not working on my TouchSmart 300

Situation: Brand new TouchSmart with tuner not working out of the box.
Driver appears to be installed and working, but tuner will not pick up any channels.
Both ATSC(antenna) and NTSC(converter box used) were scanned and nothing picked up in either mode.
Both LiveTV and Media Center give same results.
HP will be picking it up to be serviced. I'm wondering if it's a Window7 Home Premium 64 bit and driver issue?
I suppose it could be a bad card.
Driver was uninstalled and reinstalled - did not work
OS was reinstalled (online chat said that reinstall fixes 5 of 10 computers with this problem)
Computer: HP TouchSmart 300 - 1000z
Driver: AVerMedia A323 MiniCard Hybrid ATSC version 1.1.64.46
OS: Windows 7 Home Premium
Any ideas? I really like the computer, I really don't want to deal with the hassle of shipping and setup again.
Thanks

This seems like a possible problem with the device access point settings. Are other applications able to connect to internet, for example browser?
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

Cannot play the video in powerpoint when connected to projector

i have linked a video into a powerpoint slide... it played perfectly on the screen. but when connected to projector it cannot be played.
i am using a macbook pro with Lion OS.
Thanks!

I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
Here what I figured out so far:
1. It happens when you have PPT open and connect to beamer afterwards
2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
So in short: Connect to beamer first, then launch PPT
I know it is only a symptom fix but it worked for me

New TouchSmart 300 internet is very slow

I have a new touchsmart 300 that hasn't been in use for more than a day. i've updated windows and hp software. the internet is incredibly slow and i don't know why. another computer runs fine on the same internet connection. any suggestions? thanks!

tylerdurden8us wrote:
I have a new touchsmart 300 that hasn't been in use for more than a day. i've updated windows and hp software. the internet is incredibly slow and i don't know why. another computer runs fine on the same internet connection. any suggestions? thanks!
Try moving the computer closer to the router or plugging in an ethernet,
also try Updating and reinstalling the network driver.
Check for viruses too, MBAM Home Page
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

Can i hook a wii console to an hp touchsmart 300

can I hook a wii console to an hp touchsmart 300?

Hi Carolb6455,
I understand you are looking to hook your WII up to your HP Touchsmart 300. Here is a document on connections and what they do. I would consider HP Display Port to VGA Adapter.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02034609&cc=us&dlc=en&lc=en&product=5330114&tmp...
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Touchsmart 300 random black screen

What would cause an HP Touchsmart 300-1223 to randomly display a pure black screen, no audible beeps or other error indicators. It could be anywhere from hours of usage to ten minutes of usage for this to happen. Whenever the screen randomly goes black the keyboard and mouse "lose-power" as in when they are connected you can visibly see the light under the mouse and on the keyboard, but when the screen goes black the lights go out and everything is unresponsive. Possibly an overheating issue that could be fixed by applying new thermal paste? However, the PC doesn't seem to be overheating at all, it's actually running at a fairly low temperature. I don't see how it could be bad drivers or anything of that sort, as I'm running a clean fresh install of Windows 7. I've updated the bios, graphics, and touchscren drivers on the HP touchsmart 300-1223 driver page in case those were the cause and this is still happening An extemely easy way to duplicate this happening is to simply run a virtual machince (virtualbox, etc) and when trying to load the virtual machine it will cause the black screen. In case these are at all related.

Hello MikkiM,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that one of your Windows profiles as lost its desktop icons, pictures and documents, and I would be happy to guide you towards a resolution! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
In the meantime, I recommend following this document on how to Fix a corrupted user profile. This should help repair the user profile that has lost its data.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Getting a hp mce remote for touchsmart 300-1125

I want to add a remote control to my HP Touchsmart 300-1125 and am thinking to order the 5070-5600 HP remote (random link: http://cgi.ebay.com/HP-COMPAQ-5070-5600-Media-Center-Remote-Control-/330414657906#ht_805wt_911).
I wonder about two things:
1) The IR Receiver *is* built-in, isn't it? (Device Manager lists a functional eHome IR device)
If in doubt, where should I look for the IR receiver sensor on the case?
2) I think the 5070-5600 remote lists as being made for the older IQ series of Touchsmarts. Will it work with the newer 300 series?
Thanks
Mike
This question was solved.
View Solution.

All MCE remotes from the past 8 years send out the same codes. There are a few newer HP specific codes, but 95% of the buttons are exactly the same, grab a 5 year old Gateway MCE remote, it'll work just the same as a new HP one!

How to install clean win 7 32 bit in touchsmart 300

Hello, i buyed touchsmart 300 for work in add multitouch feature to my software MonoTouchLive
I own windows 7 ultimate 100% legally and i do clean instalation, i not really interested in all tools and softare provided by HP, really good pkg, but i really like clean install.
Im very suprised when after try installl widnows 7 ultima, system freeze with BSOD screen due some comflict and installation die.
Its not possible install win7 32 bit on touchsmart 300 due some conflict, i researcha little and discover way to install windows 7 without trouble:
Step 1, With the Windows 7 DVD in your DVD drive press any key when promped @ 'Press any key to boot from CD / DVD...', as soon as the message is gone, quickly press F8 to show the boot options list. Select Safe Mode and install 7. It will allow the initial stages & file copying.
Step 2, When 7 restarts for the first time, press F8 and select 'safe mode'. A dialog box will appear stating that windows cannot continue in safe mode 'ok' to restart.
WARNING don press ok !!!
read step 3
Step 3, press SHIFT+F10 to open the command prompt and direct youself to x:\windows\system32
Code:
cd\windows
cd system32
then type CompMgmtLauncher (it takes a few seconds to load) you can then access device manager from this console.
Step 4, Select DEVICE MANAGER , and disable all yellow devices is the offending hardware & choose to disable it. JUST LEAVE ENABLE NETWORK ADAPTERS !
Close command window and click ok on the dialog box. Windows will use a standard driver (with less funtionality) when it restarts.
Once installation has finished enabel windows update, taht isntall video drivers and others, the go to device manager and select yelow device drivers, make right lick select update driver.
That fix and isntall missing drivers !! : )
Hoppe this help !
This is usefull for windows 7 32 bits.
I tested with windows 64 and install perfectly without troubles !!
After clean install, this devices not work at 100% ot just not work:
Brighnes display selector not work correctly:
Only can setup bright from POWER OPTIONS ---> change plan settings
Then move the bright slider and press save changes, and newe bright value is configured.
The control volumen buttons in the left of the machine not work, i dontreally use so i not find how fix, probably somebody form HP can inform hoy fix this.
Sorry for my bad english, my native language is spanish !
Best regards !

Hi Guys,
I have the solution to your problems and I will go ahead an explain it in detail so that no questions will be raised.
I have struggled to get WINDOWS 7 (32BIT) to run on the Touchsmart 300 PC now for three days (and nights) but I know how you can do it.
The problem lies within the VGA Adapter (Graphics Card) this little buddy has incompatible drivers with the inbuilt functions of the Touchsmart PC in its generic (Windows Preloaded) form. Therefore what you can do is the this.
Step 1: Insert Windows 7 (32Bit) disk and start the setup process and follow it until it hits the problem. (Millisecond of Bluescreen)
Step 2: Once the PC starts booting repeatedly press F8 (I mean it just keep on pressing that button until you can select "Safe Mode")
Step3: Once Windows Setup screen is back it will tell you an error! Which is good. INSTEAD of pressing "OK" (to restart) press SHIFT + F10 (opens the command prompt)
Step4: You should automatically be in \Windows\System32 now enter the following command: CompMgmtLauncher (This is the Device Manager).
(If the default directory is not System32 the navigate to it by entering "cd windows" and "cd system 32" (cd = change directory)
Step5: In the Device Manager (do not worry it will take some time to load) select navigate to "Display Adapters" - "ATI Radeon ..." RIGHT-CLICK on it and choose disable. (To be sure Windows will not have any other troubles you should do the same for all highlighted devices. the once with the yellow triangle)
Step6: Once this is done restart your system and let the install run into the normal mode and finish the install.
Step7: Once Windows starts for the first time. Use the provided ATI Radeon Driver from HP (NOT the original one) from the support download website to install the correct driver.
Step8: Resart and enjoy!
Hope this helps and let me say to AMD/ATI yopu guys really suck at your one product drivers!
Cheers and Out.

Touchsmart 300 - Install Windows 7 32 bit

Given I have a Microsoft Windows 7 Professional 32 bit DVD and the required license, how can I install Windows 7 Professional 32 bit on a Touchsmart 300 PC?
If I launch the installation booting from the DVD I get a blue screen (BSOD), I presume for a driver issue.
I am considering using Microsoft AIK to customize the setup, but I need to know which drivers I should include and how to get them.
Is there any information available?
Regards
Mario

Hello Zooey,
Please try to follow this HP document and see if you can resolve your problem.
CD/DVD Drive Is Not Detected (Windows 7)
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03164799&cc=us&dlc=en&lc=en#N456
Let me know if this does not work or even if it does as well!
Thanks,
I work for HP! Please remember to provide and if this helped click ON

MacBook Air connected to projector won't display dvd in superdrive, but plays on macBook Air screen.

MacBook Air connected to projector won't display the dvd in the superdrive, but it is playing on the MacBook Air screen.
When dvd is ejected, MB A screen appears on the big screen through the projector. What do I need to do to get the training dvd showing on the screen?
Thanks

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Uncheck “Auto Proxy Discovery”.
Click OK, Apply.

I can not connect to projector using Thunderbolt to VGA adapter

When booting on Windows 7 using Boot Camp I am not able to connect to projector. I have a Thunderbolt to VGA adapter. It works fine when booting on Mac OS. Do i need to update any drivers or am i using wrong adapter? I have Boot Camp version 4.0.

If this is you home wifi try resetting the router. Turn if off at the wall wait a minute and turn it back on. Are you sure you have the right password?

Problem connecting to projectors

With all versions of Mac OS X that I can remember, it has been a breeze to connect to projectors. Everytime I connected to one, I got a decent image right away. Sometimes I was able to get a higher resolution after that first successful connection, but even the first setting was acceptable.
Since upgrading to Snow Leopard, results are much more erratic. I connected without problem at a recent conference, but most projectors at my workplace give me difficulties even though I connected to the same projectors without a hiccup before Snow Leopard. Usually the projector says "no signal" and it does not matter if I connect before or after turning the projector on (something I never even worried about before).
Today I had to use one of our projectors and the only way I could get it to work was to select mirroring (goodbye the nice Keynote's presenter's screen) with a resolution of 1024x768 at 60 or 70 Hz. Disabling mirroring or changing resolutions or chosing higher frequencies resulted in a "Signal not compatible" message. This is really annoying. I don't remember having done anything with my settings that could cause this.
Anyone else encountered this or has a solution to offer?
Thanks in advance,
Denis

Using Keynote run, Snow Leopard puts slideshow and presenter screen on wrong monitors, so i get the presenter on the projector/external monitor. Works like a dream on Leopard with same file, never had a problem with Keynote before. Cannot find a way to set the screens right, application crashes if I move the edit window to presentation and try to run from there. This must be a bug that needs to be fixed - urgent- I have a presentation to do on April 12, bought a Macbook pro to avoid having to carry along my old Imac24 which never ever caused me a problem.

HT2494 how to connect a projector

how to connect a projector?

What Mac do you have?
For most, you are going to need some sort of adaptor. This could be a Mini DisplayPort to DVI or MiniDisplay Port to VGA, depending on what input the projector supports.

Connecting with projector

Hello! I hope someone can help me with the problem..
I am trying to connect my IMAC G5 with a video projector.
I have been doing this for years with i book G4, using video adaptor,
and it has always worked.
This time, however, when I connect the projector with my IMAC,
(the 17 inch) the resolution changes to 1024-640, thus the image on the screen
get "swollen"..
Even if I try to change the resolution in the system preference panel,
(Display window), it just doesn't work out; if I change it to 1670 resolution
as it should be, the image becomes "smaller" with a black frame around it.
(In this case, the swollen image gets slim as before.)
I had doubt that the video adaptor is not the right one.
(According to the guy in the computer shop in Turin, it is Mini-VGA
and it should work out OK likewise with Imac G5)
I tried with a computer adaptor, too, that came with Ibook, but it is the same.
The Mac technical assistance says that there is something wrong with my IMAC and I should take it to the repair.
Is it really only the solution? or is there something else that I can try?
Thank you grazie..
minobu

Hi, did you get this solved. We also you ProPresenter. I am not sure why you mirrored the screen to get a DVD to play? PP supports DVD playback (unless your using an older version that doesnt have this feature??). Or you can drag the DVD window to the projector display.
Did you deselect mirror image? because you wont have any arrangement options available, you wouldn’t need them.

Should i plug my hp touchsmart 300 straight in to wall outlet or into surge protector?

should i plug my hp touchsmart 300 straight in to wall outlet or into surge protector?

It will work either way. The downside of the wall outlet is that if there is a strong enough spike your electronics may be damaged. I have always used a UPS which will not only protect against surges but also will power your computer during a power failure.
It really comes down to how much risk you feel comfortable with.

Connecting a projector to TouchSmart 300

Similar Messages

Maybe you are looking for