Connecting a SAP-ERP-System to ADS-Server

Hi all,
I'm facing a problem while I'm trying to connect our ERP-Sandbox to an ADS-System by SSL (HTTPS).
I already connected it by HTTP successfully, so it pricipally should work. Also DEV, QAS and PRD-Systems are connected to the ADS by http and https and they are working fine.
The sandbox connection only works with http, not with https. I did the following steps to connect the sandbox to the ADS:
create User ADS_AGENT in ERP-Sanbox (with roles "SAP_BC_FPADS_ICF" and "SAP_BC_FP_ICF")
created Role ADSCALLERS in ERP-Sanbox and assigned it to User ADS_AGENT
created RFC-Connection "ADS_SSL" in SM59 with Type "G" (connectiontest is fine)
created connection/Destination "FP_ICF_DATA_SID_SSL" on ADS-Server. Authentication is basic (by username and password)
STRUST is also "green"
Usually the connection should work now.
But if I try to test the connection in SE38 by one of the following programs
FP_PDF_TEST_00
FP_CHECK_DESTINATION_SERVICE
FP_TEST_00
I alway get the same error:
SYSTEM ERROR: Fehler SOAP Framework: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /Authentication failed. For details see log entry logID=[No log created, because category "/System/Security/WS" not active] in security log./<yq1:com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt xmlns:yq1="http://sap-j2ee-engine/error">Authentication failed. For details see log entry logID=[No log created, because category "/System/Security/WS" not active] in security log.</yq1:com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt>(100.102).
Although the trace/log on /System/Security/WS is active (I checked this twice at least and also restartet the ADS) we get no logs or entries here.
Also ICM-trace gives any error
It would be great if anyone has an idea. Thank you in advance.
Florian

Hi Florian,
Similar problem got resolved by changing the HTTPS to HTTP. Is that an option for you.
ADS with SOAP error
Also check the authorisation of ADS user
http://help.sap.com/saphelp_nw70/helpdata/en/7f/65eba6ac324d28b477390262a87ab2/frameset.htm
Refer SAP note 944221.
Regards
Sandy

Similar Messages

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
 SQL Code: 4008
 POS(1) Unknown user name/password combination
 For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

RSA1 DB Connection from SAP BW to external SQL Server databas.

Hello,
I am trying to connect our SAP BW system with SQL Server Source System through DB Connect in transaction RSA1.
Our BW system is running on Windows and MaxDB platform, therefore have I already added the latest dbmssslib.dll library to the kernel for SQL Server.
But the connection does not work anyhow, I recieve the error "Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does > exist or access denied." and I am quite sure that my input parameters are correct.
Therefore I wonder if someone has run into a similar problem and what the problem could be?
Best Regards,
Niklas Sandstedt

Hi,
I am sorry that my case was assigned to wrong forum.
That should now have been corrected, however my problem still remains unsolved in one of our systems.
I found note 178949, which fixed the problem in one system. But even though the system setup seems to be identical, the two systems appears different.
The following has been done for both systems:
1. Upgraded kernel to 701 version 111 and added dbmssslib.dll and dbmssslib.pdb files
2. Created Logical system in BD54.
3. Tried to create DB connection in transaction DBACOCKPIT.
In the third step, the setup fails and I receive the following error message when I test the connection:
Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not > exist or access denied.
Database error -1
All profile parameters AL11-directories also seems to be correct in both systems, so both should find the dbmssslib.dll file.
One issue that I see is in DBACOCKPIT, the checkbox for "SAP Systems with basis release" is unchangeble and marked. This however, I think was changed in the other system automatically when the connection was established successfully.
Has anyone run into the same problem?
Best Regards,
Niklas Sandstedt

Business Objects XI 3.0/3.1- Connection with SAP ERP not with BW

Hi all members,
I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP.
My client does not have SAP Business Warehouse. Neither they are interested to have SAP BW.
So, I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP ?
Any other thing i have to go for?
Kindly any member guide me in bit detail.
Thanks and Best Regards,
Izhar

Hi,
currently it is not possible to build web intelligence reports fetching data directly from an SAP ERP system. The reason is that SAP ERP data sources are not supported in universes.
Regards,
Stratos
PS: An option is to deploy a BOBJ rapid mart. Please note that in this case you require the BOBJ Data services (ETL) tools. The idea behind the SAP ERP related rapid marts is that in the first step the data are extracted from your SAP ERP sources and load them into a relational database (using a predifined DWH scheme). Additionally the package provides you with universes (which rely on this predefined DWH scheme) and use the database as data sources, here your SAP ERP data were extracted to.

How to analyse the main memory usage in SAP ERP systems?

Dear expert,
I'm doing a research work about analysing the main memory usage in SAP ERP systems.
I would like to find out what is load in buffers and when. That means, which process have the control of these memories and which are always performing something, tables loaded, and so on. Becuase I tried to isolate the space needed by a simple webservice call (create one material) in my test system, but even after a $SYN there are something stored in the buffers. I use a BAPI to avoid the execution of the SAPGUI and its repercussion in the system (I know the BAPI called uses resources too, but when I run this BAPI to get the statistics, it's like ST02, I get different values). Could someone help me or recommend something specific to read? Thanks a lot in advance.

Dear expert,
Thanks a lot for your answer. The point is now that I want to isolate the memory used by a webservice that I call, I mean, I would like to know how many memory is this webservice using in each buffer. And could you tell me where could I read something about the order that things happen in SAP System when a webservice is called (always memory related), that's which steps are done to store data in buffers and so on. Thanks in advance.

Need suggestion on importing BC SET : UKM_DCD_CUST in SAP ERP system

Dear Gurus,
Client wants me to import BC SET : UKM_DCD_CUST into SAP ERP system. I have found BC SET : UKM_DCD_CUST in T code SCPR20.
I have read most of the SCN discussion and got two way to import BC SET into ERP system as given below. But I need the appropriate way to do this. Can any one help me in this?
1. SCPR20 -> Activate BC set -> create customizing request to import into another system as per link :Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
2. Create TR in SE01 in 000 and import into required client as per below proc:
Usual procedure
1) BC SETS will be attached to SAP note usually. Download it and unzip it , you will get a *.bcs file
2) Call transaction SCPR20  BC set --> Upload In the dialog box that then appears, specify the files that you unpacked
Import the set BC into a package that you have defined. activate it with the "Expert mode"
3) You will also get a *.txt file with prog id , obj etc entries , then you have to go to SE09 and create a transport request in the source client of your Solution Manager system (client 000). Open the *.txt and copy the entries it contains into the transport request. Use transaction SCC1 to import the data in your Solution Manager client(s)
Thanks,
Anand Aseri

2). Client copies bring the Customization data but not WorkBench . So you might have to do transport of copies from Old Dev to >New Dev.
So you are saying that the system copy from Production will not bring Workbench data and I need to bring Workbench data by transports?
*system copy from Production will bring Workbench data also, but when you do client copy from development system again on top of client which already has production customization, data and workbench requests, Production customization and data will be overwritten from development customization and data (it depends on the profile you choose for the client copy) *
However Development Workbench requests are more and also has ongoing development work which might not be available in production client and those (Ongoing development workbench requests) you need to import in new system as transport of copies after the client copy
3). If you do system copy from Production and do client copy from dev...obviously Prod customization will be overwritten with Dev rite ?
That's what I expect to happen,
Ok, however, You might need to get Development Work too from the old dev system and don't forget about setting up of partner profiles in WE20.
It's just a thought , Do you have testing client in Dev, if not,You can leave the production client in development system and use it as testing client.
Create new client which is client copy of Old Dev and import WorkBench requests *
Thanks,
Arjun

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

PI Integration between SAP ERP system and Cloud for Customer

Hi,
We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
Could anyone let us know what are we missing here, so that we can get the message types.
Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
Please let me know how to debug such a scenario.
Regards,
Sangeeta

Hi Vatsav,
Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
Customer Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
Customer Address Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
Customer Contact Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
Regards,
Sangeeta

Integrating SAP-ERP system to SAP-SCM system via SAP-XI

Hi All,
My requirement is to make a scenario for Integrating SAP-ERP system to SAP-SCM system via SAP-XI,Sender side is IDOC Adapter and Receiver side is Proxy.As iam not aware of the scenario procedure can any body could explain briefly step-by-step on this.
Thanks in Advance.
ram

Hi,
Sender is IDOC so no need to take any communication channel & sender agreement in ID window.
Find below link of more information on IDOC configuration
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
Proxy Configuration
File to R/3 via ABAP Proxy

Want to do PhD in SAP /ERP System / Managment Information System

I want to Full time PhD in SAP / ERP System / Management Information System in SAP Related Area with scholarships.I have done Master of technology in Information technology from Jadavpur University ( india).I have 2 years I.T experience in I.T and Academics if you can give any helpful information on that I will be grateful to you.
Thanks
Sayanta Mallick

Hello,
As an active UA member, we are interested in supervising PhD students in SAP related areas (Business Intelligence in my own case). Please be aware that, as a student, your PhD would need to have a focus on the challenges and issues in the area (many are noted in both the threads on the Community Network) and not on SAP technology per se - though you may well use SAP technology or additions to it to develop/demonstrate solutions to issues and challenges.
We offer full and part-time study options and details can be found at the following URL:
http://www.brunel.ac.uk/about/acad/siscm/disc/pg/phd
I do not mean to use this as an advert for my institution in particular - as noted in other posts there are many choices open to you.
Mark Lycett
Professor of Information Systems Development
School of Information Systems, Computing and Mathematics
Brunel University, UK.

Generate PI alerts for Runtime exceptions in other SAP ERP system

Hi All
We usually get alerts in PI Alert inbox.
For some specific interfaces, we will need to raise an alert to other SAP ERP system user.
Is there anyway generating this kind of exception?
Thanks
Sai
Edited by: Sai Krishna on Jun 30, 2008 3:08 PM

Hi Sai,
There are 3 ways you can do this.
1) Like VJ said "sending an Email using mail adapter from with in a BPM" Which will be a little complex and preformance wise may be slow but sounds neat .
2) Use the Work Flow WS71000002 ( AlertSendWf ) to capture and trigger a RFC or a Mail to the concern system
For this you will require the services of a Workflow guy; but this will be fast and recommended if the error are being caught in a SAP to SAP landscape
3) You can use this link to generate a group email this is what I have implemented in our landscape
http://sapdocs.info/wp-content/uploads/2009/01/alert-configuration-in-xi.pdf
Regards
Gagan
Edited by: GAGAN S. KASANA on Mar 2, 2010 5:17 PM
Edited by: GAGAN S. KASANA on Mar 2, 2010 5:17 PM

Connection between portal (KM system) and external server.

Hello All,
I need to establish connection between portal (KM system) and external server. At external server, IIS and WebDAV are configured.
So for this reason, I have created an HTTP system and a webDAV repository manager at portal, but not able to connect to the external system.
I have created a webDAV template, but not able see it under KM systems to create a webDAV system, I have even restarted the portal, still no use
Please suggest, any prerequisites need to be done?
Thanks
sk

Hello Supraja.
Yes, ofcourse i already followed the doc.... In the 20th page of the doc, it is said the portal needs to be started, for the WebDAV template to be seen. to go head and creat a WebDAV system under KM systems.
But even after restarting the portal, I cant find the already created WebDAV template. Any guess to reslove it...
A quick response it appreciated.
regards-
sk

Curiosity about the level of load on SAP ERP systems

Hello all,
In my company, I'm in charge of the SAP capacity planning and so, every month, I fill several Excel sheets to follow the load of our systems.
I am curious to know if our load is similar to that of other SAP ERP customers.
I would be happy if some of you would like to post their monthly load statistics for R/3 or ECC systems.
Of course, I begin :
Production R/3 4.7 ext2 system, main modules SD and MM.
460 declared users, average 110 concurrent users
1 Win 2003 MSCS itanium cluster with 5 win 2000 32 bit app servers.
stats for November :
Thousands of steps
TOTAL :            22 500
Dialog :                 797
Background :        459
RFC :                4 439
UPD and UP2 : 14 418
HTTP :                  523
Average dialog step response time : 548 ms
Database size : 1.1 To
The load evolution of the system is
always increasing
stable for dialog steps (sapgui)
more and more external RFC calls
more and more web services calls
The system is less and less a transactional system and more and more a backoffice system executing services calls.
Thanks to all who will be interested to share this load information.
Regards,
Olivier

We are a manufacturing company and we have a lot of batch processing (MRP et al).
Yes - the systems are pretty big
DB-Server/CI: 4 x DualCore Opteron - 48 GB Memory (ENQ, BTC)
AppServer: 4 x Opteron 48 GB Memory
From a technical point of view we wouldn´t need the application server, the DB server could handle that load too.
The main requirement we have is, that the avg. reponse time in VA01 for each line item is below 450 ms everywhere on the world (China, Poland, Russia) on those remote locations - the system is in Germany - so we are trying to make sure, that the main time consumed on the box itself is rather small because of not always reliant network connections to the east part of the world (actually VPN). 1/3 - 1/2 of the actual avg. reponse time is consumed for network transmission.
On top of that we have about 550 printers defined because we print everything, that is related to the business process out of this SAP system which will also consume quite a bit of network speed/bandwith.
Our users are pretty much "regaled" with response time, on days, where the avg. time is increasing 100 ms, we get a LOT of calls because of a slow system. The benchmark assumed 2 seconds are unacceptable for our users thus it may appear, that the boxes are oversized but we need that power to ensure the speed.
Markus

Error sending IDOC from external Java application to Sap ERP system

Hi Experts!
When I try to send Idoc from Java application to XI an error occurs : no service for system CLNTJAVA, client in Integration Server.
My question is: What value the setSenderPort() is excepting?The Java third party business system's logical name or the ERP business system's logical name where the JCO can be found?I tried both of them, but still have the problem.
Please help. I read all threads about this error, but non of those can help me.
My relevant java sourcecode:
doc.setSenderPort("CLNTJAVA");
The XI documentation says that:In the case of non-SAP senders, the entry in the SNDPOR field is interpreted as a logical system name, and the corresponding business system is searched for in the runtime cache.
Both case(third party business sytem and erp business system) I have configured the ID i think correctly. I made a business systems,I configured the adapter specific identifies,I made the IDX1 port,I made the RFC destination,I polled the IDOC type with IDX2 transaction, I have made full cache refresh,I configured the INTEGRATION_DIRECTORY_HMI rfc destination,but I do not made any communication channels, receiver determinations, receiver agreement.
My configurations if it can help for you.
Hostname:sapsp5
System name: NE2
Clients:
000 ERP
001 Integration Server
SLD configurations:
Third Party Technical system name: Java_sytem
Business System:CLNTJAVA
Logical system name: CLNTJAVA
ID configurations:
Business System:CLNTJAVA
adapter-specific identifiers:logical system:CLNTJAVA, the rest is initial,because I cant change it.
IDX1 port name: CLNTJAVA the client is 001. the rfc destination is client_001.
I think the IDX1 port and the adapter specific identifiers are wrong. is it?
my java source if the sender is the JCO
doc.setSenderPort("INTSERV");
My configurations if the sender is the JCO.
SLD configurations:
Technical system name: NE2
Business System:INTEGRATION_SERVER_NE2
Logical system name: INTSERV
ID configurations:
Business System:INTEGRATION_SERVER_NE2
adapter-specific identifiers:logical system:INTSERV,system NE2,client 001.
IDX1 port name: INTSERV the client is 001. the rfc destination is client_001.
Could this error be an autorization error?I tired to connect to the xi from the Java, with the user PIISUSER extended with PISUPER roles.
Thank very much.

Hi!
My SNDPOR already set to my source business system's logical name if you check my configurations(JAVACLNT), so there is another problem unfortunately. I set SNDPRN to JAVA, but it still does not work.
Check this configuration please(posted here:
No service for system ... in Integration Directory)
doc.setMessageType("ACC_DOCUMENT");
doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
doc.setRecipientPartnerType("LS");
doc.setRecipientPartnerNumber("SE1CLNT500");
doc.setSenderPort("SAP3MA");
doc.setSenderPartnerType("LS");
doc.setSenderPartnerNumber("TREMACLNT");
doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
I guess that your idx1 port name is the same as the SNDPOR value. I think it should be, because the XI is whatching the IDOC traffic in the idoc adapter port, so you should send the IDOC from external system to the adapter port. Is it right?
My idx1 port is the same as my SNDPOR value in Java,but still came the error.

RFC connection from SAP R/3 to OS400 server

Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.

Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind.

Connecting a SAP-ERP-System to ADS-Server

Similar Messages

Maybe you are looking for