Connecting a videocamera to an external HDD for video download

I recently purchased a 250GB Lacie HDD to which I save downloaded raw and edited video. I was told by my Apple dealer that I should be able to connect my videocamera to the FireWire port of the Lacie HDD which in turn is connected to the FireWire port on my PowerBook G4 (daisy chaining) and then control the camera in iMovie to download video to the Lacie HDD. I have tried this unsuccessfully. Any ideas how or if this should work?
By way of information, I use a card reader which is connected to the FireWire port of the Lacie HDD for downloading digital stills to iPhoto. This works beautifully to download images to my iPhoto library which is on the Lacie HDD.
Hope someone can help!
Alan Milnes

The only way you can do that is "real time"
ie plug the camera into the computer - Start a project on the external disk -hit capture now in iMovie - start shooting.
Edit: I doubt you can daisy chain though things.
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
http://iMovie.danslagle.com

Similar Messages

Recommended external HDD for MacBook Pro 2011 15"?

Hello,
I'm looking for external HDD for new MacBook Pro 2011 15". Is there any external HDD available with Thunderbolt port? Any recommended HDD using FireWire 800 port?
Since this is m first Mac, I'm not much familiar with Mac Accessories. Any further info would be greatly appreciated.
Thanks.

That's a good drive, but not as great as those based on 3.5" hard drives. The nice thing about buying that drive is you can swap your hard drive in your MacBook Pro with the one in that case. 3.5" hard drives as desktop hard drives typically are faster, and are more suited to a desk environment. 2.5" hard drives are great for portable use. Be sure to get the DC in adapter for it to plug in the wall. There may be times you don't have enough power on the computer to keep it up.

External HDD for an Ipad?

Does anyone have any recommendations for an external HDD for an Ipad?
Also what will be better Wifi or bluetooth?
Thanks DeXTeR

Best way to do that is to download the movies on your computer. Then when you want them sync them over to the Ipad(before traveling). Thats what I do. Its the fastest way.
You could store the movies or all of Itunes on an external HD. To save room on your computer(if thats getting full). Just move the Itunes files to your external. Then downloaded movies from the computer will save there.
So its back to either from your computer or downloading from the "Cloud". Only thing again the HDD is going to do is save room on your computer if you have alot of movies. Apple Tv streams, so thats no help in this case.

What is the best way to set up an external drive for video storage

What is the best way to set up an external drive for video storage?

Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

Using an ipod as an external HDD for the MBA and also as an ipod

I have 120gb of media that I would like to carry on an ipod which I then connect to an MBA.
Is it possible for the MBA to use the ipod as an external HDD to store media on, and also use the ipod as an ipod?

With the exception of the iPod Touch and iPod Shuffle, yes. See:
http://docs.info.apple.com/article.html?artnum=61131

Do I need to buy a new external HDD for my Air?

I currently have a 2T External HDD that I have been using with my Windows computer. However, I am having problems using it with my MacBook Air - for example, I can't create new folders on the external HDD when using the Air. I read somewhere that "Mac OSX does not write to NTFS disks" (whatever that means) and that I'll need to "reformat the drive to either Fat32 or HFS" (again, I don't know what this means). I don't want to reformat the drive if that will cause me to lose the files that I already have on my external HDD. So, do I need to buy a new external HDD to use with my MacBook Air?

You CAN with the program PARAGON, however its a bit too much effort, .....external HD are cheap as dirt.
A nice 2TB 2.5" external is $117
I read somewhere that "Mac OSX does not write to NTFS disks"
It CAN, but with another APP as mentioned PARAGON
You dont have to reformat anything,.....options are PARAGON, or another HD (the easy way).
You dont have to buy another HD, however having 2 archives of your vital data you dont dare lose is important.
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim and perfect
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package) $117
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
$88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+72 00+RPM
Most storage experts agree on the Hitachi 2.5"
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Format external HDD for Macbook & Laptop

Apologies if this is not the best community for this query. Wasn't quite sure where to put this one.
I have a Western Digital Elements SE 1TB external HDD which I have been using to manually back-up files (mainly music, photos and documents) from a Dell Studio laptop running Windows Vista.
I now have a MacBook Pro and I would like to continue using my external HDD to back-up files from this too.
Can anyone tell me if there is a way to format my external HDD so that I can back-up files from both and also transfer files between the two?
If so, are there any risks associated with this?
Many thanks.

sure no problem asking questions, thats the whole point of a forum.
NTFS is older Microsoft file system (I still use it for Windows 7 so it's not OLD old) it's built for Windows specific security and therefore not mac friendly out of the box. There are 3rd party NTFS readers/writers, but unless are networking to a Windows host you don't get any advantage to NTFS on Mac. My Windows PC and Mac(s) will transfer files to one another from NTFS (on Windows) to Journaled (on Mac) and from Journaled to NTFS without incident as long as I have credentials to log into either machine from the other. On a network it doesn't matter what format I use (no special software needed), but connected directly to a computer those formats suddenly will (NTFS reader/writer software needed for Mac or Journaled reader/writer software for PC).
FAT32 is from back-in-the-DOS-day (File Allocation Table 32 bit) that has a few restrictions:
https://support.microsoft.com/en-us/kb/314463
Use FAT32 for flash drives and you will be Mac/Win/Unix cross compatible (all restrictions still apply) but I would not day-to-day use it on my "OS" drive.
If you're going to use the system on Macs and exclusively macs I would go with Mac OS Extended (Journaled). If you need to share with Windows later (connect the drive with a USB cable to your Windows box) there are 3rd party packages to allow you to read Journaled drives but for the cost it would possibly make sense buying the adapter for the network and turning it into a NAS or hosting on the Mac and let the PC log into the mac.

Formatting external HDD for both OSX Lion and Windows 7

Heys guys,
Tomorrow I will have my first Apple computer delivered after using Windows for many years. What my question is, is that what would I need to format my Western Digital Elements external HDD to in order for me to use it on both my iMac and Windows computers.
Now at Uni I have access to both Microsoft based and Apple based computers but in this first semester we will be using the Microsoft more than the Macs. I want to be able to open and edit Microsoft word files, Adobe Suite files, and other files such as MP3 on both machines no matter where I am.
I have Google searched this but failed to find what I actually want.
In advance I thank you for your replies!

Assuming you'll be plugging it into all the computers directly, FAT32 or ExFAT.
If you'll be using it as a network share, any format writable by the computer it'll be connected directly to.
(60901)

Itunes library on external hdd for mac and pc

I want to store my my iTunes library on an external hdd and use it with a Mac and a PC. All changes made on the Mac should be recognised on the PC and all changes made on the PC should although be recognised on the Mac - one library for both.
I already tried to store my library from my PC on an external HDD and then started iTunes on the Mac, pressing "alt". But I wasn't able to open the library. When I choose library.itl, the Mac just opens iTunes without opening my iTunes library.
Any ideas, how I can put all my music, videos and podcasts on the external and then use it on Mac and PC?
Kind regards,
Matthias

The only format drive that will work with both a Mac and a PC without you using additional drivers is an older format called FAT. Disk Utility can create this. Otherwise if you use Windows' NTFS you need something like NTFS3G or MacFuse, and if you use OSX's HFS format you will need MacDrive on Windows (others may also work for both PC and Mac -- those are just the ones I could remember).
Theoretically the Mac should have been able to read the .itl on the Windows NTFS drive but maybe since it found it could not write to it, it reverted to default.
Note, if anything happens to the FAT32 drive you will need to repair it using Windows. I also assume you aren't usign this drive for huge files because FAT32 has a 4GB filesize limit.
You will have to completely erase the drive to partition and re-format it.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.
Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html

Airport Extreme issue connecting through usb to freeagent external hdd

I have a brand new 15"MacBook Pro and am using an Airport Extreme for wireless internet throughout my house. That part of the system seems to work fine. My problem is that I want to connect both my printer and FreeAgent hdd to be accesses through my wireless network. When I plug in a 4 port hub everything seems fine (green light). When I plug in the Free Agent hdd the light immediately turns to blinking amber. In airport utility the hdd does not show up but I get a message which says "disk needs repair". If I plug the hdd directly into my MacBook I can can see it, read from it and write to it fine. I can't find anything that indicates that the hdd wouldn't be compatible with the Airport Extreme. Help!

You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
To mount an AirPort Disk volume, follow these steps:
1. Select the AEBSn in the Sharing section of the sidebar.
2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
3. Double click a volume that’s shown to mount it on your system.
For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

Advice request - which external HDD for Adobe Lightroom?

Hi,
I'm going to buy myself an external hdd this week, and I would be very grateful for your advice.
1) I'm shooting with Nikon D70, Canon A520, and my mobile(;]).
2) After over 1 year of shooting I have ~130GB of photos taken with these cameras + I have some negative from analog times, which I'm going to scan (I estimate them to be next ~20GB)
3) I would like to keep all of above photos on external hdd and import them into Abobe Lightroom (tagging + developing), and and of course apply retouching to some of them in PS CS2.
4) My computers are : old PC desktop with XP, on which I will be only viewing these pictures, and IBM T43 with Vista on which I'm going to do all the developing. [Yes, I know that Apple is better, and I love Apple, but I can'tafford one yet].
Given above assumptions, which external hdd from the ones I've preselected should I choose ? I'm on the budget here, and the ones that I can afford are :
WD My Book Pro 250GB USB 2.0/FireWire400/FireWire800 16MB Cache
WD My Book Premium 320GB USB 2.0/FireWire400 8MB Cache
WD My Book Essential 500GB USB2.0 8MB Cache
LaCie Porsche 500GB USB 2.0 8MB Cache
I'm asking mainly because I don't have any idea about how fast should a drive be to work with Lightroom with decent speed.
Also : should I buy FireWire controller for my T43 laptop, or will USB 2.0 be enough for my purposes ?
Thanks in advance for sharing your experience.
Chris

>Yes, I know that Apple is better, and I love Apple, but I can't afford one yet
Either a PC or MAC is fine, but you've entered a field where affordability is proportional to the number of photos you manage, the type of processing you perform and the level of security you are comfortable with. This is entirely separate of your budget.
USB2 and/or Firewire Drives work fine. From your list, I've owned both the LaCie Porsche and a WD MyBook. They both failed for different reasons. All hard drives will eventually fail. If you can't afford to lose your photo library you need some sort of redundency. The reliability of that redundency (RAID) and or speed of retrieval determines what technology is the minimum you need to afford. Or, if you have more time than budget, you can archive on DVDs. Keep in mind that even DVD's will fail over time.
The faster the drive, the faster the backup (redundency), the faster the throughput, and the faster you have access to managing and processing your image library.
Did I answer your question: No. However, whatever you get, and assuming you value your photos, make sure you get two of them so you can build some redundency into your budget. If you're feeling lucky, get the largest drive you can afford and make sure you leave yourself a lot of time for those backups.
Welcome to "photo shoebox management" of the new millenium! It ain't cheap ... :-)

External HDD (for Time Machine backup) detected but won't mount on desktop

I have been using this external HDD as my Time Machine backup for many months now. No desktop display settings have been changed (I checked), but now it won't mount on my desktop. I suspect one of my kids was banging around on the keyboard, as they have done in the past, and renamed it. Unfortunately it appears they renamed it to NULL this time around. I didn't think that was possible, but I've plugged it into 3 different Windows and iMac machines, and in all cases the external drive gets detected, but then in all cases it doesn't mount. The Volume Label does appear blank in the device properties.
Is there a way to access my drive again to rename it? Will that allow it to mount again? Or is there a way to access it to just reformat the whole darn thing?
Thanks!
Tom

I don't think it's possible to have a null name for a drive so i suspect there is a problem with it. open disk utility. does it show the name of the drive? try repairing it (repair disk not permissions). if that doesn't help you can always reformat it with Disk Utility. select the whole drive ( model, not name) and use the partition tab.

External HDD for Time Machine etc

A recent switcher (December 28), I am looking for a reliable external HDD to use as a data archive and, probably, system backup. I have a 24", 2.8GHz iMac with 500GB HDD.
Because a LaCie d2 external HDD stopped working suddenly, I'm a touch paranoid about losing my data; hence, I'm considering RAID 1 (1TB total). I've looked at various models by different manufacturers but most, if not all, seem to have 'showstopper' faults. Thus, I'm in a quandary.
I'd be grateful for any useful advice and accounts of experience with such devices in OS X, especially 10.5.

engstrom wrote:
I went with the Icy Dock external drive enclosure because people here have had success with it:
Another vote for IcyDock. Best quality external enclosure I've ever seen -- and
many Newegg customers and independent reviewers seem to agree. Google it.
I also purchased a Seagate enterprise class 500 GB hard drive to put in the Icy Dock:
[Seagate ST3500320NS|http://www.newegg.com/Product/Product.aspx?Item=N82E16822148294&ATT=22-148-294&C MP=OTC-Froogle&nmmc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Hard+Drives-_-Seagate--22148294]
Very cool! That appears to be an enterprise-class (24/7, high-reliability)
version of Seagate's second-generation perpendicular recording drives.
I have the ['workstation-class' version of that drive|http://www.newegg.com/Product/Product.aspx?Item=N82E16822148288] in my Icy Dock;
AFAIK, they're the fastest 500 GB drives available (105 MB/s, sustained).
IMO, that's the main advantage of buying the external enclosure and drive
separately: YOU get to choose the drive.
I figure that as hard drive capacities go up and prices go down I can always
replace the drive that I use in the Icy Dock - the Icy Dock has a tray that hold
the drive and you can remove the tray by pushing a button and flipping a lever,
it's very easy.
Yep, and [extra drive trays|http://www.newegg.com/Product/Product.aspx?Item=N82E16817994038] are only $16, so it's cheap & easy to keep several
drives "on tap." A drive swap takes about 30 seconds.
Looby

Limiting Space used on external HDD for Time Machine

I'm really clueless on how this works and I would appreciate your thoughts on this. I recently bought an external HDD and I want to limit the allocated space for TM to only half of the capacity. I recently formatted the external HDD to FAT32 in order for me to use it with my other systems.
Is it possible to make this work? I saw an article wherein you can create a disk image in the external HDD, will that work?
Below are some specs of my external HDD:
Objective: Use Time Machine on my 1TB External HDD while limiting the space to only 400MB for back-up.
External HDD Settings: Iomega External HDD formatted as FAT32 and Master Boot Record

Hello,
Here is the best solution I can think of without using any extra software to alter your Time Machine settings.
You could use Disk Utility to divide the 1 TB external HDD into two partitions (400 GB + 600 GB).
(/Applications/Utilities/Disk Utility.app)
Warning: Using Disk Utility to divide the drive into two partitions will erase everything on them.
Once that's done, when you reconnect your hard drive to your computer, and open Time Machine in System Settings, you could assign Time Machine to the 400 GB partition.
Here is the catch though, Time Machine cannot backup to FAT32, so you would have to format at least the 400 GB partition as "Mac OS Extended Journaled" with Disk Utility. If you want to use that drive with other non-Mac systems, best solution would be to share it over the network.
That is the best I can think of for your problem. Hope that helps.

Setting up external HDD for Time Machine...

Hi folks
I've got a 3TB external HDD and want to set it up for a Time Machine backup. Because of its size, I want to create 3 partitions so I can use it with both a Mac and PC, one NTFS, one exFAT and a Mac OS X Journaled. Would this cause any problems with the Time Machine backup because it's on a partitioned drive? Or should it really be on a single partitioned drive?
Thanks in advance
Gary

While it should work I recommend you not do it.
It is best to keep backups on their own drive, separate from any other use. Additionally 1tb seems on the small side for a TM backup. The latter the drive TM has to work with the faster back in time you will be able to keep. Remember when TM runs out of space it will delete the oldest backups.
Given the price of HDs today ( I saw a 4tb external drive at NewEgg for a little over $100 last week), 1tb drives can be had for a lot less) I can see no reason to partition the drive.
regards

Connecting a videocamera to an external HDD for video download

Similar Messages

Maybe you are looking for