Connecting AE to non-apple wireless adsl router (Belkin)

Hi,
I have an Wireless VoIP ADSL router (Belkin) that was provided by my ISP that I use for my home phone and Internet access. It is only a/b/g capable. I currently use it to wirelessly connect to the Internet and other computers on the wireless/wired network from my Macbook Pro. My Macbook Pro has my iTunes and music on it.
I am wondering if I can purchase the AE to plug in by my stereo and connect it wirelessly to the Belkin so that I can stream music to the stereo from the Macbook Pro via the Belkin (eg. Macbook -> Belkin -> AE). I would also like to use the Ethernet port on the AE by the stereo to connect a media center into the wireless network (the media center only has an ethernet port - no wireless built in).
If this won't work will I be able to just run the AE as a 2nd wireless AP and connect to it directly from the Macbook Pro when I want to play tunes through the AE? This would not be ideal as I would in theory only be able to connect to either the AE for music streaming or the Belkin for Internet access.
Can the Macbook connect to the Belkin via 802.11a or g for instance and the AE using 802.11n at the same time?
Thanks,
Graham

I am wondering if I can purchase the AE to plug in by my stereo and connect it wirelessly to the Belkin so that I can stream music to the stereo from the Macbook Pro via the Belkin (eg. Macbook -> Belkin -> AE). I would also like to use the Ethernet port on the AE by the stereo to connect a media center into the wireless network (the media center only has an ethernet port - no wireless built in).
Yes, you should be able to do this with the newer 802.11n AirPort Express Base Station (AXn). Because you have a requirement to have the AXn's Ethernet port enabled, you would just need to reconfigure the AXn as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

Similar Messages

Connecting Hardwire IP Phone to Wireless ADSL Router

I have a Mitel 5340 IP Phone that doesn't have wireless capability. I currently have a Westell 327W ADSL router with wireless capability. The router is in room X. The PC and IP Phone are in room Y. The PC works fine with wireless, but I can't connect the phone through the computer. How do I get wireless to my phone? Wondering if I can purchase a linksys router/AP that I can pick up the signal from my Westell and plug the phone into it. Or if I can purchase a CAT5 to USB adaptor to work with a wireless antenna to pick up signal.
Thoughts?
Thanks in advance!!

I am afraid, there is no wireless USB adapter that could make your IP Pone wireless, a Wireless Adapter is not just plug and play, in order to use any wireless adapter you have to install it's drivers...

Mac fails to connect to non-Apple wireless network (& changing channel?)

[sorry to post this in two forums - I think I posted it in the wrong one before]
I have a wireless network set up from a Netgear wireless router. My Windows XP computer automatically connects to the network every time. But my Mac (OS X 10.4.11) only connects about 50% of the time. The rest of the time it says "None of your trusted wireless networks could be found." Then when I click the airport icon in top right and select the network from the list, it says "There was an error joing the Airport network [network name]." When I click "Try again" a few times, it sometimes eventually connects, but other times it fails repeatedly. It is completely unpredictable.
I have been looking for solutions on the internet. Lots of other people have problems connecting Macs to non-Apple wireless networks. But no one else seems to have this exact problem: my Mac connects some of the time, but not all. Anyone have any suggestions?
(One idea I found was to change the channel that the Mac tries to use. How do I do this? I can't find "channel" anywhere under System Preferences - Network - Airport.)
All OSs are fully updated, so that is not the problem.

I travel extensively, and both my I-Mac G5 and Intel MacBook are very inconsistent in this regard. I do not think it is a router issue given the variety of networks I try to access. Additionally frustrating once a connection is made is that Internet Connect or Network Status will say I am connected to the Internet via Airport, yet Safari and Mail say I am not connected to the Internet.
Network Diagnostics has never had an answer. More often than not i end up using my cellular card. but the Mac often has issues with that too... sporadic like first poster describes.
George

All non-Apple Wireless Clients won't Connect to Time Capsule

I have a latest gen Apple 2TB TC (ME177LL/A) and have had it for about 14 months. I have never had any issue with it in the past and have perhaps only had to reset it twice in that 14 month span.
Came home from work last night to watch some Netflix on my PS4, and noticed my PS4 couldn't connect to the network. In the PS4 OS I kept getting errors that said either the network no longer existed or my password was incorrect. I simply tried to re-enter my password multiple times, but only once was the PS4 successfully able to connect. The one time it did connect the network speed indicated in the PS4 speed test was less than 200 kpbs. Within moments, the PS4 lost connection again. I was unable to reconnect.
At this point I figured I would just use the PS3 instead...same issue, however. Initially thought it was perhaps a PSN issue, but this time I never once could get the PS3 to connect. It repeatedly just said the network wasn't available or the password was incorrect. Went through the same troubleshooting steps that I did on the PS4 with no luck.
At this point I realized my Lyric thermostat had been erroring out and giving me a notification on my phone---the app on my phone wasn't able to connect to the Lyric via Wifi. Also noticed my August Connect was flashing red and was not connected. DirecTV Genie was not connected to my TC network either. Then went to my home office to discover my Slingbox was no longer connected either. Interestingly enough, though, my iPhone, MacBook Pro, Mac Mini, wife's iPhone, and MacBook all were still connected to my TC network with no issues. I performed speed tests on all of them and all were giving me well over my 60 Gbps Internet speeds. These devices never disconnected nor had any hiccups.
Essentially determined all my non-Apple devices couldn't stay connected to the TC network.
Proceeded to just reset the TC and see what would happen. None of the non-Apple devices could connect. Same "Network not found/incorrect password"
Then proceeded to perform factory reset on TC. At the same time I unplugged my Charter internet modem from power and cat5 out. Powered on modem, waited. Then powered up TC. I did this process twice through, once with auto selected 2.4/5 Ghz channels--still had issue with devices being unable to connect. The second time through, I set up the 2.4/5 Ghz bases upon the most "open" channels as shown by iStumblr (I live in fairly large luxury apartment building that has many networks -- so there are A LOT of networks).
This time I appeared to have success. One-by-one I was able to connect all my non-Apple devices to this new network with the new SSID and credentials. All devices were able to connect and the PS3/PS4 were able to connect to PSN and I was very easily able to get Netflix.
Woke up this morning and noticed all non-Apple devices were once again not connected....really not sure what's going on. Didn't have time to dive in deeper before heading to work.
Just as an FYI, I have 2 different Macs backing up to the TC via Time Machine wirelessly (the primary reason I have a TC and not another router). Also have an Asustor AS5008T connected to the TC via round robin link aggregation. All Macs are running Yosemite. All iPhones are running iOS 8.3. Offhand, I don't know the firmware the TC is running. I made no recent changes to the network or any of the hardware.
Anybody have any idea what could be the culprit? Any help would be greatly appreciated.

Whilst I said in my first post that apple had removed all the logs.. you can still get them via PC version 5 airport utility... you will need to plug in via ethernet since wireless is not working. You can also install v5 utility into a Mac but I cannot tell you how. Google it.
The other method.. and I am not at all sure if it is useful or not.
Using the airport utility in an ipad.. click on the TC, then edit.. then advanced.. Diagnostics and Usage Data.
Go into this and you will see the Airport utility has got a stack of info out of the TC..(for secret transmission to apple).
eg
I guess it is comparison between normal functionality and when it fails that will show something interesting.. meaning you will need to track the info... and it is not so easy to get it out other than as a screenshot..

Netgear DG834G V2 WIRELESS ADSL Router/newbie

Hello Everyone,
I have just signed up to eclipse to get broadband.
I have wanted to go wireless so I picked the
Netgear DG834G V2 WIRELESS ADSL Router
This needs to work with Both my PC (Medion/Intel Pentium 4E, 3200 MHz)
and my Mac (G4 400Mhz OSX) (at the moment they are connected by an ethernet lead).
Not knowing that Netgear Router doesnt support
Mac wirelessly but for the pc you can use
Netgear 802.11G WIRELESS USB Adapter – WG111
So my problem is what can I use with this
router so I can use it wirelessly with my Mac
At the netgear forums I was told I would have to get
a network adapter is this correct?
please help...
http://www.eclipse.net.uk/index.cfm?id=broadbandhardware_res
L I S T E R

As Donald said, an AirPort Extreme card will not work in your G4 400 MHz.
If your G4 400 MHz is a very early model based on the Yikes! architecture, it does not have any internal slot.
If your G4 400 MHz is based on the Sawtooth architecture, it has a slot for the original AirPort card.
You can use the information in KB 58418, Power Mac G4: How to Differentiate Between Models to determine which Power Mac G4 you have.
If your Power Mac G4 doesn't have an internal slot or if you can't get an original AirPort card, I would suggest either a Mac compatible PCI wireless card or an Ethernet wireless adapter. The Ethernet wireless adapter does not require any drivers and therefore will work with any Ethernet device regardless of OS.
Unlike Donald I do not recommend any USB wireless adapters. These require drivers that must match the version of Mac OS that you are using. Frequently these drivers are incompatible with OS X and other software installed on the Mac. Many people have tried them and given up.

Can I use a non apple wireless hard drive with time machine?

Can I use a non apple wireless hard drive with time Machine?

Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
Matt

TS2662 how do i reconnect my non-apple wireless mouse to my macbookpro?

how do i reconnect my non-apple wireless mouse to my macbook pro?

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

Connecting iMac and MacBook Pro using a non-Apple wireless router

I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.

Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Can I stream airplay thru a non-Apple wireless router

How can I connect an Airport Express to stream airplay tunes thru a non-Apple router (i.e.: CenturyLink DSL)?

You will need to connect the two via Ethernet. Set the Express to be in 'bridge' mode, connection type 'Ethernet'. This will allow you to use the Express as an extender and also for AirPlay. If it asks you for a Wi-Fi network name and password, use the ones you use for your current router (as the Express is creating another network).

Will apple router connect to a non apple computer

im having issues with my D-Link DI 624 connecting to my iphone 4s, ipod touch and ipad so im looking at changing the router over. Will the apple router work on a windows based pc? or can any one offer a solution to a dlink router not connecting to any of the above apple products?
thanks

Yes, Apple routers work fine with all non-Apple products, as do Netgear, Cisco-Linksys, D-Link, TP-Link etc.

APEx '03 and Non-Apple Wireless Client Connection Problems

Good morning. I have a 2003 vintage AirPort Extreme, running 5.5.1 firmware (due to the issues with the newer firmware discussed on this forum).
--> Wired iMax
My setup is DSL-->APEx--|
--> Apple Wireless Clients
--> Linksys w54 acting as a bridge
In order to get the Linksys working in the first place, I had to remove the WEP, not a huge deal as we live in the boonies and no one within range of the APEx. I couldn't figure out how to get anything to work with Apple wireless security outside of the Family. I have it manually set to channel 1, and radio mode to G only.
My problem basically is that non-Apple devices can see the SSID but cannot connect. The problem at hand are my kids' various PSPs & Ninendo DS's, and a little Windows CE netbook. Of course, none of these simple devices give anything helpful in terms of errors. Those three different devices all have their own version of the same error: See the SSID, try to connect, but fail.
I'd like to figure out this problem, although the simpler solution might be to just buy another cheap Linksys on craiglist and use it for the non-Apple stuff.

Bump?

WPA Security w/ Non-Apple Wireless Base?

I'm upgrading from an original Airport BS and was curious to see if anyone has purchased a wireless "N" station from another compatible brand such as Netgear?
My question is about security. If I purchase a non-Apple router, how do I set up WAP security?
Thank you!
Rick...

Setting up WPA security (or WEP for that matter) on a non-AirPort device, is pretty much the same. Most non-AirPort routers, like Belkin, D-Link, or Linksys, use a web-based administration format. Most also include a CD with automated setup for Windows-based devices.
I suggest that you download a copy of the user's manual for the particular router you are interested in and take a look at how wireless security is established before you make a purchase.

Air Port Express Joining a non-Apple Wireless N Network

So, I've been using my AEn router for some time now to join my wireless G network for iTunes and to use the ethernet port.
Decided to buy a Linksys Wireless N Dual Band router to replace my older wireless G router.
Much to my surprise and disappointment, AEn can only join an existing B/G wireless network.
Anyone heard if Apple is going to open this up to allow joining a wireless N network with a firmware update?

My Express will only 'join' my Netgear WNDR3700's 2.4ghz 'N' band. Within seconds after joining the 5ghz band it loses link. See if your Netgear's log shows "WLAN access rejected: incorrect security", as mine does. Mind you, I've matched the security settings on the AE with the Netgear a number of times. My MB Pro is at a farther distance than the AE yet has a full signal to the 5ghz band. FYI there are no cordless phones in my house and there are no other known 5ghz networks close to my house.
Berni81 wrote:
Hi Boys,
I have the same setup with my new Netgear WNDR3700 (replaces my good old WRT45G) with the AEn as client. the netgear gives me 2.4Ghz and 5Ghz 802.11n networks. i can connect the AE to both and brigde the LAN port and listen musik over analog audio connection. The only thing what drives me crazy is i need optical out, and this only work well when the AE is connected to the bgn 2.4GHz WLAN. it stops working and doing reboots if i start to play musik from itunes.
with the bgn connection it shows me a rate of 54, so no 802.11n speeds (distance AP-AE 5m sight)
maybe we have to wait for final 802.11n firmwares?
is their anybody who has the same issue with other nAPs and the AE?
best regards
Berni

Extending a non Apple wireless network

Does the wireless network on the non Apple modem/router stay on in addition to the newly created Apple wireless network?

Yes it does.
If you want it off, you will need to get into the administration settings for the modem/router to disable the wireless function.

Connecting AE to non-apple wireless adsl router (Belkin)

Similar Messages

Maybe you are looking for