Connecting AIR-ANT5160NP-R to 1602E - Do ABC positions matter?
Hello,
I am setting up my first wireless device, a point-to-point bridge to get network access to a small warehouse near one of our buildings. I had a question regarding the cable positions for the A B and C connectors on our external antenna (AIR-ANT5160NP-R).
The 1602E has the connectors labelled as follows:
However, the antenna does not have any matching markings stating which port aligns with which each letter. I looked at the guide for the antenna and it doesn't mention anything.
I have it connected (and working) right now in our test lab and they are actually plugged in differently on both ends:
I figured it didn't make much of a difference (apart from having them configured the same on both ends). Then I saw this picture explaining how to set up a 4-port antenna with a 1600 series AP:
Is there a specifc way that the 3-port AIR-ANT5160NP-R should be connected to the 3-port 1602E?
You should use a recommended dual band. But since the patch is a 3 lead, it doesn't matter what port.
Sent from Cisco Technical Support iPhone App
Similar Messages
-
Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L -
How to connect Air with Thunderbolt?
How do I connect Air with Thunderbolt?
Bought Air in Oct 2011 and Thunderbolt today.
Does Mac OS X (10.6.5) work with Thunderbolt?
Do I need a special cable other than what came in box?Hey moxiedoggy,
Welcome to Apple Support Communities! It sounds like you want to use Target Display Mode to use your iMac as a second screen to your MacBook Air. Since your said your MacBook Air is from 2011, it should have the thunderbolt, and you can connect the two computers using the following instructions:
Use an iMac with Thunderbolt as a display
If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
Make sure both Mac computers are turned on and awake.
Press Command (⌘)-F2 on the keyboard of the external display Mac.
If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
You'll want to go over the requirements for using Target Display Mode here, along with other FAQs:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Take care,
David -
Connecting AIR with external database
Is it possible to connect AIR application to the external database in MySQL technology?
Are you trying to connect to a MySQL database on a web server somewhere? If so, by far the easiest way to do so is to use some sort of application server layer (e.g. PHP, ColdFusion, Java) on the web server, and have the AIR application call the PHP (or whatever) code to get the data. That is the approach that all the links Greg has given you are talking about.
Of course, in order to make that work you need to know enough PHP/Java/ColdFusion to write that middle layer. In the example you're asking about, the information it wants to know is the name of the server that the MySQL database is running on, and the MySQL username and password for the MySQL account that your PHP code is supposed to use. There are tons of resources on the web for writing PHP code that accesses MySQL, so you'll find much more and better information in other places than what you'll find in the Adobe AIR forums.
However, maybe you want to have the MySQL server running directly on the user's computer rather than on a web server somewhere. In that case you would have a few options:
Run a web server and application server (e.g. Apache and PHP) on the user's computer and use those to connect between the AIR application and the MySQL server.
Write Java code to communicate between the MySQL server and the AIR app, and call that code using Merapi (http://merapiproject.net/)
Run the MySQL server on the user's computer and call the server directly from AIR using ActionScript. While there is no built-in support for MySQL in AIR, there is a third-party (open source) library for calling MySQL directly from ActionScript available here: http://code.google.com/p/assql/. I haven't tested it so I have no idea how complete it is, but it's a solution to consider.
However, in all three cases you're depending on some external pieces that have to be installed and loaded separate from your AIR application. (For instance, most users probably don't want a MySQL server running on their computer all the time if they aren't using your AIR app all the time -- so you'd want a way to start and stop the server, which also couldn't be done directly in AIR.) People do write applications that use external resources like this, but it's not the easiest thing to implement.
If you're really wanting to run the database locally, the best solution (assuming it works for your needs) is to use AIR's built in local SQL database engine (based on SQLite). If you've looked at that option already, and found that it doesn't work for you, I'd be interested to know more about what you're trying to accomplish that you can't accomplish with the AIR local database. -
External Antenna Mount for AIR-ANT5160NP-R
I about to embark on a project to create a wireless bridge using a pair of Cisco Aironet 1252's, which will be mounted internally, and a pair of Cisco Aironet 5-GHz MIMO 6-dBi Patch Antenna (AIR-ANT5160NP-R), which will be mounted externally.
Could anyone suggest the best way to mount the antenna? Both will be mounted to steel upper wall of the building (its brick below this). I couldn't find any specific mounting kits.My bad on the metal wall mounting, it was late and I was tired.
Now that I have slept some here is what I am thinking. Why use the MIMO patch antenna? On such a short link you can use an omni stick. Then mount this to a wall mount antenna bracket such as this - http://www.google.com/products/catalog?q=wall+mount+antenna+brackets&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&cid=6140961992914474386&ei=NCXlTKHiIYKglAfVw6XjCw&sa=X&oi=product_catalog_result&ct=result&resnum=1&ved=0CC8Q8wIwAA#
You would only need one bracket for each location and can secure the bracket to the metal wall with either large self tapping screws or using butterfly bolts.
If you are worried about your signal propogation then make sure your link is encrypted with AES and that your power is at minimum to establish the 54M link.
I would use the AIR-ANT5160V-R antenna. -
Drilling template for Aironet Antenna (AIR-ANT5160NP-R)
Hi folks,
due to a customer project I need a drilling template for the Aironet Antenna AIR-ANT5160NP-R. The customer will construct an specific mounting adapter to mount the antenna on the wall.
I hope you can help me.
Kind regards,
StefanHello, thanks for the comments.
On the Ceiling Panel 3 meters above the floor.
First AP coverage Area:
The coverages area is a rectangle 9 x 24 meters, with no more than 10 concurent users per area.
Second AP coverage Area:
The coverages area is a square 10 x 10 meters, with no more than 10 concurent users per area.
Best Regards -
Connecting Air to external monitor (Dell)
I am trying to help my boss connect his Air (2010 edition) to an old Dell monitor we have here at the office. I bought a Mini DisplayPort to VGA Adapter but when we connected everything his Mac screen didn't appear on the Dell. Is there something else we need to do? The Dell monitor is about 8-9 years old I think.
HI, Wormo, and welcome to Apple Discussions. If the broken display cable hasn't shorted anything out and damaged the logic board (and it sounds as though things may still be working properly other than the display), you should be able to hit the F7 key at the top of your keyboard to toggle between extended-desktop mode and display mirroring mode. The latter, in which the external display shows the same thing as the built-in display, is what you want, since that should enable you to see your hard drive, desktop files, menu bar and dock on the external display. You are probably in extended-display mode now.
-
How do you connect air to a projector
How do you connect the air to a projector, what cable do you need.
It depends on what type of connector the projector has, but basically you will most likley need a Mini-Displayport to HDMI, VGA or DVI connector. With that you should be able to use a "standard" cable from the projector to the computer.
As I recall, Amazon also stocks a Mini-Displayport to HDMI cable that would be a single cable--but it would require a projector that will take HDMI input. Many newer projectors have that connection, but older ones will not.
If you are hooking to multiple projectors the VGA option right now is the one that will work in virtually all cases--even if the projector has another connector, it almost always has a VGA connection to deal with older laptops. -
How do I connect air print to my Samsung SCX-3405W
How do I connect my Samsung SCX-3405 to Apple Air Print
If the printer is not AirPrint compatible, you need to use a 3rd party printing app to make it so. If Samsung does not provide such an app for this printer via the iTunes app store, there are a number of 3rd party printing apps available via the iTunes app store.
-
Hello!
Device #1: 21" iMac - Mini Displayport
Device #2: 13" MacBook Air - Thunderbolt Port
After I bought the Air, which has better performance, I have been barely using the iMac - unless I specifically need the bigger display. Anyway, I thought about combining forces and use the iMac as a display for my Air. Is there anyway I can do this? Apparently, the old iMac is not target mode enabled. If that is possible, what's the right cable for the job?
Thanks!OK - I received my new 27" iMac and connected my mid-2012 MacBook Air to the iMac via Thunderbolt. I pressed Command + F2 on the iMac to move into Target Display Mode but all I get is a nice big 27" screen of nothing (black screen). Any suggestions on what I am doing wrong?
-
Connecting Air to monitor Question
Hi guys, when using macbook air and an external monitor with the thunderbolt adapter.. do you have to put PC to sleep or shutdown when connecting/disconnecting? Or can this be done hot?
It can be done hot.
(64862) -
WLC5508 problem connect AIR-CAP1602I-R-K9
Добрый день,
Точка Air-cap1602 не может подключиться к контроллеру,
В чем может быть проблема?
Спасибо.
AP885a.92bb.97ab#sh inventory
NAME: "AP1600", DESCR: "Cisco Aironet 1600 Series (IEEE 802.11n) Access Point"
PID: AIR-CAP1602I-R-K9 , VID: V01, SN: FGL1744W6WG
AP885a.92bb.97ab# sh version
Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.2(2)JB2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 29-Jul-13 12:35 by prod_rel_team
ROM: Bootstrap program is C1600 boot loader
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)
AP885a.92bb.97ab uptime is 2 hours, 58 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g2-k9w8-mx.152-2.JB2/ap1g2-k9w8-mx.152-2.JB2"
Last reload reason:
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP1602I-R-K9 (PowerPC) processor (revision B0) with 98294K/32768K bytes of memory.
Processor board ID FGL1744W6WG
PowerPC CPU at 533Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.4.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 88:5A:92:BB:97:AB
Part Number : 73-14671-04
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC17432XWL
Top Assembly Part Number : 800-38552-01
Top Assembly Serial Number : FGL1744W6WG
Top Revision Number : A0
Product/Model Number : AIR-CAP1602I-R-K9
Configuration register is 0xF
(Cisco Controller) >show inventory
Burned-in MAC Address............................ C0:67:AF:1A:CF:A0
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 12
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V03, SN: FCW1748L07P
(Cisco Controller) >show inventory
Burned-in MAC Address............................ C0:67:AF:1A:CF:A0
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 12
NAME: "Chassis" , DESCR: "Cisco 5500 Series Wireless LAN Controller"
PID: AIR-CT5508-K9, VID: V03, SN: FCW1748L07P
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.110.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS + LDPE
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.1.0.66
Last Reset....................................... Software reset
System Up Time................................... 0 days 23 hrs 37 mins 52 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... US - United States
Operating Environment............................ Commercial (0 to 40 C)
--More-- or (q)uit
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +42 C
External Temperature............................. +22 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
Number of Active Clients......................... 0
Memory Current Usage............................. Unknown
Memory Average Usage............................. Unknown
CPU Current Usage................................ Unknown
CPU Average Usage................................ Unknown
Burned-in MAC Address............................ C0:67:AF:1A:CF:A0
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 12
(Cisco Controller) >*spamApTask7: Jan 30 16:43:11.448: 64:e9:50:af:66:70 Discarding non-ClientHello Handshake OR DTLS encrypted packet from 10.103.24.11:47484)since DTLS session is not established
*spamApTask6: Jan 30 16:43:11.556: 64:e9:50:af:66:70 Discovery Request from 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:11.556: 64:e9:50:af:66:70 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 12, joined Aps =0
*spamApTask6: Jan 30 16:43:11.557: 64:e9:50:af:66:70 Discovery Response sent to 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:11.557: 64:e9:50:af:66:70 Discovery Response sent to 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:21.552: 64:e9:50:af:66:70 DTLS connection not found, creating new connection for 10:103:24:11 (47483) 10:1:0:66 (5246)
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: called to evaluate <cscoDefaultIdCert>
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: called to get cert for CID 1301e815
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCertFromCID: comparing to row 2, certname >cscoDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: called to evaluate <cscoDefaultIdCert>
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetSshPrivateKeyFromCID: called to get key for CID 1301e815
*spamApTask6: Jan 30 16:43:21.553: sshpmGetSshPrivateKeyFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetSshPrivateKeyFromCID: comparing to row 1, certname >bsnDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetSshPrivateKeyFromCID: comparing to row 2, certname >cscoDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.553: sshpmGetSshPrivateKeyFromCID: match in row 2
*spamApTask6: Jan 30 16:43:21.879: sshpmGetIssuerHandles: locking ca cert table
*spamApTask6: Jan 30 16:43:21.879: sshpmGetIssuerHandles: calling x509_alloc() for user cert
*spamApTask6: Jan 30 16:43:21.879: sshpmGetIssuerHandles: calling x509_decode()
*spamApTask6: Jan 30 16:43:21.883: sshpmGetIssuerHandles: <subject> C=US, ST=California, L=San Jose, O=Cisco Systems, CN=AP1G2-885a92bb97ab, [email protected]
*spamApTask6: Jan 30 16:43:21.883: sshpmGetIssuerHandles: <issuer> O=Cisco Systems, CN=Cisco Manufacturing CA
*spamApTask6: Jan 30 16:43:21.883: sshpmGetIssuerHandles: Mac Address in subject is 88:5a:92:bb:97:ab
*spamApTask6: Jan 30 16:43:21.883: sshpmGetIssuerHandles: Cert Name in subject is AP1G2-885a92bb97ab
*spamApTask6: Jan 30 16:43:21.883: sshpmGetIssuerHandles: Cert is issued by Cisco Systems.
*spamApTask6: Jan 30 16:43:21.883: sshpmGetCID: called to evaluate <cscoDefaultMfgCaCert>
*spamApTask6: Jan 30 16:43:21.883: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.883: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: called to get cert for CID 2b59913d
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
*spamApTask6: Jan 30 16:43:21.884: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.884: ssphmUserCertVerify: calling x509_decode()
*spamApTask6: Jan 30 16:43:21.894: ssphmUserCertVerify: user cert verfied using >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetIssuerHandles: ValidityString (current): 2014/01/30/16:43:21
*spamApTask6: Jan 30 16:43:21.894: sshpmGetIssuerHandles: ValidityString (NotBefore): 2013/10/29/01:36:25
*spamApTask6: Jan 30 16:43:21.894: sshpmGetIssuerHandles: ValidityString (NotAfter): 2023/10/29/01:46:25
*spamApTask6: Jan 30 16:43:21.894: sshpmGetIssuerHandles: getting cisco ID cert handle...
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: called to evaluate <cscoDefaultIdCert>
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.894: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask6: Jan 30 16:43:21.902: sshpmFreePublicKeyHandle: called with 0x2c20d0e4
*spamApTask6: Jan 30 16:43:21.902: sshpmFreePublicKeyHandle: freeing public key
*spamApTask6: Jan 30 16:43:22.089: 64:e9:50:af:66:70 Allocated index from main list, Index: 441
*spamApTask6: Jan 30 16:43:22.089: 64:e9:50:af:66:70 DTLS keys for Control Plane are plumbed successfully for AP 10.103.24.11. Index 442
*spamApTask6: Jan 30 16:43:22.089: 64:e9:50:af:66:70 DTLS Session established server (10.1.0.66:5246), client (10.103.24.11:47483)
*spamApTask6: Jan 30 16:43:22.089: 64:e9:50:af:66:70 Starting wait join timer for AP: 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:22.091: 64:e9:50:af:66:70 Join Request from 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:22.092: 64:e9:50:af:66:70 Deleting AP entry 10.103.24.11:47483 from temporary database.
*spamApTask6: Jan 30 16:43:22.092: 64:e9:50:af:66:70 Join Version: = 117730816
*spamApTask6: Jan 30 16:43:22.093: 64:e9:50:af:66:70 Join resp: CAPWAP Maximum Msg element len = 100
*spamApTask6: Jan 30 16:43:22.093: 64:e9:50:af:66:70 Join Response sent to 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:22.093: 64:e9:50:af:66:70 CAPWAP State: Join
*spamApTask6: Jan 30 16:43:22.093: 64:e9:50:af:66:70 capwap_ac_platform.c:1225 - Operation State 0 ===> 4
*apfReceiveTask: Jan 30 16:43:22.094: 64:e9:50:af:66:70 Register LWAPP event for AP 64:e9:50:af:66:70 slot 0
*apfReceiveTask: Jan 30 16:43:22.095: 64:e9:50:af:66:70 Register LWAPP event for AP 64:e9:50:af:66:70 slot 1
*spamApTask6: Jan 30 16:43:22.226: 64:e9:50:af:66:70 Configuration Status from 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:22.226: 64:e9:50:af:66:70 CAPWAP State: Configure
*spamApTask6: Jan 30 16:43:22.226: 64:e9:50:af:66:70 Updating IP info for AP 64:e9:50:af:66:70 -- static 1, 10.1.0.67/255.255.255.0, gtw 10.1.0.128
*spamApTask6: Jan 30 16:43:22.227: 64:e9:50:af:66:70 Configured Static IP Address not valid for AP 64:e9:50:af:66:70
*spamApTask6: Jan 30 16:43:22.227: 64:e9:50:af:66:70 Updated IP Domain info for AP 64:e9:50:af:66:70 -- set 0, Domain
*spamApTask6: Jan 30 16:43:22.227: 64:e9:50:af:66:70 Updating IP NamServer info for AP 64:e9:50:af:66:70 -- set 0, nameserver 0.0.0.0
*spamApTask6: Jan 30 16:43:22.227: 64:e9:50:af:66:70 AP 64:e9:50:af:66:70: Invalid country code ().
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 PHY_TX_POWER_PAYLOAD: Invalid Tx Power Level 0
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 Channel 13 is invalid in the domain
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 AP 64:e9:50:af:66:70: Invalid country code ().
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 PHY_TX_POWER_PAYLOAD: Invalid Tx Power Level 0
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 Channel 161 is invalid in the domain
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 Setting MTU to 1485
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 AP 64:e9:50:af:66:70: Invalid country code ().
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 Regulatory Domain Mismatch: AP 64:e9:50:af:66:70 not allowed to join. Regulatory Domain check failed.
Allow
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 Finding DTLS connection to delete for AP (10:103:24:11/47483)
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 Disconnecting DTLS Capwap-Ctrl session 0x1702d4a0 for AP (10:103:24:11/47483)
*spamApTask6: Jan 30 16:43:22.228: 64:e9:50:af:66:70 CAPWAP State: Dtls tear down
*spamApTask6: Jan 30 16:43:22.229: 64:e9:50:af:66:70 DTLS keys for Control Plane deleted successfully for AP 10.103.24.11
*spamApTask6: Jan 30 16:43:22.236: 64:e9:50:af:66:70 Failed post decode processing of config status from 10.103.24.11:47483
*spamApTask6: Jan 30 16:43:22.236: 64:e9:50:af:66:70 State machine handler: Failed to process msg type = 5 state = 5 from 10.103.24.11:47483
AP885a.92bb.97ab#
*Jan 30 17:00:47.163: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 30 17:00:53.087: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 30 17:00:53.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.1.0.66 peer_port: 5246
*Jan 30 17:00:53.539: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.1.0.66 peer_port: 5246
*Jan 30 17:00:53.539: %CAPWAP-5-SENDJOIN: sending Join Request to 10.1.0.66
*Jan 30 17:00:53.539: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jan 30 17:00:53.539: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jan 30 17:00:53.539: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jan 30 17:00:53.539: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.1.0.66
., 1)30 17:01:11.671: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)
*Jan 30 17:01:11.671: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jan 30 17:01:11.671: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.1.0.66:5246
*Jan 30 17:01:11.715: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jan 30 17:01:11.735: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 30 17:01:11.735: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 30 17:01:11.747: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 17:01:11.779: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 17:01:12.735: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 30 17:01:12.783: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 30 17:01:12.791: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 30 17:01:13.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 30 17:01:13.783: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 17:01:13.811: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 17:01:13.819: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jan 30 17:01:13.827: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jan 30 17:01:14.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 17:01:14.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 30 17:01:14.855: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 17:01:15.855: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to upHI ,
PID: AIR-CAP1602I-R-K9 , VID: V01, SN: FGL1744W6WG(Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.4.110.0Bootloader Version............................... 1.0.1Field Recovery Image Version..................... 6.0.182.0Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2Build Type....................................... DATA + WPS + LDPESystem Name...................................... CISCO-CAPWAP-CONTROLLERSystem Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.1069Redundancy Mode.................................. DisabledIP Address....................................... 10.1.0.66Last Reset....................................... Software resetSystem Up Time................................... 0 days 23 hrs 37 mins 52 secsSystem Timezone Location......................... System Stats Realtime Interval................... 5System Stats Normal Interval..................... 180Configured Country............................... US - United States
you ahve a wrong regulatery domain on AP.
If you are in USA then the access point should be AIR-CAP1602I-A-K9
Which country are you in ??
Regards -
Beam Internet/Laptop Connect Air Card not working properly
We recently upgraded to the ATT Beam aircard as we lost our previous version on vacation. We live in a rural area and using the Laptop USB Connect Card (Beam) is the only access to the internet. When we first activiated it we were able to connect to the internest the first couple of days (Windows 7). Now, the digital read out on the Beam shows "Ready to Connect" but when opening the All Access icon to connect, we either get a "no modem/device detected" or it will say its connected on All Access but the Beam show Ready to Connect and we have no access. I've run the diagnositic too, I've deleted All Acess and reinstalled, I've unplugged and plugged the Beam back in, nothing works, I have not been able to connect to the interet with it at all. I am currently teathering off my cell phone. I'm locked into a 2 year on this Beam since I upgraded and so far its not working. Thoughts?
Hello @njames
I’m sorry to hear you’re having issues with your Air Card; I’d be glad to help you out!
If you could please send us a private message providing your
Full name
Wireless number
Best time to contact you and alternate number if available
We will reach out to you within 2 business days.
Thank you,
Charise -
Connecting AIR-AP1141N-A-K9 to AIR-WLC2112-K9
Hi there,
I'm quite new to Cisco networking, but not to networking as a whole.
We've recently had a production area covered with 5 x AP1141N which are controlled by a 2112 Wireless Controller, it provides a single WLAN for the area.
In an effort to undertand a little more about the way it works, I purchased an additional AP114N and have been working through setting it up and connecting it into the exising system.
I have the AP configured for web administration through HyperTerminal and I am now attempting to connect it to or have it recognised by the controller, but hitting my limit on this right now.
Could somebody with the knowledge please guide me through the next steps?
I can provided any additional information as required to aid your solution.
Many thanks in advance.
NathanHello and welcome...
First, it would appear if you are WEB'd into the AP this would make me beleive you order an autonomous access point instead of the LWAPP ap.
Can you confirm first the full part number of the AP.
Based your title of the POST AIR - XXX this is the autonomous part number.
You will want to configure this to LWAPP in order for the AP to join the WLC.
I hope this helps. If you find this information helpful please support the rating system.
THANKS! -
Epson BX305FW PLUS how to connect air print to this printer thanks
Help for air printer connection
Check here to see if it's compatible http://support.apple.com/kb/ht4356
airprint setup and troubleshooting http://www.apple.com/support/iphone/assistant/airprint/
Maybe you are looking for
-
IWork doesn't support arabic!! When will it support?!
When can i use iWork to write in arabic?!
-
General sluggishness since installing 10.6
I've noticed an overall sluggishness in my MacBook since I installed Snow Leopard. It's not just with certain programs, either. It's with everything. The programs I run most frequently (simultaneously) are: Google Chrome browser TweetDeck Dictionary
-
Change the arrangement of photos in a folder
I have a folder in which I have placed numerous jpgs to be printed and bound as a book. In one view mode I can arrange the thumbnails in the order I need them, in another view they don't show up in the same arrangement. Please explain how to secure t
-
IPhoto 11 does not see thumb drive when inserted into USB Port, 9 did.
I updated from iphoto 9 to 11 and updated to OSX, Previously when a usb thumb drive was inserted iphoto would see it, now irt does not, anyone have any hints for me?
-
Re: Qosmio xX770-11W - gaming performance issues
Hello I bought a Qosmio x770-11w and I have some bad fps in nearly every game I played. Even in games wich work well at my 3 years old Desktop PC. Some examples are: Left 4 Dead 2, The Witcher 2, Starcraft 2, Trine, The Elder Scrolls: Skyrim and many