Connecting AirPort Extreme 802.11n directly to my Verizon FiOS service

I want to connect my new AirPort Extreme 802.11n directly to my Verizon FiOS service. The ActionTec wireless router supplied by Verizon died, and I bought an AirPort Extreme as a replacement. When I configured the AirPort extreme, it would not connect to the internet. I have read some posts here that indicate I plug my AirPort Extreme into the ActionTec and I am OK, however the ActionTec is dead.
Are there settings for the AirPort Extreme that are unique for going straight to the internet? What am I missing? My FiOS connection is an Ethernet connection- not coax.
Here is the interesting thing- I have an old AirPort Extreme (the round cone shaped model) that I plugged into the Verizon FiOS Ethernet connection. Everything works fine- I have a wireless connection to the internet. I didn't set anything. So my assumption is that I can make the new AirPort Extreme work with the Verizon FiOS.
Any help will be greatly appreciated, as I do not know if I have the strength to go through the Verizon help desk.

Good news! My problem was solved by calling Verizon FiOS support. The service tech said an AEBS can connect straight to the FiOS Ethernet connection. He broke the "lease" on my connection, had me connect the cable from the wall to my WAN slot, and then he "leased" my network connection to my AEBS. Works like butter now.
He said that the Verizon FiOS network "leases" the network connections every 24 hours or so, and had I left my AEBS connected to the network, it would have pushed the new setting down to the AEBS.
Thanks for all of the input.

Similar Messages

Not able to see disk connected to AirPort Extreme 802.11n

I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
AirPort Extreme 802.11n Windows XP

I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
I work with Poser, and have a lot of content installed... We're talking thousands of files.
Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
In the end, I've decided this effort is a failure.
The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
But I won't be using the Airport disk for anything important. It's too slow.

AirPort Extreme 802.11n Wi-Fi doesn't connect to printer

So, I got the AirPort Extreme 802.11N Wi-Fi connected and working to my cable modem (good times), but now neither computer (PC or Mac) can connect through it to the printer (HP C4280 Aii-in-One) that we connected to the USB port on the back of it.
Any idea what we're doing wrong here? Is there something that needs to be configured within the software of the router?

Work your way through the Apple Troubleshooting Guide to see if that will help get the printer going.
Bear in mind that only the print function will be supported when your device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance etc. are not supported, so if you need these functions, you will need to connect your all-in-one directly to the computer.
The PC will need to have Bonjour for Windows installed. It's on the CD that came with the AirPort Extreme.

I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

Plenty of suggestions.. only you can find out which one is correct.
What model AE? What firmware?
Since Panasonic TV is not apple it will use SMB windows type networking.. everything but Apple does.
Are the names in the AE all SMB compatible.. ie short.. max about 20 characters.. no spaces and pure alphanumeric.
Is the security set to WPA2 Personal with a pure alphanumeric password of 10-20 characters.. more is fine if you suffer paranoia but isn't needed.
Fix the wireless channels.. so it doesn't flip flop like a dying fish.
There are only 3 channels for 2.4ghz that do not overlap, 11, 6, 1 although someone suggested 8 works well if you have heaps of interference. If you live in flat/apartment building you have heaps of interference.
Lastly is it stable if the distance is 3M direct line of sight?
If not then get a high power wireless AP and use that instead.

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

Connecting AirPort Express to AirPort Extreme 802.11n

The following steps helped me set up an AirPort Express base station connected to a set of wireless speakers with my new AirPort Extreme 802.11n base station. I’m posting this because the process was not entirely intuitive, at least not to me.
I’ll assume you have set up the AP Extreme base station to connect to the internet and run your home network and that you are connected to your wireless network.
Make sure you set-up the AP Extreme base station to broadcast in 802.11n + 802.11b/g modes, i.e. both at once. You will also have to check he setting that allows the newtork to be extended.
Reset the AP Express base station so that in runs on the factory defaults by pressing the reset button with a paper clip. Wait for it to completely restart.
Launch the AirPort Utility. You should see both your AP Extreme and AP Express base stations in the left hand column. Click on the AP Express base station you just reset. When it asks to switch wireless networks do so. Then hit continue.
On the next screen select “Connect to my current wireless network” option and hit continue.
On the following screen select the “Extend the range of my AirPort Extreme or AirPort Express network” and hit continue. Do NOT select the “Join my wireless network” option even though it says this is how you connect to wireless speakers. This is the part that was not obvious to me. When I tried this the AirPort Express base station flashed orange and wouldn’t connect despite waiting 30 minutes.
Chose the network you wish to extend from the drop down menu. My keychain supplied the password for the network.
Give your base station a name and hit continue.
Select the main base station in the list provided. This is the one connected to the internet and hit ok.
The Airport Utility software will configure the network to accept the AirPort Express base station.
Now all that’s left is to connect your wireless speakers to the AirPort Exppress base station. You can now play music through AirTunes while being connected to your fast 802.11n network.

I recently setup an Airport Express in conjuction with my Extreme Base Station. I'm not really understanding how this method enables 802.11n connection speeds (via Base Station) to the internet and also allow streaming music through the Express at 802.11b/g. It's my understanding that if you want to be able to access the internet AND stream music at the same time the Express needs to join the network. In order for the Express to join the network (able to recognize the Base Station)...the Base station needs to be changed from 802.11n only to 802.11n (802.11b/g compatable)....which essentially means your connecting to the internet at 802.11b/g. If your wanting to keep 802.11n only on the base station...you would have to create a seperate network via the Express to stream music. What this means is you CANNOT access the internet and stream music at the same time. You would have to manually change Airport in the taskbar to do one or the other.
Am I off base here? If I am missing something please let me know...because it would be great to be able to connect to the internet at 802.11n only with a multi-case rate set to 23Mbps vs. the 11Mbps (maximum) of the 802.11b/g compatable option.
I guess what is confusing me is that my setup is basically the same as what was described above..minus having the "Extended Network" being enabled. How does extending the network change things?

Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
Any suggestions so far

Hello smitra. Welcome to the Apple Discussions!
The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
o Plug the hard disk into the USB port on the back of the base station.
o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
o Select your base station, and then, choose Manual Setup from the Base Station menu.
o Click Disks in the toolbar, and then, click File Sharing.
o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
You should now be able to find this drive within Finder under the SHARED category.

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Unable to connect to an airport extreme 802.11n wifi using airport utility

I have an Airport Extreme 802.11N Wi-Fi, i connect it to my cable router and i can access the internet using the default setting on the WIFI.
However the status light is blinking yellow.
I try to use the Airport utility to connect to the Airport Extreme however i am unable to connect.
The error message as follows" An error occur while trying to access the apple wireless device. Make sure your network connection is valid and try again"
I know that i am connect to the Airport Extreme Wi-Fi, i can browse the internet but i need to access the device to change the security and SSID name etc.
Can anyone help.

Whats the planned topology supposed to look like. What is the status of each router now?

I just purshased AirPort Extreme 802.11n wi-fi I was told to get the step by step direction on the internet and I am not able to find it can you help me

I just purchased AirPort Extreme 802.11n wi-fi I was told to get a step by step direction to install this wi-fi on line but I am not able to find it. can you please help me?
Helen

See this Apple video tutorial.
http://www.apple.com/findouthow/mac/#wirelesssetup
And this Apple doc:
http://manuals.info.apple.com/en_US/airport_extreme_5th_gen_setup.pdf

How far away can you connect to the internet from Airport Extreme (802.11n)

How far can i take my Laptop away from Airport Extreme (802.11n) and still have internet connection

According to:
http://www.apple.com/au/airportexpress/
They claim the Extreme has a 45m range:
"Suppose you want to connect to the Internet with your PowerBook in an area that lies beyond the 45 metre range of your AirPort Express or AirPort Extreme Base Station"
Will you be using all N devices? G?, B? or a combination?

AirPort Extreme 802.11n as a wireless router and local network switch?

Good afternoon,
I'm curious if its possible to have the APE in wireless network mode and connect systems via hard line as well?
I have an AirPort Extreme 802.11n set to "Create a Wireless Network" mode that is attached directly to a cable modem for internet connectevity. My issue is that while all wireless devices (several iPods, two iPhones and three laptop computers) connect to the APE without issue (and have internet access), when I try to plug in a Windows 7 desktop computer via one of the ethernet jacks, Windows is unable to connect and shows the network as "unidentified," spitting back a private IP address as opposed to a local LAN (this behavior repeats for an Ubuntu Linux box as well).
Not sure if the APE is misconfigured, this is a Windows 7 issue or if its improper use on my part (though this also precludes me from connecting a gigabit switch to the APE).
Thank you,
Nathan

Properly configured, the AirPort should provide both wired and wireless network client with Internet access.
At this point, I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Airport Extreme 802.11n gone after firmware update

Started Airport Utility earlier today, just to check a password. An Apple window came up offering new firmware, 7.1.1, I think. I usually accept these offers without thought, so I let the update run. Now Airport Utility cannot detect the Airport Extreme (802.11n). The support page says to check for software up dates, but there were none.
What next?

Hello pmacdd. Welcome to the Apple Discussions!
First, try quitting, and then restarting the AirPort Utility, and then, try accessing the AEBSn.
If this doesn't solve the problem, then try connecting your computer directly, using an Ethernet cable, to one of the LAN ports of the AEBSn and then try accessing the device.

Airport Extreme 802.11n and PPTP

Hi,
I've posted this question earlier in the wrong forum. Sorry for the double post.
I'm thinking of buying an Airport Extreme basestation. A problem I have with my current setup (using Airport Express) is that I have to use an extra router between my DSL modem and the Airport to connect to my provider via PPTP. Looking at the specs for the Airport Extreme, it seems that the new base station supports PPTP. But I really want to be sure, can I use PPTP with the Airport Extreme directly, or do I need to add an extra router as I have now?
Many thanks,
Don
PowerMac G4 450Mhz DP

You probably should ask in the AirPort Extreme (802.11n) discussion area.

Airport Extreme 802.11n Base Station blocking RealPlayer 11 completely

I am trying to play this radio station (just a brasillian sports channel) on RealPlayer 11:
rtsp://real.rbsonline.com.br/liverbs/*/broadcast/rdgaucha/gaucha.rm
Which is completely blocked on my Airport Extreme 802.11n Base Station with the latest firmware update.
It even blocks when RealPlayer is configured for HTTP only.
I am using it on my iMac which is connected directly via a ethernet cable instead of wifi to the Airport Extreme 802.11n Base Station.
RealPlayer can play it fine when I plug my iMac directly to the cable modem so it proves is the router. I never had RealPlayer issues before when I was using a linksys router.
It does really feel like Apple put an intentional block on RealPlayer to stop competition.
Anyone seen this issue? Guess it is related with the BBC RealPlayer issue.

Fixed myself, problem was because I setup OpenDNS on base station, removed it now works

Connecting AirPort Extreme 802.11n directly to my Verizon FiOS service

Similar Messages

Maybe you are looking for