Connecting Airport Extreme to wired Windows

I'm interested in getting the new Airport Extreme, but I was curious how it is for connecting to Windows via ethernet. I'm specifically talking about Windows 98. Is the Airport Extreme like any typical router when it comes to the ethernet connections?

Hi nemesis_256,
The Airport works like most routers when sharing the Internet, in that it supplies an IP address to the wired and wireless clients dynamically. To configure the Airport you will need a Macintosh computer with OS 10.4.8 or later, or a windows machine with Windows XP service pack 2 or later.
John

Similar Messages

Connecting AirPort Extreme to my Windows desktop PC and MacBook

First I'd like to mention that I'm a brand new user of Macs so please excuse my ignorance. Is it at all possible to hook up my Windows PC and my Macbook Pro to the Airport Extreme so they can both share the same internet connection? I'm also pretty sure my Windows desktop PC is NOT Wifi ready. Help...thanks.
Macbook Pro Mac OS X (10.4.9)

Yes you can connect your PC via ethernet and your MBP can connect through ethernet or WiFi.

How do I connect airport extreme to seagate hard drive using windows

How do I connect airport extreme to seagate hard drive using windows?

First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?

...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices.

How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

AirPort Extreme Drivers for Windows XP???

This may be a very silly question, but I've got a new Mac Pro that will be arriving in two days and I couldn't help but wonder, "How will the AirPort Extreme WiFi card be able to connect to the Internet when I'm running Windows XP from a separate hard drive using Boot Camp?
The Internet connection in my apartment is wireless only (coming from a router upstairs in my landlord's part of the house). Are there any AirPort Extreme drivers for Windows XP? If so, I have not been able to find anything online.
Any suggestions on how to do this?
Thanks,
~Greg

Thanks for the info Stefan,
However, I don't think that the Macintosh driver CD will do me any good in this case because I am not planning on running the 32 bit version of Windows XP. I will be installing XP64 tomorrow once my CD arrives in the mail.
I've heard of quite a few people who are currently running XP64 on their Mac Pro's, but I'm also pretty sure that the driver CD created by Boot Camp will only work in Windows XP 32-bit.
If ANYONE knows of a work around for installing macintosh drivers for my super drive and airport extreme, PLEASE let me know, because I will most certainly need to be able to use my wireless card and keyboard (especially for the CD tray)
Thanks,
Greg

Connect Airport Extreme to existing router without ethernet cable

I am looking to connect my Airport Extreme to an existing router without the use of the ethernet cable. The existing router is on the ground floor whilst I would like to install the Airport Extreme in the first floor to improve WiFi range on the 1st floor. I am able to connect Airport Extreme to the router with the ethernet cable (in which case both the devices have to be close to one another on the ground floor) but unable to get Airport Extreme set up without the ethernet cable. Is it possible to connect Airport Extreme to the existing router on a non-wired basis (i.e. without the ethernet cable) and if yes, how would be I able to do it. Any help would be appreciated.

The AirPort Extreme can connect wirelessly.....IF.....your existing router is also another Apple router.
Is that the case here? If yes, what model number is your existing Apple router?
If no, you will need to continue to connect the AirPort Extreme using a wired Ethernet connection.

Connect AirPort Extreme Base Station to air card

How do you connect AirPort Extreme Base Station to Verizon Air Card?

Sorry, but the Air Card cannot be used with the USB port on the AirPort Extreme because that port will only work with a hard drive and/or a printer.
Suggest that you check with Verizon to see if they have an adapter or wireless router for the Air Card that will provide an Ethernet signal to the AirPort Extreme.

Can I use non-apple notebook to connect AirPort Extreme?

I
Can I use non-apple notebook to connect AirPort Extreme?

He might be trying to do so to promote his products or may be there was some misunderstanding.
Airport Extreme will work as a wireless router supporting upto 50 systems including Mac computers, PCs, iPad, iPhone, iPod touch, Apple TV and virtually all 802.11a/b/g/n Wi-Fi wireless devices — all at the same time.
for reference http://store.apple.com/us/product/MD031LL/A/AirPort-Extreme

Cable needed to connect airport extreme?

How do I connect airport extreme to older speakers which are connected to older receiver amp? Do I need USB to radio jack? Have Itunes on IMAC , os 10.4.11. I know I need to update os sy to 10.5. I have new Iphone. I want to use remote app to send music to speakers.

There is not an audio port on the AirPort Extreme, so it cannot be used to stream audio per your question.
An AirPort Express will do the job.

Wifi connection AirPort Extreme with IP-camera

I can't establish wifi connection Airport Extreme with IP-camera. At the same time cable connection is fine, but wifi not.
Please, give me an advise.

You need to create a wireless network on the AirPort Extreme, and then you probably will want to assign a compatible static LAN IP address to the camera so that you can port-forward from the router to the camera.

How do I connect Airport Extreme in place of Buffalo wireless router in Japan?

How do I connect Airport Extreme to replace current Buffalo wireless router? ISP is StarCat in Japan.

Hello DM1960,
Thanks for using Apple Support Communities.
To set up and configure your AirPort Extreme please follow the steps in the article below:
OS X Mavericks: Set up an Apple wireless device
http://support.apple.com/kb/PH14058
Take care,
Alex H.

How do I install a new AirPort Extreme on a Windows network?

How do I install a new AirPort Extreme on a Windows network?

To configure a new 802.11ac Extreme requires AirPort Utility for iOS or AirPort Utility for OS X.
http://www.apple.com/airport-extreme/specs/

Connecting airport extreme to macbook and windows 7 desktop

Hello,
I currently connect my macbook to the internet via airport extreme wifi. I tried to also connect my windows 7 desktop to the airport via ethernet, but the PC is saying I have no internet connection. Are there any configuration / settings I need to adjust in windows 7 to allow me to connect properly? I am a novice when it comes to home networking.
Thanks

Does your Desktop also have wireless? If so, Windows 7 configures wireless by default. You may need to set up the wired LAN settings in Windows 7. This is a guess because the several times I've installed Windows 7 on my Mac Pro it always set up the wireless by default. Until I removed the wireless setup it wouldn't let me connect via Ethernet. Apparently Windows 7 gives priority to wireless.
I'm no Windows 7 expert but this has been my observation.

How can I connect airport extremes using a wired-switch connection and have roaming capability?

My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
BTW, I have read the various documents on the roaming network topology but none seem to be a match to this.

To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
OK, got that.
Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
Not sure what you mean when you say "no roaming" in this configuration.
Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
That is correct.
However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless. If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

Connecting Airport Extreme to wired Windows

Similar Messages

Maybe you are looking for