Connecting an external drive to TC and sharing it over wifi network

I wish to connect an external hard drive to the Time Capsule USB port and share it over my home wifi network.
I can see the external HDD in Finder when it is plugged directly into any of my Macs.
I cannot see the external HDD (using either Airport Utility or Finder) when it is plugged into the Time Capsule's USB port.
I have followed all of the suggestions in these archived discussions to no avail:
https://discussions.apple.com/message/12588172#12588172
https://discussions.apple.com/message/9069546#9069546
This is my setup:
Netgear DG834n set up in 'modem only' mode
Time Capsule 2TB:
The TC is set up as the wireless router for my home network, with DHCP reservations (using MAC address) for each wireless device that needs to connect to the internet
The Time Capsule's hard disk is set up as a shared disk on the wireless network (file sharing is enabled with the Time Capsule password). I use this volume for storing all of my iTunes media files
I do not use the TC for backups, nor do I use Time Machine (I use a third party backup tool)
Freecom XS 2TB USB 2 external HDD, containing a single volume formatted as Mac OS Extended Journaled
Permissions on this volume are set as read & write for everyone
I wish to leave this drive plugged into the Time Capsule permanently and use it to backup the iTunes media files currently stored on the Time Capsule disk
Does anyone have any other suggestions?

The Thunderbolt interface is local, just like USB and firewire.. (although firewire is a bit special and did have some network ability).
The Thunderbolt drive could be shared from a computer to the network.. but you have to realise an ethernet drive has to have an OS.. it cannot live on the network as Accessible Drive.. OR NAS without having a proper OS. Thunderbolt is one interface of an OS.. but not the OS.
What you need to buy is a NAS.. look at Synology or QNAP for the most popular brands.

Similar Messages

When I connect an external drive I'd like to run a program which is on it. How could I do that?

When I connect an external drive I'd like to run a program which is on it. How could I do that?
I tried automator, but without success.
Thanks

Interesting question. Others have provided the direct answer (no, massive security hole), and a little time with a search engine finds various existing discussions of autorun-related topics (eg: here and here and here), and a link to the Do Something When tool, and there is the DeviceListener example in the Xcode kit and to adding a folder action where the volumes are mounted. See the topics for details. Haven't tried this stuff, though.

I would need to connect an external drive to my iMac computer?

I have an iMac hard drive that was purchased 1 year ago from the Apple Summit Sierra store in Reno, Nevada. I have had a lot of issues so this drive was replaced by a new one. The old hardrive contains OS 10.5.x and has appleworks which I created a lot of documents.
The Apple Summit's Genius bar installed OS 10.6.8 onto the new hard drive and now, I am NOT able to open those files that were created with the appleworks software that resided on the old hard drive. I notice that appleworks was replaced by Pages which will not open appleworks files.
So this is what I am asking the community...
1. I would like to connect the old hardrive as an external drive so I can open these documents. What is the best way to do this? Someone mentioned that I would need a "sled" which I suspect is an external casing that has it's own power and connects via USB. I don't recognize the type of plug that I would need.
2. The old apple computers could start up from the external hardrive connected to it. Is this still possible with the newer intel computers?
I would appreciate anyone's suggestions or input. Thank you...

To use the HDD as an external drive you need and external drive enclosure. It would connect with your computer via USB or FW; my preference is to have it set up for both for flexibility .Check your computer ports to see what you need.
When you buy the enclosure check to see whether it comes w/ the cables you need.
A good source to check for the HD enclosures is: http://www.macsales.com/ If you're not sure of what you need just call them; they're very helpful. There are other sources for these but OWC is my favorite.
Your old HDD is probably bootable. Once you have the drive in the enclosure connect it to the computer.
You can get some data, etc. from the old HDD to the new drive by clicking the ext. HD icon on the desktop to open & dragging whatever you want (or Copy/Paste) to your new HDD.
Alternatively you can set the external drive as Startup Disk:
Go to System Preferences>> Startup Disk. Your new external drive should show there. Click on new drive and Restart. When the computer has rebooted the external HDD (with old HDD) will now be the Startup Disk. Until you change it again in System Preferences.
Do you have the appleworks software disks? You could install that on the new HD, and just move the files from the external HD to the new drive---or is that part of the plan?
Good luck w/ this.
Message was edited by: epass

Can't connect two external drives via USB hub to the same port.

I have two external hard drives connected to my MacBook Air, along with other USB devices, using a powered USB hub. When I connect both external drives to the same port via the USB hub, one of them disconnects with an error message saying it was improperly disconnected. The same thing happens when I connect one of the hard drives and an external DVD drive via the USB hub. The two drives work fine when connected to separate ports. Other USB devices coexist with one of the drives quite happily. Can anyone explain why this is?

External drives may well require more power than a port can supply. Also, many USB hubs cannot be used for external drives. It's always best to connect an external drive directly to the USB port. If the drive enclosure has a second USB port on it, then you can daisy-chain a second drive to the first, sometimes.

I think I have blown out my USB ports. Plugged eternal drive to USB port; drive also had an AC plug which I plugged in. Screen went white; unplugged external drive (both USB and AC plug). Restarted MAC Pro. Everything came back except USB ports

I think I have blown out my USB ports. Plugged in an external drive to USB, but drive also had an AC connection which I connected. Whole screen went white; unplugged external drive (both AC and USB) and shut down MacPro. Restarted and everything came back except access to USB ports. Have tried to reset PRAM and SMC. No success. Have I blown out the electronic circuitry to my USB ports?

Thanks for the response, but ironically enough, I feel really stupid after posting that because a couple minutes after posting that my DELL mouse started working again, but I honestly don't know how long that'll last. After it started working again, I tried switch which port it's plugged into again, and the other one (the one closest to me) still isn't working. If it stops working again (which it probably will), I'll definitely take it to the Apple Store. But, for some reason almost every time I take a device to the Apple Store, it fixes the problem itself when I get there, and then stops working after I leave (like just now.)
That's happened a couple times, like when my computer was heating up alot, and when my phone's sound kept shutting off by itelf.
Anyways, I want to keep this discussion up just because I know it'll stop working soon. But, yeah, I was planning on taking it to the Apple Store anyways, but I think the earliest I can is probably Saturday or Sunday, so I'll do that then.
Thanks for the response!
Scott

DVD errors since connecting new external drive-coincidence or problem

I've connected an external drive to home unit to store footage. I feel this external is a little slow compared to my Mac but not sure how to find out.
Anyway, I create mpv files for DVD authoring. Same process as always EXCEPT the external housed footage. Build DVD as always. Now my boss has these DVD locking up or pixelating. Yet, if she plays an older disc it still works fine in her system. Her other DVD player sometimes does not recognize the disc. I've even created the mpv files and went to FT work to build the disc. It eliviated the problem but did no cure it.
This problem does not happen on all discs.
All these problems happened with the very next disc and almost all the discs that have been involving the external. Coincidence or problem.
I intend on getting a LaCie external to use. We use them at FT job and never a problem. But until then:
I'm thinking of creating a QT file on the Mac hardrive and then compress.

This might be helpful:
http://discussions.apple.com/thread.jspa?messageID=8329630&#8329630

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

I'd start by looking in system profiler.
the blue Apple icon > About this Mac > More info...
goto the hardware section. Scroll down and click on USB
See what happens when you have the device plugged in & not plugged in.
Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse. Keyboard usb ports are rather low power.
Perhaps device is taking too much power. Are devices power or unpowered? Try connecting devices to a usb hub.
Which mac do you have?
What iMac do you have?
Report system info
Blue apple > about this Mac
click on more info
click on hardware
do not copy your serial number

Losing connection to external drives, tried disc utility got a message "No live updatin...? Retried new connections; is there a way to test the external usb hub? The drives will occasionally display in Apple profile. Any help would be deeply appreciated

Losing connection to external drives, tried disc utility got a message "No live updatin...? Retried new connections; is there a way to test the external usb hub? The drives will occasionally display in Apple profile. Any help would be deeply appreciated

It's not just you, I can't authorise my phone. It seemed to go down just after I started the update (it wasn't my fault though). I am using chrome, and it does not seem to be a firewall issue, or the bannerblock issue that I read about else where, since I dont have that program installed. Strange though how the support forum is still running. If I go to http://www.apple.com/support I get nothing, but googling topics allows me to see em.

Easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

easy question I'm sure. imac hard full (500gb) mostly from iphoto. no capacity left. what are my options? I've thought of an external drive of 1tb and then a 2nd external drive of 3tb to back up both???? please help.

Those are the options - more space is more space.
Moving the iPhoto Library is simple:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

My startup disk is full?!?! This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space. I am still recieving the "Startup disk full" message. What more can I do?!?!

My startup disk is full?!?! This has been happening for a while and I have dumped 4500 jepegs from iPhoto onto an external drive to try and free up space. I am still recieving the "Startup disk full" message. What more can I do?!?!

Did you empty the Trash?
What size hard drive & how much free space. You should always have a minimum of 10-15% or more free space?
 Cheers, Tom

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

TS1398 imac connects to internet for a few mins then stops and cannot find any wifi network-other devices are connecting without problems

My imac has suddenly stopped connecting to the internet through my wifi network if I restart the machine it finds the network for a minute or 2 and then stops working and cant find any wifi networks, other devices are connecting with no problems. Any suggestions please

Try posting in the iMac forum. This is the iPod touch forum.

Viewing Shared Music over a network

Good day everyone.
My problem relates to viewing shared music over a network. I have recently gone to university with my imac. Everyone on the network can see, and listen to everyone else's music, apart from me.
I was wondering why I am unable to do this? Do people think that because I am using OS X opposed to windows, that prevents me being able to view their music?

Are you sure you are on the same network as the other users?
In System Preferences, choose Network... select the ' Active' networking method (AirPort / Ethernet etc.) then Configure. Then choose the TCP/IP tab. What details are displayed?
You need to be on the same subnet (I think!) to other users for iTunes sharing. So, for example my iBook has an IP address of 10.0.1.6, and my iMac that hosts all the iTunes library is on 10.0.1.2. If my iBook had something like 192.168.0.1 then I wouldn't be able to see the iTunes library when using my iBook - hope that makes sense?
Check with other network users what their IP settings are
Des

E-mails - viber and other apps over wifi

Hello from Greece. I have a Curve 8900 (v. 5.0.0.681) with data services in Vodafone - Greece.
I will travel in Romania, so i must disable the data services because of roaming costs.
I would like to know if there is a chance to take my e-mails, use viber and other apps over wifi mode.
Thanks in advance

You can use public wifi to access your apps.

Shared movies over wifi screen not responding

When viewing shared movies over wifi my screen goes unresponsive to the touch making pause / rewind etc impossible. Any ideas?

I have tried to wait one minute or so, to check if it will respond again, but it didnt.
But as you said, it is strange that I can open the "notfication/control center" but not able to press any button on there.
I will try to restore tonight.
Thanks

Connecting an external drive to TC and sharing it over wifi network

Similar Messages

Maybe you are looking for