Connecting an external PC hard drive

OK, I've searched the archives to see if my question had been answered but could not find an answer. That doesn't mean it hasn't...just that I couldn't find anything. Ok, I have a PC with lots of pictures. I have them on an external HD with a USB and wanted to connect the HD up to my Mac and upload them...but it won't let me. It wants to first re-initialize the puppy. Am I just stuck or how can I do this?

Doesn't like the USB bridge most likely. Mac is fussy about USB devices sometimes (and FireWire, but less so).
FAT format is supported as read/write. NTFS is read only but shows up.
Can you copy to another drive? use another USB/FW case?
http://www.macsales.com/firewire - such as these. Bare case or w/ drive.
Might be the partition table, GUID and Master Record Block are supported. Maybe a bad USB cable or port on the Mac??

Similar Messages

Lose connection to external USB hard drive after waking up from sleep

My Mac lost connection to the external USB hard drive after waking up from sleep. I can still see the folders in the hard drive in Finders, but when I double clip a folder no file within the folder is displayed. I have to reconnect the hard drive with iMac to read its contents.
May I ask how this happens and is there a solution?
I'm using Paragon NTFS for Mac OS X to read from and write to NTFS format of USB external hard drive.
Thanks!

... I un-ticked the "put hard disks to sleep when possible" option in the Energy Saver panel in the System Preferences, and it seems the problem is solved. will have to sleep and wake up my iMac to further verify if this is the solution ...
Alternative advices are always greatly appreciated!

I need to connect an external FW hard drive & digidesign 002 mixer

I need to connect an external la cie portable firewire drive & a Digidesign 002 FW 400 mixer to a macbook pro 13". Should I daisy chain with the hard drive in the middle or use a firewire hub ?

USB connections are by nature designed to be plugged and unplugged as needed.
Unless the BackupDrive is backing up, you could potentially drag the drive to the Trashcan before disconnecting the cable, and then disconnect.
The Scanner should also have no issues being unplugged.
If You don't need the keyboard while burning, You could unplug that.
The Mouse you'll likely need, to interact with the burning software, so probably that would not be a good thing to unplug.
All in all the Scanner and Keyboard should be the least hassle to unplug.
For the future you may want to buy a USB HUB so you have more USB ports you can use without having to unplug things.

Connecting an external USB Hard drive using Virtual Box

I Installed latest version of Virtual Box and created an Ubuntu Linux 12.04 guest without any hassle (after installing guest additions). My question is, I want to connect an external drive (formatted for Linux) using one of the usb ports of my Mac mini. I want my Linux OS to detect and mount this hard drive and be able to read/write to it, and even if possible, to make my VM boot from it. Is this feasible? Thanks for your help.

You might try this: http://www.zdnet.com/blog/soho-networking/turn-external-hard-drives-into-network -storage-via-usb-with-addonics-nas-adapter/322

FC Freezes when I connect several external Firewire Hard Drives

I several hard drives for video and backup. All are daisy chained but the problem is that Final Cut freezes when starting up. As soon as I turnoff one of the hard drives, FC continues to load and works ok. I did get a Belkin Hub to hopefully alleviate this but it didn't.
I would prefer not to disconnect/connect hard drives when working on specific projects. Any help would be greatly appreciated.
Thanks,
Skip

I don't think hubs are recommended. You don't say what model computer you have. If you have a tower (or a macbook Pro), I recommend getting a firewire card and spread your firewire drives over 2 busses. Do you have a camera or deck connected? If so, make sure that you put that on the seperate bus.
Also, make sure your drives are formatted macosformatted

Connectiong an external thunderbolt hard drive to an older iMac via firewire to thunderbolt adapter, as my Mac doesn't have any thunderbolt entry?

Is there a possibility to connect an external thunderbolt hard drive to my iMac (originally Leopard 10.5.8. upgraded to Snow Leopard 10.6.3) via firewire to thunderbolt adapter, as my Mac doesn't have any thunderbolt, but has two firewire entries?
Would like to use the hard drive's big data stocking capacity of 8TB, but actual WD-HDDs of such a capacity have no more other entries than thunderbolt.

Basically, no. The Thunderbolt-Firewire adapter does not work "in reverse," meaning, you have to have a Thunderbolt port on your Mac in order to use it.
Most Thunderbolt drives that I have seen also have a USB 3 port. You could use that, but on on an older Mac that does not have a USB 3 port you will be limited to USB 2 speeds.

I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB. Why do I get an error message, from time to time, upon startup stating: "disk was disconnected improperly, always eject disk before disconnecting"?

I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB, I never unplug it. Why do I get an error message, from time to time, upon startup stating, "Disk was disconnected improperly. Always eject disk before disconnecting."?

I never unplug the external harddrive, and the error message comes up only occassionaly upon startup. Maybe the USB connection gets disrupted enough to cause the computer to see it as disconnected and then reconnected while the iMac is powered.

How do I connect my iPad to a Seagate External Wireless Hard Drive?

Hi - I have a first generation iPad, IOS 5.1. I am trying to connect to a Wireless Hard Drive. My iPad sees the Wireless Device but I can't connect to that network. I can connect to the network using my Android phone. I also can't download the Seagate App - I receive an error saying I must have at least IOS 6.0. Is there a way around this problem?

If Seagate made an older version of the App that runs on iOS 5 you may be able to get it by Downloading the incompatible App to a computer running iTunes or another Device that can run the iOS 6 version, and then looking for the App in the Purchased Tab of the App Store App on the older iPad.
Assuming you use the same Apple ID on both devices.
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919

How to use AirPort Time Capsule 2TB as an external storage hard drive only?

I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.

The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?

You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How do I stream purchased movies to my Macbook Pro if I've already downloaded them and moved the source files to an external desktop hard drive and I'm away from home?

I recently added a number of movies to my iTunes library by redeeming digital copeis that came with Blu-rays. Due to limted disc space on my MacBook Pro, and for safe keeping, once I downloaded the movies, I moved the source files to an external desktop hard drive. When I'm home and I'm able to access that external HD via my home network, I'm able to watch the movies without an issue. However, if I'm away from home and I want to watch them, I'm not sure how to do that. I thought I could "stream" purchased movies from within iTunes - even after downloading them - using "iTunes in the Cloud" but can't figure out how to do that, or it simply isn't possible.
What are my options?

I understand that I can't play my downloaded movies when my external HDD is not connected becuase iTunes is looking for the downloaded files. This is not the issue. The issue is that because my HDD is not connected (as in when I'm away from home) I'd like to be able to stream the movies via the cloud.
If I hadn't downloaded the movies when I redeemed my codes, would I have been able to keep the movies online via Apple iCloud and watched them anytime by streaming them or must the movies be downloaded in order to be viewed on my MacBook? I read that Apple allows movies purchased (or redeemed) via iTunes to be stored in the cloud via Apple iCloud so that they can be viewed any time, on any device. IF this is the case, how does it work? From what I can see, it looks like movies can only be "streamed" from the cloud when useing Apple TV; on my iPhone and MacBook Pro, it looks like they need to be downloaded in order to be viewed.
Can someone clarify this for me?
Also - Michael - when you said that If I've already downloaded the film but I'm away from my external HDD I should "Delete the entry from the iTunes library so iTunes only sees the iTunes in the Cloud version", what exactly would this mean? Would this mean that I could then stream the movie from the cloud or would I have to re-download it to my Mac's internal HDD in order to watch it?
Many thanks!

External USB hard drive not being recognized

Hello! I'm sure this has been posted before, but excuse my naivety with this sort of thing...
I have a mac mini 10.5.6 (1.83 GHz Intel Core 2 Duo) and I run the Time Machine function to an external usb hard drive. The hard drive worked fine (plugged into the usb port on an older keyboard), but I went out and bought a new aluminum apple keyboard (because they look so cool ^_^ ) - I plugged the external usb drive into the keyboard and it wasn't recognized, so I tried plugging the external drive directly into the mac mini, but it is still not recognized. It is not showing up in Disk Utility or in System Profiler
Help? I'd hate to have to give up this fancy keyboard...
Thank you!
Dr. E

I believe I had my external drive plugged into the (old) keyboard because with the old mac that I had didn't have a free usb port for it - so when I got the mini I just plugged things back in where they were. But I have always had the Time Machine back up to this drive (connected to the keyboard) though it has been slow (another reason I thought the new keyboard was a good idea).
I tried restarting the computer without the alu keyboard plugged in, but same problem of no drive showing up.
Here is what System Profiler has to say about my drive:
USB2.0 Storage Device:
Capacity: 93.16 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x6830
Vendor ID: 0x04b4 (Cypress Semiconductor)
Version: 0.01
Serial Number: DEF107920F07
Speed: Up to 12 Mb/sec
Manufacturer: Cypress Semiconductor
Location ID: 0x3d130000
Current Available (mA): 100
Current Required (mA): 0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
USB:
Capacity: 92.84 GB
Available: 53.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /Volumes/USB
I don't know the brand or model as it has 'always' been in the case that in which it currently resides and I didn't physically buy the thing :\ I do know that no software was installed with the drive as I assumed that when I put all the old info from the original mac to the mini that it was the sort of thing that would carry over.
Sorry I'm not terribly helpful - Thank you!
Dr. E

I HAD AN EXTERNAL WIRELESS HARD DRIVE, I NO LONGER USE IT, BUT MY IMAC AT START UP CONTINUES TO LOOK FOR IT. IS THERE ANY WAY TO DELETE IT ?

I HAD AN EXTERNAL WIRELESS HARD DRIVE, THAT I DO NOT USE ANY MORE, BUT MY IMAC KEEPS LOOKING FOR THE HARD DRIVE AT STARTUP. IS THEIR ANY WAY TO DELETE IT, SO IT WONT KEEP LOOKING FOR IT ?

Boot in safe mode.
Log in and see whether you still have the problem. If you don't, it's caused by one of your login items or a system modification that loads at startup or login.
If the problem isn't resolved that way, other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application
See Connection Failed, Server Does Not Exist.

External USB Hard Drive Can't Be Safely Removed After Boot Camp 3.1 Install

I just wanted to report that I've done multiple installs of Windows 7 Ultimate 64-bit on my MacBook 4,1 and although I've had no problem using the cmd workaround ( http://www.zath.co.uk/how-to-install-windows-7-on-apple-mac-boot-camp/ ) to install the 64-bit Boot Camp drivers that come with the Mac OS X 10.6 Snow Leopard retail DVD, I have found that by installing the Boot Camp 3.1 drivers on the same system, under no circumstance can I click the the "Safely Remove Hardware" icon in the system tray and not receive a message saying that ... "The device 'Generic Volume' cannot be safely ejected..." and that some program or service must be using it. However, a restart doesn't solve the problem any more than logging out does.
I read somewhere that part of the fix that Boot Camp 3.1 was intended to provide was to allow safe ejecting of the Macintosh HFS+ partition. Well, my external hard drive has three partitions: one NTFS, another NTFS, and a third HFS+ for Time Machine backups. I suspect, since I haven't seen anyone else reporting this issue, that it may simply be that the Boot Camp 3.1 drivers don't take into account the possibility of an HFS+ partition on external USB devices. Anyway, a System Restore to before Boot Camp 3.1 drivers were installed completely remedies the issue.
At this point, I'm not having any trackpad issues or anything else of note with respect to the original Boot Camp 3.0 drivers that came with the Snow Leopard retail disc, so I'm fine keeping those drivers installed and allowing Windows Update to update the Intel and Marvell drivers as it recommends. I just find it slightly amusing that the Boot Camp 3.0 drivers, which supposedly did not support Windows 7 (let alone the 64-bit version) work better than the 3.1 drivers which do supposedly support Windows 7. And the funny thing (or is it?) is that you have to install the original Boot Camp drivers with the cmd workaround before you're even able to update to the Boot Camp 3.1 drivers. Hilarious stuff there.
Proprietary gamesmanship is a big reason some of us prefer the Linux "share the ownership +for free+" model of computing. Just saying...
Anyone have any proper solutions (as in, other than "don't install the updates then!")?
bkadoctaj

I have a pair of external usb drives, one formatted for NTFS and the other for HFS+ connected through an external 7 port hub. I am running Windows 7 (64 bit) with bootcamp 3.1 on a late 2009 Mac BookPro. I share the same "safely remove hardware" issues you described. I always assumed it was because my external drives were connected through my external USB hub because of a similar issue I had running Vista (64 bit), but now I can confirm directly connecting the external USB HFS+ drive also yields the same "safely remove hardware" problem. Unfortunately for me, if I regress to the Bootcamp 3.0 drivers, my audio drivers, at times, fails to load. I would need to regress to Windows Vista (64 bit), the last environment where my iSight camera, internal speakers and all other hardware performed correctly. I would gladly, at this point, live with the "safely remove hardware" issue in exchange for a working iSight camera, the one and only hardware device lost to me in the move to Windows 7.

2.5" external USB hard drive not recognized by my iMac

I have a small 2.5" external USB hard drive that my intel iMac will not mount or see. My 12" G4 Powerbook sees it fine and it is formatted in Mac OS Extended. My iMac is bootcamped and XP on my iMac sees the drive but not OS X Tiger on the iMac, (wierd) I have Tiger on both my Macs too.
Why does the intel based OS X refuse to see this external 2.5 HD. It sees a 3.5" USB one I have but not the small one. I know it is software.

Hey coby,
Well thanks for the star. Not sure I deserve it.
i then tried connecting the drive to each USB port again, and voila! i have found one it works in. I guess my computer's ports must be a little worn.
Hmm well try looking inside and see if there's some smutz in there, if the contacts are dirty or bent or worn.
i was starting to think i would have to go out and get a USB hub to give it some more power.
Is it powered off the USB? If so that actually might be a good idea since that puts a lot of strain on the connectors. Even if it's self powered it might be a good idea since it would take the strain off an obviously flakey USB.
richard

Connecting an external PC hard drive

Similar Messages

Maybe you are looking for