Connecting an eyespy247 ip camera with my HH3

I have a Home Hub 3 and want to try and get a new ip camera from eyespy247 working with it so I can access it from work and keep an eye on my dogs as well as for general security.
I can access the camera locally on my network but can't get it to work for remote access.
Someone mentioned I'd have to do something called port forwarding. While I'm no technophobe I've never dealt with port forwarding before so anyone care to point me in the right direction please?
SB77
Solved!
Go to Solution.

It would be a good idea to read this thread, as there are problems with the home hub 3.
http://community.bt.com/t5/Other-BB-Queries/homehub-3-and-cctv/m-p/175893/highlight/true#M3640
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Physical connection of multiple cameras with EVS

how i can connect 5 GIGE vision cameras with EVS and i`m using vision builder as software and i have terminal block that its manual
http://www.ni.com/pdf/manuals/374051c.pdf
the number of inputs of it not enough to the 5 cameras i wanna connect.

I have for each camera one input 24v pulse comes from PLC and I dedicated ISO 8 for it and three outputs TTL1, for camera triggering TTL2 for light triggering and TTL3 for decision making. When I`ll use the 5 cameras I`ll need 5 inputs like ISO8 and 15 outputs from TTL...which is not available with the terminal block accessory which the vision builder software i use configured only ISO 5 and ISO 8 and TTL1, TTL2, TTL3 and TTL4 for pulse generating which not enough to my whole application...how i can get such number of inputs and outputs

Logicboard replacement came with new serial that stops me from connecting w iMessage and FaceTime. Applecare ran out and now I am sure it is this issue... How can I get apple to honor the serial mess up?

The story is that I have an imac i7 that was still under Applecare when the logicboard coraked.
I brought it in for repair and got it back. Somehow imessage and facetime would never connect anymore and come up with connection errors yet everything else worked. I tried all tens or hundreds of suggestions over hte last few months and nothing worked.
So I resorted to a clean hard drive repartitioning and install of Mountain Lion.
To my surprise: it sill did not work.
That;s when I found an obscure post that I am quite certain is the problem: the poster had the exact some symptoms I had and NOTHING worked. Hrs of phone support etc. Until it dawned on him that he had a logic board replacement after which the issue occurred. He found that his serial was no longer the same as the original item and came up as invalid on the apple website and was not listed in the "About" of his iMac.
I immediately recognized the recent support symptom and motherboard replacement and checked the rest. And behold it is all exactly as he said. He had to bring it back to the service center and they put the original serial back in and everything worked again.
Here is my problem: months of troubleshooting have passed and my iMac went out of Applecare warranty. Support does not warrant an exception for the serial online and the service center wants to get paid I am not wealthy. This computer is my life and I need them to change the serial back to what it was when I purchased the machine. Can someone suggest how I get help. Apple is acting like M-soft in this respect.

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Macbook does not recognize iphone 5s when connected using usb cable that came with charger

I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
Does any one have any solution for the problem

iOS: Device not recognized in iTunes for Mac OS X
BTW, this is the Mac Pro desktop forum

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why does Apple iPad Camera Connection Kit no longer work with iOS8

Why does Apple iPad Camera Connection Kit no longer work with iOS8?

The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Using Video CAMERA with Connect pro

We reciently purchased this product and were told that it
would work with video cameras. We have a Panasonic that we are
using with vista. this camera works with Premiere Pro, and there is
nothing wrong with it. I know that Connect is not software based it
is an Internet Application. How ever i know that the OS (vista)
"sees" the camera because it works with other programs. Sorry i am
connecting with IEEE not USB
Has anyone out there in the world has success with getting a
video camera using IEEE connection to work fully. Audio and Video
coming through the camera?
Is anyon aware of drivers for either the camera or the IEEE?
And if the Connect product does not support this... WTF?
thanks

Connect does work with IEEE1394 Firewire Cams, just not with
all Firewire Cams. (USB cams also are not all working).
I would suggest to first try out the cam from different
machines with different OSs (Vista might well be the sole issue
here), also try if you can get an ordinary USB cam to work.
If all fails, you can workaround that using a virtual camera
driver, piping the firewire cam into the virtual cam and in Connect
you can load the virtual cam with the image of the Firewire cam.
Not a nice way round, but it would work.
If you google for "Adobe Connect camera compatibility matrix"
you get a "slightly" outdated list of supported cameras.

How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

Hi
This Camera has three types of ports.
- Analog-out
- USB
- I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
And Your Camera only can send Photos via the USB-connection - NO VIDEO.
So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
There are no real way around this.
Yours Bengt W

Digital Video Camera with USB connection

If anyone can help me please let me know. I own a Sony Digital Video Camera that's 3 years old. It connects to my iMAC through a USB port. I can not figure out how to load my videos to iMovie. Is this camera too old? When I connect the USB port nothing happens; nothing appears on my desktop.

George,
i'm not sure if you can download Image Capture from the Apple Website separately or if it comes as a total download of a specific version of OSX. If you have the original system discs that came with your computer, maybe that would have it, or worst case, an option to "Restore Software." Since you camera records to a DVD, you have another option: Do a Google search for MPEG Streamclip and download it (free). Basically, MPEG Streamclip will convert the files on the DVD back to DV files for editing in iMovie. I don't have any first-hand experience with a DVD camera, so you might also need to download Apple's MPEG-2 Playback Component ($20 from Apple's site) if the video on your DVDs is in MPEG-2 format. Come to think of it, I downloaded some MPEG movies from my digital still camera (it takes simple movies) using Image Capture and I still needed to use both MPEG Streamclip and the Apple Component to get it into iMovie, so maybe skip Image Capture and go for these two programs. I know it should be easier to do than this, but unfortunately getting video back off of a DVD is not what Apple wanted you to do. They setup their movie edit programs to accept DV files. The movies on a DVD are already highly compressed, so you actually need to reverse the process and get these compressed movies back to DV. Most PC computers allow, and even suggest, that you import MPEG movies for editing, but that is toally backwards. That explains why the PC discussion boards are filled with toally frustrated and confused people. Most PC computers still don't come with Firewire. They just don't get it.

HT4101 When I try to download my pics from my camera with the iPad connection kit, I get a message saying that my device requires too much power.

When I try to download my pics from my camera with the iPad connection kit, I get a message saying that my device requires too much power.

What model iPad? I upgraded my mini and used the SD card lightning cable last night to transfer raw photo images without any problem.

I have a roboteq hdc 2450 and want connect to labview but have no idea how to do so. I have the drivers that came with it will it work to interface with labview?

I have a roboteq hdc 2450 and want connect to labview but have no idea how to do so. I have the drivers that came with it will it work to interface with labview?

You can create your control code in LabVIEW and then use a Call Library Function Node to communicate with your roboteq DLL. The first thing to do though, is check to see if Roboteq offers LabVIEW drivers.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

HT4101 my lightening connection from my ipad mini to camera with usb deleted the pics from my camera and did not put them on the ipad

lightning connection from my ipa mi to camera with usb delted the pics fom my camera and they are not ony ipad

Where did the movies come from?
For what you said you should be easily be able to do what you want except for:
"remove them from the ipad but still have access to them for viewing on the road or at hotel"
Home sharing only works wehn the devices are connected to the same network
Understanding Home Sharing
If they are iTunes purchases, you should be able to redownload most iTunes purchases on the road if you have an internet connection by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.

The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.

I found out that I have 2 female ends, my question is where can I find the adapter with 2 male connectors? and what about power supply to monitor?

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart

How many connections supports a web interface with each camera and how many Adobe Encoder clients does AMS support? AMS Standart. We need connect by Adobe Encoder many people. what is differences between Adobe Media Server 5 Professional, Adobe Media Server 5 Standard and Adobe Media Server 5 Extended?

For the detailed list of differences across editions refer this link
http://www.adobe.com/in/products/adobe-media-server-family/buying-guide-comparison.html

Connecting an eyespy247 ip camera with my HH3

Similar Messages

Maybe you are looking for